SR175 SKID STEER LOADER

TIER 4 FINAL CERTIFIED

LIFT GEOMETRY back-up and horn; Rearview mirror; Headliner;

Dome Light; Top window; Cup holder; 12V Power
Radial Lift plug socket; Foot rest; Seat pocket; Padded seat
bar w/ integral armrests; Loader control lockout
DRIVETRAIN system; Electric parking brake control; Operator’s
compartment floor cleanout; Proportional
Drive pump controls Direct mechanical auxiliary hydraulic control – on joystick; Advanced
Pump to engine ratio 1:1 Instrument Cluster w/ digital hour meter,
Displacement 2.14 in3 (35 cm3) tachometer, fuel level LCD bar graph w/ alarm,
Flow @ rated engine RPM: diagnostic features and security lockout.
@ 97% efficiency 25.1 gpm (95 L/min) Warning lights with alarms:
Charge pressure 360 psi (24.5 bar) Engine coolant temperature; Engine oil pressure;
System relief pressure 5,000 psi (345 bar) Engine malfunction; Hydraulic charge pressure;
Hydraulic filter restriction; Hydraulic oil
Drive pump controls Electro-hydraulic
ENGINE temperature: Critical system stop, Engine
Pump to engine ratio 1:1
system, Hydraulic system, Electrical and
Model ISM N844LTA-DI-F-50 Displacement 2.14 in3 (35 cm3) diagnostic system.
Flow @ rated engine RPM:
Emissions Certification Tier 4 Final Warning alarms:
@ 97% efficiency 25.1 gpm (95 L/min)
Type Diesel 4-stroke, Turbo. D.I. Battery voltage – plus display; Oil service.
Charge pressure 362 psi (24.5 bar)
Cylinders 4 System relief pressure 5,220 psi (360 bar) Indicator light:
Engine preheat; Parking brake;
Bore/Stroke 3.31 x 3.94 in Drive motors:
Seat bar reminder.
(84 x 100 mm) Max. displacement 19.8 in3 (325 cm3)
Displacement – optional:
Displacement 135.2 in3 (2.2 L)
High speed 12.2 in3 (200 cm3) OPERATING WEIGHT
Fuel injection Direct, high pressure Motor RPM @ high idle and 97% efficiency:
common rail – HPCR Unit equipped w/ open cab; 165 lb operator;
Standard 1-speed 313
66 in Dirt & Foundry bucket; full of fuel;
Fuel #2 Diesel Optional 2-speed 443
10 x 16.5 tires: 6,270 lb (2 842 kg)
Fuel filter: Motor torque @ max. displacement and relief
pressure, calculated @ 5,000 psi (345 bar): Shipping weight 5,970 lb (2 705 kg)
Pre-filter Beta (30) = 200/spin-on
Main filter Beta (4) = 20/spin-on 1,315 lb·ft (1 783 N·m) Add-on weights:
Travel speed: Side cab glass 47 lb (21.3 kg)
Air intake Turbocharged w/ waste gate
Low range 7.4 mph (11.9 kph) Polycarbonate cab door 74 lb (33.6 kg)
and intercooled w/ external EGR
High range – optional 10.8 mph (17.4 kph) Glass cab door w/ wiper 134 lb (60.8 kg)
Exhaust aftertreatment Diesel Oxidation Suspension seat 22 lb (10.0 kg)
Catalyst – DOC Final drive Single-reduction chain drive
Additional counterweight 140 lb (63.5 kg)
Cooling Liquid Drive chain:
Size ASA #80
Engine speeds RPM Tensile strength 21,000 lb (93.4 kN) HYDRAULICS
High idle – no load 2825 +/- 25
