IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308

DESIGN AND IMPLEMENTATION OF ARDUINO BASED 3D

PRINTING USING FDM TECHNIQUE

Mary B. Halli1, Narayana Swamy R2

1
PG Student (VLSI Design and Embedded System), ECE, T. John Institute of Technology, Karnataka, India
2
Associate Professor (VLSI Design and Embedded System), ECE, T. John Institute of Technology, Karnataka, India

Abstract
Additive manufacturing is also known as 3D printing. 3D printing is achieved by translating the digital code into visible solid 3D
model. Successive layers and printed one after the other by laying down the material (Additive Manufacturing). The print
materials can be plastic, nylon, metal and many more, we can find its application in the field of aerospace, automation industries,
manufacture and architectural engineering, construction of design industries, dental & medical fields and many more. The
application in many of these fields is very rapid and also cost effective. The use of 3D printing is beneficial to the industries like
medical, aerospace, manufacturing, automation and also consumer products in wider range. Thus providing the exciting
technology to look forward for this paper seeking to explore the working procedure of 3D printing and its applications in today’s
world and also for the future.

Keywords: 3D Printing, FDM Technique, Rapid Prototyping and Auto Bed Levelling.
--------------------------------------------------------------------***----------------------------------------------------------------------

1. INTRODUCTION 1.2 Scope of the study

In recent years the 3-Dimensional Printing has become one The 3d printing technology has become one of the most
of the rapid technological trend in today‟s world. The important research study in this new era. The production and
growth is so rapid that it can also be called as the “Era of 3D its areas of concentration are uncountable because it helps
Printer”. This is one of the technology which is said to be the production industry and rapid prototyping industries to
affected and can be considered as the boon to the human reduce the amount of time involved in the product and also
history than compared to any other fields. In this the cost. Hence for this purpose. Our research has been
revolutionary method, the inkjet technology separate scaled down to the applications and as well as the
printing the parts and each part will be glued to make 3D importance and benefits of 3d printing to rapid prototyping.
model. This was very tedious task and time consuming with
minimum accuracy. So to overcome this problem the 3d 2. LITERATURE SURVEY
printer with SLA technology was invented. In the year 1984
Charles Hull was the first person to invent to 3d printing The paper provides the information about the systematic
using SLA (Stereolithographic apparatus) method. It is the reviews in this 3D printing field based on the academic
additive manufacturing where the material is added layer by research publication and also providing the overview of the
layer as per the design. The physical 3d model is developed efforts taken in research development. The 3D printing has
by translating the digital code into the visible code pattern. number of processes and different technologies offering
The SLA printing is also called as “Rapid Prototyping” capabilities to develop the parts and the products with
because it is the mechanism where the blueprint of the different materials. Mainly these technology and processes
image is designed and developed in the computer. This depends on the production methods that is carried out like
digital code is translated into the solid visible pattern. The Additive manufacturing which has layer by layer process or
design can either be developed in CAD program or can be subtraction method or casting/molding processes. Day by
scanned using the 3D scanner. day applications of the 3D printing is increasing penetrating
deeper into the marketing, industrial, maker and customer
sector. [1]
1.1 Statement of the Problem
The increasing demand in the area of developing a model at The paper presents the detailed information about the
a faster rate, the industries requires increasing the advanced and common material used to build the products
production rate towards the huge demand by consumers for using fused deposition modelling techniques for rapid
end product. The technology must be cost effective and easy prototyping. In rapid prototyping techniques, the state of
accessible by the consumers. Prototyping is time consuming materials initially can be solid, liquid or even powder state.
from product cycle up to development life cycle and also Considering the solid forms, it can be wires, pellets or
very expensive.so the main concern is towards the laminates. Metal, resins, ceramics, wax, nylon, paper are the
maintenance of time where each end user or the organization current materials of Fused deposition modelling techniques
requires to reduce the time it takes to build the product. are ABS, PLA, polycarbonate, polyamide, polyethylene and

_______________________________________________________________________________________
Volume: 05 Special Issue: 04 | ICESMART-2016 | May-2016, Available @ http://www.esatjournals.org 182
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308

polypropylene. Some advanced materials for the special

purpose application in FDM are PZT, aluminum oxide,
stainless steel, silicon nitrate and hydro ox apatite. [2]

3. FDM PRINTING METHODOLOGY

Software Requirement Specification:
 Computer Aided Design -Unigraphics, Pro-E
 Slic-3r
 Repetier Host

Firmware Requirement Specification:

Fig 1: Flow Chart for software process
 Arduino IDE
 Marlin Firmware

Hardware Requirement Specification (Electronics):

