0% found this document useful (0 votes)
75 views8 pages

Power Control For Marine Applications 351458B

The document discusses Woodward's easYgen power control solution for marine applications. The easYgen system provides load control and start/stop functions through communication with power management systems. It allows monitoring of engine, generator, and breaker status using a single communication link. The solution meets dynamic positioning requirements and can be used across engine types through CAN J1939 communication. It provides synchronization, load sharing, and other benefits to shipyards, power designers, and engine suppliers.

Uploaded by

vichit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
75 views8 pages

Power Control For Marine Applications 351458B

The document discusses Woodward's easYgen power control solution for marine applications. The easYgen system provides load control and start/stop functions through communication with power management systems. It allows monitoring of engine, generator, and breaker status using a single communication link. The solution meets dynamic positioning requirements and can be used across engine types through CAN J1939 communication. It provides synchronization, load sharing, and other benefits to shipyards, power designers, and engine suppliers.

Uploaded by

vichit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Power Control Solutions

for Marine Applications MANAGE YOUR POWER REQUIREMENT


AT SEA WITH ONE SYSTEM

For Switchgear Builders For Power Management System Designers


Load control strategy by PMS to easYgen
Start/stop command by PMS through easYgen communication link or automatic start/stop based on load demand
• Synchronization Communication with LS-5 for complex network segmentation with feeder/tie breakers
• Start/stop One communication link between PMS and generator set for all engine and generator information leading to less
• Engine and generator monitoring components for the power plant. The easYgens share operating variables with the PMS including:
• One set of PTs and CTs for multiple purposes • breaker status
• Breaker status monitoring • active and reactive power, power factor
Local/remote control • voltage, current, and frequency on all three phases
Front mounting or back panel mounting with remote • Engine sensor values like oil pressure, coolant temperature (via CAN J1939)
display available
CAN and ModBus communication link
• Supports Woodward or third-party I/O extensions
• Supports Woodward or third-party displays

For Shipyard and Ship Owners POWER GENERATION


Always Innovating for a Better Future
Meets your DP / DP3* PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker
requirements

and engine control


Commissioning by a single
For Engine and Generator Set Suppliers
Woodward trained engineer LS-5
for the whole power plant Load sharing
Worldwide support network Same unit can be used for
• Europe, Middle East, and Africa a wide range of engines
• North, Central, and South America Application note available
• Russia, China, and India for engine integration with
• ASEAN and Oceania CAT ADEM, MAN SaCos,
The most experience in power MTU ADEC, …*
generation in the marine market CAN J1939 communication
Independent supplier with ECU
External engine-derating

*DP: Dynamic Positioning

www.woodward.com
Your Beneits ONE SOlUTION
INFINITE POSSIBIlITIES

For Switchgear Builders For Power Management System Designers


Load control strategy by PMS to easYgen
Start/stop command by PMS through easYgen communication link or automatic start/stop based on load demand
• Synchronization Communication with LS-5 for complex network segmentation with feeder/tie breakers
• Start/stop One communication link between PMS and generator set for all engine and generator information leading to less
• Engine and generator monitoring components for the power plant. The easYgens share operating variables with the PMS including:
• One set of PTs and CTs for multiple purposes • breaker status
• Breaker status monitoring • active and reactive power, power factor
Local/remote control • voltage, current, and frequency on all three phases
Front mounting or back panel mounting with remote • Engine sensor values like oil pressure, coolant temperature (via CAN J1939)
display available LS-5
CAN and ModBus communication link 690 V MBB1 MBB2 690 V
• Supports Woodward or third-party I/O extensions TB1
• Supports Woodward or third-party displays
GB1 GB2 FB1 TB3 TB4 FB3 GB3 GB4
LS-5 LS-5 LS-5