Rated – full load 2800 Axles: Implement pump type Gear
Low idle 1200 +/- 50 Torque @ max. displacement and
Displacement:
relief pressure 4,381 lb·ft (5 940 N·m)
Horsepower @ 2800 RPM – SAE J1349: Standard aux. 1.7 in3 (27.8 cm3)
Diameter 2.0 in (50.8 mm)
Gross 67 hp (50.0 kW) High-flow aux. 0.84 in3 (13.8 cm3)
Length 15.1 in (384.0 mm)
Net 64 hp (47.7 kW) Standard flow @ rated engine RPM:
Parking brake:
Peak torque @ 1800 RPM 153 lb·ft (208 N·m) @ 100% efficiency 20.6 gpm (78.0 L/min)
Type Spring-applied, hydraulic
Radiator: release multiple disc. Optional high-flow @ rated engine RPM:
Core type All aluminum Engagement Depress on/off brake button @ 100% efficiency 30.7 gpm (116.2 L/min)
Core size area 2.05 ft2 (0.191 m2) on handle or instrument panel, Loader control valve:
Rows of tubes x columns 31 x 4 raise seat bar, get off seat or stop engine. Type 3 spool/open center/series - series
Cap pressure 16 +/- 2 psi Relief pressure 3,050 psi (210 bar)
(1.10 +/- 0.14 bar)
ELECTRICAL Port relief pressures:
Fan: Loader raise 3,263 psi (225 bar)
Diameter 17.7 in (450 mm) Alternator 120 amp Bucket curl 3,770 psi (260 bar)
Ratio 0.89:1 Starter 2.68 hp (2.0 kW) Bucket dump 1,160 psi (80 bar)
Water pump: Battery 12-volt low-maintenance Hydraulic lines:
Style Centrifugal 925 cold-cranking amps @ 0° F (-18° C°) Tubing 37° JIC Flare
Flow 14.7 gpm (55.5 L/min) Loop hoses SAE 100 R19
Engine lubrication pump Pressure feed Hydraulic oil cooler:
OPERATOR ENVIRONMENT
w/ Trichoid pump Number of fins 10 per inch (3.94 per cm)
Pump operating angle ratings: ROPS/FOPS Level 1 canopy w/ side screens; Number of tube rows x columns 9x1
Side to side 35° Keyed start ignition; Tilt ROPS/FOPS; Rear Area 130.7 in2 (843.2 cm2)
Bucket up 35° window w/ emergency escape; Suspension Seat,
Hydraulic filter Beta (4) = 75/spin-on
vinyl w/ 2 in (51 mm) retractable 3 point lap seat
Bucket Down 35°
belt; Hand and foot throttle; Alarm package –
1 of 4
 HYDRAULICS CONT. SERVICE CAPACITIES PERFORMANCE SPECS
Lift cylinders: Fuel tank 19.5 gal (73.8 L) Rated operating capacity – ROC*:
Bore diameter 2.25 in (57.2 mm) Engine oil w/ filter 7.5 qt (7.1 L) 50% of tipping load 1,750 lb (790 kg)
Rod diameter 1.50 in (38.1 mm) w/ additional counterweight 1,850 lb (839 kg)
Hydraulic system:
Stroke 31.69 in (804.9 mm) Tipping load* 3,500 lb (1 588 kg)
Reservoir 5.0 gal (18.9 L)
Closed length 45.59 in (1 158 mm) Total 8.5 gal (32.2 L) Breakout forces @ 3,150 psi (217 bar)*:
Bucket cylinders: Chain tanks – per side 1.95 gal (7.4 L) Bucket cylinders 7,270 lb (32.3 kN)
Bore diameter 2.75 in (69.9 mm) Lift cylinders – tip limit 3,810 lb (16.9 kN)
Rod diameter 1.38 in (34.9 mm) Cycle times:
Stroke 16.14 in (410 mm) Raise 3.4 sec
Closed length 24.02 in (610 mm) Lower 1.9 sec
Dump 2.6 sec
K Roll back 1.9 sec
NOTE: *Measured using 66 in (1.68 m) foundry/
excavating bucket.

