Pipe, Weld, and

Adapter Fittings

TruFit® & TruFit10K®

Instrumentation Fittings
 1/16 to 2 in. sizes  316 SS, Alloy 400, Alloy C-276,
carbon steel, and brass

 NPT, BSP, and SAE threads  AN 37° Flared

 Tube and Pipe Socket
and Butt Weld
www.mySSP.com
At SSP, we are proud to be an American manufacturing success story.
100% of our products are made in America. All of our manufacturing is performed
in our 165,000 sq. ft. facility located near Cleveland, Ohio. Our facility is the
largest vertically integrated, single-site operation in the industry. In addition
to manufacturing and assembly, we have closed die forging, tool & die design,
product engineering and testing operations under the same roof with customer
service and management.
Made in America is good business. Not only do we make everything in America,
we use American suppliers too. Buying American allows us to have better quality
control and a more reliable supply chain. We can work more closely within our
walls and with our suppliers to improve quality, reduce costs, and shorten lead
times, which means faster service and better products for you.
Support where it counts. SSP products and services are supported by more than
4000 people and 350 distributor locations around the globe. For a distributor
near you, contact SSP Customer Service or visit
www.mySSP.com/distributors.

Industry Standard Products.

Made Better.
 TABLE of CONTENTS
Introduction .............................................. 3 NPT Thread Fittings ............................... 12

Technical Information .............................. 4 SAE Fittings & Adapters ........................ 25

Safety......................................................... 6 Weld Fittings and Adapters.................... 28

How to Order............................................. 8 AN Flared Fittings & Adapters.................33

Selection Guide......................................... 9 ISO / BSP Fittings & Adapters.................37

Instrumentation Pipe Fittings

TruFit® Pipe, Weld & Adapter Fittings
SSP has been manufacturing pipe fittings for more than 75 years. TruFit instrumentation pipe fittings are
manufactured with high-quality NPT, BSP, and SAE threads, AN 37° flared, and tube and pipe weld ends. Straight, elbow,
tee and cross fittings can be configured with end connections from 1/16 to 2 in. TruFit pipe fittings are available in 316
stainless steel, Alloy 400, Alloy C-276 and brass. Other alloys are available on request.
03
TruFit10K® Fittings
SSP also offers TruFit10K fittings. Each fitting has a pressure rating of at least 10,000 psig (689 bar). They are
available in 316 stainless steel in sizes from 1/16 to 1 in. NPT with BSP, SAE and AN end connections.

Product Design
Male threads are capped Clear identification enable material
for protection heat and lot traceability.

Smooth thread flanks

Burr-free
promote sealing and
internal surfaces
minimize galling.

NPT threads conform

Precision forging supports to ASME 1.20.1 and
Tightly controlled metal chemistry
accurate pipe layouts. SAE AS71051.
for increased strength and
www.mySSP.com

corrosion resistance.
 Technical Information
TruFit Pipe and Weld Fitting Applications

Parameter Tapered Thread Straight Thread Weld Ends

Pressures High to 10,000 psi High to 10,000 psi Very High to 15000 psig
(ASME 31.1) Static systems only Dynamic and Static Static and Dynamic

Stainless: -425° to 1200°F Nitrile: -30° to 250°F

Temperatures Brass: -40 to 400°F FKM: -15° to 400°F Stainless: -425 to 1200°F
Alloy 400: -65 to 800°F Copper: -315 to 400

Vibration Resistance Fair Very Good Excellent

Sizes 1/16 to 2 in. #4 to #32 1/8 to 2 in.

Excellent in static systems. Excellent.

Dynamic Good in static systems
Very good in Permanent joints. Highly resistant to
Temperature/Pressure Poor in dynamic systems
dynamic systems vibration

Limited breaks and remakes due to metal Very good. Virtually unlimited remakes.
Easy of Maintenance Permanently assembled
deformation of threads O-ring replacement only

TruFit 10K Application Information

Parameter Tapered Thread Straight Thread

Pressures 10,000 psi minimum 10,000 psi minimum

(ASME 31.1) Static systems only Dynamic and Static Systems
Nitrile: -30° to 250°F
Temperature Range Stainless: -425° to 1200°F
FKM: -15° to 400°F
Vibration Resistance Fair Very Good
Size availability 1/8 to 1 in. #4 - #16
Dynamic Good in static systems Excellent in static systems.
Temperature/Pressure Poor in dynamic systems Very good in dynamic systems
Limited breaks and remakes due to metal Very good. Virtually unlimited remakes. O-ring
Maintenance
deformation of threads replacement only

Thread Standards Material Standards

Type Designator Standard Material Bar Forging
ASTM A276, ASME SA479, ASTM A182, ASME SA182,
NPT (Tapered) _ ASME B1.20.1 316 SS
EN 1.4401 EN 1.4401

ISO/BSP (parallel) Alloy 400 ASTM B164 ASTM B564, ASME SB564
RS ISO 228, JIS B0202
(Based on DIN 3852) Alloy C-276 ASTM B574 ASTM B564
ISO/BSP (tapered) ISO 7, BS EN 10226-1, Brass ASTM B16, ASTM B453 ASTM B283
RT
(Based on DIN 3852) JIS B0203
Carbon Steel ASTM A108 —
Unified (SAE) ST ASME B1.1 Alloy 20 ASTM B473 ASTM B462
Alloy 600 ASTM B166, ASME SB166 ASTM B564, ASME SB564
Alloy 625 ASTM B446➂ ASTM B564, ASME SB564➃
Alloy 825 ASTM B425 ASTM B564, ASME SB564

04
Pressure - Temperature Ratings
Tables 1 contains typical pressure ratings for male and female NPT and BSP tapered pipe thread ends at ambient temperature. Table 2 provides pressure
ratings for SAE and BSP straight pipe thread ends. Table 4 contains derating factors for determining pressure ratings for tapered fittings at higher tempera-
tures. Table 5 lists temperature ranges for FKM and nitrile O-ring sealed ends. For more more information about pressure ratings, contact
SSP customer service.

Table 1, SSP NPT/BSPT Pipe End Pressure Ratings, ANSI/ASME B 31.3

Technical Information
316 SS Brass Carbon Steel
Male Female Male Female Male Female
NPT/ISO
Size
Pipe Size psig bar psig bar psig bar psig bar psig bar psig bar

1/16" 1 11,050 760 6,750 460 5,550 380 3,350 230 11,050 760 6,750 460
1/8" 2 10,050 690 6,550 450 5,050 350 3,250 220 10,050 690 6,550 450
1/4" 4 8,050 550 6,650 460 4,050 280 3,350 230 8,050 550 6,650 460
3/8" 6 7,850 540 5,350 370 3,950 270 2,650 180 7,850 540 5,350 370
1/2" 8 7,750 530 4,950 340 3,850 260 2,450 170 7,750 530 4,950 340
3/4" 12 7,350 510 4,650 320 3,650 250 2,350 160 7,350 510 4,650 320
1" 16 5,350 370 4,450 310 2,650 180 2,250 150 5,350 370 4,450 310

Reference: MPa = 0.10 x psig To obtain ANSI/ASME B 31.1 values, multiply ANSI/ASME B 31.3 values by .94.

Table 2, Parallel Threads, SAE/BSPP, 316 SS Table 3, Material Allowable Stress Values

Male Female Material Value

Size psig bar psig bar 316 SS 20,000 psi (1378 bar)

1/8 6,000 413 5,400 380 Brass 10,000 psi (689 bar)

1/4 6,000 413 5,400 373 Carbon Steel 20,000 psi (1378 bar)

3/8 6,000 413 5,400 373

1/2 6,000 413 4,800 331

05
3/4 4,800 331 4,200 290

1 3,600 248 2,400 166

1 1/4 3,000 206 2,000 138

1 1/2 2,400 166 1,800 124

2 1,800 124 1,500 104

Temperature Ratings
.
To determine the maximum allowable working pressure for the piping systems at elevated temperatures, multiply the applicable maximum allowable work-
ing pressure by the corresponding temperature stress factor from Table 4. System temperatures may be limited by the thread sealant or when applicable,
the gasket or O-ring materials. See Table 6 for O-ring materials temperature ratings.

Table 4, Stress Factors for Determining Pressure Ratings at Table 5, Temperature Ratings
Elevated Temperatures Ratings, ANSI/ASME B 31.3
Material Max. Temperature
Temperature Stainless Steel Carbon
Copper Alloy 400
°F °C 304SS 316SS Steel 316 SS 1,200 (649)

100 38 1.00 1.00 1.00 1.00 1.00 Brass 400 (204)

200 93 1.00 1.00 0.96 0.80 0.88 Carbon Steel 375 (190)
300 149 1.00 1.00 0.901 0.78 0.82
400 204 0.94 0.97 0.861 0.50 0.79
www.mySSP.com

500 260 0.88 0.90 - - 0.79

Table 6, O-Ring Materials
600 316 0.82 0.85 - - 0.79
Temperature Ratings
700 371 0.80 0.82 - - 0.79
800 427 0.76 0.80 - - 0.76 Temperature Range
Material
°F (°C)
900 482 0.73 0.78 - - 0.43
FKM -15 to 400 (-26 to 204)
1000 538 0.69 0.73 - - -
1200 649 0.30 0.37 - - - Nitrile -30 to 250 (-34 to 121)
1
Temperature limitation of Zinc coating (375°F) used on carbon steel fittings.
 Safety
Important
To help ensure the safe and reliable performance of TruFit products, complete system design must be considered
prior to installation of the pipe, tubing and fittings. Determining the design compatibility of materials, media, flow,
temperatures and pressures; as well as implementing proper installation, operation and maintenance of the system
are the responsibilities of the systems’ owner, designers and users.

Safety Reminders
All SSP products are designed and manufactured with safety in mind. The following is a limited list of general
safety tips as reminders for good safety practices:
• Do not install, tighten or loosen a fitting or adapter while the system is under pressure.
• Do not loosen a fitting, nut or plug to relieve or bleed pressure.
• Always use a back-up wrench to hold the pipe or pipe fitting body steady when tightening or loosening.
• Use proper thread lubricants and sealants on tapered pipe fittings.
• Tube fitting end connection and tubing material should be similar (stainless steel fittings on stainless steel
pipe, brass fittings on copper tubing, with the tubing materials being fully annealed).
• Do not weld tube fittings that are assembled. Prior to welding, remove all components, nuts, ferrules, and
seals. Protect the sealing and thread areas of the tube fitting by covering with a plug or another nut.

06
How to Order

Technical Inforation
The Trufit Pipe Fittings Catalog contains part numbers for the most common fitting types and sizes. Other
configurations are available. To request other configurations, use the guides on pages 7 and 8 to build a part
number or contact SSP customer service.