690 V 690 V
DG1 DG2 DG3 DG4
TB2
easYgen easYgen easYgen easYgen
3400/3500 3400/3500 3400/3500 3400/3500

GB5 GB6
FB2 FB4

PTI / PTO

PTI / PTO
SG1 SG2

For Shipyard and Ship Owners easYgen


3400/3500
BT1
BT2 PM1
LS-5
PM2
BT3
BT4
easYgen
3400/3500

A diesel electric and shaft generator schematic


Meets your DP / DP3* DG: diesel generator // SG: shaft generator // BT: bow thruster // PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker
requirements

and engine control


Commissioning by a single
For Engine and Generator Set Suppliers
Woodward trained engineer
for the whole power plant Load sharing
Worldwide support network Same unit can be used for
• Europe, Middle East, and Africa a wide range of engines
• North, Central, and South America Application note available
• Russia, China, and India for engine integration with
• ASEAN and Oceania CAT ADEM, MAN SaCos,
The most experience in power MTU ADEC, …*
generation in the marine market CAN J1939 communication
Independent supplier with ECU
External engine-derating
function

*DP: Dynamic Positioning An example: MAN SaCoS | easYgen-3500 Marine

*See product specification 37533 on www.woodward.com for more information


www.woodward.com
Command Your easYgen™-3400/3500 Marine LS-511/521 Marine Remote Panel RP-3000 Marine
Complex Application FOR MARINE
APPlICATIONS The easYgen-3400/3500 Marine is an exceptionally versatile genset control and The LS-511/521 Marine is designed to enable complex power management applications The RP-3000 is a remote control and annunciation panel for use with the back-
protection package with all the flexibility and features needed to fit into a wide with multiple segments and bus breakers in combination with easYgen-3400/3500- panel-mounted easYgen-3400 Marine or door-mounted easYgen-3500 Marine
690 V MBB1
LS-5
MBB2 690 V
range of power generation applications. It allows the user to be centralized on a equipped genset controllers. The LS-5 devices manage synchronization, loading genset controls. It offers marine switchboard manufacturers an off-the-shelf HMI
TB1
single, afordable control for many uses – from stand-alone emergency generators and unloading on each bus segment, and send the required voltage and frequency option for remote control while retaining the look and feel of your easYgen devices.
to the isochronous parallel operation of up to 32 gensets. Common applications references via CAN bus to the easYgen-3400/3500 genset controllers. Wiring eforts
include load share module (LSM), LSM with synchronizer, and LSM with synchronizer are reduced to a minimum, since only one CAN bus connection is required between
GB1 GB2 FB1 TB3 TB4 FB3 GB3 GB4
LS-5 LS-5 LS-5 LS-5 LS-5

DG1 DG2
690 V 690 V
DG3 DG4 interacting with up to 16 external breaker controls (LS-5). Applications can be all LS-5 and easYgen-3400/3500 controllers. It can be used as a sync-check relay in RP-3000 Marine allows remote control, remote visualization (including a sync
TB2
scope), and password-protected remote coniguration of your easYgen marine
easYgen easYgen easYgen
3400/3500
easYgen
3400/3500
extended to genset control for providing auxiliary power or emergency power. stand-alone mode without easYgens. genset controllers, with access to its complete menu structure and all parameter
3400/3500 3400/3500

GB5 FB2 FB4 GB6 settings.


