E96 bt, E96, E9,

E66 bt, E66, E6

security systems

User manual instruction

StarLine E96, E66

Contents
General description................................................................................. 8
Specification........................................................................................... 12
Light and sound indication................................................................... 13
Complex control using the remote key................................................ 14
Value of remote key pictograms...................................................................................15
Main control commands from the remote key........................................................17
Cursor menu.........................................................................................................................19
Operation modes.................................................................................... 20
«Security on» mode.......................................................................................................... 20
«Security off» mode...........................................................................................................21
«Alarm» mode..................................................................................................................... 22
«Panic» mode...................................................................................................................... 22
«Slave» mode...................................................................................................................... 22
«Hands free» mode........................................................................................................... 23
Service mode...................................................................................................................... 23
«Drive prohibition» function..........................................................................................24
«Engine starting» function.............................................................................................24
Function «Engine starting preheater»........................................................................27
Function «Turbotimer».................................................................................................... 28
Change settings...................................................................................... 29
Registration of remote keys, tags and smartphones.......................... 30
Emergency security deactivation......................................................... 34
Change of owner authorisation code................................................... 37
Owner authorisation code..................................................................... 39

2
 short user manual

Attention!
Prior to operation of the security system carefully read this manual
paying special attention to the sections marked and determine
whether this security system is suitable for your car, for which
following the car manufacturer’s requirements and the car operation
manual.
If you could not determine whether this security system can be
installed on the car, return it to the seller within 14 days after purchase.
The security system is a complicated technical device implying
connection to the car circuits related to engine operation.
The security system should be installed only by specially trained
qualified specialists.
Mounting, programming, maintenance, repair and disassembly-
assembly of the security system shall not be carried out by persons
who are not qualified specialists and have not passed training and
knowledge test in safety rules.
During security system parameter programming, the set parameters
should not contradict the requirements of the car operation manual.
The user bears full responsibility for damage incurred to people,
animals and assets as a result of inappropriate use of the security
system or use with violations of the safety requirements specified in
this manual.
The manufacturer shall should not be responsible for losses and
injuries caused by failure to observe the safety rules and requirements
outlined in this manual.
To avoid possible misunderstandings, keep the documents enclosed
to the security system at sale. Check filling-in of the warranty slip,
include the date of sale and seller’s stamp. If there is no sale (purchase)
date, the warranty period is counted from the date of security system
manufacture.

3
StarLine E96, E66

If your security system has a remote key or a wireless tag:

• Do not carry the remote key or tag on the same bundle with
the car keys
• Always switch over the system to the service mode when
handing the car over for maintenance or washing. Do not
hand tags and remote keys over to third parties to prevent
unauthorized access to security functions
• Do not leave remote key or tags in areas accessible to children
and animals
• Do not let liquids ingress the remote key
• If the remote key display shows an icon warning about remote
key battery discharge, take timely measures to replace the
battery.
• Store the spare battery in the car in the factory packing

4
 short user manual

Mandatory safety measures during use

of the engine starting function
It should be borne in mind that the car is a source of extra hazard.
Before security system operation, carefully study the measures for safe
use of the function of remote or automatic engine starting outlined
below:
1. Always park the car on an open, well ventilated area;
2. Always apply the car’s parking brake, which shall be operable and
prevent car movement;
3. Leaving the car, be sure to set the automatic transmission control
lever to the «PARK» position, and the manual gearbox changeover
lever – to the neutral position;
4. If your car has a manual gearbox, prior to activating the function of
remote or automatic engine starting, be sure to perform the procedure
of preparation for engine starting  – «program neutral»;
5. Never hand over the security system control remote key to children and
other persons without their preliminary study of the operation manual;
6. Before activating the function of remote or automatic engine
starting:
• make sure the car is operable;
• make sure there is a sufficient amount of fuel, oil, cooling fluid
etc;
• set the operation parameters of the passenger compartment
heater (air conditioner), window heating and other accessories
to the required levels;
• set the passenger control ventilation regulator to air circulation,
which will allow more efficient warming or cooling of air in the
car.