NPT Thread
Material Brand 1st End Size Fitting Type 2nd End Size Options

ISS T 4 RA 2 -10K
Material Fitting Type
Designator Material Designator Description Designator Description
IB Brass A Adapter ME Male Elbow
ISS 316 Stainless Steel BT Branch Tee MT Male Tee
IS Carbon Steel CN Close Nipple PCP Pipe Cap
IM Alloy 400/R405 E Female Elbow PP Pipe Plug
IHC Alloy C-276 E45 45° Female Elbow PT Pipe Tee

HCG Hex Coupling RA Reducer/Adapter

Nominal End Connection Size

HCRG

HHP
Hex Reducing Coupling

Hollow Hex Plug

RB

SE
Reducing Bushing

Street Elbow
07
Designator Size HLN Hex Long Nipple RSE Reducing Street Elbow
1 1/16
HN Hex Nipple SE45 45° Street Elbow
2 1/8
HRN Hex Reducing Nipple ST Street Tee
4 1/4
MD Mud Dauber (Vent Protector)
6 3/8
8 1/2
Options
12 3/4

How to Order
Designator Option
16 1
20 1 1/4 -10K 10K Fittings

24 1 1/2 -XP98 Per ASTM G93 Level C

32 2 -XP97 No Lube

www.mySSP.com
 How to Order
Weld & Braze Fittings
Tube Weld, Pipe Weld Fittings and Adapters

Material Brand 1st End Size 1st Fitting Type 2nd End Size Options

ISS T 6 TSFC 4
Nominal Size Material Fitting Type

Designator Material Part Description

Designator Size
Male Pipe Weld x Tube
2 1/8 ISS 316 Stainless Steel MPTS
Socket Weld
3 3/16
IM Alloy 400 Male Tube Weld x Tube
MTTS
4 1/4 Socket Weld
IHC Alloy C-276
5 5/16 TSFC Tube Socket Female Connector

6 3/8 TSFE Tube Socket Female Elbow

8 1/2 TSMC Tube Socket Male Connector

TSME Tube Socket Male Elbow
10 5/8
TSU Tube Socket Union
12 3/4
TSUC Tube Socket Union Cross
16 1
TSUE Tube Socket Union Elbow
20 1 1/4
TSUT Tube Socket Union Tee
24 1 1/2
TSWU Tube Socket Weld Union
32 2

All Other Fittings

SAE, BSPP, BSPT, and AN 37°
Fittings and Adapters

Material Brand 1st End Size 1st End Type 2nd End Size 2nd End Type Options

ISS T 4 MST 2 MC -10K

Material Nominal Size Fitting Type

Designator Material Designator Size SAE Thread Part Description

IB Brass 2 1/8 5/16-24 AN 37° Male AN

ISS 316 Stainless Steel 3 3/16 3/8-24 ANF 37° Female AN
IM Alloy 400/R405 4 1/4 7/16-20 CGP Countersunk SAE Plug
IHC Alloy C-276 5 5/16 1/2-20
FC Female Connector
6 3/8 9/16-18
FST Female SAE
Options 8 1/2 3/4-16
GP SAE Plug
Designator Option 10 5/8 7/8-14
ME Male Elbow
-10K 10K Fittings 12 3/4 1 1/16-12
MRS Male BSPP
-BN Nitrile O-ring 16 1 1 5/16-12
MRT Male BSPT
-V FKM O-rings 20 1 1/4 1 5/8-12
Clean Per 24 1 1/2 1 7/8-12 MST Male SAE
-XP98
ASTM G93 Level C
32 2 2 1/2-12
-XP97 No Lube

08
Selection Guide
Our selection guide makes it easy to locate any fitting.
Simply turn to the page designated in the lower right-hand corner.

How to Order
NPT Tapered Thread
Nipples
Hex Nipple Hex Reducing Nipple Hex Long Nipple Close Nipple

HN 12 HRN 12 HLN 13 CN 13

Couplings Cap & Plugs

Hex Coupling Hex Reducing Pipe Cap Pipe Plug Hollow Hex Plug
Coupling
09

HCG 14 HRCG 14 PCP 15 PP 15 HHP 16

Selection Guide
Adapters Vent Protector Bushing
Adapter Reducing Adapter Mud Dauber Reducing Bushing

A 16 RA 17 MD 17 RB 18

Tee Cross
Pipe Tee Street Tee Branch Tee Male Tee Pipe Cross
www.mySSP.com

PT 19 ST 19 BT 20 MT 21 PCS 21
 Elbow Union Ball Joint

Elbow 45° Elbow Male Elbow Female Pipe Union

E 21 E45 22 ME 23 KUT 24
Reducing Street
Street Elbow Elbow 45° Street Elbow

SE 23 RSE 23 SE45 24

SAE Parallel Thread

Fittings & Adapters
Female SAE x Female SAE x Male SAE x Male SAE x
Male NPT Male SAE Male NPT Male SAE

FST-MC 25 FST-MST 25 MC-MST 26 MST 26

PLUGS
Plug, SAE Plug, SAE
Countersunk

GP 27 CGP 27

10
Weld & Braze
Tube to Pipe
Tube Socket Weld Tube Socket Weld Tube Sock Weld Tube Socket Weld
Male Connector Female Connector Male Elbow Female Elbow

Selection Guide
TSMC 32 TSFC 28 TSME 29 TSFE 29

Tube to Tube Union

Tube Socket Weld Tube Socket Weld Tube Socket Weld Tube Socket Weld
Union Union Elbow Union Tee Union Cross

TSU 30 TSUE 30 TSUT 31 TSUC 31

Weld Adapters
Male Tube Weld x Male Pipe Weld X

11
Tube Socket Weld Tube Socke Weld

MTTS 32 MPTS 32

ISO/BSP Thread & AN Adapter

Adapters
37° AN X 37° AN X 37° AN X Female NPT X Female ISO Straight X
Female NPT Male NPT Male SAE Male ISO Tapered Male NPT Tapered

AN-FC 33 AN-MC 34 AN-MST 35 FC-MRT 36 FRS-MC 36

Male NPT x Female NPT x Male NPT x Bonded Washer O-Ring
Male ISO Straight Male ISO Straight Male ISO Tapered
www.mySSP.com

MC-MRS 37 FC-MRS 37 MC-MRT 38 DW-BSPP 38 R 38

 P E H 316 SS Brass
Part # Male A Minimum Hex Working Working
NPT Size Opening Flat Pressure Pressure
HN: T1HN 1/16 1.01 0.12 5/16 11,300 5,550

Hex Nipple
T2HN 1/8 1.06 0.18 7/16 10,100 5,050
T4HN 1/4 1.45 0.28 5/8 8,300 4,050
T6HN 3/8 1.45 0.40 3/4 7,850 3,950
T8HN 1/2 1.89 0.53 7/8 7,750 3,850
T12HN 3/4 1.96 0.71 1 1/8 7,350 3,650
T16HN 1 2.34 0.93 1 3/8 5,500 2,650
T20HN 1 1/4 2.48 1.25 1 3/4 6,200 -
T24HN 1 1/2 2.61 1.5 2 5,100 -
T32HN 2 2.82 1.93 2 1/2 4,000 -

TruFit 10K
A T2HN-10K 1/8 1.06 0.18 7/16 10,000 -
T4HN-10K 1/4 1.45 0.25 5/8 10,000 -
T6HN-10K 3/8 1.45 0.33 3/4 10,000 -
E
T8HN-10K 1/2 1.89 0.41 7/8 10,000 -
T12HN-10K 3/4 1.96 0.53 1-1/8 10,000 -

P P T16HN-10K 1 2.34 0.67 1-3/8 10,000 -

H HEX T32HN-10K 2 2.82 1.28 2-1/2 10,000 -

P P1 E 316 SS Brass
Part # Male Male A Minimum H Working Working
NPT Size NPT Size Opening Pressure Pressure
T2HRN1 1/8 1/16 1.03 0.11 7/16 10,100 5,050
HRN T4HRN2 1/4 1/8 1.26 0.19 5/8 8,300 4,050

Hex Reducing
T6HRN2 3/8 1/8 1.26 0.19 3/4 7,850 3,950
T6HRN4 3/8 1/4 1.45 0.28 3/4 7,850 3,950

Nipple T8HRN2
T8HRN4
1/2
1/2
1/8
1/4
1.51
1.70
0.19
0.28
7/8
7/8
7,750
7,750
3,850
3,850
T8HRN6 1/2 3/8 1.70 0.40 7/8 7,750 3,850
T12HRN4 3/4 1/4 1.77 0.28 1 1/8 7,350 3,650
T12HRN8 3/4 1/2 1.96 0.53 1 1/8 7,350 3,650
T16HRN8 1 1/2 2.15 0.53 1 3/8 5,500 2,650
T16HRN12 1 3/4 2.15 0.71 1 3/8 5,500 2,650
T20HRN16 1 1/4 1 2.45 0.93 1 3/4 5,500 -
T24HRN16 1 1/2 1 2.55 0.93 2 5,100 -
TruFit 10K
P H T4HRN2-10K 1/4 1/8 1.26 0.19 5/8 10,000 -
Hex
P1 T6HRN2-10K 3/8 1/8 1.26 0.19 3/4 10,000 -
T6HRN4-10K 3/8 1/4 1.45 0.25 3/4 10,000 -
T8HRN2-10K 1/2 1/8 1.51 0.19 7/8 10,000 -
E
T8HRN4-10K 1/2 1/4 1.70 0.25 7/8 10,000 -
T8HRN6-10K 1/2 3/8 1.70 0.33 7/8 10,000 -
T12HRN4-10K 3/4 1/4 1.77 0.25 1-1/8 10,000 -
A T12HRN6-10K 3/4 3/8 1.77 0.33 1-1/8 10,000 -
T12HRN8-10K 3/4 1/2 1.96 0.41 1-1/8 10,000 -
T16HRN4-10K 1 1/4 1.96 0.25 1-3/8 10,000 -
T16HRN6-10K 1 3/8 1.96 0.33 1-3/8 10,000 -
T16HRN8-10K 1 1/2 2.15 0.41 1-3/8 10,000 -
T16HRN12-10K 1 3/4 2.15 0.53 1-3/8 10,000 -

12 Dimensions are for reference only and are subject to change.

 P E 316 SS Brass
Part # Male A Minimum H Working Working
NPT Size Opening Pressure Pressure

HLN T2HLN1.5 1/8 1.50 0.19 7/16 10,100 5,050

Hex Long
T2HLN2.0 1/8 2.00 0.19 7/16 10,100 5,050
T2HLN2.5 1/8 2.50 0.19 7/16 10,100 5,050

NPT Nipples
Nipple T2HLN3.0
T4HLN1.5
1/8
1/4
3.00
1.50
0.19
0.28
7/16
5/8
10,100
8,300
5,050
4,050
T4HLN2.0 1/4 2.00 0.28 5/8 8,300 4,050
T4HLN2.5 1/4 2.50 0.28 5/8 8,300 4,050
T4HLN3.0 1/4 3.00 0.28 5/8 8,300 4,050
T4HLN4.0 1/4 4.00 0.28 5/8 8,300 4,050
T6HLN1.5 3/8 1.50 0.40 3/4 7,850 3,950

A T6HLN2.0 3/8 2.00 0.40 3/4 7,850 3,950

T6HLN2.5 3/8 2.50 0.40 3/4 7,850 3,950
E T6HLN3.0 3/8 3.00 0.40 3/4 7,850 3,950
T8HLN2.0 1/2 2.00 0.53 7/8 7,750 3,850
P H HEX P
T8HLN3.0 1/2 3.00 0.53 7/8 7,750 3,850
T8HLN4.0 1/2 4.00 0.53 7/8 7,750 3,850
T12HLN2.0 3/4 2.00 0.71 1 1/8 7,350 3,650
T12HLN3.0 3/4 3.00 0.71 1 1/8 7,350 3,650
T12HLN4.0 3/4 4.00 0.72 1 1/16 7,350 3,650
T16HLN3.0 1 3.00 0.93 1 3/8 5,500 2,650
T16HLN4.0 1 4.00 0.93 1 3/8 5,500 2,650

