PHOTOCOUPLER

PS2701-1
HIGH ISOLATION VOLTAGE
−NEPOC Series−
SOP MULTI PHOTOCOUPLER

DESCRIPTION
The PS2701-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon
phototransistor.
This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light.
It is designed for high density mounting applications.

FEATURES
• High isolation voltage (BV = 3 750 Vr.m.s.)
• SOP (Small Outline Package) type
• High-speed switching (tr = 3 µs TYP., tf = 5 µs TYP.)
• Ordering number of taping product: PS2701-1-F3, F4
• UL approved: File No. E72422 (S)
• VDE0884 approved (Option)

APPLICATIONS
• Hybrid IC
• Measuring instruments
• Power supply
• Programmable logic controllers

ORDERING INFORMATION (Solder Contains Lead)

Part Number Package Safety Standard Approval

PS2701-1 4-pin SOP Standard products

• UL approved

PS2701-1-V 4-pin SOP VDE0884 approved products (Option)

ORDERING INFORMATION (Pb-Free)

Part Number Package Safety Standard Approval

PS2701-1-A 4-pin SOP Standard products

• UL approved

PS2701-1-V-A 4-pin SOP VDE0884 approved products (Option)

Document No. PN10240EJ01V0DS (1st edition) The mark  shows major revised points.
(Previous No. P11306EJ6V0DS00)
Date Published February 2003 CP(K)
 PS2701-1

PACKAGE DIMENSIONS (in millimeters)

PS2701-1
4.5±0.5
TOP VIEW
4 3
1. Anode
2. Cathode
3. Emitter
4. Collector
1 2

7.0±0.3
4.4

0.15 +0.10
–0.05
2.1±0.2
2.0
0.1±0.1

2.54 0.5±0.3
0.4 +0.10
–0.05 0.25 M

2 Data Sheet PN10240EJ01V0DS

 PS2701-1

ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)

Parameter Symbol Ratings Unit

Diode Forward Current (DC) IF 50 mA

Reverse Voltage VR 6 V

Power Dissipation Derating ∆PD/°C 0.8 mW/°C

Power Dissipation PD 80 mW
*1
Peak Forward Current IFP 1 A

Transistor Collector to Emitter Voltage VCEO 40 V

Emitter to Collector Voltage VECO 6 V

Collector Current IC 80 mA

Power Dissipation Derating ∆PC/°C 1.5 mW/°C

Power Dissipation PC 150 mW

*2
Isolation Voltage BV 3 750 Vr.m.s.

Operating Ambient Temperature TA –55 to +100 °C

Storage Temperature Tstg –55 to +150 °C

*1 PW = 100 µs, Duty Cycle = 1 %

*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output

Data Sheet PN10240EJ01V0DS 3

 PS2701-1

ELECTRICAL CHARACTERISTICS (TA = 25 °C)

Parameter Symbol Conditions MIN. TYP. MAX. Unit

Diode Forward Voltage VF IF = 5 mA 1.1 1.4 V

Reverse Current IR VR = 5 V 5 µA
Terminal Capacitance Ct V = 0 V, f = 1 MHz 30 pF

Transistor Collector to Emitter Dark ICEO IF = 0 mA, VCE = 40 V 100 nA

Current

Coupled Current Transfer Ratio CTR IF = 5 mA, VCE = 5 V 50 100 300 %

*1
(IC/IF)
Collector Saturation VCE (sat) IF = 10 mA, IC = 2 mA 0.3 V
Voltage

Ω
11
Isolation Resistance RI-O VI-O = 1 kVDC 10

Isolation Capacitance CI-O V = 0 V, f = 1 MHz 0.4 pF

*2
Rise Time tr VCC = 5 V, IC = 2 mA, RL = 100 Ω 3 µs
*2
Fall Time tf 5

*1 CTR rank
P: 150 to 300 (%)
L: 100 to 300 (%)
M: 50 to 150 (%)
*2 Test circuit for switching time

Pulse input VCC

PW = 100 µs,
Duty cycle = 1/10
IF VOUT
50 Ω RL = 100 Ω

4 Data Sheet PN10240EJ01V0DS

 PS2701-1

TYPICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified)

DIODE POWER DISSIPATION vs. TRANSISTOR POWER DISSIPATION vs.

