6013840a en FDS 3271 PT VIBSCANNER 2 - Ds

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

TECHNICAL DATA

VIBSCANNER® 2
The next-gen high-speed vibration data collector

Tips for increasing machine life:


In a nutshell, machine vibration out of tolerances means
a reduced machine lifecycle. To help extend asset health,
heed these tips while using the VIBSCANNER 2:

• Measure machine vibration regularly to review the


Boost efficiency and data quality with the health of your assets.
VIBSCANNER 2 • Adapt a maintenance schedule to the unique needs of
the asset and avoid unnecessary costs.
VIBSCANNER 2 is the ultimate tool for fast and accurate • Spend less on spare parts and reduce unexpected
machine vibration measurements. This high-speed data downtime.
collector heightens efficiency and data quality, and, in just • Extend the life of parts such as bearings, couplings,
a quarter of the time of a standard tool, precisely measures sealings, etc.
available data in three axes. Equipped with a triaxial • Save on labor costs and increase worker safety with
sensor, VIBSCANNER 2 requires only one measurement fewer work orders.
point. Then, with just the click of a button, it begins
collecting machine data.
The “Triax-Effect”
Even untrained personnel can effectively use this tool to VIBSCANNER 2 minimizes the problem of finding the right
collect machine data. RFID technology inside VIBSCANNER measurement points on a machine. With the PRUFTECHNIK
2, plus RFID hangtags on the assets, make it easy to find triaxial sensor, just one measurement point is required
the right measurement point. It displays on the system’s instead of three different ones. This “Triax-Effect” enables
bright touchscreen. An intuitively guided user interface the VIBSCANNER 2 to save up to four times the amount of
helps users avoid becoming the cause of measurement measurement time compared to industry-standard tools
errors. With just a single button to activate and obtain while increasing data quality.
measurements, handling is smart and secure.

You can utilize the integrated stroboscope to determine the


exact rotation speed of your asset.

Key benefits of the VIBSCANNER 2

• Quick, accurate measurements


This system delivers measurements up to four times
faster than the industry standard.

• Easy to use
Users get a highly intuitive user interface with a simple
push of a button to collect machine data.

• Speedfinder
You can always save the exact rotation speed from
variable speed machines with your vibration data.
Speed: the root cause of all fault patterns
A unique speedfinder tool is an exclusive feature of the
VIBSCANNER 2 (and VIBSCANNER 2 EX). This tool directly
evaluates the exact rotational speed of any machine from
the raw measurement data. The rotational speed is crucial
to determining fault patterns, particularly when operating
on assets with variable rotational speeds. With the speed-
finder tool, no additional measurements are necessary.
Time is saved on-site, and the vibration analysis specialist
has all available data in a single set.

Stay on track with RFID


After installing the on-site route on the handheld computer,
RFID tags on the assets will help tool users quickly locate
the right machine and its predefined measurement points.
All information from the RFID hangtag is displayed on the
screen. Just deploy the triaxial sensor in the right direction,
as illustrated on the sensor housing, and push the button to
begin collecting machine data.

Let the experts do the rest


Once the on-site route is finished, all machine data easily
can be transferred from the handheld device to a PC via
USB connection. However, machine data analysis is a job
best suited for experts only. PRUFTECHNIK not only trains
these specialists worldwide but also offers services to read
and analyze machine data and provide advice on how to
proceed regarding specific issues. PRUFTECHNIK provides
global machine vibration experience by using the knowl-
edge and know-how of its ISO CAT I-IV specialists.

Here’s how to keep it simple: You measure and have


PRUFTECHNIK evaluate your data.