13
TruFit 10K
T2HLN3.0-10K 1/8 3.00 0.19 7/16 10,000 -
T4HLN2.0-10K 1/4 2.00 0.25 5/8 10,000 -
T4HLN3.0-10K 1/4 3.00 0.25 5/8 10,000 -
T4HLN4.0-10K 1/4 4.00 0.25 5/8 10,000 -
T4HLN6.0-10K 1/4 6.00 0.25 5/8 10,000 -
T6HLN3.0-10K 3/8 3.00 0.33 3/4 10,000 -
T6HLN4.0-10K 3/8 4.00 0.33 3/4 10,000 -
T6HLN6.0-10K 3/8 6.00 0.33 3/4 10,000 -
T8HLN1.5-10K 1/2 1.50 0.41 7/8 10,000 -
T8HLN1.75-10K 1/2 1.75 0.41 7/8 10,000 -
T8HLN3.0-10K 1/2 3.00 0.41 7/8 10,000 -
T8HLN4.0-10K 1/2 4.00 0.41 7/8 10,000 -
T8HLN6.0-10K 1/2 6.00 0.41 7/8 10,000 -

CN P E 316 SS Brass
Close Nipple PART # Male
NPT Size
A Minimum
Opening
H Working
Pressure
Working
Pressure
T2CN 1/8 0.75 0.16 7/16 10,100 5,050

T4CN 1/4 1.13 0.25 9/16 8,300 4,050

T6CN 3/8 1.13 0.34 11/16 7,850 3,950

T8CN 1/2 1.50 0.42 7/8 7,750 3,850

www.mySSP.com

P H ROUND P T12CN 3/4 1.50 0.57 1 1/16 7,350 3,650

P H ROUND P
T16CN 1 1.88 0.84 1 3/8 5,500 2,650

E E

A
A

Dimensions are for reference only and are subject to change.

 HCG: Hex Coupling
P E 316 SS Brass
TruFit
Female A Minimum H Working Working
Part #
NPT Size Opening Pressure Pressure
T2HCG 1/8 0.75 0.34 5/8 9,250 3,250

T4HCG 1/4 1.13 0.45 3/4 7,750 3,350

T6HCG 3/8 1.13 0.59 7/8 6,800 2,650

T8HCG 1/2 1.50 0.73 1 1/8 5,950 2,450

T12HCG 3/4 1.53 0.94 1 3/8 5,600 2,350

T16HCG 1 1.89 1.17 1 5/8 5,250 2,250

T20HCG 1 1/4 1.93 1.68 2 6,350 -

A
T24HCG 1 1/2 1.93 1.92 2 3/8 5,600 -

T32HCG 2 1.96 2.39 2 7/8 4,650 -

TruFit 10K
E T2HCG-10K 1/8 0.75 0.33 5/8 10,000 -
P
T4HCG-10K 1/4 1.13 0.42 13/16 10,000 -

T6HCG-10K 3/8 1.13 0.56 1" 10,000 -

H HEX T8HCG-10K 1/2 1.50 0.69 1-1/4 10,000 -

T12HCG-10K 3/4 1.53 0.89 1-1/2 10,000 -

T16HCG-10K 1 1.89 1.13 1-7/8 10,000 -

HRCG: Hex Reducing Coupling

P P1 E 316 SS Brass
TruFit
Female Female A Minimum H Working Working
Part #
NPT Size NPT Size Opening Pressure Pressure
T4HRCG2 1/4 1/8 1.13 0.43 3/4 7,750 3,250
T6HRCG4 3/8 1/4 1.13 0.56 7/8 6,800 2,650

T8HRCG2 1/2 1/8 1.50 0.43 1 1/8 5,950 2,450

T8HRCG4 1/2 1/4 1.50 0.56 1 1/8 5,950 2,450

T8HRCG6 1/2 3/8 1.50 0.70 1 1/8 5,950 2,450

T12HRCG4 3/4 1/4 1.75 0.56 1 3/8 5,600 2,350

T12HRCG8 3/4 1/2 1.88 0.86 1 3/8 5,600 2,350

A
T16HRCG8 1 1/2 1.89 0.86 1 5/8 5,250 2,250

T16HRCG12 1 3/4 1.89 1.07 1 5/8 5,250 2,250

TruFit 10K
E T4HRCG2-10K 1/4 1/8 1.13 0.33 13/16 10,000 -
P
T6HRCG2-10K 3/8 1/8 1.13 0.33 1" 10,000 -
P1 T6HRCG4-10K 3/8 1/4 1.13 0.42 1" 10,000 -
H T8HRCG2-10K 1/2 1/8 1.50 0.33 1-1/4 10,000 -

T8HRCG4-10K 1/2 1/4 1.50 0.42 1-1/4 10,000 -

T8HRCG6-10K 1/2 3/8 1.50 0.56 1-1/4 10,000 -

T12HRCG4-10K 3/4 1/4 1.75 0.42 1-1/2 10,000 -

T12HRCG6-10K 3/4 3/8 1.75 0.56 1-1/2 10,000 --

T12HRCG8-10K 3/4 1/2 1.88 0.69 1-1/2 10,000 -

T16HRCG8-10K 1 1/2 1.89 0.69 1-7/8 10,000 -

T16HRCG12-10K 1 3/4 1.89 0.89 1-7/8 10,000 -

14 Dimensions are for reference only and are subject to change.

 PCP: Pipe Cap
P 316 SS Brass
TruFit
Female A H Working Working
Part #
NPT Size Pressure Pressure
T2PCP 1/8 0.53 5/8 9,250 3,250

T4PCP 1/4 0.91 3/4 7,750 3,350

NPT Couplings
T6PCP 3/8 1.03 7/8 6,800 2,650

T8PCP 1/2 1.34 1 1/8 5,950 2,450

T12PCP 3/4 1.44 1 3/8 5,600 2,350

A T16PCP 1 1.62 1 5/8 5,250 2,250

TruFit 10K
T2PCP-10K 1/8 0.53 5/8 10,000 -

P T4PCP-10K 1/4 0.91 13/16 10,000 -

T6PCP-10K 3/8 1.03 1 10,000 -

T8PCP-10K 1/2 1.34 1-1/4 10,000 -

H T12PCP-10K 3/4 1.43 1-1/2 10,000 -

T16PCP-10K 1 1.63 1-7/8 10,000 -

15
PP: Pipe Plug
P 316 SS Brass
TruFit
Male A H Working Working
Part #
NPT Size Pressure Pressure
T1PP 1/16 0.53 3/8 11,300 5,550

NPT Caps, Plugs

T2PP 1/8 0.56 7/16 10,100 5,050

T4PP 1/4 0.74 9/16 8,300 4,050

T6PP 3/8 0.78 11/16 7,850 3,950

T8PP 1/2 0.97 7/8 7,750 3,850

T12PP 3/4 1.10 1 1/16 7,350 3,650

T16PP 1 1.24 1 5/16 5,500 2,650

T20PP 1 1/4 1.44 1 3/4 6,200 -

T24PP 1 1/2 1.50 2 5,100 -

A T32PP 2 1.62 2 1/2 4,000 -

TruFit 10K
T2PP-10K 1/8 0.56 7/16 10,000 -

T4PP-10K 1/4 0.74 9/16 10,000 -

T6PP-10K 3/8 0.78 11/16 10,000 -

www.mySSP.com

T8PP-10K 1/2 0.97 7/8 10,000 -

H HEX T12PP-10K 3/4 1.10 1-1/16 10,000 -
P
T16PP-10K 1 1.24 1-5/16 10,000 -

Dimensions are for reference only and are subject to change.

 A

HH
HEX

HHP: Hollow Hex Plug

P

316 SS Brass
TruFit P Male
A HH Working Working
Part # NPT Size
Pressure Pressure
T2HHP 1/8 0.30 3/16 10,100 5,050

T4HHP 1/4 0.46 1/4 8,300 4,050

T6HHP 3/8 0.46 5/16 7,850 3,950

T8HHP 1/2 0.54 3/8 7,750 -

T12HHP 3/4 0.55 9/16 7,350 -

T16HHP 1 0.69 5/8 5,500 -

A: Adapter
E

H P

P E 316 SS Brass
TruFit
Male & Female A Minimum H Working Working
Part #
NPT Size Opening Pressure Pressure
T2A 1/8 1.04 0.21 9/16 9,250 3,250

T4A 1/4 1.39 0.28 3/4 7,750 3,350

T6A 3/8 1.44 0.40 7/8 6,800 2,650

T8A 1/2 1.87 0.50 1 1/16 5,950 2,450

T12A 3/4 1.93 0.53 1 1/8 5,600 2,350

T16A 1 2.37 0.72 1 3/8 5,250 2,250

TruFit 10K
T4A-10K 1/4 1.39 0.25 13/16 10,000 -

T6A-10K 3/8 1.44 0.33 1 10,000 -

T8A-10K 1/2 1.87 0.41 1-1/4 10,000 -

T12A-10K 3/4 1.93 0.53 1-1/2 10,000 -

T16A-10K 1 2.37 0.67 1-7/8 10,000 -

16 Dimensions are for reference only and are subject to change.

 A
S

RA: Reducing Adapter P E

H P1

NPT Plug, NPT Adapters

P P1 E 316 SS Brass
TruFit
Female Male A Minimum H Working Working
Part #
NPT Size NPT Size Opening Pressure Pressure
T2RA1 1/8 1/1 6 1.09 0.15 9/16 9,250 3,250

T4RA2 1/4 1/8 1.21 0.19 3/4 7,750 3,350

T6RA2 3/8 1/8 1.25 0.19 7/8 6,800 2,650

T6RA4 3/8 1/4 1.44 0.28 7/8 6,800 2,650

T8RA2 1/2 1/8 1.50 0.19 1 1/8 5,950 2,450

T8RA4 1/2 1/4 1.68 0.28 1 1/8 5,950 2,450

T8RA6 1/2 3/8 1.68 0.41 1 1/8 5,950 2,450

T12RA4 3/4 1/4 1.78 0.28 1 3/8 5,600 2,350

T12RA6 3/4 3/8 1.78 0.40 1 3/8 5,600 2,350

T12RA8 3/4 1/2 1.93 0.53 1 3/8 5,600 2,350

T16RA4 1 1/4 2.00 0.28 1 5/8 5,250 2,250

T16RA8 1 1/2 2.18 0.53 1 5/8 5,250 2,250

T16RA12 1 3/4 2.18 0.72 1 5/8 5,250 2,250

T20RA16 1 1/4 1 2.46 0.93 2 5,500 -

T24RA16 1 1/2 1 2.47 0.93 2 3/8 5,500 -

TruFit 10K

17
T4RA2-10K 1/4 1/8 1.21 0.19 13/16 10,000 -

T6RA2-10K 3/8 1/8 1.25 0.19 1 10,000 -

T6RA4-10K 3/8 1/4 1.44 0.25 1 10,000 -

T8RA2-10K 1/2 1/8 1.50 0.19 1-1/4 10,000 -

T8RA4-10K 1/2 1/4 1.68 0.25 1-1/4 10,000 -

T8RA6-10K 1/2 3/8 1.68 0.33 1-1/4 10,000 -

T12RA4-10K 3/4 1/4 1.78 0.25 1-1/2 10,000 -

T12RA6-10K 3/4 3/8 1.78 0.33 1-1/2 10,000 -

NPT Mud Daubers

T12RA8-10K 3/4 1/2 1.93 0.41 1-1/2 10,000 -

T16RA8-10K 1 1/2 2.18 0.41 1-7/8 10,000 -

T16RA12-10K 1 3/4 2.18 0.53 1-7/8 10,000 -

H HEX
P

MD: Mud Dauber E

TruFit Male Pipe

A E H
Part# P-NPT
www.mySSP.com

T2MD 1/8 0.56 0.19 9/16

T4MD 1/4 0.75 0.28 9/16

T6MD 3/8 0.78 0.37 11/16

T8MD 1/2 0.96 0.46 7/8

T12MD 3/4 1.10 0.63 1 1/16

Dimensions are for reference only and are subject to change.

