Scribd
Upload
83 views1 page

13MM DDX FWupdate en

This document provides instructions for updating the firmware on 2013 navigation/multimedia receivers. It describes downloading the update files and copying them to USB storage to use for the update. The update process takes about 30 minutes and users are warned not to remove the USB storage or turn off the receiver during the process. Finally, users are instructed to reset the receiver after the update and check that the firmware version has successfully updated.

Uploaded by

celma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
83 views1 page

13MM DDX FWupdate en

This document provides instructions for updating the firmware on 2013 navigation/multimedia receivers. It describes downloading the update files and copying them to USB storage to use for the update. The update process takes about 30 minutes and users are warned not to remove the USB storage or turn off the receiver during the process. Finally, users are instructed to reset the receiver after the update and check that the firmware version has successfully updated.

Uploaded by

celma
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2013 NAVIGATION/MULTIMEDIA Receiver Firmware Update Guide

Introduction 2. Touch the [System Information] to display the System


Information screen.
• This document describes the procedure and precautions for
upgrading the 2013 NAVIGATION/MULTIMEDIA receiver firmware.
• If an error occurs while you are updating the firmware, the 2013
NAVIGATION/MULTIMEDIA receiver may become unusable. Be sure
to read the following procedure and precautions carefully before
updating the firmware.

Target Models
This updater can be used to update the firmware of the following
models.
DDX790 DDX770 DDX7070BT DDX6053BT
DDX6033BTM DDX6033BT DDX6033 DDX6023BT
DDX470 DDX42BT DDX4070BT DDX4053BT
DDX4033M DDX4033BTM DDX4033BT DDX4033
DDX4023BT DDX370 DDX35 DDX3070
DDX3053 DDX3023 3. Check the version.

Target Firmware
This updater can be used to update the following firmware version:
Ver G11.05.00 or earlier
To check the firmware version, refer to “Checking the Firmware
Version” below for information on how to check the firmware version.
By executing this updater, the firmware version will become Updating the Program
“Version G11.06.00”.
1. Touch the [SETUP] to display the Top Menu screen.
Work Flow 2. Touch the [System Information] to display the System
Information screen.
Step 1. Download the firmware files, and copy them to USB
3. Touch the [Update].
memory.
Step 2. Update the firmware. (It takes about 30 minutes.)
Reset the unit.
Step 3. Check that the firmware has been updated.

Creating the Update Media


Create the update media on your PC. 4. Connect the USB memory to update starts. (It takes about
1. Download the Updates from the Web site. 30 minutes.)
2. Decompress the downloaded file. Caution: The screen may go blank for a few seconds.
3. Copy the decompressed file to the top of hierarchy in USB Do not unplug the USB memory or Power Off the unit
memory. during the Update Procedure.
⁄ 5. System Reboot & Software Update Screens.
• USB memory is recommended as the update media. 6. Once the “Update completed” screen is displayed, remove
• You can also copy the updater to a device containing audio files and
the USB memory.
update the firmware from it.
• Update cannot be performed if it is copied inside a folder. 7. Reset the unit.
• If the updater file name is changed, update cannot be performed. 8. Check that the firmware version is updated, by referring to
“Checking the Firmware Version”.
Checking the Firmware Version When “Version G11.06.00” is displayed, the firmware version
1. Touch the [SETUP] to display the Top Menu screen. is updated successfully.

Precautions
• Update cannot be performed with other media.
• Be sure to park the vehicle in a safe place before updating. Keep the
engine running in order to prevent battery from running out.
• Do not turn off the engine or Navigation/Multimedia receiver power
while updating. Update cannot be performed correctly and the
Navigation/Multimedia receiver may become unusable.

1503_13MM_DDX_FWupdate_en

You might also like