KSP INC.

INSPECTION REPORT - PRODUCTION

DATE PART NAME DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)
CHECKED BY: APPROVED BY:
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name P. Code No.
Sr. No. Parameter Specification Observation
LQC Engg. Quality Head
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Ring 9.87 Inch P. Code No. 89733

Sr. No. Parameter Specification Observation

Ring cutting and welding-

1 Wire Dia (3.55±0.1)mm

2 Ring Dia (253±2)mm
3 Appearance No Sharp Edge
No White Rust
No out weld
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Ring 11.87 Inch P. Code No. 89733

Sr. No. Parameter Specification Observation

Ring cutting and welding-

1 Wire Dia (3.55±0.1)mm

2 Ring Dia (304±2)mm
3 Appearance No Sharp Edge
No White Rust
No out weld
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Ring 13.87 Inch P. Code No. 89733

Sr. No. Parameter Specification Observation

Ring cutting and welding-

1 Wire Dia (3.55±0.1)mm

2 Ring Dia (352±2)mm
3 Appearance No Sharp Edge
No White Rust
No out weld
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Ring 15.87 Inch P. Code No. 89733

Sr. No. Parameter Specification Observation

Ring cutting and welding-

1 Wire Dia (3.55±0.1)mm

2 Ring Dia (405±2)mm
3 Appearance No Sharp Edge
No White Rust
No out weld
LQC Engg. Quality Head
 KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Gi Ring 9.87 inch (89733) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

S.NO. OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

1 Ring Making Ring Wire (3.55±0.1)

mak- Dia mm
ing
2 M/C Appea- No White
rance Rust

3 Ring Butt Wire (253±2)

Welding Weld- Dia mm
ing
4 M/C Appea- No sharp
rance edge
No out
weld
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Gi Ring 11.87 inch (89733) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK
NAME AFTER FOUR DEFECT
DIMENSION (START) (END)
HOURS

1 Ring Making Ring Wire (3.55±0.1)

mak- Dia mm
ing
2 M/C Appea- No White
rance Rust

3 Ring Butt Wire (304±2)

Welding Weld- Dia mm
ing
4 M/C Appea- No sharp
rance edge
No out
weld
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Gi Ring 13.87 inch (89733) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
M/C REFERANCE FOR PART OBSERVATION LOA PART VISUAL
S.NO. OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK
NAME AFTER FOUR DEFECT
DIMENSION (START) (END)
HOURS

1 Ring Making Ring Wire (3.55±0.1)

mak- Dia mm
ing
2 M/C Appea- No White
rance Rust

3 Ring Butt Wire (352±2)

Welding Weld- Dia mm
ing
4 M/C Appea- No sharp
rance edge
No out
weld
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Gi Ring 15.87 inch (89733) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
M/C REFERANCE FOR PART OBSERVATION LOA PART VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)

1 Ring Making Ring Wire (3.55±0.1)

mak- Dia mm
ing
2 M/C Appea- No White
rance Rust

3 Ring Butt Wire (405±2)

Welding Weld- Dia mm
ing
4 M/C Appea- No sharp
rance edge
No out
weld
CHECKED BY: APPROVED BY:
23
21

23

23

15

48

23

15
23
21

23

23

15

48

23

15
23
21

23

23

15

48

23
15
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Tomato Tower P. Code No. 89723
Sr. No. Parameter Specification Observation
Wire/Leg cutting :-

1 Wire Dia (2.8±0.05)mm

2 Leg Length (838±3)mm
3 Appearance No white rust
No wire bend
No sharp edge

Ring R1 cutting & welding :-

1 Wire Dia (2.8±0.05)mm

2 Ring Dia (304±5)mm
3 Appearance No white rust
No sharp edge
No out weld
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Tomato Tower P. Code No. 89723
Sr. No. Parameter Specification Observation
Ring and Leg Assembly :-

1 Total Height (838±3)mm

2 Dimension 1&2 (229±2)mm
3 Dimension 3 (373±5)mm
4 Appearance No sharp edge
No wire bend
No melt wire
No spot burr
LQC Engg. Quality Head
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Tomato Tower P. Code No. 89723
Sr. No. Parameter Specification Observation
Ring R2 cutting & welding :-