 A

E
RB: Reducing Bushing
P1

P
H HEX

P P1 E 316 SS Brass
TruFit
Male Female A Minimum H Working Working
Part #
NPT Size NPT Size Opening Pressure Pressure
T2RB1 1/8 1/16 0.63 0.19 7/16 9,600 3,350

T4RB2 1/4 1/8 0.85 0.28 5/8 8,300 3,250

T6RB2 3/8 1/8 0.85 0.34 3/4 7,850 3,250

T6RB4 3/8 1/4 0.85 0.40 3/4 7,750 3,350

T8RB2 1/2 1/8 1.09 0.34 7/8 7,750 3,250

T8RB4 1/2 1/4 1.09 0.43 7/8 7,750 3,350

T8RB6 1/2 3/8 1.10 0.53 7/8 6,800 2,650

T12RB4 3/4 1/4 1.17 0.56 1 1/8 7,350 3,350

T12RB6 3/4 3/8 1.17 0.57 1 1/8 6,800 2,650

T12RB8 3/4 1/2 1.17 0.70 1 1/8 5,950 2,450

T16RB4 1 1/4 1.36 0.44 1 3/8 5,500 2,650

T16RB6 1 3/8 1.36 0.58 1 3/8 5,500 2,650

T16RB8 1 1/2 1.36 0.70 1 3/8 5,500 2,450

T16RB12 1 3/4 1.36 0.92 1 3/8 5,500 2,350

T20RB16 1 1/4 1 1.47 1.15 1 3/4 5,250 -

T24RB16 1 1/2 1 1.57 1.15 2 5,100 -

T24RB20 1 1/2 1 1/4 1.57 1.50 2 5,100 -

T32RB16 2 1 1.75 1.50 2 1/2 4,000 -

T32RB20 2 1 1/4 1.75 1.50 2 1/2 4,000 -

T32RB24 2 1 1/2 1.75 1.70 2 1/2 4,000 -

TruFit 10K
T4RB2-10K 1/4 1/8 1.15 0.24 5/8 10,000 -

T6RB4-10K 3/8 1/4 1.38 0.32 13/16 10,000 -

T8RB2-10K 1/2 1/8 1.09 0.24 7/8 10,000 -

T8RB4-10K 1/2 1/4 1.53 0.38 7/8 10,000 -

T8RB6-10K 1/2 3/8 1.62 0.38 1" 10,000 -

T12RB4-10K 3/4 1/4 1.17 0.42 1-1/8 10,000 -

T12RB6-10K 3/4 3/8 1.59 0.50 1-1/8 10,000 -

T12RB8-10K 3/4 1/2 1.85 0.51 1-1/4 10,000 -

T16RB4-10K 1" 1/4 1.36 0.42 1-3/8 10,000 -

T16RB6-10K 1" 3/8 1.36 0.56 1-3/8 10,000 -

T16RB8-10K 1" 1/2 1.97 0.62 1-3/8 10,000 -

T16RB12-10K 1" 3/4 2.10 0.67 1-1/2 10,000 -

T32RB8-10K 2" 1/2 1.75 0.68 2-1/2 10,000 -

18 Dimensions are for reference only and are subject to change.

 A
L L
H WRENCH FLAT

P
PT: Pipe Tee L

NPT Bushings
P E 316 SS Brass
TruFit
Female A Minimum H L Working Working
Part #
NPT Size Opening Pressure Pressure
T2PT 1/8 1.32 0.34 9/16 0.66 9,250 3,250

T4PT 1/4 1.76 0.45 3/4 0.88 7,750 3,350

T6PT 3/8 2.04 0.59 7/8 1.02 6,800 2,650

T8PT 1/2 2.46 0.73 1 1/16 1.23 5,950 2,450

T12PT 3/4 2.72 0.94 1 5/16 1.36 5,600 2,350

T16PT 1 3.24 1.17 1 5/8 1.62 5,250 2,250

T20PT 1 1/4 3.40 1.68 2 1.70 6,350 -

T24PT 1 1/2 4.16 1.92 2 3/8 2.08 5,600 -

T32PT 2 4.78 2.31 2 7/8 2.39 4,650 -

TruFit 10K
T2PT-10K 1/8 33.5 8.3 13/16 0.66 10,000 -

T4PT-10K 1/4 44.7 10.6 3/4 0.88 10,000 -

T6PT-10K 3/8 51.8 14.2 1-1/16 1.02 10,000 -

19
T8PT-10K 1/2 62.4 17.5 1-5/16 1.23 10,000 -

A
L S
H WRENCH FLAT

P E
ST: Street Tee L P

NPT Tees
P
E 316 SS Brass
TruFit Male &
A Minimum H L S Working Working
Part # Female
Opening Pressure Pressure
NPT Size
T2ST 1/8 1.44 0.19 9/16 0.66 0.78 (19.8) 9,250 3,250

T4ST 1/4 1.97 0.28 3/4 0.88 1.09 (27.7) 7,750 3,350

T6ST 3/8 2.24 0.40 (10.2) 7/8 1.02 1.22 (31) 6,800 2,650

T8ST 1/2 2.70 0.53 (13.5) 1 1/16 1.23 1.47 (37.3) 5,250 2,450

T12ST 3/4 2.99 0.71 (18) 1 3/8 1.38 1.61 (40.9) 5,600 -

T16ST 1 3.59 0.93 (23.6) 1 5/8 1.62 1.97 (50) 5,250 -

www.mySSP.com

T20ST 1 1/4 4.08 1.25 (31.8) 2 1.70 2.38 (60.5) 6,350 -

T24ST 1 1/2 4.72 1.50 (38.1) 2 3/8 2.08 2.64 (67.1) 5,600 -

T32ST 2 5.39 1.94 (49.3) 2 7/8 2.39 3.00 (76.2) 4,650 -

Dimensions are for reference only and are subject to change.

 A
L L
H WRENCH FLAT

P
P

BT: Branch Tee S

E P

P
E 316 SS Brass
TruFit Male &
A Minimum H L S Working Working
Part # Female
Opening Pressure Pressure
NPT Size
T2BT 1/8 1.32 0.19 9/16 0.66 0.78 9,250 3,250

T4BT 1/4 1.76 0.28 3/4 0.88 1.09 7,750 3,350

T6BT 3/8 2.04 0.40 7/8 1.02 1.22 6,800 2,650

T8BT 1/2 2.46 0.53 1 1/16 1.23 1.47 5,950 2,450

T12BT 3/4 2.27 0.71 1 3/8 1.36 1.59 5,600 -

T16BT 1 3.24 0.93 1 5/8 1.62 1.97 5,250 -

T20BT 1 1/4 3.40 1.25 2 1.70 2.38 6,200 -

T24BT 1 1/2 4.16 1.50 2 3/8 2.08 2.64 5,100 -

T32BT 2 4.78 1.94 2 7/8 2.39 3.00 4,000 -

A
S S
H WRENCH FLAT

MT: Male Tee P

S
P

P E 316 SS Brass
TruFit
Male A Minimum H S Working Working
Part #
NPT Size Opening Pressure Pressure
T2MT 1/8 1.56 0.19 7/16 0.78 10,100 5,050

T4MT 1/4 2.18 0.28 9/16 1.09 8,300 4,050

T6MT 3/8 2.44 0.40 3/4 1.22 7,850 3,950

T8MT 1/2 2.94 0.53 7/8 1.47 7,750 3,850

T12MT 3/4 3.18 0.71 1 1/16 1.59 7,350 -

T16MT 1 3.94 0.93 1 5/16 1.97 5,500 -

TruFit 10K

T4MT-10K 1/4 2.18 0.25 9/16 1.09 10,000 -

T6MT-10K 3/8 2.44 0.33 3/4 1.22 10,000 -

T8MT-10K 1/2 2.94 0.41 7/8 1.47 10,000 -

20 Dimensions are for reference only and are subject to change.

 A
L

PCS: Pipe Cross

P A

H L
WRENCH
FLAT
E

P E 316 SS Brass

NPT Crosses
TruFit
Female A Minimum H L Working Working
Part #
NPT Size Opening Pressure Pressure
T2PCS 1/8 1.32 0.34 9/16 0.66 9,250 3,250

T4PCS 1/4 1.76 0.45 3/4 0.88 7,750 3,350

T6PCS 3/8 2.04 0.59 7/8 1.02 6,800 2,650

T8PCS 1/2 2.46 0.73 1 1/16 1.23 5,950 2,450

T12PCS 3/4 2.72 0.94 1 5/16 1.36 5,600 2,350

T16PCS 1 3.24 1.17 1 5/8 1.62 5,250 2,250

L H
WRENCH
FLAT

E 21
E: Elbow L

P E 316 SS Brass
TruFit
Female Minimum H L Working Working
Part #
NPT Size Opening Pressure Pressure

NPT Elbows
T2E 1/8 0.34 9/16 0.66 9,250 3,250

T4E 1/4 0.45 3/4 0.88 7,750 3,350

T6E 3/8 0.59 7/8 1.02 6,800 2,650

T8E 1/2 0.73 1 1/16 1.23 5,950 2,450

T12E 3/4 0.94 1 5/16 1.36 5,600 2,350

T16E 1 1.17 1 5/8 1.62 5,250 2,250

T20E 1-1/4 1.47 1 7/8 1.70 1,800 -

T24E 1-1/2 1.69 2 1/2 2.08 4,550 -

T32E 2 2.16 2 7/8 2.39 3,050 -

TruFit 10K

T2E-10K 1/8 0.33 3/4 0.66 10,000 -

T4E-10K 1/4 0.42 3/4 0.88 10,000 -

www.mySSP.com

T6E-10K 3/8 0.56 1-1/16 1.02 10,000 -

T8E-10K 1/2 0.69 1-5/16 1.23 10,000 -

Dimensions are for reference only and are subject to change.