5
StarLine E96, E66

Safety precautions during charging of your car’s

storage battery
Remember that any battery charging process implies supply of voltage
exceeding the rated 12 V to the storage battery and accordingly to
the car circuit, which may damage the car electronic equipment and
additional installed equipment in your car.
Do not use charging and starting/charging devices for storage battery
charging directly on the car without disconnecting the storage
battery terminals from the car circuit in the following modes:
• rapid charging by increased current («boost» or similar
modes)
• various START modes intended for engine starting
• in the storage battery 24 V charging mode
Never use starting and charging devices for engine starting without
a connected storage battery and with connected inoperable storage
batteries (short circuits in banks, breakage of plates etc.)
Never use inoperable charging devices, 24 V charging devices and
devices not intended for storage battery charging, e.g., welding
invertors.
All the aforesaid devices and modes may cause uncontrolled supply
of increased voltage over 25 V and up to 60 V to the car circuit and
cause failure of the electronic components of the security system and
car equipment.
The light-up method should not be used for storage battery charging.
Even the described «safe» light-up methods are safe only for the
«donor» car. Connection and disconnection of a fully discharged or
inoperable storage battery on your car with the engine operating may
cause failure of the electronic devices of your car and the car alarm
due to a short circuit or surges of increased voltage occurring during
storage battery connection and disconnection.

6
 short user manual

If the aforesaid devices and modes are used, the car owner shall be
responsible for damage of the electronic equipment.

Observe the technology for safe storage battery charging!

Before charging, the storage battery terminals shall be disconnected

from the car circuit. After that the storage battery charging process
can be started. After charging, connect the storage battery to the car
circuit.
This is necessary because without measuring devices you cannot
determine storage battery operability or status and the reason of its
discharge (internal short circuits or breaks). Any connection of the
charging device to an inoperable storage battery causes the risk of
damage of the car electronic equipment and the security system by
increased voltage.

7
StarLine E96, E66

General description
Security telematic complexes StarLine Е96, StarLine Е66 (hereinafter
the complex) are intended for vehicle protection from theft and armed
assault.
The functions of automatic and remote engine starting are available
for the StarLine E96 complex.

Main advantages:
• operation in the «Slave» mode (security mode activation or
deactivation using the factory car remote key);
• driver identification by means of the wireless tag or smartphone via
the Bluetooth Smart protocol;
• connection of wireless underhood unit StarLine R6 for control of the
hood locks, horn and engine blocking;
• additional owner authorization by means of a wireless tag, smartphone
or entry of the secret code by means of the factory buttons;
• a dialogue code of StarLine control with individual 128 bit encryption
keys, guaranteeing reliable protection from all known code grabbers;
• the possibility to install the 2CAN+2LIN module for reception of
statuses and control via the CAN bus;
• remote and automatic engine starting (for StarLine E96);
• temporary deactivation of the standard immobilizer using the iKEY
technology (via the digital CAN and LIN buses) or Fortin and iDataLink
module control;
• determination of transport vehicle coordinates, speed and movement
direction;
• determination of driving parameters, driving style;
• monitoring of car parameters (mileage, error codes, mains voltage
etc);

8
 short user manual

• automatic data transmission to the monitoring server;

• data recording and storage in the non-volatile memory («black
box»). The event log contains information on tracks for the last 1000
kilometers at driving in the city and 5000 — on the highway and on
13000 events;
• control of functions and display of parameters on the monitoring
server and in the StarLine mobile application;
• high-sensitivity GLONASS+GPS module;
• the service button combined with the LED indicator of system
status;
• universal reconfigurable outputs/inputs;
• the special StarLine Master program, used for individual setting of
the complex depending on owner’s wishes and car’s peculiarities.

The plastic card

The delivery set includes a plastic card containing the following data:
• Login and password — the user’s personal account on the website
starline.online where security complex control and parameter
changing are available.

9
StarLine E96, E66

• Code of emergency security deactivation — the code is given

on the owner’s plastic card. It is used for emergency security
deactivation.
• Service code — the code is given on the owner’s plastic card. It is
used for entry in the StarLine Master application.
ATTENTION! Do not tell the code of emergency security
deactivation to anybody! Remember that a malefactor,
knowing the code, may deactivate the protective functions.

