S.

NO DESCRIPTION UNIT QTY

|Subhead|-Wiring and Conduit

|Supply, Installation, Testing &Commissioning of Wiring for
|circuit/ submain wiring alongwith earth wire with the following
1 |sizes of FRLS PVC insulated copper conductor, single core
cable in EXISTING Surface/ recessed MS conduit as
|required
|2 x 1.5 sq. mm + 1 x 1.5 sq. mm earth wire Mtr 57500
|2 x 2.5 sq. mm +1x2.5 sq. mm earth wire Mtr 3850
b
Mtr 16700
|2 X4 sq. mm + 1X2.5 sq. mm earth wire
|4 X4 sg. mm + 2 X2.5 sg. mm earth wire Mtr 75
Supply, nstallation, Testing & Commissioning of following
|sizes of MS conduit along with accessories in surface/recess
2 includingcuting the wall and making good the same in case
of recessed conduit as required
Mtr |15000
a 20 mm
Mtr 25000
25 mm
Mtr 500
32 mm
3
|Supply, Installation, Testing & Commissioning of followingin
sizes of FRLS PVC conduit along with accessories
surface/recess including cutting the wall and making good
the same in case of recessed conduit as required
Mtr 100
20 mm
Mtr 100
b 25 mm
Mtr 100
C 32 mm

TotalCarried Summary

Subhead I| - Switch and Socket

the following
Supply, Installatiom, Testing &commissioing of sockets etc.
sizes of metal boxes, modular plates, switches,
|complete with required chasing, half filling with cement,
2 mortar etc.
Nos. 50
1/2 Module Metal Box
3 Module Metal Box |Nos. 800
Nos. 50
C 4 Module Metal Box
Nos.
6 Module Metal Box
Nos.
8Module Metal Box
Nos. 50
f 1/2 Modular Plate
Nos. 800
3 Modular Plate
 Nos. 50
Modular Plate
h Nos.
6 Modular Plate
Nos.
8 Modular Plate
Nos. 375
k |6Aone way switch
6a twoway switch
Nos.
16 A one way switch Nos. 560
m

6/16 A3/5 pin socket Nos. 560

n
6A3 pin socket Nos. 140
RJ-11 socket Nos.
RJ-45 socket Nos.
T.V. coaxialoutlet Nos.
TOAL AMOUNT

3 Sub Head - II|-Distribution Board

1 Supply, Installation, Testing & Commissioning of following
way, single pole and neutral, sheet steel, MCB distribution
board, 240 V, on surfacel recess, complete with tinned
copper bus bar, neutral bus bar, earth bar, din bar.
interconnections, powder painted including earthing etc. as
required. (But without MCB/RCCB/Isolator)
1.1 12 Way, Double Door
Each
RO
1.2 |8 VWay, Double Door
Each
1
1.3 6 VWay, Double Door

Each 4
2 Supply, Installation, Testing &
Commissioning
|way, horizontal type three pole and
neutral,
of following
sheet steel, MCB
distribution board, 415 V, on
|tinned copper bus bar, neutralsurfacel recess, complete with
bus bar, earth bar, din bar,
interconnections, powder painted
required. (But without MCB/RCCB/ including earthing etc. as
lsolator)
2.1 |4 way (4+12),
Double door
Each
2.2 6 way
(4+18), Double door
1
Each
2.3 8 way (4+24),
Double door
1
Each
 3 Supply, Installation, Testing &
ways surface/ recess mounting, Commissioning
vertical type,
of of following
MCB distribution board of sheet steel, 415 V, TPN
dust protected, duly
powder painted, inclusive of 200 A tinned copper bus bar,
common neutral link, earth bar, din bar for mounting MCBs
(but without MCBs and incomer ) as
Vertical type MCB TPDB is normally used required (Note :
where 3 phase
outlets are required.)
3.1 12 way (4 + 36), Double door
11
Each

4 Supply, Installation, Testing &Commissioning of 5 Ato 32 A

rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker
suitable for inductive load of following poles in the existing
MCB DB complete with connections, testing and
Commissioning etc. as required.

4.1 Single Pole Each 462

5 |Supply, Installation, Testing & Commissioning of following

rating, double pole, 240 V, isolator/MCB in the existing MCB
DB complete with connections, testing and commissioning
|etc. as required.
Each RO
5.1 63 amps

Each RO
5.2 40 amps
following
6 Supply, Installation, Testing & Commissioning of MCB DB
existing
rating, four pole, 415 V, isolator/MCB in the
commissioning etc.
complete with connections, testing and
as required.
6.1 63 amps Each 12

Each 2
6.2 40 amps

of following
7 Supply, Installation, Testing & Commissioning
neutral), 240 V
rating, double pole, (single phase and sensitivity
residual current circuit breaker (RCCB), having a with
DB Complete
lcurrent 30 mÀ in the existing MCB
connections, testing and commissioning etc. as required.

7.1 63 amps Each 36

 Each 11

6.3 140 amps

Commissioning of single pole
Testing & Each 20
|Supply, Installation, existing MCB DB complete etc. as
blanking plate in the
required.

ISOLATOR PANEL BOXES commissioning of

9. testing and
Assembling, erecting, IP-55 enclosure and
1
9.1 |Supply, mounted lsolator box with Sets 10
wal/ floor
of 10 KA.
No. 40 AMP, 4P MCB and commissioning of1
Assembling, erecting, testing and
9.2 |Supply, mounted lsolator box with IP-55 enclosure
|wal/ floor Sets RO
10 KA.
No. 63 AMP, 4P MCB of commissioning of
Assembling, erecting, testing and 1
9.3 Supply, mounted Isolator box with IP-55 enclosure and
wal/ floor Sets RO
KA.
No. 63 AMP, 4P MCCB of 16
Assembling, erecting, testing and commissioning of
9.4 Supply, mounted Isolator box with IP-55 enclosure and 1
wal/ floor
No. 125 AMP, 4P MCCB of 16 KA. Sets RO

Assembling, erecting, testing and commissioning of

9.5 Supply,
wal/ floor mounted Isolator box with IP-55 enclosure and 1
No. 200 AMP, 4P MCCB of 25 KA.
Sets 3

9.6 Supply, Assembling, erecting, testing and commissioning of

wal/ floor mounted lsolator box with IP-55 enclosure and 1
No. 250 AMP, 4P MCCB of 25 KA.
Sets 1
9.7 |Supply, Assembling, erecting, testing and commissioning of
wal/ floor mounted Isolator box with IP-55 enclosure and 1
No. 315 AMP, 4P MCCB of 25 KA.
Sets 1

TOTAL