 H
L Wrench
Flat

E45: 45° Elbow

PT

P E 316 SS Brass
TruFit
Female Minimum H L Working Working
Part #
NPT Size Opening Pressure Pressure
T2E45 1/8 0.19 9/16 0.50 9,250 3,250

T4E45 1/4 0.28 3/4 0.69 7,750 3,350

T6E45 3/8 0.38 7/8 0.75 6,800 2,650

T8E45 1/2 0.47 1 1/16 0.94 5,950 2,450

T12E45 3/4 0.62 1 5/16 1.00 5,600 2,350

T16E45 1 0.88 1 5/8 1.19 5,250 2,250

H
WRENCH
S FLAT

E
ME: Male Elbow
S
P

P E 316 SS Brass
TruFit
Male Minimum H S Working Working
Part #
NPT Size Opening Pressure Pressure
T2ME 1/8 0.19 7/16 0.78 10,100 5,050

T4ME 1/4 0.28 9/16 1.09 8,300 4,050

T6ME 3/8 0.40 3/4 1.22 7,850 3,950

T8ME 1/2 0.53 7/8 1.47 7,750 3,850

T12ME 3/4 0.72 1 1/16 1.59 4,150 2,100

T16ME 1 0.94 1 5/8 1.57 3,800 1,500

TruFit 10K
T4ME-10K 1/4 0.25 9/16 1.09 10,000 -

T6ME-10K 3/8 0.33 3/4 1.22 10,000 -

T8ME-10K 1/2 0.41 7/8 1.47 10,000 -

22 Dimensions are for reference only and are subject to change.

 H
S Wrench
Flat

SE: Street Elbow L

P
E

NPT Elbows
P
E 316 SS Brass
TruFit Male &
Minimum H L S Working Working
Part # Female
Opening Pressure Pressure
NPT Size
T1SE 1/16 0.12 9/16 0.50 0.72 9,600 3,350

T2SE 1/8 0.19 9/16 0.66 0.78 9,250 3,250

T4SE 1/4 0.28 3/4 0.88 1.09 7,750 3,350

T6SE 3/8 0.40 7/8 1.02 1.22 6,800 2,650

T8SE 1/2 0.53 1 1/16 1.23 1.47 5,950 2,450

T12SE 3/4 0.72 1 5/16 1.36 1.59 5,600 2,350

T16SE 1 0.93 1 5/8 1.62 1.97 5,250 2,250

T20SE 1 1/4 1.25 2 2.38 1.70 1,800 -

T24SE 1 1/2 1.50 2 3/8 2.64 2.08 2,800 -

T32SE 2 1.94 2 7/8 3.00 2.39 2,450 -

TruFit 10K
T2SE-10K 1/8 4.8 3/4 0.98 0.66 10,000 -

23
T4SE-10K 1/4 6.3 3/4 1.09 0.88 10,000 -

T6SE-10K 3/8 8.3 1 1/16 1.22 1.02 10,000 -

T8SE-10K 1/2 10.4 1 5/16 1.47 1.23 10,000 -

S H
Wrench
Flat
P

RSE: Reducing
L
Street Elbow
P1

P P1 E 316 SS Brass
TruFit
Female Male Minimum H L S Working Working
Part #
NPT size NPT size Opening Pressure Pressure
T2RSE1 1/8 1/16 0.12 9/16 0.91 0.88 6,550 3,250

T4RSE2 1/4 1/8 0.19 3/4 0.91 0.88 6,650 3,350

www.mySSP.com

T6RSE4 3/8 1/4 0.28 7/8 1.22 1.02 5,350 2,650

T8RSE4 1/2 1/4 0.28 1 1/16 1.28 1.23 4,950 2,450

T8RSE6 1/2 3/8 0.38 1 1/16 1.28 1.23) 4,950 2,450

Dimensions are for reference only and are subject to change.

 H
WRENCH
FLAT
S

L
SE45: 45° Street Elbow P

P E

P 316 SS
E Brass
TruFit Male & Working
Minimum H L S Working
Part # Female Pressure
Opening Pressure
NPT Size
T2SE45 1/8 0.19 9/16 0.47 0.72 9,250 3,250

T4SE45 1/4 0.28 3/4 0.62 1.05 7,750 3,350

T6SE45 3/8 0.40 7/8 0.72 1.06 6,800 2,650

T8SE45 1/2 0.53 1 1/16 0.91 1.34 5,950 2,450

T12SE45 3/4 0.71 1 5/16 0.97 1.38 5,600 2,350

T16SE45 1 0.93 1 5/8 1.12 1.72 5,250 2,250

T20SE45 1 1/4 1.25 2 1.80 1.63 2,350 -

T24SE45 1 1/2 1.50 2 3/8 2.06 1.69 2,800 -

A
P

KUT: Female Pipe Union X E

P 316 SS
TruFit Pipe Teflon
Female A E H X Working
Part # Size Ring Size
NPT Thread Pressure
T2KUT 1/8 1/8 1.63 0.34 1 1/8 0.75 8TR 6,950

T4KUT 1/4 1/4 1.63 0.39 1 1/8 0.75 8TR 5,700

T6KUT 3/8 3/8 1.73 0.46 1 1/4 0.88 10TR 4,600

T8KUT 1/2 1/2 1.91 0.62 1 3/4 1.13 14TR 5,250

T12KUT 3/4 3/4 2.31 0.81 2 1.38 16TR 7,200

T16KUT 1 1 2.91 1.04 2 1/2 1.81 20TR 5,350

T20KUT 1 1/4 1 1/4 3.67 1.38 3 2.25 24TR 5,550

T24KUT 1 1/2 1 1/2 3.80 1.61 3 5/16 2.50 28TR 4,200

T32KUT 2 2 4.05 2.06 3 3/4 3.00 36TR 4,000

24 Dimensions are for reference only and are subject to change.

 A
S

NPT Elbows, Union Ball Joint

FST-MC: Female SAE P E

x Male NPT
P1
H

P P1
316 SS
TruFit Female Male
A E S H Working
Part # SAE NPT
Pressure
Thread Thread

T6FST4MC 9/16-18 1/4-18 1.36 0.28 0.56 13/16 5,400

T8FST6MC 3/4-16 3/8-18 1.49 0.41 0.56 1 1/16 5,400

T8FST8MC 3/4-16 1/2-14 1.58 0.53 0.75 1 1/16 5,400

A
S
25
FST-MST: Female SAE P E

x Male SAE
P1
H

SAE Fittings, Adapters

P P1
316 SS
TruFit Female Male
A E S H Working
Part # SAE SAE
Pressure
Thread Thread
T4FST4MST 7/16-20 7/16-20 1.06 0.20 0.36 11/16 5,400

T4FST6MST 7/16-20 9/16-18 1.16 0.20 0.36 13/16 5,400

T6FST6MST 9/16-18 9/16-18 1.19 0.30 0.39 13/16 5,400

T6FST8MST 9/16-18 3/4-16 1.38 0.30 0.39 1 1/16 4,800

T8FST6MST 3/4-16 9/16-18 1.06 0.42 0.44 7/8 5,400

T8FST8MST 3/4-16 3/4-16 1.47 0.42 0.44 1 1/16 4,800

T8FST10MST 3/4-16 7/8-14 1.56 0.42 0.44 1 1/8 3,600

T10FST8MST 7/8-14 3/4-16 1.31 0.50 0.50 1 4,800

T10FST12MST 7/8-14 1 1/16-12 1.69 0.50 0.50 1 3/8 4,200

T12FST10MST 1 1/16-12 7/8 -14 1.44 0.66 0.59 1 1/4 3,600

T12FST16MST 1 1/16-12 1 5/16-12 1.88 0.66 0.59 1 5/8 2,400

www.mySSP.com

T16FST12MST 1 5/16-12 1 /16-12 1.75 0.88 0.59 1 1/2 4,200

Dimensions are for reference only and are subject to change.

 A
L S

MC-MST: Male NPT E

x Male SAE P P1
H HEX

P1 P
316 SS
TruFit Male Male
A E S L H Working
Part # NPT SAE
Pressure
Thread Thread
T4MC4MST 1/4-18 7/16-20 1.24 0.20 0.56 0.36 9/16 6,000

T4MC6MST 1/4-18 9/16 - 18 1.30 0.28 0.56 0.36 11/16 6,000

T6MC6MST 3/8-18 9/16-18 1.30 0.30 0.56 0.39 11/16 6,000

T6MC8MST 3/8-18 3/4-16 1.37 0.41 0.56 0.39 7/8 6,000

T8MC8MST 1/2-14 3/4-16 1.56 0.42 0.75 0.44 7/8 6,000

T8MC10MST 1/2-14 7/8-14 1.69 0.50 0.75 0.44 1 4,800

T12MC12MST 3/4-14 1 1/16-12 1.75 0.66 0.75 0.59 1 1/4 4,800

T12MC16MST 3/4-14 1 5/16-12 1.89 0.72 0.75 0.59 1 1/2 3,600

T16MC16MST 1-11 1/2 1 5/16-12 1.90 0.84 0.94 0.59 1 1/2 3,600

TruFit 10K
T4MC4MST-10K 1/4 - 18 7/16 - 20 1.24 0.19 0.57 0.36 5/8 10000

T4MC6MST-10K 1/4 - 18 9/16 - 18 1.30 0.19 0.57 0.39 11/16 10000

T6MC6MST-10K 3/8 - 18 9/16 - 18 1.30 0.26 0.57 0.39 11/16 10000

T6MC8MST-10K 3/8 - 18 3/4 - 16 1.37 0.36 0.57 0.44 7/8 10000

T8MC8MST-10K 1/2 - 14 3/4 - 16 1.56 0.36 0.76 0.44 7/8 10000

T8MC10MST-10K 1/2 - 14 3/4 - 16 1.59 0.42 0.76 0.50 1-1/8 10000

T12MC12MST-10K 3/4 - 14 1-1/16 - 12 1.75 0.51 0.76 0.59 1-1/4 10000

T12MC16MST-10K 3/4 - 14 1-5/16 - 12 1.89 0.67 0.76 0.59 1-1/2 10000

T16MC16MST-10K 1 - 11-1/2 1-5/16 - 12 1.90 0.67 0.95 0.59 1-1/2 10000

A
S
MST: Male SAE
E
x Male SAE
P P
H HEX

P Male 316 SS
TruFit
SAE A E S H Working
Part #
Thread Pressure
T4MST 7/16-20 1.22 0.20 0.50 9/16 6,000

T6MST 9/16-18 1.04 0.30 0.59 11/16 6,000

T8MST 3/4-16 1.56 0.42 0.63 7/8 6,000

T10MST 7/8-14 1.81 0.48 0.75 1 5,400

T12MST 11/16-12 2.13 0.66 0.89 1 1/4 4,800

T16MST 1 5/16-12 2.13 0.88 0.89 1 1/2 3,600

T20MST 1 5/8-12 2.13 1.08 0.89 1 7/8 3,000

T24MST 1 7/8-12 2.13 1.34 0.89 2 1/8 2,400

T32MST 2 1/2-12 2.13 1.81 0.89 2 3/4 1,800

26 Dimensions are for reference only and are subject to change.

 A
L S

E
GP: Hex Plug, SAE
P
H HEX

SAE Fittings, Adapters

316 SS
TruFit P
A E S L H Working
Part # Thread
Pressure
T2GP 5/16 – 24 0.60 0.09 0.28 0.30 7/16 7,200

T3GP 3/8 – 24 0.60 0.13 0.28 0.30 1/2 7,200

T4GP 7/16 – 20 0.67 0.20 0.28 0.36 9/16 7,200

T5GP 1/2 - 20 0.67 0.23 0.28 0.36 5/8 7,200

T6GP 9/16 – 18 0.73 0.30 0.31 0.39 11/16 7,200

T8GP 3/4 - 16 0.80 0.42 0.34 0.44 7/8 7,200

T10GP 7/8 – 14 0.93 0.50 0.41 0.50 1 7,200

T12GP 1-1/16 - 12 1.09 0.66 0.47 0.59 1 1/4 7,200

T16GP 1-5/16 – 12 1.12 0.88 0.50 0.59 1 1/2 6,600

T20GP 1-5/8 – 12 1.20 1.09 0.58 0.59 1 7/8 4,800

T24GP 1-7/8 – 12 1.27 1.34 0.65 0.59 2 1/8 3,600

T32GP 2-1/2 - 12 1.43 1.81 0.81 0.59 2 3/4 2,400

S
A 27

CGP: Plug, SAE H HEX

Countersunk
P

316 SS
TruFit P

SAE Plugs
A S H Working
Part # Thread
Pressure
T2CGP 5/16-24 0.40 0.30 1/8 7200

T3CGP 3/8-24 0.40 0.30 1/8 7200

T4CGP 7/16-20 0.47 0.36 3/16 7200

T5CGP 1/2-20 0.47 0.36 3/16 7200

T6CGP 9/16-18 0.50 0.39 1/4 7200

T8CGP 3/4-16 0.58 0.44 5/16 7200

T10CGP 7/8-14 0.65 0.50 6/16 7200

T12CGP 1 1/16-12 0.77 0.59 9/16 7200

T16CGP 1 5/16-12 0.77 0.59 10/16 6600

T20CGP 1 5/8-12 0.77 0.59 3/4 4800

T24CGP 1 7/8-12 0.77 0.59 3/4 3600

www.mySSP.com

Dimensions are for reference only and are subject to change.