The tag

The presence of a tag depends on the set of the

complex
ATTENTION! The tags, which are included in
set, are initially in transport mode, in which
they are disabled! Pressing the tag button in
this mode will be indicated by the green and
red flashes of the built-in LED.
Before operating, it is necessary to press the tag
button several times before changing the color
of the flashes to green.
As the tag, you can use a smartphone that supports the
Bluetooth Smart protocol.
A smartphone and the tag equivalent to the functionality
when used for additional authorization of the owner in the
«Free Hands» mode and «Slave» mode.
Complex control
Duration of pressing the tag button:
• short — press and release the button, then a flash corresponding to
the current mode of operation will follow;

10
 short user manual

• long — hold the button until the LED flashes. The duration of
depression can be of two levels:
• 1 level — hold the button until a long flash of the LED
corresponding to the current mode of operation appears;
• 2 level — press and hold the tag button, followed by two
short flashes and one long one, and again a series of short
flashes — release the button.
Replacing the tag’s battery
If the tag’s battery is discharg, then when the ignition ON 3 sounds of
the buzzer will sound and an SMS will be sent to the owner number.
We recommend that you replace the battery as soon as possible.
To replace the battery with a neatly flat metal or plastic object (metal
ruler, thin plastic) open the tag body and, observing the polarity (as
pictured in the photo), install the battery in the compartment. Before
closing the tag body, install a waterproof seal between its parts. After
installing the battery in the tag, the complex is ready for operation.

11
StarLine E96, E66

Specifications

Parameter Value

Radio exchange protocol Bluetooth Smart

Remote key operating frequency 868,7 - 869,2 MHz
Remote key control range up to 1500 meters
Range of notification to the remote key up to 2000 meters
Interfaces • 2 CAN
• 2 LIN
• 1 universal code bus StarLine Bus
• 1 USB
• 18 reconfigurable channels:
• 17 outputs of OC (open collector) ОК
–0,2А
• 2 outputs 2А
• 3 positive inputs
• 3 negative inputs
• 1 universal input
• a connector for the engine temperature
sensor
• a connector for the valet button
Supply voltage 8-16 V
Operating temperature range from −40 to +85 °С
Overall dimensions of main unit 106х63х17 mm
Weight 63 g

12
 short user manual

Light and sound indication

The security complex informs about its status by means of sound (horn)
and light signals (turn signals)
— short signal
— long signal

Event Light signals Horn

Security activation
Security activation with
security zone breach
Security activation with
deactivation of «Hands
free»
Security activation with
deactivation of «Hands free»
mode with security zone
breach
Security deactivation
Security deactivation (one of
the zones was violated in the
security cycle)
Alarm 30 s 30 s
Warning level alarm
Panic 10 s 10 s
Exit from service mode

13
StarLine E96, E66

Complex control using the remote key

The complex (depending on the set) includes Remote key with LCD
display (liquid-crystal display):

The service life of the battery of the additional remote key is up to 1

year depending on operation conditions.

14
 short user manual

Value of remote key pictograms

Engine Starting

Operation modes

15
StarLine E96, E66

Security zones

Sensors

16
 short user manual

Additional information

Main control commands from the remote key

This manual users the following terms of duration of pressing on the
remote key buttons:

One pressing of the button (or two buttons at the same time)
with duration less than 1.5 second.
Short pressing Example: 1 — short pressing of the first button;
2 3 — short simultaneous pressing of buttons 2 and 3.
Pressing and holding of a button or two buttons until a
melodic sound signal and a vibration signal. Two levels of
long pressing are provided:
• Long pressing of the first level — long pressing of the
button until the first sound signal;
Examples: 1 — long pressing of the first button;
Long pressing 12 — long pressing of the first and second button;

• Long pressing of the second level — long pressing of the

button until the second sound signal;

Example: 4 — long pressing of the fourth button

of the second level.
Two pressings of one button within 1 second;
Double pressing
Example: 1 1 — double pressing of button 1.

17
StarLine E96, E66

Two pressings of one or different buttons. The first pressing

shall be long (of the first or second level), the second
pressing shall be short. The first button should be released
Successive pressing before the second pressing.
Example: 2 1 — successive pressing of buttons
2 and 1.