PTI / PTO

PTI / PTO
SG1 SG2

BT2 PM1 BT3


easYgen PM2 easYgen
BT1 LS-5 BT4
3400/3500 3400/3500
440 V 440 V
The easYgen-3400/3500 Marine is available in two mounting styles: The LS-5 Marine series is available in two mounting styles: The back-panel-
TB 440 V
LS-5 LS-5
The back-panel-mounted easYgen-3400 Marine has a rugged aluminum mounted LS-511 Marine with aluminum-powder-coated housing for use in Color display
chassis for use in harsh environments or conined spaces, while the lush- harsh environments or conined spaces.
mounted easYgen-3500 Marine has sealed soft keys and a large, easy-to-read The lush-mounted LS-521 Marine with sealed soft keys and a convenient, easy- Displays
LS-5 back-lit display. The integrated logicsManager links internal states and input to-read back-lit display door. • measurement values
230 V 230 V
signals with logical operators and time elements to implement complex control • alarms
TB 230 V
tasks. Furthermore, with connectivity to LS-5, it gives you control over circuit • system overview
A sophisticated diesel electric and shaft generator schematic breakers conigured in various structures. • event logger
DG: diesel generator // SG: shaft generator // BT: bow thruster // PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker Alarm acknowledged
Synchronizer and sync-check function
DE SC R I P TI O N
Supports manual breaker closing
This complex system taken from a real application ensures that one power source failure does not lead to total loss of Isochronous load sharing (up to 32) Conigurable breaker reclose timer
the network. Soft load/unload of generator Event logger
This application can be implemented with easYgen genset controllers in conjunction with LS-5 circuit breaker control Synchronizer and sync-check function Conigurable to work as a stand-alone unit
modules and remote panels (if need be). Multilingual HMI (Up to 11 languages)
The easYgens guide the generator and serve the generator circuit breaker while LS-5 units control feeder or tie- Load-dependent start/stop Eight conigurable LEDs in back panel variant
breakers. The remote panel connected to the easYgens helps remote visualization, control, and troubleshooting. for easy troubleshooting The Woodward service tool “ToolKit”
The modules may serve the PMS by providing the relevant data (e.g. breaker status, alarms, measurements, bus bar System overview display enables convenient commissioning
status, engine status, and much more). Event logger by the service engineer. Pages espe-
Modules communicate individually through CAN. And they provide CAN/RS485/RS232 communication interfaces for Support of up to 16 LS-5 cially designed for marine applications
the PMS system. The PMS fulills the supervisory function; monitoring, control and protection functions are fulilled by Capability for remote panel make analysis and trending easy.
easYgen and LS-5 modules. Advanced communication (CANopen, J1939)
The easYgen and LS-5 system is easily conigurable and does not require any expert intervention. Multilingual HMI (Up to 11 languages)

www.woodward.com
TM
easYgen Series

Command Your easYgen™-3400/3500 Marine ONE UNIT –


INFINITE OPPORTUNITIES LS-511/521 Marine Remote Panel RP-3000 Marine
Complex Application The easYgen-3400/3500 Marine is an exceptionally versatile genset control and The LS-511/521 Marine is designed to enable complex power management applications The RP-3000 is a remote control and annunciation panel for use with the back-
protection package with all the flexibility and features needed to fit into a wide with multiple segments and bus breakers in combination with easYgen-3400/3500- panel-mounted easYgen-3400 Marine or door-mounted easYgen-3500 Marine
range of power generation applications. It allows the user to be centralized on a equipped genset controllers. The LS-5 devices manage synchronization, loading genset controls. It offers marine switchboard manufacturers an off-the-shelf HMI
single, afordable control for many uses – from stand-alone emergency generators and unloading on each bus segment, and send the required voltage and frequency option for remote control while retaining the look and feel of your easYgen devices.
to the isochronous parallel operation of up to 32 gensets. Common applications references via CAN bus to the easYgen-3400/3500 genset controllers. Wiring eforts
include load share module (LSM), LSM with synchronizer, and LSM with synchronizer are reduced to a minimum, since only one CAN bus connection is required between
interacting with up to 16 external breaker controls (LS-5). Applications can be all LS-5 and easYgen-3400/3500 controllers. It can be used as a sync-check relay in RP-3000 Marine allows remote control, remote visualization (including a sync
scope), and password-protected remote coniguration of your easYgen marine
extended to genset control for providing auxiliary power or emergency power. stand-alone mode without easYgens. genset controllers, with access to its complete menu structure and all parameter
settings.

