1.

1 Solenoid-Driven Metering Pumps

1.1.3 Solenoid-Driven Metering Pump gamma/ X

gamma/ X – the proven best-seller intelligently extended

Feed rate of product range 1 ml/h – 45 l/h; 25 – 2 bar

9 The solenoid-driven diaphragm metering pump gamma incorporates a wealth of eXcellent ingenuity! With
integrated pressure measurement, it ensures the smooth running of your metering process. The gamma/ X
is ideal for all metering work involving liquid media.

The new solenoid-driven diaphragm metering pump gamma/ X is user-friendly and has an outstandingly
long service life, just like its predecessor. An ingenious solenoid control measures the back pressure and
protects the system from overload. This technology makes a pressure sensor superfluous, meaning that
operating safety can be significantly increased: no additional parts come into contact with the feed chemi-
cal, there are no additional sealing surfaces and no electronic components come into contact with the feed
chemical. Whether the metering volume fluctuates or hydraulic failures affect the metering process – the
gamma/ X keeps everything at your fingertips.

It independently ensures a trouble-free metering process and should the pump ever need maintenance its
service module draws attention to this.

Your benefits

■ Simple adjustment of the metering rate directly in l/h

■ Direct input of the required final concentration in concentration mode with volume-proportional metering
tasks
■ Integrated pressure measurement and display for greater safety during commissioning and in the pro-
cess
■ Control range for metering rate 1:40,000
■ Virtually wear-free solenoid drive, overload-proof and economical
■ Suitable for continuous micro-metering from approx. 1 ml/h, thanks to the regulated solenoid drive
■ Detection of hydraulic malfunctions, such as gas in the dosing head, and no or too high back pressure,
ensures smooth processes
■ Bluetooth interface for simple parameter configuration and access to diagnostic data using the Android
and IOS app - DULCONNEX Blue (optional)
■ Adaptation to existing signal transducers by external control via potential-free contacts with pulse step-
up and step-down
■ External control via 0/4-20 mA standard signal with adjustable assignment of signal value to stroke rate
(optional)
■ Integrated 1-month timer for timed metering tasks
■ Guaranteed metering by means of automatic bleeding
■ Connection to process control systems via Bus interface, such as PROFIBUS®, PROFINET, CANopen,
Modbus

Technical Details Low-pressure metering technology

■ Illuminated LCD and 3-LED display for operating, warning and error messages, visible from all sides.
■ Factor with external contact control 99:1 - 1:99.
■ Batch operation with max. 99,999 strokes/start pulse.
■ Stroke rate adjustment in 1 stroke/h increments from 1 – 12,000 strokes/h.
■ In non-automatic mode, stroke rate setting 1 stroke/h – 12,000 strokes/h, stroke length electronically
continuously variable 0 – 100%, recommended 30 – 100%
In automatic mode, an even finer setting in ml.
■ Connector for 2-stage level switch.
■ Available material combinations: PP, PVDF, clear acrylic, PTFE and stainless steel.
■ Special dosing head designs for outgassing and higher-viscosity media.
■ Degree of protection IP 66 and/or NEMA 4X indoor.
■ Optional 0/4 – 20 mA output for remote transmission of actual dosing rate and error messages.
■ Universal power supply unit 100 - 230 V, 50/60 Hz.
■ Optional 230 V relay module, can be retrofitted easily and securely.
■ Optional 24 V combined relay, can be retrofitted easily and securely.

Field of application

■ Can be integrated into automated processes and used in all industries.

■ The pump can work as a control unit with the timer, for example in cooling water treatment.