AMBIENT TEMPERATURE AMBIENT TEMPERATURE
100 200

Transistor Power Dissipation PC (mW)

Diode Power Dissipation PD (mW)

75 150

1.5 mW/˚C

50 100

25 50

0 25 50 75 100 0 25 50 75 100

Ambient Temperature TA (˚C) Ambient Temperature TA (˚C)

FORWARD CURRENT vs. COLLECTOR CURRENT vs.

FORWARD VOLTAGE COLLECTOR TO EMITTER VOLTAGE
100 50

IF = 30 mA
40
Collector Current IC (mA)

TA = +100 ˚C
Forward Current IF (mA)

10
+75 ˚C
+50 ˚C
30 20 mA
1 15 mA
+25 ˚C
0 ˚C 20
–25 ˚C 10 mA
0.1 –55 ˚C
10
5 mA

0.01
0.6 0.8 1.0 1.2 1.4 1.6 0 2 4 6 8 10

Forward Voltage VF (V) Collector to Emitter Voltage VCE (V)

COLLECTOR TO EMITTER DARK COLLECTOR CURRENT vs.

CURRENT vs. AMBIENT TEMPERATURE COLLECTOR SATURATION VOLTAGE
Collector to Emitter Dark Current ICEO (nA)

10 000 50
IF = 25 mA
20
1 000 10 mA
Collector Current IC (mA)

VCE = 40 V
24 V 10
10 V 5 mA
100 5

2 2 mA
10 1
1 mA
0.5
1
0.2

0.1 0.1
–60 –40 –20 0 20 40 60 80 100 0.0 0.2 0.4 0.6 0.8 1.0

Ambient Temperature TA (˚C) Collector Saturation Voltage VCE (sat) (V)

Data Sheet PN10240EJ01V0DS 5

 PS2701-1

NORMALIZED CURRENT TRANSFER CURRENT TRANSFER RATIO vs.

RATIO vs. AMBIENT TEMPERATURE FORWARD CURRENT
;;;;;;;;;;;;;;;;
1.2

;;;;;;;;;;;;;;;;
300
Normalized Current Transfer Ratio CTR

VCE = 5 V

;;;;;;;;;;;;;;;;

Current Transfer Ratio CTR (%)

1.0 250

;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;
0.8 200

0.6 150

0.4 100

0.2 Normalized to 1.0 50

at TA = 25 ˚C,
IF = 5 mA, VCE = 5 V
0.0 0
–50 –25 0 25 50 75 100 0.05 0.1 0.5 1 5 10 50

Ambient Temperature TA (˚C) Forward Current IF (mA)

SWITCHING TIME vs.

LOAD RESISTANCE FREQUENCY RESPONSE
100 1.2
VCC = 5 V,
50 IC = 2 mA
1.0
ton
Switching Time t ( µ s)

Normalized Gain GV

toff RL = 1 kΩ
10 0.8
510 Ω
5 300 Ω
td 0.6 100 Ω
ts
1 0.4
0.5
0.2

0.1 0.0
50 100 200 500 1k 2k 2 5 10 20 50 100 200 500

Load Resistance RL (Ω) Frequency f (kHz)

SWITCHING TIME vs.

LOAD RESISTANCE LONG TERM CTR DEGRADATION
1 000 1.2
IF = 5 mA, VCC = 5 V, tf
500 CTR = 169 %
1.0
ts
Switching Time t ( µ s)

100
CTR (Relative Value)

50 0.8
IF = 1 mA, TA = 25 ˚C
IF = 5 mA, TA = 25 ˚C
10 0.6
IF = 20 mA, TA = 25 ˚C
5 tr IF = 20 mA, TA = 60 ˚C
td 0.4
1
0.5 0.2

0.1 0.0
100 500 1 k 5 k 10 k 50 k 100 k 1 102 103 104 105 106

Load Resistance RL (Ω) Time (Hr)

Remark The measurement of TYPICAL CHARACTERISTICS are only for reference, not guaranteed.

6 Data Sheet PN10240EJ01V0DS

 PS2701-1

TAPING SPECIFICATIONS (in millimeters)

Outline and Dimensions (Tape)

1.75±0.1
2.0±0.05
4.0±0.1 1.5+0.1
–0
2.9 MAX.