 A
D

TSMC: Tube Socket Weld Tx T E

x Male Connector P
H

T P 316 SS
TruFit
Tube NPT A D E H Tx Working
Part #
O.D. Male Pipe Pressure
T4TSMC4 1/4 1/4 1.12 0.25 0.19 5/8 0.50 8,000

T6TSMC4 3/8 1/4 1.25 0.34 0.28 5/8 0.60 8,000

T6TSMC6 3/8 3/8 1.31 0.34 0.28 3/4 0.63 7,800

T6TSMC8 3/8 1/2 1.50 0.34 0.37 7/8 0.63 7,700

T8TSMC4 1/2 1/4 1.44 0.40 0.28 13/16 0.79 6,600

T8TSMC6 1/2 3/8 1.31 0.38 0.37 3/4 0.73 6,600

T8TSMC8 1/2 1/2 1.66 0.41 0.43 7/8 0.81 6,600

T10TSMC8 5/8 1/2 1.63 0.47 0.50 15/16 0.92 6,700

T12TSMC12 3/4 3/4 1.69 0.50 0.66 1 1/8 1.11 6,700

T16TSMC16 1 1 2.00 0.56 0.91 1 3/8 1.36 6,100

A
D

TSFC: Tube Socket Weld Tx T E P

Female Connector
H

T P 316 SS
TruFit
Tube NPT A D E H Tx Working
Part #
O.D. Male Pipe Pressure

T2TSFC2 1/8 1/8 0.88 0.20 0.09 9/16 0.38 6,500

T4TSFC2 1/4 1/8 0.97 0.25 0.19 9/16 0.50 6,500

T4TSFC4 1/4 1/4 1.13 0.25 0.19 3/4 0.50 6,600

T6TSFC4 3/8 1/4 1.22 0.34 0.31 3/4 0.63 6,600

T8TSFC6 1/2 3/8 1.41 0.40 0.43 7/8 0.81 5,300

T8TSFC8 1/2 1/2 1.63 0.40 0.43 1 1/8 0.81 4,900

T10TSFC8 5/8 1/2 1.63 0.47 0.50 1 1/8 0.94 4,600

T12TSFC12 3/4 3/4 1.78 0.50 0.66 1 3/8 1.13 4,600

28 Dimensions are for reference only and are subject to change.

 A
D

TSU: Tube Socket

T E Tx
Weld Union

Weld Straight
T 316 SS
TruFit
Tube A D E Tx Working
Part #
O.D. Pressure

T4TSU 1/4 0.75 0.25 0.18 0.50 10,700

T6TSU 3/8 0.97 0.34 0.31 0.60 8,100

T8TSU 1/2 1.06 0.4 0.44 0.81 6,600

T10TSU 5/8 1.25 0.47 0.5 0.93 6,400

T12TSU 3/4 1.31 0.5 0.65 1.12 5,900

T16TSU 1 1.56 0.56 0.9 1.37 5,600

L
D W
Wrench
Flat
29
Tx T E

TSFE: Tube Socket Weld S

Female Elbow
PT

Weld Elbows
P 316 SS
TruFit T
NPT D E L S Tx W Working
Part # Tube O.D.
Male Pipe Pressure
T4TSFE4 1/4 1/4 0.25 0.19 0.81 0.90 0.50 3/4 7,400

T6TSFE4 3/8 1/4 0.34 0.31 0.91 0.88 0.63 7/8 7,400

T6TSFE8 3/8 1/2 0.40 0.31 1.03 1.23 0.63 1 1/16 5,700

T8TSFE8 1/2 1/2 0.41 0.44 1.13 1.23 0.81 1 1/16 5,700

T10TSFE8 5/8 1/2 0.47 0.50 1.16 1.23 0.94 1 1/16 5,600

T12TSFE12 3/4 3/4 0.50 0.66 1.44 1.36 1.13 1 5/16 4,600
www.mySSP.com

Dimensions are for reference only and are subject to change.

 L
D W

Tx T
TSME: Tube Socket
Weld Male Elbow S

P
E

T P 316 SS
TruFit
Tube NPT D E L S Tx W Working
Part #
O.D. Male Pipe Pressure
T4SME4 1/4 1/4 0.25 0.28 0.66 1.09 0.50 1/2 8,000

T6TSME4 3/8 1/4 0.31 0.28 0.91 1.09 0.58 1/2 8,000

T6TSME6 3/8 3/8 0.34 0.41 0.93 1.24 0.63 11/16 7,800

T6TSME8 3/8 1/2 0.46 0.53 0.97 1.47 0.39 13/16 7,700

T8TSME8 1/2 1/2 0.40 0.53 1.08 1.49 0.81 13/16 6,600
T12TSME12 3/4 3/4 0.50 0.71 1.33 1.61 1.12 1 5,800

L
D
W

Tx T E

TSUE: Tube Socket

Weld Union Elbow

T
TruFit Working
Tube D E L Tx W
Part # Pressure
O.D.
T4TSUE 1/4 0.25 0.18 0.69 0.49 7/16 10,700

T6TSUE 3/8 0.34 0.31 0.81 0.58 1/2 8,100

T8TSUE 1/2 0.40 0.44 1.02 0.78 3/4 6,600

T10TSUE 5/8 0.47 0.50 1.16 0.92 7/8 6,700

T12TSUE 3/4 0.50 0.65 1.31 1.12 1 5,900

T16TSUE 1 0.56 0.91 1.47 1.37 1 1/4 5,600

30 Dimensions are for reference only and are subject to change.

 L

E T Tx
TSUT: Tube Socket
Weld Union Tee
L
W

Weld Elbows
T 316 SS
TruFit
Tube A D E L Tx W Working
Part #
O.D. Pressure

T2TSUT 1/8 1.26 0.20 0.09 0.63 0.38 7/16 12,600

T4TSUT 1/4 1.38 0.25 0.18 0.69 0.50 7/16 10,700

T6TSUT 3/8 1.62 0.34 0.31 0.81 0.63 9/16 8,100

T8TSUT 1/2 2.00 0.40 0.43 1.00 0.73 3/4 6,600

T10TSUT 5/8 2.30 0.46 0.50 1.16 0.88 7/8 6,700

T12TSUT 3/4 2.62 0.50 0.65 1.31 1.04 1-1/16 5,900

T16TSUT 1 2.94 0.56 0.90 1.47 1.44 1-5/16 5,600

31
L

E T Tx
TSUC: Tube Socket
Weld Union Cross

Weld Tees, Cross

W
A

T 316 SS
TruFit
Tube A D E L Tx W Working
Part #
O.D. Pressure

T2TSUC 1/8 1.26 0.20 0.09 0.63 0.38 7/16 11,000

T4TSUC 1/4 1.38 0.25 0.18 0.69 0.49 7/16 10,700

T6TSUC 3/8 1.62 0.34 0.31 0.81 0.58 9/16 8,100

T8TSUC 1/2 2.00 0.40 0.44 1.00 0.78 3/4 6,600

T12TSUC 3/4 2.62 0.50 0.65 1.31 1.16 1-1/16 5,900

www.mySSP.com

Dimensions are for reference only and are subject to change.

 A
D

MTTS: Male Tube Weld x T T1 E Tx

Tube Socket Weld

T T1 316 SS
TruFit
Tube Tube A D E Tx Working
Part #
O.D. Socket Pressure

ISST4MTTS2 1/4 1/8 0.56 0.10 0.09 0.29 12,600

ISST6MTTS4 3/8 1/4 0.75 0.28 0.18 0.48 8,200

ISST8MTTS4 1/2 1/4 0.88 0.28 0.18 0.50 7,500

ISST8MTTS6 1/2 3/8 0.88 0.31 0.32 0.60 7,500

ISST12MTTS8 3/4 1/2 1.12 0.38 0.40 0.75 6,300

ISST16MTTS8 1 1/2 1.38 0.38 0.40 0.73 5,300

37 ½ ͦ

MPTS: Male Pipe Weld x P T1 E Tx

Tube Socket Weld
D
A

P T1 316 SS
TruFit
Pipe Tube A D E Tx Working
Part #
Size Socket Pressure

ISST4MPTS4 1/4 1/4 0.88 0.28 0.18 0.48 9,600

ISST6MPTS6 3/8 3/8 1.03 0.31 0.28 0.60 7,600

ISST6MPTS8 3/8 1/2 1.00 0.38 0.42 0.73 6,200

ISST8MPTS4 1/2 1/4 1.12 0.28 0.18 0.48 7,300

ISST8MPTS6 1/2 3/8 1.12 0.31 0.28 0.60 7,300

ISST8MPTS8 1/2 1/2 1.19 0.38 0.40 0.73 6,200

ISST12MPTS6 3/4 3/8 1.50 0.31 0.28 0.60 6,200

ISST12MPTS8 3/4 1/2 1.50 0.38 0.40 0.73 6,200

ISST12MPTS12 3/4 3/4 1.50 0.44 0.62 1.05 5,700

ISST16MPTS6 1 3/8 1.38 0.31 0.28 0.60 5,600

ISST16MPTS8 1 1/2 1.56 0.38 0.40 0.73 5,600

32 Dimensions are for reference only and are subject to change.

 A
L
S

AN-FC: 37° AN Female E P1

Weld Adapters
Connector P
H

P1 316 SS Brass
TruFit Tube P
Female NPT A E S L H Working Working
Part # O.D. Thread
Thread Pressure Pressure
T2AN2FC 1/8 5/16 1/8 1.12 0.06 0.45 0.67 9/16 6,000 -

T4AN2FC 1/4 7/16 1/8 1.19 0.17 0.55 0.64 9/16 6,000 3,250

T4AN4FC 1/4 7/16 1/4 1.38 0.17 0.55 0.83 3/4 6,000 3,250

T5AN4FC 5/16 1/2 1/4 1.34 0.23 0.55 0.79 3/4 6,000 -

T6AN4FC 3/8 9/16 1/4 1.40 0.30 0.56 0.84 3/4 6,000 3,250

T6AN6FC 3/8 9/16 3/8 1.41 0.30 0.56 0.85 7/8 6,000 3,250

T8AN6FC 1/2 3/4 3/8 1.56 0.39 0.66 0.90 7/8 6,000 -

T8AN4FC 1/2 3/4 1/4 1.55 0.39 0.61 0.89 13/16 6,000 -

T8AN8FC 1/2 3/4 1/2 1.75 0.39 0.66 1.09 1-1/8 6,000 -

T10AN8FC 5/8 7/8 1/2 1.89 0.48 0.76 1.13 1-1/8 6,000 -

T12AN12FC 3/4 1 1/16 3/4 2.06 0.61 0.86 1.05 1-3/8 4,800 2,600

T12AN8FC 3/4 1 1/16 1/2 1.91 0.61 0.86 1.20 1-1/8 5,400 -

T16AN16FC

T20AN20FC
1

1 1/4
1 5/16

1 5/8
1

1-1/4
2.35

2.49
0.84

1.08
0.91

0.96
1.46

1.53
1-5/8

2
3,600

3,000
1,950

- 33
T24AN24FC 1 1/2 1 7/8 1-1/2 2.62 1.31 1.08 1.54 2-3/8 2,400 -

T32AN32FC 2 2 1/2 2 2.97 1.78 1.33 1.64 2-7/8 1,800 -

AN 37° Flared Fittings & Adaptes

Dimensions are for reference only and are subject to change.