FLE XILI BI LI T Y

The easYgen-3400/3500 Marine is available in two mounting styles: Certiications and registrations The LS-5 Marine series is available in two mounting styles: The back-panel-
The back-panel-mounted easYgen-3400 Marine has a rugged aluminum CE, UL/cUL, CSA, GOST-R, mounted LS-511 Marine with aluminum-powder-coated housing for use in Color display
chassis for use in harsh environments or conined spaces, while the lush- ABS, BV, DNV, GL, LR harsh environments or conined spaces.
mounted easYgen-3500 Marine has sealed soft keys and a large, easy-to-read The lush-mounted LS-521 Marine with sealed soft keys and a convenient, easy- Displays
back-lit display. The integrated logicsManagerTM links internal states and input easYgen-3400/3500 Marine to-read back-lit display door. • measurement values
signals with logical operators and time elements to implement complex control For a wide range of applications – from • alarms
tasks. Furthermore, with connectivity to LS-5, it gives you control over circuit simple standby generators to parallel • system overview
breakers conigured in various structures. applications • event logger
PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker Alarm acknowledged
Synchronizer and sync-check function
OVE R VI E W O F FEAT UR ES
Supports manual breaker closing
This complex system taken from a real application ensures that one power source failure does not lead to total loss of Isochronous load sharing (up to 32) Conigurable breaker reclose timer
the network. Soft load/unload of generator Event logger
This application can be implemented with easYgen genset controllers in conjunction with LS-5 circuit breaker control Synchronizer and sync-check function Conigurable to work as a stand-alone unit
modules and remote panels (if need be). Conigurable monitoring Multilingual HMI (Up to 11 languages)
The easYgens guide the generator and serve the generator circuit breaker while LS-5 units control feeder or tie- Load-dependent start/stop Eight conigurable LEDs in back panel variant
breakers. The remote panel connected to the easYgens helps remote visualization, control, and troubleshooting. True RMS measurement for easy troubleshooting The Woodward service tool “ToolKit”
The modules may serve the PMS by providing the relevant data (e.g. breaker status, alarms, measurements, bus bar System overview display enables convenient commissioning
status, engine status, and much more). Event logger by the service engineer. Pages espe-
Modules communicate individually through CAN. And they provide CAN/RS485/RS232 communication interfaces for Support of up to 16 LS-5 cially designed for marine applications
the PMS system. The PMS fulills the supervisory function; monitoring, control and protection functions are fulilled by Capability for remote panel make analysis and trending easy.
easYgen and LS-5 modules. Advanced communication (CANopen, J1939)
The easYgen and LS-5 system is easily conigurable and does not require any expert intervention. Multilingual HMI (Up to 11 languages)

easYgen-3400 Marine | easYgen–3500 Marine

www.woodward.com
LS-5 Series

Command Your easYgen™-3400/3500 Marine LS-511/521 Marine IMPROvING


SYSTEM EFFICIENCY Remote Panel RP-3000 Marine
Complex Application The easYgen-3400/3500 Marine is an exceptionally versatile genset control and The LS-511/521 Marine is designed to enable complex power management applications The RP-3000 is a remote control and annunciation panel for use with the back-
protection package with all the flexibility and features needed to fit into a wide with multiple segments and bus breakers in combination with easYgen-3400/3500- panel-mounted easYgen-3400 Marine or door-mounted easYgen-3500 Marine
range of power generation applications. It allows the user to be centralized on a equipped genset controllers. The LS-5 devices manage synchronization, loading genset controls. It offers marine switchboard manufacturers an off-the-shelf HMI
single, afordable control for many uses – from stand-alone emergency generators and unloading on each bus segment, and send the required voltage and frequency option for remote control while retaining the look and feel of your easYgen devices.
to the isochronous parallel operation of up to 32 gensets. Common applications references via CAN bus to the easYgen-3400/3500 genset controllers. Wiring eforts
include load share module (LSM), LSM with synchronizer, and LSM with synchronizer are reduced to a minimum, since only one CAN bus connection is required between
interacting with up to 16 external breaker controls (LS-5). Applications can be all LS-5 and easYgen-3400/3500 controllers. It can be used as a sync-check relay in RP-3000 Marine allows remote control, remote visualization (including a sync
scope), and password-protected remote coniguration of your easYgen marine
extended to genset control for providing auxiliary power or emergency power. stand-alone mode without easYgens. genset controllers, with access to its complete menu structure and all parameter
settings.

