4 3 2 1

ELEMENTAL SERIES WATER BATH

OPERATING MANUAL
NON CIRCULATING WATER BATH CIRCULATING WATER BATH
WLC005 WLS005
WLC012 WLS012
WLC020 WLS020

4 3 2

ASSEMBLY NO.:
ETHOD: 123456789123456789 ALL DIMENSIONS ARE IN MM
AJITH KUMAR DRAWN DATE: 01-08-2021 DESCRIPTION:

SREEJITH KUMAR
DEALER
SREEJITH KUMAR
550.00
CHECKED DATE:
:
APPR. DATE:
01-08-2021
01-08-2021
WLS020 FINAL ASSEMBLY
QUANTITY: 1
: _ AREA (SQ. FT.) SIZE: DRAWING NO. R

E: X FINISH: X A4 DEFAULT
&D _ RELEASE FOR PRODUCTION X DATE: 26-08-2021 WEIGHT: kg. SCALE:1:101 SHEET
WATER BATH
4 3 2 1
.00
WATER BATH 2
 THANK YOU NOTE

We Borosil, one of India’s most customer oriented

brands truly appreciate your business and express our
gratitude for the trust you have placed on us.

We hope your choice serves you well in your scientific

endeavors and aspire to have the pleasure of doing
business with you for years to come.

WATER BATH 3
WATER BATH 4
 TABLE OF CONTENTS

Sr.No. Particular Page No.

1. Packing list........................................................................................ 7
2. Product specification of WLS020/ WLC020......................................... 8
3. Product specification of WLS012/ WLC012......................................... 9
4. Product specification of WLS005/ WLC005......................................... 10
5. Safety and warning............................................................................ 11
6. Safety instructions.............................................................................. 12
7. Unboxing of non circulating elemental series waterbath....................... 13
8. Unboxing of circulating elemental series waterbath............................. 14
9. Product identification of non circulating elemental series waterbath...... 15
10. Product identification of circulating elemental series waterbath............. 16
11. Setting up......................................................................................... 17
12. Getting Started.................................................................................. 18
13. General operating instructions............................................................ 19
14. Description of buttons & functions.................................................. 20
15. Features of WLC & WLS series............................................................ 21
16. Operation of WLC & WLS series......................................................... 31
17. Pop-up errors in WLC & WLS series.................................................... 34
18. Troubleshooting ............................................................................... 35
19. Warranty Registration......................................................................... 37
20. Statement of warranty........................................................................ 39
21. Contact information........................................................................... 40

WATER BATH 5
WATER BATH 6
 PACKING LIST
1. Perforated tray .........................................................................01 No.
2. Leveling shoes
a) WLC020 / WLS020..............................................................06 Nos.
b) WLC012 / WBS012 .............................................................04 Nos.
c) WLC005 / WLS005 ..............................................................04 Nos.
3. Operating Manual ...................................................................01 No.
4. Fuse
a) WLC020 / WLS020 - 8 Amps ...............................................02 Nos.
b) WLC012 / WBS012 - 5 Amps .............................................02 Nos.
c) WLC005 / WLS005 - 2 Amps ...............................................02 Nos.
5. Power Cable ............................................................................01 No.
6. WLS Overhead stirrer
a) WLS005 / WLS012 / WLS020 ................................................01 No.