O Q
A I

B
D
H
C
S T

N J
M

R L
P
E
F
Line drawings are for illustrative purpose only and may not be exact representation of unit.

DIMENSIONS
A. Overall operating height:
with foundry/excavating bucket 153.4 in (3.90 m)
with low profile bucket 157.3 in (4.00 m)
with low profile extended bucket 162.2 in (4.12 m)
Height to:
B. Bucket hinge pin 122.0 in (3.10 m)
C. Top of ROPS 77.7 in (1.97 m)
D. Bottom of level bucket, fully raised 115.2 in (2.93 m)
Overall length:
E. without attachment with coupler 105.7 in (2.69 m)
F. with foundry/excavating bucket on ground 130.1 in (3.31 m)
with low profile bucket 134.3 in (3.41 m)
with low profile extended bucket 139.8 in (3.54 m)
G. Maximum dump angle 39.6°
H. Dump height:
with foundry/excavating bucket 97.2 in (2.47 m) @ 39.6°
with low profile bucket 94.6 in (2.40 m) @ 39.6°
I. Dump reach at maximum height with low profile bucket 24.4 in (0.62 m) @ 39.6°
Maximum attachment rollback:
J. Bucket on ground 31.6°
K. Bucket at full height 98.6°
L. Wheelbase 44.4 in (1.13 m)
M. Ground clearance – bottom of belly pan 7.0 in (0.18 m)
N. Angle of departure 23.0°
Clearance circle:
O. without bucket 50.7 in (1.27 m)
P. with 66 in (1.68 m) foundry/excavating bucket in carry position 78.4 in (1.99 m)
with 66 in (1.68 m) low profile bucket on ground 81.7 in (2.07 m)
with 66 in (1.68 m) extended low profile on ground 86.3 in (2.19 m)
Q. Clearance circle rear 62.9 in (1.60 m)
R. Rear axle to bumper 36.4 in (0.92 m)
S. Tread over gauge with spec lines 53.9 in (1.37 m)
T. Over the tire width spec tires 64.0 in (1.63 m)

SR175 2 of 4
OPTIONAL BUCKETS
Type Width Weight Heaped Capacity
Dirt & Foundry 66 in (1.68 m) 385 lb (175 kg) 14.8 ft3 (0.42 m3)
72 in (1.83 m) 420 lb (190 kg) 16.2 ft3 (0.46 m3)
78 in (1.98 m) 440 lb (200 kg) 17.7 ft3 (0.50 m3)
Low Profile 66 in (1.68 m) 440 lb (200 kg) 13.4 ft3 (0.38 m3)
72 in (1.83 m) 480 lb (218 kg) 14.8 ft3 (0.42 m3)
Low Profile Extended 66 in (1.68 m) 470 lb (214 kg) 15.9 ft3 (0.45 m3)
72 in (1.83 m) 510 lb (232 kg) 17.7 ft3 (0.50 m3)
78 in (1.98 m) 540 lb (245 kg) 19.1 ft3 (0.54 m3)
84 in (2.13 m) 575 lb (262 kg) 20.5 ft3 (0.58 m3)
Light Material 72 in (1.83 m) 475 lb (216 kg) 23.3 ft3 (0.66 m3)
84 in (2.13 m) 540 lb (245 kg) 27.5 ft3 (0.78 m3)
Manure & Slurry 72 in (1.83 m) 480 lb (218 kg) 19.1 ft3 (0.54 m3)
84 in (2.13 m) 545 lb (248 kg) 22.6 ft3 (0.64 m3)
Heavy-Duty 66 in (1.68 m) 450 lb (205 kg) 13.1 ft3 (0.37 m3)
72 in (1.83 m) 510 lb (230 kg) 14.1 ft3 (0.40 m3)
78 in (1.98 m) 530 lb (240 kg) 15.5 ft3 (0.44 m3)
84 in (2.13 m) 550 lb (250 kg) 17.0 ft3 (0.48 m3)