 Arduino Mega 2560
 Ramps 1.4
 Nema 17 Stepper Motor
 A4988 Stepper Motor Driver
 MK-2B Heat Bed
 Hot End Extruder
 Printing material

The initial step is creating a model in the computer which

serves as a blueprint for 3D model. The CAD software for Fig 2: Flow chart for firmware process
creating and designing the object can be like AutoCAD,
CAM, CAE, 3DS Max etc. After designing the object, the Thus STL file is then sliced layer by layer. the thickness of
object file is required to be modified. if the object file printing object depends on the resolution of the 3D printer.
contains the curve parts then those curved parts cannot be The sliced file is then processed and it generates the control
directly given to print by the printer. Such curve parts of the signals accordingly along x, y, z axis which is processed by
object file can be converted to the STL file format. The the controller that drives the extruder motor feeding the
conversion to STL file format removes the entire curve by material layer by layer thus completing the designed object.
linear shapes.

Fig 3: Block diagram of 3D printer

_______________________________________________________________________________________
Volume: 05 Special Issue: 04 | ICESMART-2016 | May-2016, Available @ http://www.esatjournals.org 183
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308

3.1 Auto Bed Levelling

Fig 4: Auto Bed Levelling using inductive sensor

Sometimes levelling the bed manually requires constant

concentration and good vision which is tedious and time
consuming. Thus implementing the automated bed levelling
enhances the print. Running the auto bed levelling method
before printing gives less related issues on unevenness of
print bed. Issues like nozzle jamming and wrapping Fig 6- 3D Printed Mechanical Gear
problem.The entire configuration involves placing an
inductive proximity sensor instead of mechanical switches 4. CONCLUSIONS
in the z-axis. Before the actual printing the software
instructs to measure 3 points on the bed and after 3D Printing technology could revolutionize and re-shape the
completing it turns on the auto bed levelling in order to world. It will provide companies and individuals fast and
calculate the evenness of the bed. This feature traces out the easy manufacturing in any size or scale limited only by their
unevenness of the bed. It might be tilted at one end of the imagination. 3D printing, on the other hand, can enable fast,
bed thus while printing it lowers the axis to make the reliable, and repeatable means of producing tailor-made
printing parts constant with the tilt bed and always corrects products which can still be made inexpensively due to
the unevenness of the bed. It does not alter anything in the automation of processes and distribution of manufacturing
print file it just does the correction in z axis for uneven bed
needs.Auto bed levelling enhances the quality of the print
surface during printing. G1 Z1is the code that raises the
extruder to be 1mm above. The marlin firmware needs to be with less human interruption.
updated by configuring some start codes.
G29; it enables auto bed levelling ACKNOWLEDGEMENT
G92 E0; Zero the extruder length I would like to take this opportunity to express our deepest
gratitudeand appreciation to all those who have helped me
G28 X0 Y0; move X/Y to the end stop minimum
directly or indirectly towards the successful completion of
G28 Z0; move z to end stop minimum. this paper.
M107; start with fan off.
REFERENCES
4. RESULTS [1]. Ujwal Bhatia „3D Printing Technology‟ISSN: 2321-
0869, Volume-3, Issue-2, February 2015
[2]. L. Novakova-Marcincinova, J. Novak-Marcincin, J.
Barna and J. Torok„Special Materials Used in FDM
RapidPrototyping Technology Application ‘June 13–15,
2012, Lisbon
[3]. Marshall peck „Enable Auto Bed Levelling for 3D
Printer with an inductive sensor‟
[4]. F. Roger, P. Krawczak„3D-printing of thermoplastic
structures by FDM using heterogeneous infill and multi-
materials’Lyon, 24 au 28 Août 2015

Fig 5: 3D Printed Owl Model

_______________________________________________________________________________________
Volume: 05 Special Issue: 04 | ICESMART-2016 | May-2016, Available @ http://www.esatjournals.org 184
IJRET: International Journal of Research in Engineering and Technology eISSN: 2319-1163 | pISSN: 2321-7308

BIOGRAPHIES
Ms. Mary.B. Halli completed her B.E. in
ECE in the year 2014 and presently
pursuing M.Tech in VLSI design and
embedded systems.

Prof. Narayana Swamy.R is currently

working as Assoc Professor in the
department of ECE at T.John Institute of
Technology Bangalore. He has 12 years of
teaching and industrial experience. He has
obtained his M.Tech Degree VTU
Belgaum, his area of interest are in VLSI
Design circuits, Embedded systems, Computer Networking.

_______________________________________________________________________________________
Volume: 05 Special Issue: 04 | ICESMART-2016 | May-2016, Available @ http://www.esatjournals.org 185