WATER BATH 7
 PRODUCT SPECIFICATION OF WLS020 / WLC020

PARAMETERS WLS020 WLC020

Internal dimensions (WxDxH) 500mm x 300mm x 150mm 500mm x 300mm x 150mm
Unit External Dimensions (WxDxH) 590mm x 340mm x 415mm 540mm x 340mm x 300mm
Mains voltage 220v - 240v 220v - 240v
Current consumption 7A 7A
Power consumptions 1600w 1600w
Temperature range Ambient to 99°C Ambient to 99°C
Tank material SS 304 SS 304
Display 7 Segment LED 7 Segment LED
Inbuilt temperature probe PT-100 PT-100
Accuracy in temp. (+/-) 0.5 Degree (+/-) 0.5 Degree
Timer Display Yes (Max 99hr:59min) Yes (Max 99hr:59min)
RPM 1500 No
Safety temp limit cut off Yes (99 degree) Yes (99 degree)
Water drain valve Yes Yes
Media stirrer Yes No
Error setting Yes Yes
1 point calibration Yes Yes
2 point calibration Yes ( 37°C & 70°C) Yes ( 37°C & 70°C)
PID settings Yes Yes
Probe error detection Yes ( If any open circuit) Yes ( If any open circuit)

WATER BATH 8
 PRODUCT SPECIFICATION OF WLS012 / WLC012

PARAMETERS WLS012 WLC012

Internal dimensions (WxDxH) 330mm x 300mm x 150mm 330mm x 300mm x 150mm
Unit External Dimensions (WxDxH) 395mm x 340mm x 415mm 375mm x 340mm x 300mm
Mains voltage 220v - 240v 220v - 240v
Current consumption 4A 4A
Power consumptions 900w 900w
Temperature range Ambient to 99°C Ambient to 99°C
Tank material SS 304 SS 304
Display 7 Segment LED 7 Segment LED
Inbuilt temperature probe PT-100 PT-100
Accuracy in temp. (+/-) 0.5 Degree (+/-) 0.5 Degree
Timer Display Yes (Max 99hr:59min) Yes (Max 99hr:59min)
RPM 1500 No
Safety temp limit cut off Yes (99 degree) Yes (99 degree)
Water drain valve Yes Yes
Media stirrer Yes No
Error setting Yes Yes
1 point calibration Yes Yes
2 point calibration Yes ( 37°C & 70°C) Yes ( 37°C & 70°C)
PID settings Yes Yes
Probe error detection Yes ( If any open circuit) Yes ( If any open circuit)

WATER BATH 9
 PRODUCT SPECIFICATION OF WLS005 / WLC005

PARAMETERS WLS005 WLC005

Internal dimensions (WxDxH) 325mm x 175mm x 150mm 300mm x 150mm x 150mm
Unit External Dimensions (WxDxH) 365mm x 180mm x 415mm 330mm x 180mm x 300mm
Mains voltage 220v - 240v 220v - 240v
Current consumption 2A 2A
Power consumptions 400w 400w
Temperature range Ambient to 99°C Ambient to 99°C
Tank material SS 304 SS 304
Display 7 Segment LED 7 Segment LED
Inbuilt temperature probe PT-100 PT-100
Accuracy in temp. (+/-) 0.5 Degree (+/-) 0.5 Degree
Timer Display Yes (Max 99hr:59min) Yes (Max 99hr:59min)
RPM 1500 No
Safety temp limit cut off Yes (99 degree) Yes (99 degree)
Water drain valve No No
Media stirrer Yes No
Error setting Yes Yes
1 point calibration Yes Yes
2 point calibration Yes ( 37°C & 70°C) Yes ( 37°C & 70°C)
PID settings Yes Yes
Probe error detection Yes ( If any open circuit) Yes ( If any open circuit)

WATER BATH 10
 SAFETY AND WARNING

!
Important operating and maintenance instructions.
Read the accompanying text carefully.

Potential electrical hazards.

Only qualified persons should perform procedures associated with this
euipment.
• Equipment must be turned off and disconnected during maintenance/
service.
• Equipment to be connected to power with proper earthing. The
manufacturer is not liable for any injury or death resulting from electrical
hazards due to faulty supply to the equipment.

Ensure to remove the power plug post power failure.

