Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    Wall Design

    Uploaded by

    Ledgis Nahsin
    The document provides material properties, dimensions, and reinforcement details for a liquid storage tank. The tank has a length of 7.2m, width of 8m, and height of 1.8m. Calculations show the required thickness of the vertical walls is adequate at both the bottom and top. Maximum bending moments and shear forces were also calculated to design the vertical and horizontal reinforcement in the walls and base slab.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Wall Design

    Uploaded by

    Ledgis Nahsin
    19 views4 pages
    The document provides material properties, dimensions, and reinforcement details for a liquid storage tank. The tank has a length of 7.2m, width of 8m, and height of 1.8m. Calculations show the required thickness of the vertical walls is adequate at both the bottom and top. Maximum bending moments and shear forces were also calculated to design the vertical and horizontal reinforcement in the walls and base slab.

    Original Title

    wall design

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides material properties, dimensions, and reinforcement details for a liquid storage tank. The tank has a length of 7.2m, width of 8m, and height of 1.8m. Calculations show the required thickness of the vertical walls is adequate at both the bottom and top. Maximum bending moments and shear forces were also calculated to design the vertical and horizontal reinforcement in the walls and base slab.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    19 views4 pages

    Wall Design

    Uploaded by

    Ledgis Nahsin
    The document provides material properties, dimensions, and reinforcement details for a liquid storage tank. The tank has a length of 7.2m, width of 8m, and height of 1.8m. Calculations show the required thickness of the vertical walls is adequate at both the bottom and top. Maximum bending moments and shear forces were also calculated to design the vertical and horizontal reinforcement in the walls and base slab.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 4

    Material Properties

    Fcu 25 N/mm2
    Fy 415 N/mm2
    w(con) 24 KN/mm3
    Density of liquid 10 KN/mm3
    Permissible Direct tension 1300 KN/mm2 see page 701, A.K, jain
    Permissible Bending tension 1800 KN/mm2 1.7 Mpa
    Tank Dimensions
    Length 7.2 m
    Width 8 m
    Height 1.8 m
    Free Board 0.2 m
    Tank Capacity 92.16 m3(kilo litre)
    Top Thickness of Vertical wall 200 mm
    Bot. Thickness of Vertical wall 200 mm
    Centre to centre dimension 7.4 m

    Moments(See page 714, A.K. Jain)

    L/H 4.625
    Max. BM in vertical direction at bottom of wall 5.16096 KNm
    BM at mid height of wall 0.2048 KNm
    Max. BM in horizontal direction at ends of wall 3.35872 KNm
    BM at mid height of wall 2.2528 KNm

    Thickness of wall required at bottom 134.9635 mm thickness is ok


    Thickness of wall required at top 108.8775 mm thickness is ok

    Shear force

    Max. shear force @ midpoint of bottom edge of wall 11.52 KN/m ok


    Max. shear force @ midpoint/top of vertical edge of wall 10.3936 KN/m ok

    Vertical reinforcement in wall


    1) Base of wall
    Permissible stress in concrete in bending compression 9 Mpa
    Permissible stress in steel on liquid retaining face 150 Mpa
    modular ratio 10.37037
    N 0.383562
    j 0.872146
    Ast 239.0925 mm2/m
    Provide T 10 @ 328.4913 mm c/c
    Vertical reinforcement in wall
    Length of wall 7.2 m
    D 250 mm
    d 215 mm
    Ast 642.916666666667 mm2/m
    Min. steel(0.24%) 600 mm2/m
    Provide T 12 @ 175.9129 mm c/c

    Horizontal reinforcement in wall

    1) Near top of wall at corner


    Ld 600 mm

    Ast 625 mm2/m


    Min steel 516 mm2/m
    Provide T 10 @ 125.6637 mm c/c

    2) Base Slab
    M 5.16096 KNm/m
    T 11.52 KN/m
    e 448 mm

    Ast 211.280250783699 mm2/m


    Provide T 10 @ 371.7329 mm c/c
    38.4
    l b H
    8 8 1.8 115.2
    11 5.5 1.8 108.9

    You might also like