5.5±0.05

12.0±0.2
7.4±0.1
1.55±0.1 4.6±0.1 2.4±0.1

8.0±0.1 0.3

Tape Direction

PS2701-1-F3 PS2701-1-F4

Outline and Dimensions (Reel)

2.0±0.5

2.0±0.5
φ13.0±0.2
φ 330±2.0
φ 100±1.0
φ 13.0±0.2

R 1.0
φ 21.0±0.8
13.5±1.0

17.5±1.0

11.9 to 15.4
Outer edge of
Packing: 3 500 pcs/reel flange

Data Sheet PN10240EJ01V0DS 7

 PS2701-1

NOTES ON HANDLING

1. Recommended soldering conditions

(1) Infrared reflow soldering
• Peak reflow temperature 260°C or below (package surface temperature)
• Time of peak reflow temperature 10 seconds or less
• Time of temperature higher than 220°C 60 seconds or less
• Time to preheat temperature from 120 to 180°C 120±30 s
• Number of reflows Three
• Flux Rosin flux containing small amount of chlorine (The flux with a
maximum chlorine content of 0.2 Wt% is recommended.)

Recommended Temperature Profile of Infrared Reflow

Package Surface Temperature T (˚C)

(heating)
to 10 s
260˚C MAX.
220˚C
to 60 s

180˚C

120˚C
120±30 s
(preheating)

Time (s)

(2) Wave soldering

• Temperature 260°C or below (molten solder temperature)
• Time 10 seconds or less
• Preheating conditions 120°C or below (package surface temperature)
• Number of times One (Allowed to be dipped in solder including plastic mold portion.)
• Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine
content of 0.2 Wt% is recommended.)

(3) Cautions
• Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.

2. Cautions regarding noise

Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output side may enter the on state, even if the voltage is within the absolute
maximum ratings.

8 Data Sheet PN10240EJ01V0DS

 PS2701-1

USAGE CAUTIONS
1. Protect against static electricity when handling.
2. Avoid storage at a high temperature and high humidity.

Data Sheet PN10240EJ01V0DS 9

 PS2701-1

SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)

Parameter Symbol Speck Unit

Application classification (DIN VDE 0109)

for rated line voltages ≤ 300 Vr.m.s. IV

for rated line voltages ≤ 600 Vr.m.s. III

Climatic test class (DIN IEC 68 Teil 1/09.80) 55/100/21

Dielectric strength

Maximum operating isolation voltage UIORM 710 Vpeak

Test voltage (partial discharge test, procedure a for type test and random test) Upr 850 Vpeak

Upr = 1.2 × UIORM, Pd < 5 pC

Test voltage (partial discharge test, procedure b for all devices test) Upr 1 140 Vpeak
Upr = 1.6 × UIORM, Pd < 5 pC

Highest permissible overvoltage UTR 6 000 Vpeak

Degree of pollution (DIN VDE 0109) 2

Clearance distance >5 mm

Creepage distance >5 mm

Comparative tracking index (DIN IEC 112/VDE 0303 part 1) CTI 175

Material group (DIN VDE 0109) III a

Storage temperature range Tstg –55 to +150 °C

Operating temperature range TA –55 to +100 °C

Isolation resistance, minimum value

VIO = 500 V dc at TA = 25 °C Ω
12
Ris MIN. 10

VIO = 500 V dc at TA MAX. at least 100 °C Ω

11
Ris MIN. 10

Safety maximum ratings

(maximum permissible in case of fault, see thermal derating curve)

Package temperature Tsi 150 °C

Current (input current IF, Psi = 0) Isi 200 mA

Power (output or total power dissipation) Psi 300 mW

Isolation resistance

VIO = 500 V dc at TA = 175 °C (Tsi) Ω

9
Ris MIN. 10

10 Data Sheet PN10240EJ01V0DS

 4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279

Subject: Compliance with EU Directives

CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.

CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.

This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.

Restricted Substance Concentration Limit per RoHS Concentration contained

per RoHS (values are not yet fixed) in CEL devices
-A -AZ
Lead (Pb) < 1000 PPM
Not Detected (*)
Mercury < 1000 PPM Not Detected

Cadmium < 100 PPM Not Detected

Hexavalent Chromium < 1000 PPM Not Detected

PBB < 1000 PPM Not Detected

PBDE < 1000 PPM Not Detected

If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.

Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.