1 Wire Dia (2.8±0.05)mm

2 Ring Dia (241±2)mm
3 Appearance No white rust
No sharp edge
No out weld

Ring R3 cutting & welding :-

1 Wire Dia (2.8±0.05)mm

2 Ring Dia (177±2)mm
3 Appearance No white rust
No sharp edge
No out weld
LQC Engg. Quality Head
 KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Tomato Tower (89723) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK S.NO.
DIMENSION (START) HOURS (END)

1 Wire/Leg Wire Wire (2.8±0.05) 6

cutting cutt- Dia mm

ing

2 M/C Leg (838±3) 7

Length mm

3 Appea- No white 8

rance rust

No wire

bend 9

No sharp

edge

4 Ring Ring Wire (2.8±0.05)

Making Mak- Dia mm 10

ing

5 M/C Appea- No white

rance rust 11
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Tomato Tower (89723) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

S.NO. OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

12 Dimen- (373±5)

sion mm

13 Appea- No sharp

rance edge

No wire

bend

No melt

wire

No Spot

burr
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Tomato Tower (89723) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)

Ring Butt Ring R1 (304±5)

Welding weld- Dia mm

ing

M/C Ring R2 (241±2)

Dia mm

Ring R3 (177±2)

Dia mm

Appea- No sharp

rance edge

No out

weld

Ring & Multi Total (838±3)

Leg spot Height mm

Assembly weld-

ing Dimen- (229±2)

M/c sion mm

1&2
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Ms Barrel (CS753) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK S.NO.
DIMENSION (START) HOURS (END)

1 Sheet Shear- Sheet (0.4±0.03) 7

Shearing ing Thickness mm

M/C

2 Sheet (280X220)

Size ±1 mm

3 Appea- No sharp 8

rance edge

4 Sheet Roll- Height (280±1)

Rolling ing mm

Appea- No sheet

rance broken

No dent 10

6 Barrel Spot Barrel (69.5±0.5)

Centre Weld- Dia mm

Joint ing

M/c
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

S.NO. OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Ms Barrel (CS753) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)

Appea- No sharp

rance edge at

joint

No out

weld

Top Ring Spot Appea- No sharp

Welding Weld- rance edge

ing No spot

M/c burr

Bottom Spot Total (284±1)

Cap Weld- Height mm

Weld- ing

ing M/c Appea- No spot

rance burr

No sharp

edge
CHECKED BY: APPROVED BY:
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Ms Barrel P. Code No. CS753
Sr. No. Parameter Specification Observation
Sheet shearing for Barrel:-

1 Sheet thickness (0.4±0.03)mm

2 Sheet size (280X220)mm
3 Appearance No sharp edge

Sheet Rolling:-

1 Height (280±1)mm
2 Appearance No sheet broken
No dent
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Ms Barrel P. Code No. CS753
Sr. No. Parameter Specification Observation
Barrel Bottom Cap Welding:-

1 Total Height (284±1)mm

2 Appearance No spot burr
No sharp edge
No welding open
LQC Engg. Quality Head
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Ms Barrel P. Code No. CS753
Sr. No. Parameter Specification Observation
Barrel Centre Joint:-

1 Barrel Dia (69.5±0.5)mm

2 Appearance No sharp edge
at joint
No out weld

Top Ring Welding:-

1 Appearance No sharp edge

No spot burr
LQC Engg. Quality Head
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Wire Box P. Code No. 78484497
Sr. No. Parameter Specification Observation
Bottom frame welding:-
1 Block Size (21X19)±1mm
2 Appearance No spot burr
No melt wire

Frame partition (6pcs):-

1 Frame Size (43X114)±1mm
2 Appearance No wire broken

Main frame welding:-

1 Wire Block Size 1 (28X20)±1mm
2 Wire Block Size 2 (36X28)±1mm
3 Appearance No spot burr
No melt wire
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Wire Box P. Code No. 78484497
Sr. No. Parameter Specification Observation
Main frame joint:-
1 Appearance No spot burr
No melt wire

