Scribd Logo
Upload

Welcome to Scribd!

  • 156 views

    Urit 5380 Protocolo Bidirecional

    Uploaded by

    Manuais Interfaceamento 2
    The document describes bidirectional LIS communication between an instrument and LIS system using HL7 protocol. It provides an example flow: 1) The instrument scans a barcode and sends an inquiry message to LIS. 2) LIS returns either a response with corresponding sample information or a message indicating no match. 3) If a match is found, LIS sends additional data messages with details to the instrument. 4) The instrument replies to confirm receiving the message. The document also notes that the bidirectional feature only works with HL7 protocol and lists some attention points like automatically suspending if sample information cannot be obtained until it is received from LIS again.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Urit 5380 Protocolo Bidirecional

    Uploaded by

    Manuais Interfaceamento 2
    156 views5 pages
    The document describes bidirectional LIS communication between an instrument and LIS system using HL7 protocol. It provides an example flow: 1) The instrument scans a barcode and sends an inquiry message to LIS. 2) LIS returns either a response with corresponding sample information or a message indicating no match. 3) If a match is found, LIS sends additional data messages with details to the instrument. 4) The instrument replies to confirm receiving the message. The document also notes that the bidirectional feature only works with HL7 protocol and lists some attention points like automatically suspending if sample information cannot be obtained until it is received from LIS again.

    Original Title

    URIT 5380 PROTOCOLO BIDIRECIONAL

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes bidirectional LIS communication between an instrument and LIS system using HL7 protocol. It provides an example flow: 1) The instrument scans a barcode and sends an inquiry message to LIS. 2) LIS returns either a response with corresponding sample information or a message indicating no match. 3) If a match is found, LIS sends additional data messages with details to the instrument. 4) The instrument replies to confirm receiving the message. The document also notes that the bidirectional feature only works with HL7 protocol and lists some attention points like automatically suspending if sample information cannot be obtained until it is received from LIS again.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    156 views5 pages

    Urit 5380 Protocolo Bidirecional

    Uploaded by

    Manuais Interfaceamento 2
    The document describes bidirectional LIS communication between an instrument and LIS system using HL7 protocol. It provides an example flow: 1) The instrument scans a barcode and sends an inquiry message to LIS. 2) LIS returns either a response with corresponding sample information or a message indicating no match. 3) If a match is found, LIS sends additional data messages with details to the instrument. 4) The instrument replies to confirm receiving the message. The document also notes that the bidirectional feature only works with HL7 protocol and lists some attention points like automatically suspending if sample information cannot be obtained until it is received from LIS again.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    1 Bidirectional LIS function

    Bidirectional Lis function is off by default. Find Settings-Transmit-Connect Lis to


    chose Enable bothway Lis when it’s HL7 protocol, shown in the figure：

    It is important to note that this feature only takes effect when the protocol is HL7, other
    protocols do not support it. The bidirectional LIS protocol of the software follows the
    internationally accepted HL7 agreement, and the specific process is shown as follows:

    1
    2
    1.1 Bidirectional LIS communication example

    The simple flow of bidirectional communication is shown in the figure below

    When the instrument scans the bar code, it will send an inquiry message to LIS with the
    bar code ID:

    The LIS will return QCK ^ Q02 message as a reply, if the response has a
    corresponding sample, the message is:

    If not, the massage is：

    When the LIS server has a corresponding sample cases, will return the query
    response QCK ^ Q02, then send data messages DSR ^ Q03, as shown in the figure below:

    3
    Date of birth must be like: yyyyMMddHHmmss。
    In analysis mode，cbc^^^means cbc mode，cbc^5diff^^means cbc+5diff mode.
    If it send a massage for no corresponding sample QCK ^ Q02, don't have to send the
    DSR massage.
    After receiving the DSR message, the instrument will reply to confirm that the
    message like:

    This is an example of a complete bidirectional LIS communication.

    2 Attentions

    1、 When the bidirectional LIS function is turned on, if the instrument cannot get the
    sample information due to unexpected errors (such as LIS suddenly dropped,
    and the scanner cannot scan the bar code number, etc.), the instrument will
    automatically suspend until the sample information is obtained.
    2、 How to get sample information: open the multi-sample status diagram window,
    click the corresponding test tube, and a detailed test tube information window will
    pop up, and then click the "get information again" button to get the sample
    information, as shown in the figure:

    4
    3、Samples that have obtained sample information cannot be re-obtained.

    You might also like