SAFETY INSTRUCTIONS
• On long hours of usage the equipment surface may be heated.
• Do not operate the equipment unattended / unsupervised.
• This is a heating equipment hot surfaces may cause burns & materials
which may be affected by elevated temperatures.
• The Ceramic wool insulation emits fumes in the first few hours of
operation. Ensure proper ventilation during first use.
• Always use proper protective equipments. (Clothing, gloves, goggles, etc.)
• Always follow good hygiene practices.
• Each individual is responsible for his / her own safety.
• Drain the water from the tube only after it reaches to ambient.

WATER BATH 11
• Please note that lowest set value for temperature is ambient +5°C and
highest set value is 99°C.
• Do not run the unit without water. Use always distilled water or RO
water to avoid scaling.
• Never use cracked or leaking containers inside the bath.
• In case of chemical spillage inside the pan, clean immediately. Drain
and clean the bath regularly to prevent organic growth.
• Wipe clean and maintain the bath dry when not in use. Sanitise wipes
are recommended.
• Do not keep unit on wet bench top.
• The unit should be plugged to standard 230V, 3 pin, power socket
having proper earthing.
• If the water spills on the control box, first switch off the unit and wipe dry.
Restart only after unit is dry.
• Do not check the water temperature with your body.

Open the lid during the operation with caution as instant steam
release can cause severe burns.

WATER BATH 12
6 5 4 3 2
UNBOXING OF ELEMENTAL SERIES WATERBATH

ASSEMBLY NO.:
BOROSIL PROJECTION METHOD: 123456789123456789 ALL DIM
UNBOXING INSTRUCTION:
TECHNOLOGIES DRAWN BY: AJITH KUMAR DRAWN DATE: 01-08-2021 DESCRIPTION:

UNIT NO. 21 TO 24,

1. RemoveFIRSTrubber
FLOOR, PLOT shoes,
CHECKED BY:
perforated
NO. 8, ENGG. APPR.:
SREEJITH KUMAR
tray,KUMAR
SREEJITH powerAPPR.
CHECKED DATE:
cable
01-08-2021
DATE: and01-08-2021
agitator. WBS012
INDIALAND GLOBAL MATERIAL: QUANTITY: 1
2. Remove the Water Bath unitCODE:
COLOUR safely.
INDUSTRIAL PARK, _ AREA (SQ. FT.) SIZE: DRAWING NO.
HINJEWADI PHASE 1,
PRODUCT CODE: X FINISH: X A4
PUNE - 411057
3. Any damage at receipt should be reported to the dealer / delivery
RELEASE FOR R & D _ X agent.
RELEASE FOR PRODUCTION
DATE: 26-08-2021 WE

6 5 4 3 2

(Read manual before installation on the lab bench.)

WATER BATH 13
 UNBOXING OF CIRCULATING ELEMENTAL WATERBATH
6 5 4 3 2

ASSEMBLY NO.:
BOROSIL PROJECTION METHOD: 123456789123456789 ALL DIMENSIONS
UNBOXING INSTRUCTION:
TECHNOLOGIES DRAWN BY: AJITH KUMAR DRAWN DATE: 01-08-2021 DESCRIPTION:

UNIT NO. 21 TO 24, CHECKED BY:

FIRST FLOOR, PLOT NO. 8,
SREEJITH KUMAR
ENGG. APPR.: SREEJITH KUMAR
CHECKED DATE:
APPR. DATE:
01-08-2021
01-08-2021
WLS020 FINAL
1. RemoveINDIALAND
rubber shoes,
GLOBAL perforated tray, power
MATERIAL: QUANTITY: cable1 and agitator.
INDUSTRIAL PARK, COLOUR CODE: _ AREA (SQ. FT.) SIZE: DRAWING NO.
HINJEWADI PHASE 1, A4 DEFAU
2. Remove the Water Bath
PUNE - 411057
PRODUCTunit
CODE:safely.
X FINISH: X
RELEASE FOR PRODUCTION X DATE: 26-08-2021 WEIGHT: kg.
RELEASE FOR R & D _
6 5 at receipt should4be reported to the dealer
3. Any damage 3 / delivery agent.2

(Read manual before installation on the lab bench.)

