100% found this document useful (1 vote)
1K views1 page

IMEI Repair

This document provides instructions for changing the IMEI numbers on an Android phone using engineering mode. It describes entering engineering mode, going to the connectivity tab and radio information, and sending AT commands to write new IMEI numbers to Phone1 and Phone2, rebooting the phone, and verifying the new IMEI numbers.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
1K views1 page

IMEI Repair

This document provides instructions for changing the IMEI numbers on an Android phone using engineering mode. It describes entering engineering mode, going to the connectivity tab and radio information, and sending AT commands to write new IMEI numbers to Phone1 and Phone2, rebooting the phone, and verifying the new IMEI numbers.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 1

Go to Engineer Mode and Select Engineer mode (MTK)

4. Go to Connectivity Tab and Select CDS information


5. Select Radio Information after that Select Phone1 (for the first IMEI)
6. At the top there is a command line which begins �AT+� just type there �AT
+EGMR=1,7,�IMEI_1? (Put your first IMEI number number)
7. Hit send command and you will / may get a confirmation that "sent to mSend".
8. Now go back and select �Phone2? (for the second IMEI number)
9. At the top there is a command line which begins �AT+� just type there �AT
+EGMR=1,10,�IMEI_2? (Put your second IMEI number)
10. Reboot your phone and check you IMEI number (Dial *#06#).
Must Read :- Latest Google play store for any Android device
lost-IMEI-Numbers
Must Read :- TheftSpy Anti-Theft app for Micromax A110 and other Android mobile
Second Method: -
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT
+EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second
IMEI No)
12. Hit send command
13. Reboot your phone

You might also like