SR175 3 of 4
 STANDARD EQUIPMENT
OPERATOR ENVIRONMENT Integral engine oil cooler LOADER
Fuel filter with water trap
See page 1 Auxiliary front electric control
925 CCA 12V battery
Manual attachment coupler
Master electrical disconnect
ENGINE Radial lift geometry
Loader lift arm support strut
ISM N844LTA-DI-F-50 diesel DRIVETRAIN
135.2 CID (2.2 L) Turbo
2-speed hydrostatic four wheel drive TIRES
Tier 4 Final Certified
ASA #80 drive chain
Spark Arresting Diesel Oxidation Catalyst 10 X 16.5 Heavy duty
(DOC) muffler SAHR disc parking brake
Charged Air Cooler (CAC) OTHER STANDARD FEATURES
High Pressure Common Rail (HPCR) HYDRAULICS
fuel injection Halogen lights – 2 front, 2 side, 2 rear flood
Auxiliary hydraulics:
Horsepower: Heavy duty front lights
@ 3,050 psi (210 bar) – 20.6 gpm
Gross: 67 hp (50.0 kW) (78.0 L/min) Pre-wired for rotating beacon
Net: 64 hp (47.7 kW) Lockable service access hood
6 micron oil filtration system
Peak torque: 153 lb·ft (208 N·m) Single-point daily service
3-spool loader control valve
120 amp alternator Rear tail lights
Auxiliary hydraulic disconnects, ISO
Dual element air cleaner Remote oil drain
flat-face – connect-under-pressure
Organic Acid Technology (OAT) with case drain Remote oil and fuel filters
Anti-freeze solution to -34º F Hydraulic circuit pedal lock Block heater
Fuel tank – 20 gal (U.S.) Auxiliary function lockout override Debris ingression sealing
Over and under radiator and oil cooler Loader lift lockout override Mounting points for add-on counterweights
3-stack after cooler/radiator/ oil Heavy-duty hydraulic oil cooler
cooler configuration
Loader arm float position
Glow plugs
Loader function lockout system

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT HYDRAULICS OTHER
Enclosed cab: High-flow auxiliary hydraulics – combined: Language decals
Fully sealed and pressurized – FSP @ 3,050 psi (210 bar) – 30.7 gpm Buckets – see page 3
Glass door with wiper and washer (116.2 L/min) Bolt-on bucket cutting edges
Sliding side windows – removable Second auxiliary hydraulics Special paint
Heater and air conditioner Hydraulic one-way self-leveling
AM/FM radio with 2 speakers Offsite service arrangement
Ride control Telematics
Keyless start ignition
Electro-hydraulic controls:
For drive/steering, loader functions LOADER FACTORY SUPPLIED ATTACHMENTS
Switchable between H and ISO patterns Hydraulic attachment coupler
Adjustable sensitivity of controls Add-on counterweights
Mechanical hand controls Road lights
DRIVETRAIN Rotating beacon
Hand and foot controls:
Hand controls the loader drive function 1-speed hydrostatic four wheel drive Four-corner LED strobe
and foot controls the bucket and boom Bolt-on heavy-duty bucket teeth
Deluxe cloth, air suspension seat, with heater
and lumbar support SERVICE PARTS
Demolition cab door with polycarbonate
FOPS level 2 3 inch (76.2 mm) retractable seat belt

CaseCE.com
©2019 CNH Industrial America LLC. All rights reserved. CASE is a IMPORTANT: CASE Construction Equipment Inc. reserves the right CASE Construction Equipment is biodiesel-
trademark registered in the United States and many other countries, to change these specifications without notice and without incurring friendly. NOTE: All engines meet current EPA
owned by or licensed to CNH Industrial N.V., its subsidiaries or any obligation relating to such change. Availability of some models emissions regulations. All specifications are
affiliates. CNH Industrial Capital is a trademark in the United States and equipment builds vary according to the country in which the stated in accordance with SAE Standards or
and many other countries, owned by or licensed to CNH Industrial equipment is used. The illustrations and text may include optional Recommended Practices, where applicable.
N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% equipment and accessories and may not include all standard
Always read the Operator’s Manual before
post-consumer fiber. equipment. Your CASE dealer/distributor will be able to give you
operating any equipment. Inspect equipment
details of the products and their specifications available in your area.
before using it, and be sure it is operating
properly. Follow the product safety signs and
Form No. CCE201907SR175 use any safety features provided.
Replaces Form No. CCE201811SR175

SR175 4 of 4