NPN Darlington Transistor: Absolute Maximum Ratings

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

NPN Darlington Transistor

Pin Configuration:
1. Collector
2. Base
3. Emitter

Absolute Maximum Ratings

Parameters Symbol Value Units

Collector Emitter Voltage VCES


30
Collector Base Voltage VCBO V

Emitter Base Voltage VEBO 10

Collector Current Continuous IC 500 mA


Power Dissipation at Ta = 25°C 625 mW
Derate Above 25°C 5 mW/°C
PD
Power Dissipation at TC = 25°C 1.5 W
Derate Above 25°C 12 mW/°C
Operating and Storage Junction Temperature
Tj, Tstg -55 to +150 °C
Range
Thermal Resistance

Junction to Ambient Rth (j-a) 200


°C/W
Junction to Case Rth (j-c) 83.3

Electrical Characteristics (Ta = 25°C unless otherwise specified)

Parameters Symbol Test Condition Min. Max. Units

Collector Emitter Voltage VCES IC = 100μA, IB = 0 30 - V

Collector Cut off Current ICBO VCB = 30V, IE = 0 -


100 nA
Emitter Cut off Current IEBO VEB = 10V, IC = 0 -

Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro

Page <1> 18/09/19 V1.0


NPN Darlington Transistor

Electrical Characteristics (Ta = 25°C unless otherwise specified)

Parameters Symbol Test Condition Min. Max. Units


IC = 10mA, VCE = 5V 10
DC Current Gain hFE - -
IC = 100mA, VCE = 5V 20
Collector Emitter Saturation
VCE (sat)* IC = 100mA, IB = 0.1mA - 1.5
Voltage
V
Base Emitter On Voltage VBE (on)* IC = 100mA, VCE = 5V - 2

Dynamic Characteristics
Current Gain-Bandwidth IC = 10mA, VCE = 5V
fT** 125 - MHz
Product f = 100MHz

*Pulse Test : Pulse Width = 300μs, Duty Cycle = 2%


**ft = |hfe| •ftest.

Dimensions Minimum Maximum

A 4.32 5.33

B 4.45 5.2

C 3.18 4.19

D 0.41 0.55

E 0.35 0.5

F 5°

G 1.4
1.14
H 1.53

K 12.7 -

Dimensions : Millimetres

Pin Configuration:
1. Collector Part Number Table
2. Base Description Part Number
3. Emitter Darlington Transistor, TO-92 MPSA14

Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for
the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness,
any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make
any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or
where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its
negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.

Newark.com/multicomp-pro
Farnell.com/multicomp-pro
Element14.com/multicomp-pro

Page <2> 18/09/19 V1.0

You might also like