EXPA N DAB ILIT Y

The easYgen-3400/3500 Marine is available in two mounting styles: The LS-5 Marine series is available in two mounting styles: The back-panel- Certiications and registrations
The back-panel-mounted easYgen-3400 Marine has a rugged aluminum mounted LS-511 Marine with aluminum-powder-coated housing for use in CE, UL/cUL, CSA, ABS, BV, DNV, GL, LR Color display
chassis for use in harsh environments or conined spaces, while the lush- harsh environments or conined spaces.
mounted easYgen-3500 Marine has sealed soft keys and a large, easy-to-read The lush-mounted LS-521 Marine with sealed soft keys and a convenient, easy- LS5 Marine Displays
back-lit display. The integrated logicsManager links internal states and input to-read back-lit display door. The breaker synchronizer and • measurement values
signals with logical operators and time elements to implement complex control controller for optimum wiring • alarms
tasks. Furthermore, with connectivity to LS-5, it gives you control over circuit • system overview
breakers conigured in various structures. OVER VIE W O F FE ATURES • event logger
PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker Alarm acknowledged
Synchronizer and sync-check function
Automatic segment control
Supports manual breaker closing
This complex system taken from a real application ensures that one power source failure does not lead to total loss of Isochronous load sharing (up to 32) Conigurable breaker reclose timer
the network. Soft load/unload of generator Event logger
This application can be implemented with easYgen genset controllers in conjunction with LS-5 circuit breaker control Synchronizer and sync-check function Conigurable to work as a stand-alone unit
modules and remote panels (if need be). Multilingual HMI (Up to 11 languages)
The easYgens guide the generator and serve the generator circuit breaker while LS-5 units control feeder or tie- Load-dependent start/stop Eight conigurable LEDs in back panel variant
breakers. The remote panel connected to the easYgens helps remote visualization, control, and troubleshooting. for easy troubleshooting The Woodward service tool “ToolKit”
The modules may serve the PMS by providing the relevant data (e.g. breaker status, alarms, measurements, bus bar System overview display enables convenient commissioning
status, engine status, and much more). Event logger by the service engineer. Pages espe-
Modules communicate individually through CAN. And they provide CAN/RS485/RS232 communication interfaces for Support of up to 16 LS-5 cially designed for marine applications
the PMS system. The PMS fulills the supervisory function; monitoring, control and protection functions are fulilled by Capability for remote panel make analysis and trending easy.
easYgen and LS-5 modules. Advanced communication (CANopen, J1939)
The easYgen and LS-5 system is easily conigurable and does not require any expert intervention. Multilingual HMI (Up to 11 languages)

LS-511 Marine | LS-521 Marine

www.woodward.com
Command Your easYgen™-3400/3500 Marine LS-511/521 Marine Remote Panel RP-3000 Marine CONTROllING
REMOTElY

