The Pencil Hardness Tester is used to determine the hardness of coatings. It works by using graphite pencils of varying hardness and pressing them at a 45 degree angle against the coated surface. The hardness value of the pencil that marks the coating determines the hardness rating. The tester maintains a constant 7.5N force and 45 degree angle for accurate, consistent results. It is portable for use in labs and construction sites.
The Pencil Hardness Tester is used to determine the hardness of coatings. It works by using graphite pencils of varying hardness and pressing them at a 45 degree angle against the coated surface. The hardness value of the pencil that marks the coating determines the hardness rating. The tester maintains a constant 7.5N force and 45 degree angle for accurate, consistent results. It is portable for use in labs and construction sites.
The Pencil Hardness Tester is used to determine the hardness of coatings. It works by using graphite pencils of varying hardness and pressing them at a 45 degree angle against the coated surface. The hardness value of the pencil that marks the coating determines the hardness rating. The tester maintains a constant 7.5N force and 45 degree angle for accurate, consistent results. It is portable for use in labs and construction sites.
The Pencil Hardness Tester is used to determine the hardness of coatings. It works by using graphite pencils of varying hardness and pressing them at a 45 degree angle against the coated surface. The hardness value of the pencil that marks the coating determines the hardness rating. The tester maintains a constant 7.5N force and 45 degree angle for accurate, consistent results. It is portable for use in labs and construction sites.
The Pencil Hardness Tester is a precise and reliable tool for evaluating the hardness of a coating.
It utilizes the varying hardness values of graphite pencils to determine the
hardness rating of a coating. To begin the testing process, the pencil lead must first be sharpened with a special sharpener and abrasive paper. The lead is then inserted into the tester and pushed over the smooth and flat coated surface. The hardness value of the pencil that marks the coating is then used to determine the hardness rating of the coating.
The SIIN-501 is designed to ensure that the cylindrical pencil lead is
maintained at a constant angle of 45° and exerts a force of 7.5N (750 gm) for accurate and consistent results.
Features: Small volume, light weight. Use at the laboratory and construction site.
Technical Parameters: Load on the point of pencil : 750±5g. Constant angle of 45°
Conforms To: ASTM D 3363,BS 3900-E19,EN 13523-4,ISO 15184,JIS K 5600-5-4, IS:101.
Supplied With : Certificate traceable to
National Standards & Set of 12 Staedtler Pencils
Pencil Hardness Tester
Load on the point of pencil 750±5g. Angle 45° Standards ASTM D 3363,BS 3900-E19,EN 13523-4,ISO 15184,JIS K 5600-5-4, IS:101.