WATER BATH 14
 PRODUCT IDENTIFICATION OF ELEMENTAL WATER BATH

A. PERFORATED TRAY
B. CONTROL PANEL
C. ON/OFF
D. POWER SOCKET
E. COOLING FAN
6 5 4
F. DRAIN VALVE
G. DRAIN PIPE CONNECTOR
H. RUBBER SHOES
D

3 2 1

C B D

ASSEMBLY NO.:
BOROSIL PROJECTION METHOD: 12345
TECHNOLOGIES DRAWN BY: AJITH KUMAR DRAWN DATE
A C UNIT NO. 21 TO 24, CHECKED BY: SREEJITH KUMAR CHECKED DAT
FIRST FLOOR, PLOT NO. 8, ENGG. APPR.: SREEJITH KUMAR APPR. DATE:
INDIALAND GLOBAL MATERIAL: QUANTITY:
D
INDUSTRIAL PARK, COLOUR CODE: _ AREA (SQ. FT.)
HINJEWADI PHASE 1,
PRODUCT CODE: X FINISH:
PUNE - 411057
RELEASE FOR R & D _ RELEASE FOR P

6 E5 4

BG
H

WATER BATH 15
ASSEMBLY NO.:
123456789123456789 ALL DIMENSIONS ARE IN MM
AR DRAWN DATE: 01-08-2021 DESCRIPTION:
 PRODUCT IDENTIFICATION OF CIRCULATING
ELEMENTAL WATER BATH
A. PERFORATED TRAY
B. AGITATOR
C. CONTROL PANEL
6 5 4
D. ON/OFF
E. AGITATOR CONNECTOR
F. POWER SOCKET
D
G. COOLING FAN
H. DRAIN VALVE
I. DRAIN PIPE CONNECTOR
J. RUBBER SHOES
A

B C

3 2 1

C
B
D D

ASSEMBLY NO.:
BOROSIL PROJECTION METHOD: 12345
TECHNOLOGIES DRAWN BY: AJITH KUMAR DRAWN DATE:
A UNIT NO. 21 TO 24, CHECKED BY: SREEJITH KUMAR CHECKED DAT
FIRST FLOOR, PLOT NO. 8, ENGG. APPR.: SREEJITH KUMAR APPR. DATE:
C INDIALAND GLOBAL MATERIAL: QUANTITY:
INDUSTRIAL PARK, COLOUR CODE: _ AREA (SQ. FT.)
HINJEWADI PHASE 1,
PRODUCT CODE: X FINISH:
E PUNE - 411057
RELEASE FOR R & D _ RELEASE FOR P

6 5 4
F

B
H

J
ASSEMBLY NO.:
123456789123456789 ALL DIMENSIONS ARE IN MM
MAR DRAWN DATE: 01-08-2021 DESCRIPTION: WATER BATH 16
KUMAR CHECKED DATE: 01-08-2021
WLS020 FINAL ASSEMBLY A
KUMAR APPR. DATE: 01-08-2021
QUANTITY: 1
 6 5
SETTING UP

100 mm
D

100 mm

Figure: 17.1
C
1. Insert the leveling shoes at the base and tighten it.
586.00
2. Make sure that minimum 100 mm gap is maintained between body and
wall as shown in fig. 17.1
3. Ensure that the power switch is in “OFF” position.
4. Please ensure there is a fuse in the fuse holder.
350.00
5. Connect the male end of power cable to the wall socket.
6. The unit is ready to operate for first usage.

WATER BATH 17
BOROSIL PROJECTION
 FIRST TIME OPERATION
1. Connect the power supply to a properly earthed power socket.
2. Fill the water till the filling step in the tank.
3. Switch ON the wall power socket.
4. Switch ON the red illuminated switch which is given on the back side of
the unit.
5. Set the temperature to 90°C. (SETTING THE TEMP. EXPLAINED IN OPERATION
OF THE WLS/WLC SERIES).