Complex Application The easYgen-3400/3500 Marine is an exceptionally versatile genset control and The LS-511/521 Marine is designed to enable complex power management applications The RP-3000 is a remote control and annunciation panel for use with the back-
protection package with all the flexibility and features needed to fit into a wide with multiple segments and bus breakers in combination with easYgen-3400/3500- panel-mounted easYgen-3400 Marine or door-mounted easYgen-3500 Marine
range of power generation applications. It allows the user to be centralized on a equipped genset controllers. The LS-5 devices manage synchronization, loading genset controls. It offers marine switchboard manufacturers an off-the-shelf HMI
single, afordable control for many uses – from stand-alone emergency generators and unloading on each bus segment, and send the required voltage and frequency option for remote control while retaining the look and feel of your easYgen devices.
to the isochronous parallel operation of up to 32 gensets. Common applications references via CAN bus to the easYgen-3400/3500 genset controllers. Wiring eforts
include load share module (LSM), LSM with synchronizer, and LSM with synchronizer are reduced to a minimum, since only one CAN bus connection is required between
interacting with up to 16 external breaker controls (LS-5). Applications can be all LS-5 and easYgen-3400/3500 controllers. It can be used as a sync-check relay in RP-3000 Marine allows remote control, remote visualization (including a sync Certiications and registrations
scope), and password-protected remote coniguration of your easYgen marine CE, UL/cUL, ABS, BV, DNV, GL, LR
extended to genset control for providing auxiliary power or emergency power. stand-alone mode without easYgens. genset controllers, with access to its complete menu structure and all parameter
settings.
RP-3000 Marine
Remote annunciation and
OVER VIE W OF FEATURES control of the easYgen
The easYgen-3400/3500 Marine is available in two mounting styles: The LS-5 Marine series is available in two mounting styles: The back-panel-
The back-panel-mounted easYgen-3400 Marine has a rugged aluminum mounted LS-511 Marine with aluminum-powder-coated housing for use in Color display
chassis for use in harsh environments or conined spaces, while the lush- harsh environments or conined spaces. Multilingual
mounted easYgen-3500 Marine has sealed soft keys and a large, easy-to-read The lush-mounted LS-521 Marine with sealed soft keys and a convenient, easy- Displays G2 G
G1 3
back-lit display. The integrated logicsManager links internal states and input to-read back-lit display door. • measurement values

easYgen™-3400

G4
OF
signals with logical operators and time elements to implement complex control • alarms
tasks. Furthermore, with connectivity to LS-5, it gives you control over circuit • system overview
breakers conigured in various structures. • event logger
PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker Alarm acknowledged
Synchronizer and sync-check function Coniguration of easYgen RP-3000
Annunciate one or multiple easYgens
Supports manual breaker closing
This complex system taken from a real application ensures that one power source failure does not lead to total loss of Isochronous load sharing (up to 32) Conigurable breaker reclose timer easYgen-3400 Marine | Selector switch | RP-3000 Marine
the network. Soft load/unload of generator Event logger
This application can be implemented with easYgen genset controllers in conjunction with LS-5 circuit breaker control
modules and remote panels (if need be).
The easYgens guide the generator and serve the generator circuit breaker while LS-5 units control feeder or tie-
Synchronizer and sync-check function

Load-dependent start/stop
Conigurable to work as a stand-alone unit
Multilingual HMI (Up to 11 languages)
Eight conigurable LEDs in back panel variant
ToolKit™
breakers. The remote panel connected to the easYgens helps remote visualization, control, and troubleshooting. for easy troubleshooting The Woodward service tool “ToolKit”
The modules may serve the PMS by providing the relevant data (e.g. breaker status, alarms, measurements, bus bar System overview display enables convenient commissioning
status, engine status, and much more). Event logger by the service engineer. Pages espe-
Modules communicate individually through CAN. And they provide CAN/RS485/RS232 communication interfaces for Support of up to 16 LS-5 cially designed for marine applications
the PMS system. The PMS fulills the supervisory function; monitoring, control and protection functions are fulilled by Capability for remote panel make analysis and trending easy.
easYgen and LS-5 modules. Advanced communication (CANopen, J1939)
The easYgen and LS-5 system is easily conigurable and does not require any expert intervention. Multilingual HMI (Up to 11 languages) Trending page Load share System overview page
configuration page

