Scribd
Upload
93 views2 pages

Lexmark C950/X95X - Image Misalignment or Color Shifting: Problem

This document provides information about image misalignment or color shifting issues that may occur on Lexmark C950/X95X printers. Specifically, it describes how color alignment defects may appear as excess white lines or spaces around colored areas. It suggests powering the printer off and on 3-5 times to allow the auto color correction and alignment process to fix the issue, and ensures the color correction setting is set to auto. It also provides contact information if the issue persists after trying the suggested remedies.

Uploaded by

Alejandro Echeverria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
93 views2 pages

Lexmark C950/X95X - Image Misalignment or Color Shifting: Problem

This document provides information about image misalignment or color shifting issues that may occur on Lexmark C950/X95X printers. Specifically, it describes how color alignment defects may appear as excess white lines or spaces around colored areas. It suggests powering the printer off and on 3-5 times to allow the auto color correction and alignment process to fix the issue, and ensures the color correction setting is set to auto. It also provides contact information if the issue persists after trying the suggested remedies.

Uploaded by

Alejandro Echeverria
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Document

Lexmark C950/X95X – Image Misalignment or Color Shifting ID:SO6792

Usergroup :External
   
12%25252525252525252F09%25252525252525252F11  
German   English   Spanish   French   Italian  

Lexmark C950  Lexmark X950  Lexmark X952 


Lexmark X954 

Problem

Voids; halos

Solution

What you will see 


Color alignment defects may appear as excess white lines or white spaces around colored areas. NOTE: Sometimes the image may
show as being shifted. See the examples below:

Click Images to Enlarge

Suggested remedy 
IMPORTANT! Make sure that the Color Correction is set to Auto.

To correct the issue, power off the printer and wait for ten seconds before powering it back on. Do this procedure 3 – 5 times to allow the
printer to perform the Auto Color Correction and Alignment process.

NOTE: By default, the Color Correction and Alignment is set to Auto. If the printer does not perform the process during power up,
it could have been set to “manual”. To change this setting, navigate through:

1. Menus > Settings > Print Settings > Quality Menu.

2. Look for the option “Color Correction” and use the buttons   or  to change the setting to “Auto”.

3. Press the   button to apply the changes.

Still need help? 

If you require additional assistance, please close this window and locate   Get In Touch with Lexmark! for contact information.
NOTE: When calling for support, you will need your printer model/machine type and serial number (SN). If you need help locating these,
click here.

Please be near the products described in this article to expedite the support process and reduce callbacks.

You might also like