The Bank of China Tower

The Technology building to resist wind load and earthquake | SMEE Kamchann
_____________________________________________________________________________________
The Bank of China Tower

The Bank of China Tower was built in Hong Kong, 1989 by Architect: I.M. Pei on the 8000 m2
plot Area with the 370m eight. The glass façades of the building reflect the light and its
surroundings, so it is like a bright and shiny white crystal. The whole structure is supported by
the four steel columns at the corners of the building and one in the center of the building, with
the triangular frameworks transferring the weight of the structure onto these five columns. It is
covered with glass curtain walls.
Loads action effected to the high rise building Bank of China Tower (Under construction)
2. The Designing resists wind load and/or earthquake
The foundation
It was set by several caissons. The caisson foundation consists of concrete columns constructed
in cylindrical shafts excavated under the proposed structural column location. It carries the building load
at their lower end, which are often bell-sharped. Concrete is placed(poured)into steel forms built up along
the perimeter of the box
Edited by SMEE Kamchann 1

_____________________________________________________________________________________
Column
The shape causes eccentric load. Off-center loads would cause excessive stresses in columns. The
solution is that using uniform shear force mechanism that could counteract and eliminate the bending. The
system is outstanding of its economy of material.
Shear Wall
Only a small portion of the loads carried to the service cores in the lower floors flows directly to the
foundations.
Story 51 and 52 Story 38
Story 25 Story 4
• Cross baces methode

The architect used a less steel for the building’s construction. The cross braces and triangular framework
of the building are designed to withstand typhoons and make structurally effective:
• Triangular shape as most structural stable geometry
• Carries building load, and reduces use of steel by 30% as compared to typical column and beam
system

_____________________________________________________________________________________
Truss
• Common structural element in architecture.
• Steel members are joined together into triangular shapes, which are able to resist external
forces.
• When joined together, these triangles can form large truss systems that can span long distances.
 Earthquake
There are a number of stategies that can be used to reduce the impact of earthquakes in this building. the
buidling can never be made totally earthquake proof. However there are a number of ways that existing
buildings can be made more resistant to earthquake damage.
New building can be designed to have a number of structural features which are more likely to
provide resistance to the damaging effects of earthquakes. Structural damage could still occure, buth the
saftety of the people inside the buildings is greatly enhaced by these special features.
• Base isolation
This works by essentially separating the building from

the moving ground during an earthquake. It will move
with the ground, buth the movement to the rest of the
building is minimised by the provision of special features.
Base Isolation system
• Diagonal Bracing
Shearing forces as distinct to push and
pull forces, can cause tremendous damage to buildings.
Diagonal bracing helps to minimise the effect to these
shearing forces during an earthquake.
• Passive damping
It involves using a range of techniques. The main objective is to absorb the energy without allowing it to
impace on the main structure of the building. Certain methods use materials which will deform easily and
therefore absorb the energy, without breaking. Other techniques inclide the use of large masses which are

_____________________________________________________________________________________
made to move out of phase with the movement caused by the earthquake. This tends to cancel out the
disturbace, just like a trough of a wave in water meeting a crest of the wave will result in calm water(
Destructive interference in waves…)
Reference : http://slideplayer.com/slide/10483437/
https://www.slideshare.net/Tarique048/caisson-foundationppt
https://www.slideshare.net/tudorgeog/earthquake-3-ps-nsr

The Bank of China Tower

Uploaded by

Copyright:

Available Formats

The Bank of China Tower

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

The Bank of China Tower

Uploaded by

Copyright:

Available Formats

The Technology building to resist wind load and earthquake | SMEE Kamchann

The Bank of China Tower

2. The Designing resists wind load and/or earthquake

Edited by SMEE Kamchann 1

Story 51 and 52 Story 38

• Cross baces methode

Edited by SMEE Kamchann 2

This works by essentially separating the building from

Base Isolation system

Edited by SMEE Kamchann 3

Edited by SMEE Kamchann 4

You might also like