01.06.2021 Product Catalogue Volume 1 25

 1.1 Solenoid-Driven Metering Pumps

Dimensional drawing of gamma/ X, material version PPT

Typ ØA B
1602, 1604 70 71
0708, 1009 90 74
0414, 0715 90 74
0220, 0424 90 76

Typ C D E
1602, 1604 106 32 198
0708, 1009 108 24 202
0414, 0715 107 24 202
0220, 0424 110 24 202

Dimensional drawing of gamma/ X, Material design PPT – dimensions in mm

Dimensional drawing of gamma/ X, material version NPT

Typ ØA B
1602 - 2504 70 77
0708, 1009 90 74
0414 - 0424 90 76

Typ C D E
1602 - 2504 105 33 191
0708, 1009 102 23 200
0414 - 0424 104 23 200

Dimensional drawing of gamma/ X, Material design NPT – dimensions in mm

Dimensional drawing of gamma/ X, material version PVT

Typ ØA B
Low-pressure metering technology

1602, 1604 70 71
0708, 1009 90 75
0414, 0715 90 73
0220, 0424 90 79

Typ C D E
1602, 1604 84 36 196
0708, 1009 92 25 203
0414, 0715 90 25 203
0220, 0424 90 25 203

Dimensional drawing of gamma/ X, Material design PVT – dimensions in mm

26 Product Catalogue Volume 1 01.06.2021

1.1 Solenoid-Driven Metering Pumps

Technical Data
Pump type Pump capacity at max. back pressure Stroke rate Connector Suction lift* Shipping weight
size
outside Ø x
inside Ø
PP, NP, PV, SS
TT
bar l/h ml/stroke Strokes/min mm m WC kg kg
Metering pumps with non-self-bleeding dosing head
GMXa 1602 16 2.3 0.19 200 6 x 4 6.0 3.6 4.1
GMXa 1604 16 3.6 0.30 200 6 x 4 5.0 3.6 4.1
GMXa 0708 7 7.6 0.63 200 8 x 5 4.0 3.7 5.0
GMXa 0414 4 13.5 1.13 200 8 x 5 3.0 3.7 5.0
GMXa 0220 2 19.7 1.64 200 12 x 9 2.0 3.7 5.0
GMXa 2504 25 3.8 0.32 200 8 x 4 4.0 4.9 5.5
GMXa 1009 10 9.0 0.75 200 8 x 5 3.0 5.1 6.5
GMXa 0715 7 14.5 1.21 200 8 x 5 3.0 5.1 6.5
GMXa 0424 4 24.0 2.00 200 12 x 9 3.0 5.1 6.5
GMXa 0245 2 45.0 3.70 200 12 x 9 2.0 5.2 7.0
Metering pumps with self-bleeding dosing head
GMXa 1602 10 1.5 0.08 200 6 x 4 1.8 3.6 -
GMXa 1604 10 2.2 0.13 200 6 x 4 1.8 3.6 -
GMXa 0708 7 5.6 0.48 200 8 x 5 1.8 3.7 -
GMXa 1009 10 6.6 0.50 200 8 x 5 1.8 5.1 -
GMXa 0414 4 12.2 1.00 200 8 x 5 1.8 3.7 -
GMXa 0715 7 13.0 1.08 200 8 x 5 1.8 5.1 -
GMXa 0220 2 18.0 1.45 200 12 x 9 1.8 3.7 -
GMXa 0424 4 22.0 1.60 200 12 x 9 1.8 5.1 -

* Suction lift with a filled dosing head and filled suction line, with a self-bleeding dosing head with air in the suction line.

! gamma/ X metering pumps with dosing heads for higher-viscosity media have a 10 – 20 % lower capacity
and are not self-priming with all feed chemicals. G 3/4-DN 10 connector with d 16-DN 10 hose nozzle.

All data calculated with water at 20 °C.