! CAUTION !

6. Once the process started, user can see the temperature rising in the display.
7. Please ensure adequate ventilation is proper during first operation for
protection from fumes emitted by Ceramic insulation.
8. Check whether the current is flowing in the body by using a tester, do not
touch the unit by bare hands.

WARNING !

9. If the tester lights, switch off the unit and remove the power cable from the
wall and check earthing. If the problem persist, do not operate the unit
and please contact Borosil Service Center.
10. Once the fumes are reduced (normally past 5 minutes to 10 minutes of
operation), set temperature to approx ambient temp. and switch OFF.
11. Allow the unit cool to ambient temperature.
12. Now the unit is ready for regular usages.

WATER BATH 18
 GENERAL OPERATING INSTRUCTIONS
1. Place the perforated tray inside the tub.
2. Pour the distilled water till the filling step of the tank.
3. Place the flasks on the perforated tray (Follow the guiding marks on the
perforated tray).
4. Place the cap on the unit with ring set, in the position.
5. In case of operations, please make sure that the weight is balanced after
connecting the apparatus in retort stand.
6. Switch ON power.
7. Set the desired temperature by using controller ( Min 25°, Max 99°).
8. Do not pour or spill the liquid on the control box. If any water drop falls,
wipe dry.
9. It is recommended to set the ambient temp. before switching it off.
10. After operation it is recommended, drain the water from the tub.

WATER BATH 19
 DESCRIPTION OF BUTTONS & FUNCTIONS

1. SET :
• Single press selects the parameter which needs to be set and also to
start the process.
• Long press is used to enter in to the setting menu.

2. UP ( ) :
• To increase the set point values and to scroll up the setting
menu.

3. DOWN ( ) :
• To decrease the set point values and to scroll down the setting
menu.

4. RESET ( ) :
RST

• Single press used to go back to previous state (back function) and

to exit from settings mode.
• Long press used to exit from the settings menu and to stop the
process.

WATER BATH 20
 FEATURES OF WLS & WLC SERIES
• Long press SET button to enter SETTINGS menu while current temperature is
displayed on first display and time is 00:00 on second display.
• In settings, Left side display will show Parameter while right side display shows
selected previous stored values.
• To change value of Parameter single press SET button then second display will start
blinking. To change current values press or button.
• For save that change values, single press SET button. Second display will stop
blinking and user will see the selected values of parameter on second display.
• If user don’t want to change the values of parameter and want the previous selected
values of parameter then single press RST button and parameter will stop blinking
and user will see the previous slected parameter’s values on second display.

1. Stirrer

• This feature is available only for WLS series and not for WLC series.
• This feature is used to on and off stirrer.

WATER BATH 21
2. Unit

• User can select temperature’s unit in °C (degree celsius) or °F (degree

fahrenheit).
3. Safe
• In this feature, user can lock the maximun set temperature.
• If selected unit is °C then user can select between ambient to maximum
value of 99°C.

• Example : If the user locks internal set temperature value to 55°C using
the safe function and saves it, then user can only set probe temperature
value upto on 55°C.

WATER BATH 22
• If selected unit is °F then user can select between ambient to maximum
value of 212°F.

• Example : If the user locks internal set temperature value to 125°F using
the safe function and saves it, then user can only set probe temperature
value upto on 125°F.

4. Selection of calibration mode

• In this feature, user can select calibration mode between single point
calibration and two point calibration as per their requirement.

WATER BATH 23
5. One point calibration
• In the One point calibration feature, the second display will show raw
temperature.
• If the reference thermometer/ Master calibrated device shows 35.4°C or
the correct temperature then single press SET button.
• First two values will start blinking then press the decrement button, after
setting 34 press SET button to set .4 and value after decimal will start to
blink.