Main control commands from the remote key:

Command Combination of buttons

Activate security 1
Deactivate security 2
Request passenger compartment temperature, engine
temperature and storage battery voltage 3
Start the engine 1
Stop the engine 2
Switch on the pre-start engine heater 2 1
Switch off the pre-start engine heater 2 2
Car search on the parking lot 3
Switch on/off the shock sensor 12
Switch on/off the tilt and motion sensor 13
Activate the «Panic» mode 1 1
Unlock the trunk 2 2
Activate automatic starting Cursor menu
Activate/deactivate the service mode Cursor menu
Activate/deactivate the «Hands free» mode Cursor menu
Activate/deactivate button blocking 23
Activate the remote key vibration signal only 3 3
Activate the remote key sound and vibration signal 3 1

18
 short user manual

Cursor menu

Some functions of the security complex are controlled from the cursor
menu: control of the «Hands free» mode, service mode, setting of
automatic engine starting.
Entry and exit from the menu is performed by long holding of button
4 of the first level: 4 . If the remote key buttons are not pressed
for 15 seconds, automatic exit from the menu will be performed.
At entry in the menu, the cursor will be set to the first pictogram.
Transition to the next and previous menu item is performed by
short pressing of buttons 1 or 4 , accordingly. A function
is selected by short pressing of buttons 2 and 3: 2 3 .
Parameter value is changed by pressing buttons 2 or 3 (increase
accordingly). In case of long holding of the button, the rate of
parameter value change increases. Transition to menu items,
parameter change and exit from the menu will be confirmed by a
melodic sound signal.
The description and control of the settings are given in the table.
Pictogram Parameter Description Setting step
Activate/deactivate the
«Hands free» mode —
«Hands free» mode
Automatic starting Set hours and minutes
1 minute
by alarm clock of engine starting
Automatic starting Set engine starting
1 hour
by timer periodicity in hours
Automatic starting Set a temperature value
by temperature in degrees Celsius 1 ºС

Automatic starting Set the value of storage

0,1 V
by voltage battery voltage in Volts
Activate/deactivate
Service mode —
the service mode

The information on the additional remote key settings is available in

the electronic manual on the website help.starline.ru.

19
StarLine E96, E66

Operation modes

Security on
Security off
Security modes
Alarm
Panic
Slave
Hands free
Additional modes Service mode
Device registration mode
Telematic setting mode

The security modes protect the car against theft.

The additional modes are intended for setting of the complex
parameters (telematic setting mode), adding of new devices (device
registration mode), deactivation of protective functions for car
handover for maintenance (service mode) and convenient complex
control («Slave» mode, «Hands free» mode).

«Security on» mode

The following zones are monitored in the «Security on» mode:

ignition, doors, trunk, hood, shock sensor, tilt sensor, movement
sensor, additional sensor. If a zone is violated, the complex will set to
the «Alarm» mode.

Security activation is performed only with the ignition off.

20
 short user manual

If a security activation command is sent with the ignition on, only

closing of the central lock will be performed.
Security activation is performed by one of the following methods:
•  short pressing on remote key button 1 ;
•  by activation of standard system security in the «Slave» mode;
•  in case of tag loss or touch of the door handle sensor in the «Hands
free» mode;
•  by single pressing on the tag button in the «Security off» or «Alarm»
mode.
The complex will confirm successful security activation by one sound
signal and one flash of light emergency alarm.
If the doors, hood, trunk are not properly closed, the parking
brake is not tightened, the brake pedal is pressed or one of
the limit switches of the doors, hood, trunk is faulty
(constantly closed), the complex will warn thereof by 4 sound
signals and 4 flashes of light signals.
Restore the violated security zone and check presence of a
single confirmation signal on switchover to the security mode

«Security off» mode

Security deactivation is performed by one of the following methods:
•  deactivation of standard system security («Slave» mode);
•  in case of tag detection or touch of the door handle sensor
(«Hands free» mode);
•  by single pressing on the tag button in the «Security on» mode.
Successful security deactivation will be confirmed by 2 sound signals
and 2 light signals. If the «Alarm» mode was activated during security,
3 sound signals and 3 flashes of light signals will follow.
After complex security deactivation, the remote key screen will display
all the events which occurred during the security.
After security deactivation, if no actions are taken, the
complex will automatically set to the «Security on» mode
and close the central lock in 30 seconds.

21
StarLine E96, E66

«Alarm» mode
The «Alarm» mode is activated at violation of any zone in the «Security
on» mode. The complex will switch on sound alerting by the horn and
light emergency alarm for 30 seconds and will notify the owner to remote
key. If the zone is not restored, the complex will repeat the alarm cycle
once more.
If a warning zone is violated, 3 light signals and 3 long horn signals
will follow.
The «Alarm» mode is reset without security deactivation by a short
pressing on remote key button 1 or 2 .