 A
S L

AN-MC: 37 ° AN x Male NPT

E E1

P P1
H

P1
316 SS Brass
TruFit Tube P Female
A E E1 S L H Working Working
Part # O.D. Thread NPT
Pressure Pressure
Thread
T2AN2MC 1/8 5/16-24 1/8 1.11 0.06 0.19 0.45 0.38 7/16 6,000 -

T3AN2MC 3/16 3/8-24 1/8 1.14 0.13 0.19 0.48 0.38 7/16 6,000 -

T4AN2MC 1/4 7/16-20 1/8 1.22 0.17 0.17 0.55 0.38 1/2 6,000 3,250

T4AN4MC 1/4 7/16-20 1/4 1.42 0.17 0.17 0.55 0.56 9/16 6,000 3,250

T4AN6MC 1/4 7/16-20 3/8 1.44 0.17 0.17 0.55 0.56 3/4 6,000 -

T4AN8MC 1/4 7/16-20 1/2 1.69 0.17 0.17 0.55 0.75 7/8 6,000 -

T5AN2MC 5/16 1/2-20 1/8 1.22 0.23 0.19 0.55 0.38 9/16 6,000 -

T5AN4MC 5/16 1/2 -20 1/4 1.42 0.23 0.23 0.55 0.56 9/16 6,000 -

T6AN2MC 3/8 9/16-18 1/8 1.24 0.30 0.19 0.56 0.38 5/8 6,000 -

T6AN4MC 3/8 9/16-18 1/4 1.43 0.30 0.28 0.56 0.56 5/8 6,000 3,250

T6AN6MC 3/8 9/16-18 3/8 1.44 0.30 0.30 0.56 0.56 3/4 6,000 3,250

T6AN8MC 3/8 9/16-18 1/2 1.69 0.30 0.30 0.56 0.75 7/8 6,000 -

T8AN4MC 1/2 3/4-16 1/4 1.53 0.39 0.19 0.66 0.56 13/16 6,000 -

T8AN6MC 1/2 3/4-16 3/8 1.53 0.39 0.39 0.66 0.56 13/16 6,000 3,250

T8AN8MC 1/2 3/4-16 1/2 1.78 0.39 0.39 0.66 0.75 7/8 6,000 3,250

T8AN12MC 1/2 3/4-16 3/4 1.85 0.39 0.39 0.66 0.75 1 1/8 4,800 -

T10AN8MC 5/8 7/8-14 1/2 1.89 0.48 0.48 0.76 0.75 15/16 6,000 -

T10AN12MC 5/8 7/8-14 3/4 1.95 0.48 0.48 0.76 0.75 1 1/8 4,800 -

T12AN8MC 3/4 1 1/16-12 1/2 2.06 0.61 0.53 0.86 0.75 1 1/8 5,400 -

T12AN12MC 3/4 1 1/16-12 3/4 2.06 0.61 0.61 0.86 0.75 1 1/8 4,800 2,600

T12AN16MC 3/4 1 1/16-12 1 2.25 0.61 0.61 0.86 0.94 1 3/8 3,600 -

T14AN12MC 7/8 1 3/16 -12 3/4 2.09 0.72 0.72 0.86 0.75 1 1/4 4,200 -

T16AN12MC 1 1 5/16-12 3/4 2.11 0.84 0.72 0.91 0.75 1 3/8 4,200 -

T16AN16MC 1 1 5/16-12 1 2.30 0.84 0.84 0.91 0.94 1 3/8 3,600 1,950

T20AN20MC 1-1/4 1 5/8-12 1 1/4 2.45 1.08 1.08 0.96 0.97 1 11/16 3,000 -

T24AN24MC 1-1/2 1 7/8-12 1 1/2 2.68 1.31 1.31 1.08 1.00 2 2,400 -

T32AN32MC 2 2 1/2-12 2 3.11 1.78 1.78 1.33 1.03 2 5/8 1,800 -

TruFit 10K
T2AN4MC-10K 1/8 5/16 - 24 1/4 - 18 1.32 0.06 0.25 0.45 0.57 9/16 10,000 -

T4AN4MC-10K 1/4 7/16 – 20 1/4 - 18 1.42 0.17 0.25 0.55 0.57 9/16 10,000 -

T4AN6MC-10K 1/4 7/16 – 20 3/8 - 18 1.42 0.17 0.17 0.55 0.57 3/4 10,000 -

T4AN8MC-10K 1/4 7/16 – 20 1/2 - 14 1.68 0.17 0.17 0.55 0.76 7/8 10,000 -

T6AN4MC-10K 3/8 9/16 – 18 1/4 - 18 1.43 0.26 0.25 0.56 0.57 5/8 10,000 -

T6AN6MC-10K 3/8 9/16 – 18 3/8 - 18 1.43 0.26 0.26 0.56 0.57 3/4 10,000 -

T6AN8MC-10K 3/8 9/16 – 18 1/2 - 14 1.69 0.26 0.41 0.56 .076 7/8 10,000 -

T8AN4MC-10K 1/2 3/4 - 16 1/4 - 18 1.53 0.36 0.25 0.66 0.57 13/16 10,000 -

T8AN6MC-10K 1/2 3/4 - 16 3/8 - 18 1.53 0.36 0.33 0.66 0.57 13/16 10,000 -
T8AN8MC-10K 1/2 3/4 - 16 1/2 - 14 1.79 0.36 0.36 0.66 0.76 7/8 10,000 -

T8AN12MC-10K 1/2 3/4 - 16 3/4 - 14 1.85 0.36 0.36 0.66 0.76 1-1/8 10,000 -

T12AN8MC-10K 3/4 1-1/16 – 12 1/2 - 14 2.06 0.52 0.41 0.86 0.76 1-1/8 10,000 -

T12AN12MC-10K 3/4 1-1/16 – 12 3/4 - 14 2.06 0.52 0.52 0.86 0.76 1-1/8 10,000 -

T16AN6MC-10K 1 1-5/16 - 12 3/8 - 18 1.92 0.67 0.33 0.91 0.57 1-3/8 10,000 -

T16AN8MC-10K 1 1-5/16 - 12 1/2 - 14 2.11 0.67 0.41 0.91 0.76 1-3/8 10,000 -

T16AN12MC-10K 1 1-5/16 – 12 3/4 - 14 2.11 0.67 0.52 0.91 0.76 1-3/8 10,000 -

34 T16AN16MC-10K 1 1-5/16 – 12 1 2.30 0.67 0.67 0.91 0.95 1-3/8 10,000 -

 A
S L

AN-MST: 37 ° AN x Male SAE

AN 37° Flared Fittings & Adaptes

E E1

P P1
H
P1 Male 316 SS
TruFit Tube P
SAE A E E1 S L H Working
Part # O.D. Thread
Thread Pressure
T2AN2MST 1/8 5/16-24 5/16 1.06 0.06 0.06 0.45 0.30 7/16 6,000

T3AN3MST 3/16 3/8-24 3/8 1.10 0.13 0.13 0.48 0.30 1/2 6,000

T4AN4MST 1/4 7/16-20 7/16 1.23 0.17 0.17 0.55 0.36 9/16 6,000

T4AN5MST 1/4 7/16 – 20 1/2 1.23 0.17 0.23 0.55 0.36 5/8 6,000

T4AN6MST 1/4 7/16 – 20 9/16 1.29 0.17 0.30 0.55 0.39 11/16 6,000

T4AN8MST 1/4 7/16-20 3/4 1.37 0.17 0.39 0.55 0.44 7/8 6,000

T5AN5MST 5/16 1/2-20 1/2 1.23 0.23 0.23 0.55 0.36 5/8 6,000

T6AN6MST 3/8 9/16-18 9/16 1.30 0.30 0.30 0.56 0.36 11/16 6,000

T6AN4MST 3/8 9/16-18 7/16 1.29 0.30 0.17 0.56 0.36 5/8 6,000

T6AN8MST 3/8 9/16-18 3/4 1.38 0.30 0.39 0.56 0.44 7/8 6,000

T6AN10MST 3/8 9/16-18 7/8 1.50 0.30 0.48 0.56 0.50 1 6,000

T8AN8MST 1/2 3/4-16 3/4 1.48 0.39 0.39 0.66 0.44 7/8 6,000

T8AN6MST 1/2 3/4-16 9/16 1.38 0.39 0.30 0.66 0.39 13/16 6,000

T8AN10MST 1/2 3/4-16 7/8 1.60 0.39 0.48 0.66 0.50 1 6,000

T8AN12MST 1/2 3/4-16 1 1/16 1.76 0.39 0.61 0.66 0.59 1 1/4 6,000

T10AN8MST 5/8 7/8 – 14 3/4 1.60 0.48 0.39 0.76 0.44 15/16 6,000

35
T10AN10MST 5/8 7/8 – 14 7/8 1.70 0.48 0.48 0.76 0.50 1 1/4 6,000

T10AN12MST 5/8 7/8 -14 1 1/16 1.86 0.48 0.61 0.76 0.56 1 1/4 6,000

T12AN8MST 3/4 1 1/16-12 3/4 1.76 0.61 0.39 0.86 0.44 1-1/8 6,000

T12AN10MST 3/4 1 1/16-12 7/8 1.86 0.61 0.48 0.86 0.50 1 1/8 6,000

T12AN12MST 3/4 1 1/16-12 1 1/16 1.97 0.61 0.61 0.86 0.56 1 1/4 6,000

T12AN14MST 3/4 1 1/16--12 1 3/16 1.96 0.61 0.61 0.86 0.59 1 3/8 5,400

T12AN16MST 3/4 1 1/16-12 1 5/16 1.99 0.61 0.84 0.86 0.59 1 1/2 5,400

T16AN16MST 1 1 5/16-12 1 5/16 2.04 0.84 0.84 0.91 0.59 1 1/2 5,400

T16AN12MST 1 1 5/16-12 1 1/16 1.99 0.84 0.61 0.91 0.59 1 3/8 5,400

T20AN20MST 1 1/4 1 5/8-12 1 5/8 2.17 1.08 1.08 0.96 0.59 1 7/8 3,600

T24AN24MST 1 1/2 1 7/8-12 1 7/8 2.37 1.31 1.31 1.00 0.59 2 1/8 2,400

T32AN32MST 2 2 1/2-12 2 1/2 2.78 1.78 1.78 1.03 0.59 2 3/4 1,800

TruFit 10K
T4AN4MST-10K 1/4 7/16 – 20 7/16 1.23 0.17 0.17 0.55 0.36 9/16 10,000

T4AN6MST-10K 1/4 7/16 – 20 9/16 1.29 0.17 0.26 0.55 0.39 11/16 10,000

T6AN4MST-10K 3/8 9/16 - 18 7/16 1.27 0.26 0.17 0.56 0.36 5/8 10,000

T6AN6MST-10K 3/8 9/16 – 18 9/16 1.30 0.26 0.26 0.56 0.39 11/16 10,000

T8AN8MST-10K 1/2 3/4 - 16 3/4 1.48 0.36 0.36 0.66 0.44 7/8 10,000
www.mySSP.com

Dimensions are for reference only and are subject to change.