2 Fluke Reliability VIBSCANNER 2


VIBSCANNER 2
General specifications General specifications
Measurement Number 3 synchronous analog channels (X/Y/Z) Environment Connections Socket for power adapter
Channels / mechanical Micro USB for data cable
system Plug-in connector (8-pole) for signal cable
Z channel -20 .. +20 V, input impedance: 78 kOhm
(0 ... 50 kHz) IEPE Housing, non- 2-component housing: PC and ABS
Current Linedrive EX device Sheath: TPE, black
X/Y channel -20 .. +20 V, input impedance: 78 kOhm Housing, EX Housing: PC
(0 ... 10 kHz) IEPE device Sheath: TPE, black, antistatic, conductive
Dynamic 109.5 dB (total) Dimensions 203 x 143 x 76mm (LxWxH) (8 x 5 5/8 x 3”)
range
Weight approx. 1.0 kg (35.3 oz)
Sampling rate up to 131 kHz per channel
Degree of IP55
Signal 3 x 24 bit ADCs protection
processing
Temperature Operation: -10 °C ... +50 °C [ 14 °F ...122 °F ];
Measuring Vibration acceleration: dependent on used sensor range EX device operation: 0°C ... +50°C [ 32 °F ...122 °F ]
range / Accuracy Shock pulse: -10 dBsv to 80 dBsv +/- 2 dBsv Storage: -20 °C ... +60 °C [-4 °F ... +140 °F ]
Fulfilled DIN ISO 2954:2012 (2-1 kHz, 10 Hz -1 kHz, 10-10 KHz) Air humidity 0 ... 90 %, non-condensing
standard
Certifications CE, RoHS, FCC, FCC/IC; EX device: CE, RoHS, FCC, FCC/
Display Type Capacitive touchscreen IC, ATEX, IECEx,
Optically bonded for high contrast and increased shock NEC 500/505, CEC Annex J18, CEC sect. 18
resistance
Active area 95 x 54 mm (3 3/4” x 2 1/8”)
Size 10.9 cm (4 1/3“)
Color depth 16 million colors
Viewing < 140°
angle
Operation Multi touch – gesture control
Glove-compatible
Illumination Background lighting, adjustable
Ambient light Yes
sensor
Supply Type Li ion rechargeable battery
Nominal 7.2 V (Ex device: 7.3V)
voltage
Energy density 72 Wh (Ex device: 50 Wh)
Charge time, 5.0 h (0 ... 100 % @ 25 °C / 77 °F); Ex device: 3.5 h
typical 3.5 h (0 ... 80 % @ 25 °C / 77 °F); Ex device: 2.5 h
Charging 10 °C ... 40 °C
temperature [ 50 °F ... 104 °F]
Operating 12 h (cont. operation, rech. battery 100 %); Ex device: 10h
time, typical 6 h (cont. operation, rech. battery 50 %); Ex device: 5h
Power adapter 100-240 V~, 50-60 Hz (input)
12 V 3 A (output)
Energy saving Yes
mode
Computer Processor ARM A9 - Quadcore 1 GHz
Operating Touchscreen, ON/OFF key, Enter key
elements
Memory microSD card, 32 GB for measurement data, permanently
installed
2 GB RAM
USB 1 x USB 2.0, device interface
RFID RFID reader module for PRÜFTECHNIK transponder
- ALI 50.628-25; EX device: ALI 50.628 EX0-25
Complies with ISO 14443a and ISO 15693
Reading distance: 2...3 cm (13/16” ... 1 3/16”)
WiFi IEEE 802.11a/b/g/n/ac
Throughput: < 200 Mbps
Security: WPA2
Stroboscope Frequency range: 0.1 – 1000 Hz
Resolution: 0.06 1/min.
LEDs: Risk group 1 per IEC 62471
LED 1x RGB LED (display for battery status and charging
process)

Fluke Deutschland GmbH


Oskar-Messter-Str. 19-21
85737 Ismaning, Germany
Phone: +49 89 99616 - 0
www.pruftechnik.com

©2020 Fluke Corporation


Specifications subject to change without notice.
10/2020 6013840a-en

Reproduction and modification of this document is not


permitted without written permission from Fluke Corporation.

3 Fluke Reliability VIBSCANNER 2

You might also like