ATTENTION! The maximum number of zone actuations is

limited to 8 repetitions per 1 security cycle.

«Panic» mode
The «Panic» mode is intended to ensure safety of the owner and car.
This mode is activated by owner’s command by a double pressing
on remote key button 1 1 or SMS-command 19. Upon command
reception the complex activates sound alerting by the horn and
emergency light alarm for 10 seconds to attract the attention of nearby
persons.

«Slave» mode

The «Slave» mode allows for complex control by means of the standard
alarm remote key.
In this mode, additional owner authorization by presence of the tag or
LCD remote key is used. At deactivation of standard alarm security, the
complex checks presence of the tag in the identification zone. If the
tag is found, car security is deactivated.
If the tag (remote key) is not found within 10 seconds, the complex will
set to the «Alarm» mode.

22
 short user manual

«Hands free» mode

Use the wireless tag (depends on the set of the complex) or

smartphone for the «Hands free» mode
The «Hands free» mode is intended for automatic control of security
activation/deactivation according to tag presence.
When the tag is present near the car, security deactivation is
performed automatically. When the tag disappears from the visibility
zone, the complex sets to the «Security on» mode.
The «Hands free» mode can be activated or deactivated by means of
the remote key (cursor menu).

Service mode
The service mode is intended for temporary deactivation of security
functions and prohibition of access to complex settings. It is
recommended for the maintenance period.

The service mode can be activated only from the «Security

off» mode near the car.

Switchover to the service mode is performed by one of the following

methods:
•  in the remote key’s cursor menu by selecting the
corresponding item;
•  holding of the tag button for 5 seconds.
Switchover to the service mode will be confirmed by yellow indication
of the tag LED.

ATTENTION! In the service mode, transition to the other

additional modes is prohibited!
Exit from the service mode is performed by one of the following
methods:

23
StarLine E96, E66

•  in the remote key’s cursor menu by selecting the corresponding

item;
•  holding of the tag button for 5 seconds.

«Drive prohibition» function

Use of the «Drive prohibition» function prohibits driving without
additional owner identification.
Additional authorization is performed by entering the code of owner
authorization using the standard car buttons (for instance, the
multimedia control buttons on the steering wheel, window raiser
control buttons) at each security deactivation. The code is entered
with the ignition switched-off.
If the owner authorization code is not entered, then if an attempt at
driving is made, the engine will be blocked for 1 minute or until entry
of the owner authorization code

«Engine starting» function (only for StarLine E96)

The starting function allows for remote and automatic car engine
starting/stopping.
Preparation of a car with manual transmission for remote and
automatic engine starting.
Before engine starting, perform the procedure «program neutral»:
•  apply the parking brake with the engine operating. The LED on
the service button will light up;
•  take the key out of the ignition lock. The engine will continue
operating;
•  leave the car, close the doors, trunk, hood and send the “Security
activation” command. The engine will be stopped;
•  the complex will set to the security mode;
•  the «N» pictogram will appear on the remote key;
•  the complex is ready for remote and automatic engine starting.

24
 short user manual

If the door is opened or ignition is switched on after fulfillment

of the «program neutral», remote and automatic engine
starting will be canceled until the next execution of the
«program neutral» algorithm.

Preparation of a car with automatic transmission for remote and

automatic engine starting
Make sure the automatic transmission selector is in the «Parking»
position.

Engine starting

Remote engine starting is performed by long pressing on remote

key button 1 1
Automatic engine starting can be performed according to one of
the conditions:
•  according to temperature value. Engine starting at engine
temperature decrease below the specified value.
The temperature value is set in the cursor menu on the remote
key;
•  according to value of storage battery voltage. Engine starting at
storage battery voltage decrease.
The voltage value is set in the cursor menu on the remote key;
•  periodic. Engine starting with the preset operation period after the
preset recurrent time interval.
The interval and period are set in the cursor menu on the remote
key;
•  by alarm clock. Engine starting at the preset time.
Engine starting schedules are set in the cursor menu on the
remote key.

25
StarLine E96, E66

The minimum time of engine operation at remote starting is 10

minutes. It can be changed in the personal account on the
website starline.online or in the StarLine mobile application.
ATTENTION! Automatic engine starting will not take place
if less than 1 hour has passed after the last start or the
previous automatic start has failed.
Upon drive completion, automatic engine starting is
possible not earlier than 5 minutes after engine stopping.