Gulli lock welding in the middle of block 1 (Both side):-

1 Block Size (28X17)±1mm
2 Dimension (4.5±0.5)mm
3 Appearance No spot burr
No melt wire

Bottom&main frame welding:-

1 Appearance No spot burr
No melt wire
No out weld
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Wire Box P. Code No. 78484497
Sr. No. Parameter Specification Observation
Bottom&main frame welding:-
1 Appearance No spot burr
No melt wire
No out weld

Grinding:-
1 Box Length (114±1)mm
2 Box Width (43±1)mm
3 Box Height (120±1)mm
4 Appearance No sharp edge
No broken
LQC Engg. Quality Head
 KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK S.NO.
DIMENSION (START) HOURS (END)

1 Wire Wire Wire (1.6±0.05) 7

Cutting cutt- Dia mm
ing
2 M/C Wire (315±1) 8
Length 1 mm

3 Wire (220±1)mm
Length 2 mm

4 Wire (133±1)
Length 3 mm

5 Appea- No sharp
rance edge
No wire
bend

6 Gulli Lock Man- Wire (114±1)

Wire ual Length mm
Bending
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

S.NO. OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK S.NO.
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

Bottom Spot Block (21X19)±1

Frame Weld- Size mm
Welding ing
M/c Appea- No spot burr
rance burr
No melt
wire

Frame Man- Frame (43X114)±1

Partition ual Size mm
(6pcs)
Appea- No wire
rance broken

Main Frame Spot Wire Block (28X20)±1

Welding Weld- Size 1 mm
ing
M/C Wire Block (36X28)±1
Size 2 mm
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK S.NO.
NAME AFTER FOUR DEFECT
DIMENSION (START) HOURS (END)

Dimension (114±1)
mm

Appea- No crack
rance No tool mark

Main Frame Spot Appea- No spot

Joint Weld- rance Burr
ing No melt
M/c wire

Gulli Lock Spot Block (28X17)±1

Wire Welding Weld- Size mm
(Both Side) ing
Dimension (4.5±0.5)
mm

Appea- No spot Burr

rance No melt
wire
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)

Inner (8±0.05)
Hole mm
Dia
Appea- Gulli fitting
rance should
be ok
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

Appea- No spot
rance Burr
No melt
wire

Main Frame Wire Frame (302X119)

Wire Cutt- Size ±1mm
Trimming ing
M/c Appea- No crack
rance No tool mark

Frame Power Bend (38±1)

Bending 1 Press Length mm
M/c
Appea- No crack
rance No tool mark

Frame Power Bend (43±1)

Bending 2 Press Length mm
M/c
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK
NAME AFTER FOUR DEFECT
DIMENSION (START) HOURS (END)

Bottom & Spot Appea- No spot

Main Frame Weld- rance Burr
Welding ing No melt
M/c wire
No out
weld

Grinding Lan- Box (114±1)

cer Length mm
M/c
Box (43±1)
Width mm

Box (120±1)
Height mm

Appea- No sharp
rance edge
No wire
broken
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Gi Plant Link Support 61cm DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED (07361)

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK S.NO.
DIMENSION (START) HOURS (END)

1 Wire Wire Wire (2.95±0.05) 1

Cutt- cutting Dia mm
ing M/C
2 Wire (930±1) 2
Length mm

3 Appea- No sharp 3
rance edge
No wire
bend

4 Wire Man- Length 1 (610±1) 4

Bending ual mm

5 Length 2 (225±1) 5
mm

6 Length 3 (27±1)
mm 6
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

S.NO. OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK S.NO.
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

7 Length 3 (60±1) 1
mm

Appea- No pvc 2
rance broken/

damage

3
8 Wire Man- Appea- Visual

Balance ual rance ok

6
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
DATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A DATE