www.woodward.com
Your Beneits ONE SOlUTION
INFINITE POSSIBIlITIES

For Switchgear Builders For Power Management System Designers


Minimum wiring Load control strategy by PMS to easYgen
One unit for multiple purposes Start/stop command by PMS through easYgen communication link or automatic start/stop based on load demand
• Synchronization Communication with LS-5 for complex network segmentation with feeder/tie breakers
• Start/stop One communication link between PMS and generator set for all engine and generator information leading to less
• Engine and generator monitoring components for the power plant. The easYgens share operating variables with the PMS including:
• One set of PTs and CTs for multiple purposes • breaker status
• Breaker status monitoring • active and reactive power, power factor
Local/remote control • voltage, current, and frequency on all three phases
Front mounting or back panel mounting with remote • Engine sensor values like oil pressure, coolant temperature (via CAN J1939)
display available
CAN and ModBus communication link
• Supports Woodward or third-party I/O extensions
• Supports Woodward or third-party displays

A typical installation

For Shipyard and Ship Owners


Meets your DP2 / DP3* PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker
requirements
Single supplier for generator
and engine control
Commissioning by a single
For Engine and Generator Set Suppliers
Woodward trained engineer
for the whole power plant Load sharing
Worldwide support network Same unit can be used for
• Europe, Middle East, and Africa a wide range of engines
• North, Central, and South America Application note available
• Russia, China, and India for engine integration with
• ASEAN and Oceania CAT ADEM, MAN SaCos,
The most experience in power MTU ADEC, …*
generation in the marine market CAN J1939 communication
Independent supplier with ECU
External engine-derating

easYgen-3500 | LS-5 | UG-25+


*DP: Dynamic Positioning

www.woodward.com
For Switchgear Builders FU R THE R IN FOR MATI O N
For Power Management System Designers
Please visit www.woodward.com or contact us for further product-related
information. Load control strategy by PMS to easYgen
Start/stop command by PMS through easYgen communication link or automatic start/stop based on load demand
• Synchronization Communication with LS-5 for complex network segmentation with feeder/tie breakers
Description Speciication Manual
• Start/stop One communication link between PMS and generator set for all engine and generator information leading to less
• Engine and generator monitoring easYgen-3400/3500 Marine 37533 37531 components for the power plant. The easYgens share operating variables with the PMS including:
• One set of PTs and CTs for multiple purposes • breaker status
• Breaker status monitoring LS-511/521 Marine 37545 37542 • active and reactive power, power factor
Local/remote control • voltage, current, and frequency on all three phases
RP-3000 37446 37534
Front mounting or back panel mounting with remote • Engine sensor values like oil pressure, coolant temperature (via CAN J1939)
display available
CAN and ModBus communication link
• Supports Woodward or third-party I/O extensions
• Supports Woodward or third-party displays

For Shipyard and Ship Owners


CONTACT
Meets your DP / DP3* PM: mains propulsion // TB: tie breaker // FB: feeder breaker // GB: generator breaker
requirements Region Telephone E-mail
North and Central America +1 970 962 7331 [email protected]
and engine control
Commissioning by a single
South America
Europe
+55 193708 4800
+49 711 789 54 510
[email protected]
[email protected]
For Engine and Generator Set Suppliers
Woodward trained engineer Middle East and Africa +971 2 6275185 [email protected]
for the whole power plant Russia +7 812 319 3007 [email protected] Load sharing
Worldwide support network China +86 512 8818 5515 [email protected] Same unit can be used for
• Europe, Middle East, and Africa India +91 124 4399 500 [email protected] a wide range of engines
• North, Central, and South America ASEAN and Oceania +49 711 789 54 510 [email protected] Application note available
• Russia, China, and India for engine integration with
• ASEAN and Oceania CAT ADEM, MAN SaCos,
The most experience in power MTU ADEC, …*
generation in the marine market DISTRIBUTORS AND SERVICE For further information please contact: CAN J1939 communication
Independent supplier with ECU
Woodward has an international Peaker Services, Inc. External engine-derating
network of distributors and service 8080 Kensington Ct.
facilities. For your nearest represen- Brighton, MI 48116
*DP: Dynamic Positioning tative, call a number above or see the
800-622-4224
details in the adjacent box.

51458B
www.woodward.com

You might also like