Engine stopping
The engine is stopped if:
•  remote key button 2 is pressed for a long time 2 ;
•  the “Alarm” mode is activated;
•  the car has started moving;
•  the hood is open;
•  the parking brake is off (for cars with manual transmission);
•  the automatic transmission selector was switched over from
the «Parking» position (for cars with automatic transmission);
•  the brake pedal is pressed.

Car driving continuation after remote engine starting

To continue driving the car, without stopping the engine after remote
starting, do as follows:
•  for cars with ignition lock:
•  deactivate complex security;
•  insert the key into the ignition lock, turn it to position «Ignition
on» and start moving;
•  the LED on the service button will go out at movement start,
pressing of the brake pedal or parking brake release;
•  for cars with START/STOP button:
Several options are possible depending on the car and complex

26
 short user manual

connection method:
•  first variant (*):
•  deactivate complex security;
•  hold the brake pedal for 3 seconds;
•  the LED on the service button will go out, after which
movement can be started (the START/STOP button need not
be pressed);
•  second variant (*):
•  deactivate complex security;
•  press the START/STOP button 1 or 2 times (*);
•  the LED on the service button will go out, after which
movement can be started.
(*) Ask the installation specialist during mounting about the
connection method of your complex and the operation
algorithm.

Function «Engine starting preheater»

The function allows for engine preheating before starting. The starting
preheater can be controlled both in the manual and automatic mode.
Manual mode
In the manual mode the starting preheater is switched on/off by a
command.
The starting preheater can be switched on by successive pressing of
remote key buttons 2 1.
Time of preheater operation in this mode is 20 minutes.

ATTENTION! If the starting preheater has normal settings,

differing from those set in the personal account, operation
time may differ from the specified one.
Operation can be prolonged by sending a repeated command for
starting preheater switch-on.

27
StarLine E96, E66

The starting preheater can be switched off by successive pressing of

remote key buttons 2 2.
Automatic mode
The automatic mode is activated by the installation specialist
during complex setting after mounting.

In the automatic mode the starting preheater is switched on before

operation of engine remote and/or automatic starting. If engine
temperature before remote or automatic starting is less than specified,
the starting preheater will be started. The engine will be started after
engine warm-up to the preset temperature (during automatic starting)
or upon expiry of the preset time.
The starting preheater is switched off upon expiry of the specified time
or reaching of the switch-off temperature threshold.
Time of preheater operation in this mode is 10 minutes. Operation can
be prolonged by manual sending of a repeated command for starting
preheater switch-on.
Operation time and switch-off temperature threshold of the starting
preheater can be changed in the personal account on the website
starline.online or in the StarLine mobile application.

Function «Turbotimer»

Use the function «Turbotimer» for turbocharged cars for engine

turbine cooling.

The «Turbotimer» function is activated by a installer during

installation.
Activate the function as follows:
•  apply the parking brake with the engine operating. The LED on
the valet button will light up;
•  take the key out of the ignition lock. The engine will continue
operating;

28
 short user manual

•  leave the car, close the doors, trunk, hood and activate the
“Security on” mode;
•  the engine will be stopped when the turbine cools down.
Turbine cooldown time is calculated automatically and depends
on engine speed before the drive end.
The maximum turbine cooldown time is 5 minutes.

Change settings
Change of user settings is available in the personal account on the
website starline.online

29
StarLine E96, E66

Registration of remote keys, tags and

smartphones
Use the «Device registration» mode for registration of new remote
keys, tags and smartphones.
To prevent unauthorized adding of new components, entry in
the device registration mode is possible only from the «Security
off» mode.
ATTENTION! Tags and smartphones shall be registered in one
cycle. At registration of new tags and smartphones all previous
tags and smartphones will be deleted from memory. It will be
necessary to register them again. In total, up to 5 devices can be
registered in the complex.
ATTENTION! When new remote keys are registered, all
previous remote keys will be deleted from the memory. It will be
necessary to register them again. In total, up to 4 remote keys
can be registered in the complex.

Entry in the device registration mode

1) Deactivate complex security.

2) Switch off ignition (if it is on).

3) Press the service button 7 times.

30
 short user manual

4) Switch on the ignition. 7 light signals on the

service button will follow.