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
S.NO. OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK S.NO.
NAME AFTER FOUR DEFECT
DIMENSION (START) HOURS (END)
CHECKED BY: APPROVED BY:
 KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Gi Plant Link Support 100cm DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED (07372)

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION NAME PARAMETER SAMPLE OBSERVATION AFTER FOUR OBSERVATION DEFECT REMARK
DIMENSION (START) HOURS (END)

Wire Wire Wire (3.3±0.1)

Cutt- cutting Dia mm
ing M/C
Wire (1225±1)
Length mm

Appea- No sharp
rance edge
No wire
bend

Wire Man- Length 1 (1000±1)

Bending ual mm

Appea- No pvc

rance broken/

damage

Wire Man- Appea- Visual

Balance ual rance ok

 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

REFERANCE FOR PART (MID) LOA PART

OPERATION M/C PARAMETER SAMPLE OBSERVATION OBSERVATION OBSERVATION VISUAL REMARK
NAME DIMENSION (START) AFTER FOUR (END) DEFECT
HOURS

Wire Wire Wire (2.95±0.05)

Cutt- cutting Dia mm
ing M/C
Wire (930±1)
Length mm

Appea- No sharp
rance edge
No wire
bend

Wire Man- Length 1 (610±1)

Bending ual mm

Length 2 (225±1)
mm

Length 3 (27±1)
mm
 CHECKED BY: APPROVED BY:

KSP INC.
INSPECTION REPORT - PRODUCTION
ATE PART NAME Wire Box (78484497) DOC NO. KSP/QA/F-05A

HAND FREE SCATCH OF DEFECTED ZONE IF REQUIRED

(MID)
REFERANCE FOR PART LOA PART
M/C OBSERVATION VISUAL
OPERATION PARAMETER SAMPLE OBSERVATION OBSERVATION REMARK
NAME AFTER FOUR DEFECT
DIMENSION (START) HOURS (END)
CHECKED BY: APPROVED BY:
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Plant Link Support 76cm P. Code No. 7362
Sr. No. Parameter Specification Observation
Wire cutting & bending:-
1 Wire Dia (3.3±0.1)mm
2 Dimension 1 (760±1)mm
3 Dimension 2 (380±1)mm
4 Dimension 3 (27±1)mm
5 Dimension 4 (60±1)mm
6 Appearance No sharp edge
No pvc damage/broken
Visual ok
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Plant Link Support 35cm P. Code No. 7436
Sr. No. Parameter Specification Observation
Wire cutting & bending:-
1 Wire Dia (2.95±0.05)mm
2 Length 1 (350±1)mm
3 Length 2 (215±1)mm
4 Length 3 (27±1)mm
5 Length 4 (110±1)mm
6 Appearance No sharp edge
No pvc damage/broken
Visual ok
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Plant Link Support 45cm P. Code No. 7360
Sr. No. Parameter Specification Observation
Wire cutting & bending:-
1 Wire Dia (2.95±0.05)mm
2 Dimension 1 (450±1)mm
3 Dimension 2 (170±1)mm
4 Dimension 3 (27±1)mm
5 Dimension 4 (60±1)mm
6 Appearance No sharp edge
No pvc damage/broken
Visual ok
LQC Engg. Quality Head
 Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Plant Link Support 60cm P. Code No. 7371
Sr. No. Parameter Specification Observation
Wire cutting & bending:-
1 Wire Dia (3.5±0.1)mm
2 Dimension (600±1)mm
3 Appearance No sharp edge
No pvc damage/broken
Visual ok
 LQC Engg. Quality Head
Date
Deptt. Quality
Doc. No. KSP/QA/F-08C
KSP INC FIRST PCS. INSPECTION REPORT Revision no 0
Issue No 1
Issue date 11/10/2015
Revision Date 4/2/2019
Article Name Gi Plant Link Support 100cm P. Code No. 7372
Sr. No. Parameter Specification Observation
Wire cutting & bending:-
1 Wire Dia (3.3±0.1)mm
2 Dimension (1000±1)mm
3 Appearance No sharp edge
No pvc damage/broken
Visual ok
LQC Engg. Quality Head