• To save these values press the SET button and display stop blinking and
show you the raw temperature value.
• Error calculation is done automatically and it adds in curent temperature
as the selected value calibration is one point calibration.
• If you don’t want to save the values press the RST button until values stop
blinking and show you the raw temperature value.

WATER BATH 24
6. Two point calibration
• In this feature the user can calibrate at two points, Low point and High
point.
• Low points can calibrate between 30°C to 50°C.
• High point can calibrate between Low point of calibration +10°C to
90°C. However we recommended the high point to be kept lower than
75°C.
Example
• If the user wants to calibrate the water bath at 45 and 77, select CAL2
feature.

• Press SET button and set low point 45.

• After setting the low point, press the SET button and high point window
will pop up. Set high point 70 and press SET button.

WATER BATH 25
• It starts heating.

• After reaching a set low point temperature, one display will show the set
temperature while the other will show the current temperature and buzzer
starts beep and red alarm led is ON.

• Press the SET button and put the master’s/ calibrated thermometer
temperature.

• Press SET button and it starts heating again for set high point temperature.

WATER BATH 26
• After reaching a set high point temperature, one display will show the set
temperature while the other will show the current temperature and buzzer
starts beep and red alarm led is ON.

• Press the SET button and put the master’s/ calibrated thermometer
temperature.

• When the window will show calibrated saved then two point calibration is
done successfully.

Note: If the set temperature is reached and within 30 min there is no

interuption from the user then the process automatically turns off.

WATER BATH 27
7. Time

Total Time
• If user select total time then timer starts countdown after starting the
process immediately.

Soak Time
• If the user selects soak time then timer starts countdown after reaching
the set temperature.

8. PID Settings

• For Precise control PID values need to be set.

WATER BATH 28
 This is a critical setting and should be done only by the service
engineer.

9. Factory Reset

• This is a factory reset option. If the user selects this option then the
product will reset and all by default value of features will be restored.
Any existing setting and calibration values will be discard.

Factory reset will discard the safe temperature value, please

reinitiate safe temperature value before resuming operation.

• Press the SET button and it will ask for confirmation for factory reset.

WATER BATH 29
• Press the SET button and reset of the unit will start.

• Reset done window pops up and it goes to the home page after the
factory reset is done.

WATER BATH 30
 OPERATIONS OF WLC & WLS SERIES
• Default power ON state - It will check whether the probe is connected or
not.
• If probe is connected it displays the current temperature and time,
otherwise it will display the probe error.

• PRESS SET button to set parameters.

• Use & buttons to increase and decrease the set point values.
• User can set
1. Max. temp 99°C or 212°F .
2. Max. time (hour:min) 99:59

WATER BATH 31
• After setting the time the process starts.
• The process will stop after reaching the set time given by the user.
• If the user set the set time to 00:00 the process will not start.
• Once the process is started, Process window will be shown.
• At the same time Set window will be displayed alternatively.

• Above window will show if selected unit is °C.

WATER BATH 32
 • Above window will show if selected unit is°F.

FOR WLS SERIES

• User can change the motor status during the process.

• Single press the set button and user can change the motor status by
using or button.

• To save the change status of motor again single press the SET button.
• To discard the change status of motor single press the RST button.

WATER BATH 33
 POP UP ERRORS IN WLC & WLS SERIES
1. Probe Error

• This display will shown probe error if the probe is open or the probe is
defective.
• And buzzer will beep.
• If the error window is displayed by the system during the process
(the controller will stop the heating and timer will be paused).
• Connect the probe to continue the process or call service support.

2. Fill Bath Error

• This display will shown fill bath error if the water tub level is low.

• When process starts, it checks whether water tub level is low or not if and only if the

set temperature in °C is ambient +12 °C and in °F ambient +15°F.

• It will pause the process timer and stop heating till the water is upto full level.

• If user want to run water bath in low level then single press the RST button and it

will resume the process.