5) Entry in the registration mode will be

confirmed by 2 short LED signals.

Remote key registration

1) Press the remote key buttons 1 and 2 shortly.

2) In 3 seconds, successful registration will be

confirmed by a short sound signal of the remote
key and 2 LED signals. If the remote key was not
registered, 4 sound signals of the remote key
will follow.
3) Perform items 1 and 2 for each remote key.

31
StarLine E96, E66

Tag registration
1) Remove the battery from the tag.

2) Press and hold the tag button and install the

battery. The tag LED will light up red.

3) Release the button and check presence of a

series of red flashes for 10 seconds.

4) Successful registration will be confirmed by a

green flash and 2 LED signals. If the tag was not
registered, the LED will light up red.

5) Repeat items 1-3 for the remaining tags.

32
 short user manual

Smartphone registration
Register the smartphone using the StarLine
mobile application (see the application menu
«Smartphone as a tag»).

Exit from the device registration mode

Exit from the device registration mode is
performed automatically in 5 minutes or at
ignition switch-off.

Exit from the “Device registration” mode will be confirmed by 2 LED

signals and by signals the number whereof corresponds to the total
number of registered remote keys, tags and smartphones.

After registration, an SMS message with the list of registered devices

will be sent to the owner’s telephone.

33
StarLine E96, E66

Emergency security deactivation

If the tag was lost, the tag or remote key battery has discharged, there
is no access to the mobile application or the «Anti hijack» mode is on,
use the code of emergency security deactivation given on the plastic
card.

Do the following to deactivate complex security:

1) Switch on the ignition. The «Alarm» mode is
activated.

2) Press the service button the number of times

corresponding to the first digit of the code of
emergency security deactivation.

34
 short user manual

3) Switch on ignition or wait for 5 seconds. The

LED on the service button will light up, the
number of flashes will correspond to the ordinal
number of the digit of the code of emergency
security deactivation (1,2, 3 or 4 times).

4) Switch on the ignition.

5) Repeat items 2-4 for the remaining code digits.

If the code of emergency security deactivation is entered correctly,

3 short sound signals of the horn and 3 flashes of light signals will
follow. The complex will set to the «Security off» mode.
If the code of emergency security deactivation is entered
incorrectly 3 times, the possibility of repeated code entry
will be blocked for 15 minutes and an SMS-notification will
be sent to the owner’s telephone.
An attempt at digit entry will be indicated by 5 LED flashes.

35
StarLine E96, E66

Example of entry of code 5342

36
 short user manual

Change of owner authorization code

The owner code is used for user authorization by means of the

standard car buttons.
Do as follows to change the owner authorization code:

1) Deactivate complex security.

2) Switch off ignition (if it is on).

3) Press the service button 7 times.

4) Switch on the ignition. 7 light signals of the LED

on the service button will follow. Entry in the
registration mode will be confirmed by 2 short
signals of the LED on the service button.
5) Enter a new owner authorization code using
the standard car buttons with pressing interval
not more than 3 seconds. Each pressing of the
standard button will be accompanied with a
single light signal on the service button.

37
StarLine E96, E66

The owner authorization code consists of a code sequence,

containing from 5 to 30 pressings of the standard buttons.
The list of standard buttons supported by the car is given on
the website can.starline.ru
If a light signal does not follow after pressing of a standard
button, the button is not supported in the given car.
6) In 3 seconds after owner’s code entry, 2 short
signals of the LED on the service button will
follow, confirming code acceptance.

7) Enter the owner authorization code again.

8) If the code is entered correctly, 2 short signals

of the LED on the service button will follow. If
the code is entered incorrectly, 4 short light
LED signals will follow, in this case repeat items
7 and 8.

9) In 10 seconds switch off ignition to exit the

registration mode.

10) Exit from the registration mode will be

confirmed by 2 light signals of the LED
on the service button and by signals the
number whereof corresponds to the total
number of registered remote keys, tags and
smartphones.

38
 short user manual

Owner authorization code

39
StarLine E96, E66

Manufacturer holds the right for the design changes and technical improvements without
preliminary notice.
Manufacturer
ScPA “StarLine” LLC

Komissara Smirnova str., 9, 194044, Saint-Petersburg, Russia Federation

Tel. +7 812 3263333
www.alarmstarline.com

40