BEVERAGE INDUSTRIAL GASES OIL & GAS DESALINATION CUSTOMER SERVICE AIRCODIET

Water heated CO2 vaporizer

Energy-free vaporization of liquid carbon dioxide

Water heated CO2 vaporizer Scope of supply Vaporizer benefits

Water Heated CO2 Vaporizer is a shell and Fully automatic controls include:
tube heat exchanger in which circulating water • water flow switch • Saves Energy - No electricity or steam
gives off its heat to vaporize liquid CO2. Be- • shut-off valve needed for vaporization duty. CO2 vapori-
cause any water which requires cooling can be • vapor CO2 temperature switch zing water is cooled during processing –
used, an important secondary benefit can be • vapor CO2 pressure switch actually reduces the plant cooling load.
realized in the reduction of the plant refrigera- • safety valve
• Fully Automatic Operation - No freeze-up.
tion load.
If water flow is interrupted or CO2 gas tem
Control panel consists of:
perature or pressure drops below the preset
Completely packaged, the unit includes all • on/off switch limit, the liquid CO2 is shut off and an alarm
controls necessary for fully automatic opera- • light indicating the vaporizer is is sounded.
tion. Any interruption in the water flow or operating
drop in the CO2 gas temperature or pressure • alarm to alert operator when water • Minimum installation costs - Unit is pack
beyond the preset limit will automatically result flow is interrupted aged with all necessary controls and valves.
in the liquid CO2 being shut off and an alarm • alarm to alert operator when CO2
is activated to notify operators. vapor pressure or temperature drops • Low maintenance - No electrical heating
below preset limit element to replace. Very few moving parts.

union.dk
 BEVERAGE INDUSTRIAL GASES OIL & GAS DESALINATION CUSTOMER SERVICE AIRCODIET

Type: Size (vaporizer Order number:

Design codes: capacity):
WHV, 110VAC SS 1000 lbs/hr P0655-WHV-1000-1
• ASME - Designed and constructed to the
ASME code requirements. Removable stain- WHV, 220VAC SS 1000 lbs/hr P0655-WHV-1000-2
less steel tube bundle is constructed with WHV-, 24VDC SS 1000 lbs/hr P0655-WHV-1000-3
a Maximum Allowable Working Pressure
(MAWP) of 350 psig (24.6 kg/cm2) or 24 WHV-, 110VAC SS 2000 lbs/hr P0655-WHV-2000-1
barg. The shell is constructed of stainless WHV, 220VAC SS 2000 lbs/hr P0655-WHV-2000-2
steel.
• PED (optional) WHV, 24VDC SS 2000 lbs/hr P0655-WHV-2000-3
WHV, 110VAC SS 3000 lbs/hr P0655-WHV-3000-1
WHV, 220VAC SS 3000 lbs/hr P0655-WHV-3000-2
Technical specification: WHV, 24VDC SS 3000 lbs/hr P0655-WHV-3000-3
Water Temperature inlet 70°F (21,1°C) WHV, 110VAC SS 4000 lbs/hr P0655-WHV-4000-1
Water Temperature outlet 60°F (15,6°C) WHV, 220VAC SS 4000 lbs/hr P0655-WHV-4000-2
GCO2 outlet 50°F (10°C) WHV, 24VDC SS 4000 lbs/hr P0655-WHV-4000-3
LCO2 Temperature inlet -8°F (-22°C) WHV, 110VAC SS 5000 lbs/hr P0655-WHV-5000-1
LCO2 Pressure inlet 250 psig (17.2 barg) WHV, 220VAC SS 5000 lbs/hr P0655-WHV-5000-2
Control Voltage – 3 options 110VAC/220VAC/24VDC WHV, 24VDC SS 5000 lbs/hr P0655-WHV-5000-3
Frequency 50/60 Hz WHV, 110VAC SS 6000 lbs/hr P0655-WHV-6000-1
Degree of protection NEMA12 ≈ IP 55 WHV, 220VAC SS 6000 lbs/hr P0655-WHV-6000-2
Connections on CO2 and water in/outlet NPT - National Pipe Thread Taper and flange WHV, 24VDC SS 6000 lbs/hr P0655-WHV-6000-3

Note: For each size you can choose the desired control voltage designated on the type number

Capacity Weight A B C D E F G

Model No. lb/hr kg/hr lbs kg ft mm ft mm ft mm in mm in mm in mm in mm

WHV-1000 1000 450 230 100 5'-3'' 1600 1'-11'' 590 3'-4'' 1020 3'-10'' 1170 1½* 38 3/4* 19 1½* 38
WHV-2000 2000 910 400 180 6'-1'' 1850 1'-11'' 590 3'-4'' 1020 4'-4'' 1320 1½* 38 3/4* 19 1½* 38
WHV-3000 3000 1360 460 210 6'-5'' 1950 2'-2'' 660 3'-4'' 1020 4'-10'' 1480 2 ** 51 1* 25 1/2 2* 51
WHV-4000 4000 1810 620 280 5'-6'' 1680 2'-2'' 660 3'-6'' 1070 3'-11'' 1200 3 ** 76 1* 25 1/2 2* 51
WHV-5000 5000 2270 660 300 5'-11'' 1800 2'-2'' 660 3'-6'' 1070 4'-6'' 1370 3 ** 76 1* 25 1/2 2* 51
WHV-6000 6000 2720 720 330 6'-7'' 2000 2'-2'' 660 3'-6'' 1070 4'-11'' 1500 3 ** 76 1* 25 1/2 2* 51

* = water inlet/outlet connections are N.P.T. connections

** = water inlet/outlet connections are 150# R.F. flange connections

Flow Diagram Dimensions:

Vapor CO2 out Water out

Water in Liquid CO2 in

Union Engineering’s main activities are worldwide sales, engineering, installation and commissioning of modular and individually designed CO2 plants.
We are headquartered in Denmark and have subsidiaries in China, Brazil and USA.
Union Engineering a/s · Snaremosevej 27 · DK-7000 Fredericia · Denmark. Tel.: +45 76 20 77 00 · Fax: +45 76 20 78 00 · Email: [email protected] · www.union.dk