 A
S

P
FC-MRT: Female NPT
E

x Male ISO Tapered P1

H

P P1
E 316 SS Brass
TruFit Female Male ISO
A Minimum S H Working Working
Part # NPT Tapered
Opening Pressure Pressure
Thread Thread
T2FC2MRT 1/8 1/8 1.04 0.19 0.38 5/8 6550 3250

T4FC4MRT 1/4 1/4 1.39 0.28 0.56 3/4 6650 3350

T6FC6MRT 3/8 3/8 1.44 0.41 0.56 7/8 5350 2650

T8FC8MRT 1/2 1/2 1.69 0.53 0.75 1 1/8 4950 2450

T12FC12MRT 3/4 3/4 1.93 0.72 0.75 1 3/8 4650 2350

T16FC16MRT 1 1 2.37 0.94 0.94 1 5/8 4450 2250

TruFit 10K
T2FC2MRT-10K 1/8 1/8 1.04 0.17 0.38 5/8 10,000 -

T4FC4MRT-10K 1/4 1/4 1.39 0.24 0.56 3/4 10,000 -

T6FC6MRT-10K 3/8 3/8 1.44 0.32 0.56 7/8 10,000 -

T8FC8MRT-10K 1/2 1/2 1.69 0.40 0.75 1 1/8 10,000 -

T12FC12MRT-10K 3/4 3/4 1.93 0.53 0.75 1 3/8 10,000 -

T16FC16MRT-10K 1 1 2.37 0.67 0.94 1 5/8 10,000 -

A
S L

MC-MRT: Male NPT x E E1

Male ISO Tapered P P

H HEX

P P1
E 316 SS Brass
TruFit Male Male ISO
A Minimum E1 S L H Working Working
Part # NPT Tapered
Opening Pressure Pressure
Thread Thread
T2MC2MRT 1/8 1/8 1.06 0.19 0.19 0.38 0.38 7/16 10,050 5,050

T4MC4MRT 1/4 1/4 1.45 0.28 0.19 0.56 0.56 5/8 8,050 4,050

T6MC6MRT 3/8 3/8 1.45 0.41 0.41 0.56 0.56 3/4 7,850 3,950

T8MC8MRT 1/2 1/2 1.89 0.53 0.53 0.75 0.75 7/8 7,750 3,850

T12MC12MRT 3/4 3/4 1.96 0.72 0.28 0.75 0.75 1 1/8 7,350 3,650

T16MC16MRT 1 1 2.34 0.94 0.94 0.94 0.94 1 3/8 5,350 2,650

TruFit 10K
T2MC2MRT-10K 1/8-27 1/8-28 1.06 0.19 0.17 0.38 0.38 7/16 10,000 -

T4MC4MRT-10K 1/4-18 1/4-19 1.45 0.24 0.24 0.57 0.56 5/8 10,000 -

T6MC6MRT-10K 3/8-18 3/8-19 1.45 0.32 0.32 0.57 0.56 3/4 10,000 -

T8MC8MRT-10K 1/2-14 1/2-14 1.89 0. 40 0.40 0.76 0.75 7/8 10,000 -

T12MC12MRT-10K 3/4-14 3/4-14 1.96 0.51 0.53 0.76 0.75 1-1/8 10,000 -

T16MC16MRT-10K 1 11-1/2 1-11 2.34 0.67 0.67 0.95 0.94 1-3/8 10,000 -

36
 A
S L

MC-MRS: Male NPT x E

Male ISO Straight P1 P

BSP Fittings & Adapters

H

P1 P
316 SS
TruFit Male Male ISO
A E S L H Working
Part # NPT Straight
Pressure
Thread Thread

T2MC2MRS 1/8 1/8 1.07 0.16 0.38 0.28 9/16 11,400

T4MC4MRS 1/4 1/4 1.37 0.23 0.57 0.45 3/4 6,000
T6MC6MRS 3/8 3/8 1.37 0.3 0.57 0.45 7/8 6,000
T8MC8MRS 1/2 1/2 1.74 0.48 0.76 0.56 1 1/8 6,000
T12MC12MRS 3/4 3/4 1.89 0.66 0.73 0.56 1 3/8 4,800
T16MC16MRS 1 1 2.27 0.84 0.95 0.73 1 3/4 3,600

Trufit 10K

T2MC2MRS-10K 1/8-28 1/8 1.09 0.17 0.39 0.28 9/16 10,000

T2MC4MRS-10K 1/4-19 1/8 1.25 0.17 0.39 0.44 3/4 10,000

T4MC2MRS-10K 1/8-28 1/4 1.27 0.17 0.57 0.28 9/16 10,000
T4MC4MRS-10K 1/4-19 1/4 1.45 0.23 0.57 0.44 3/4 10,000
T4MC6MRS-10K 3/8-19 1/4 1.48 0.25 0.57 0.44 7/8 10,000
T4MC8MRS-10K 1/2-14 1/4 1.58 0.23 0.57 0.56 1-1/16 10,000
T6MC4MRS-10K 1/4-19 3/8 1.47 0.23 0.57 0.44 3/4 10,000
T6MC6MRS-10K
T6MC8MRS-10K
3/8-19
1/2-14
3/8
3/8
1.48
1.56
0.32
0.32
0.57
0.57
0.44
0.56
7/8
1-1/16
10,000
10,000
37
T8MC4MRS-10K 1/4-19 1/2 1.62 0.23 0.76 0.44 7/8 10,000
T8MC6MRS-10K 3/8-19 1/2 1.67 0.32 0.76 0.44 7/8 10,000
T8MC8MRS-10K 1/2-14 1/2 1.45 0.40 0.76 0.56 1-1/16 10,000
T8MC10MRS-10K 5/8-14 1/2 1.75 0.41 0.76 0.56 1-5/16 10,000
T8MC12MRS-10K 3/4-14 1/2 1.83 0.41 0.76 0.62 1-5/16 10,000
T12MC8MRS-10K 1/2-14 3/4 1.82 0.53 0.76 0.56 1-1/8 10,000
T12MC12MRS-10K 3/4-14 3/4 1.93 0.53 0.76 0.62 1-5/16 10,000
T12MC16MRS-10K 1-11 3/4 2.03 0.53 0.76 0.72 1-5/8 10,000
T16MC8MRS-10K 1/2-14 1 2.05 0.47 0.95 0.56 1-3/8 10,000
T16MC12MRS-10K 3/4-14 1 2.13 0.53 0.95 0.62 1-3/8 10,000
T16MC16MRS-10K 1-11 1 2.23 0.67 0.95 0.72 1-5/8 10,000
T16MC20MRS-10K 1-1/4 - 11 1 2.25 0.67 0.95 0.73 2 10,000

DW-BSPP: Bonded Washer

TruFit
A E L
Part #
4DW-BSPP 0.81 0.54 0.08 * Bonded washer comes
standard as a stainless steel
www.mySSP.com

L 6DW-BSPP 0.94 0.68 0.08

washer with FKM inner ring.
8DW-BSPP 1.13 0.85 0.10

12DW-BSPP 1.38 1.06 0.10

A E 16DW-BSPP 1.69 1.33 0.10
 A
S
FC-MRS: Female NPT x E
Male ISO Straight P
P1
H

P P1
316 SS
TruFit Female Male ISO
A E S H Working
Part # NPT Straight
Pressure
Thread Thread
T2FC2MRS 1/8 1/8 1.33 0.23 0.45 3/4 6,500

T4FC4MRS 1/4 1/4 1.33 0.23 0.45 3/4 6,000

T6FC6MRS 3/8 3/8 1.33 0.30 0.45 7/8 6,000

T8FC8MRS 1/2 1/2 1.70 0.48 0.56 1-1/8 6,000

T12FC12MRS 3/4 3/4 1.82 0.66 0.56 1-3/8 4,200

T16FC16MRS 1 1 1.93 0.84 0.73 1-3/4 3,600

A
S

FRS-MC: Female ISO Straight P E

x Male NPT P1
H

P P1
316 SS
TruFit Female Male
A E S H Working
Part # ISO Straight NPT
Pressure
Thread Thread
T4FRS4MC 1/4 1/4 1.42 0.28 0.57 3/4 7,200

T6FRS6MC 3/8 3/8 1.47 0.41 0.57 7/8 7,200

T8FRS8MC 1/2 1/2 1.89 0.53 0.76 1 1/8 6,000

TruFit 10K
T4FRS4MC-10K 1/4 1/4 1.50 0.24 0.57 13/16 10,000

T6FRS6MC-10K 3/8 3/8 1.54 0.32 0.57 1 10,000

T8FRS8MC-10K 1/2 1/2 1.88 0.40 0.76 1-1/4 10,000

38 Dimensions are for reference only and are subject to change.

More SSP Products

BSP Fittings & Adapters

Tube Fittings Valves
Duolok and Griplok two- The FloLok valve offer-
ferrule and Unilok® single ing includes ball, check,
ferrule tube fittings provide metering, needle, toggle,
leak-tight installation even plug, bleed, and purge
when intermixed with Swa- valves for pressures up
gelok®, Hoke Gyrolok® and to 10,000 psig.
Parker CPITM fittings.

Tubing Pipe Fittings

SSP offers straight and TruFit and TruFit
coiled seamless 316 stain- 10K pipe fittings are
less steel instrumentation
39
available in a wide range
tubing for instrumentation, of weld, threaded and
process and utility appli- flared connections.
cations.

Filters Hose
FloLok in-line and tee- TruFit PTFE-lined and
type filters trap particles flexible metal core hose
to clean sample fluids assemblies are used in
and protect sensitive a variety of instrumen-
process and analytical tation, utility, biopharm
instrumentation compo- and other applications.
nents and equipment.

Tools & Quick Connects

Accessories SSP offers single-end
SSP TurnPro professional shutoff, double-end shut
hand tools, power tools and off, and full-flow quick
installation training make connects for instru-
www.mySSP.com

quality tube system instal- mentation and process

lation faster and easier. applications.
 Founded 1926
Privately owned, third generation business
Modern single-site vertically integrated manufacturing facility
DFARS-compliant raw material
ISO 9001 quality management system
Limited Lifetime Warranty

The Only
100% American Made
Instrument Valves & Fittings

8250 Boyle Parkway • Twinsburg, OH 44087

330-425-4250 • www.mySSP.com

©2020 SSP Fittings Corp. All rights reserved. TFPC-22A