WATER BATH 34
 TROUBLESHOOTING

S.NO. PROBLEM SOLUTION

1. The unit is not • Check the supply in AC mains.

turning ON • Make sure power cable is inserted to the
socket properly.
• Check whether the main switch is ON or
OFF.
• Ensure the main switch is ON.
• Check if the unit is heating and rthe switch
is not illuminating, the switch needs to
replace.
• If the unit is not heating, please check the
fuse.
2. If the fuse is blown • Switch OFF the unit and remove power
cable from AC mains.
• Unscrew the red cap on the fuse
holder.
• Remove the glass tube fuse.
• Check if the fuse if blown.
• If the fuse is blown, replace it with the new
fuse which is mentioned in the check list.
3. No or low heating • Ensure the unit is ON.
• Ensure the temperature controller is not set
at zero.
(Temperature controller shows OUT
indication if the heater supply is ON)
• If the heating power id lower than previous
noticed value for tempertaure controller, it
may be damaged.
• If the problem persists, please contact
Borosil Service Center.

WATER BATH 35
WATER BATH 36


WARRANTY REGISTRATION
Please handover this registration form to the distributor from where you have purchased this
product. The warranty is valid only when this warranty registration form is received by us
within 30 days from the date of purchase.

Product: ELEMENTAL SERIES WATER BATH

WLS020 WLC020 Product Sr. No.: ____________________________
WLS012 WLC012 Date of Invoice: ____________________________

WLS005 WLC005 Invoice No.: _______________________________

Customer name & address Customer sign & seal

Name : ___________________________
__________________________________
Address: __________________________
__________________________________
__________________________________
__________________________________

Telephone: ________________________
E-mail: ___________________________

Dealer name & address Dealer sign & seal

Name : ___________________________
__________________________________
Address: __________________________
__________________________________
__________________________________
__________________________________

Telephone: ________________________
E-mail: ___________________________

WATER BATH 37
WATER BATH 38
Borosil confirms that this product has been manufactured in accordance with our technical
specifications and quality requirements.
• Borosil warrants the product from manufacturing and workmanship defects for a period of 12
months from the date of invoice.
• Warranty is void, if apparatus is not operated as prescribed in the operating manual supplied
along with the unit.
• To be covered under warranty.
» Units have to be connected to standard 230V 50Hz, 15A wall sockets with proper earthing
for WLS020 and WLC020.
» Units have to be connected to standard 230V 50Hz, 6A wall sockets with proper earthing
for WLS012, WLC012, WLS005 and WLC005.
» Corrosion damage to the tank due to spillage of chemical will not be covered under
warranty.
» Warranty does not cover replacement of heating element more than once.
» Warranty does not cover corrosion and physical damage due to environmental condition
at the installed site or due to improper handling.
Terms:
» In the event of malfunction due to defect, the buyer will have to follow the Borosil’s service
process.
» Certain units can not be serviced / rectified at the buyer’s place and the units may have to
be brought to Borosil’s service center as advised by Borosil’s representatives.
» In no event shall Borosil be liable for consequential or incidental damages.

INVOICE DATE BUYER

AFFIX
INVOICE# SERIAL NUMBER

Dealer name & address Dealer sign & seal

BOROSIL LIMITED
Corporate Office : 1101, Crescenzo G-Block, Opp. MCA Club, Bandra Kurla Complex, Bandra (E), Mumbai-400051, India

WATER BATH 39
 : MANUFACTURED BY : : MARKETED BY :
Borosil Technologies Ltd. Borosil Limited
Plot No. 7, Sr. No. 234, 235, & 245, 1101, G-Block, Parinee Crescenzo,
Indialand Global Industrial Park,
Hinjewadi Phase 1, Pune - 411057 BKC, Bandra East, Mumbai - 51
Write to us on above address. Maharashtra, India

: CUSTOMER CARE CONTACT :

Phone : 1800 22 4551 | Email : [email protected]
Website WATER
: www.labquest.co
BATH 40