Materials in Contact With the Medium

Identity Dosing head Suction/discharge Ball seat Seals Balls
code of connection
material
PPT Polypropylene PVDF PVDF PTFE Ceramic
NPT Clear acrylic PVDF PVDF PTFE Ceramic
PVT PVDF PVDF PVDF PTFE Ceramic
TTT Carbon-filled PTFE Carbon-filled PTFE Ceramic PTFE Ceramic
SST Stainless steel 1.4404 Stainless steel 1.4404 Ceramic PTFE Ceramic
Low-pressure metering technology
Metering reproducibility: ±2% when used according to the instructions in the operating instructions
Permissible ambient temperature: -10 °C to +45 °C
Mean power consumption: 25/30 W

Degree of protection: IP 66, NEMA 4X, insulation class F

9 Scope of supply
Metering pump with mains cable, connector kit for hose/tube connector as per table.

01.06.2021 Product Catalogue Volume 1 27

 1.1 Solenoid-Driven Metering Pumps

Identity code ordering system for gamma/ X product range

GMXa Type Output
1602 16 bar 2.3 l/h
1604 16 bar 3.6 l/h
0708 7 bar 7.6 l/h
0414 4 bar 13.5 l/h
0220 2 bar 19.7 l/h
2504 25 bar 3.8 l/h
1009 10 bar 9.0 l/h
0715 7 bar 14.5 l/h
0424 4 bar 24.0 l/h
0245 2 bar 45.0 l/h
Liquid end/valve material
PP Polypropylene/PVDF
NP Clear acrylic/PVDF
PV PVDF/PVDF
TT PTFE
SS Stainless steel 1.4404/1.4404
Material of seals/diaphragm
T PTFE/PFTE coated
F FDA-compliant design, Only for PV and SS
M With vPTFE diaphragm + PTFE valve seats. Design for PV heads only
Liquid end version
0 Non-bleed, without valve spring, only with NP, TT and SS and type 0245
1 Non-bleed, with valve spring, only with NP, TT and SS and type 0245
2 with bleed valve, without valve spring, only with PP, PV, NP not for type 0245
3 Bleed version, with valve spring, only with PP, PV, NP not for type 0245
4 Design for higher-viscosity media (10-20 % lower metering rate possible), only with PV, types 1604, 0708, 0414,
1009, 0715, 0424
7 self-bleeding without bypass, only for NPT and PVT. With type 0245 without vent screw.
Hydraulic connections
0 Standard according to technical data
5 Connector on discharge side for 12/6 hose, standard on suction side, Only with materials PP, NP and
PV
9 Discharge side connection for hose 10/4, suction side standard , Only with materials PP, NP and PV
Diaphragm Rupture Indicator
0 without diaphragm rupture indicator
1 With diaphragm rupture indicator, not for type 0245
Version
0 standard
logo
0 with ProMinent logo
Electrical Connection
U 100-230 V, ±10%, 50/60 Hz
Cable and plug
A 2 m European
B 2 m Swiss
C 2 m Australian
D 2 m USA
E 2 m Great Britain
1 2 m, open-ended
Low-pressure metering technology

Relay, pre-set to
0 no relay
1 Fault indicating relay (230 V, 8 A)
4 Fault indicating relay (24 V, 100 mA) + pacing relay (24 V, 100 mA)
C 0/4 – 20 mA analogue output + fault indicating / pacing relay (24
V - 100 mA)
F with automatic bleed valve 230 V AC, not for pump type 0245
G with automatic bleed valve 24 V DC and relay output, not for pump
type 0245
Accessories
0 no accessories
1 with foot and metering valve, 2 m PVC suction line, 5 m PE
metering line, Only for PP, PV, and NP, not for PVT4
5 1+ universal control cable
Control Variants
0 Manual + external with pulse control
3 Manual + external with pulse control + analogue
(0/4-20 mA)
C * As 3 + CANopen
D * As 3 + CAN open DULCOMARIN® II
E * As 3 + Profinet
R * As 3 + PROFIBUS® DP interface M12
M * As 3 + Modbus
Metering monitor

* A relay cannot be used with these options.

28 Product Catalogue Volume 1 01.06.2021

1.1 Solenoid-Driven Metering Pumps

0 Pulse signal input

Remote stop
0 without Bluetooth
B with Bluetooth
Language
DE German
EN English
FR French
ES Spanish

* A relay cannot be used with these options.

Low-pressure metering technology

01.06.2021 Product Catalogue Volume 1 29