See discussions, stats, and author profiles for this publication at: https://www.researchgate.

net/publication/282271883

GPS based portable dual-axis solar tracking system using astronomical

equation

Article · March 2015

DOI: 10.1109/PECON.2014.7062450

CITATIONS READS

7 6,482

7 authors, including:

W. Z. Wan Hasan Zainal Kadir

Universiti Putra Malaysia Universiti Putra Malaysia
146 PUBLICATIONS   388 CITATIONS    380 PUBLICATIONS   2,418 CITATIONS   

SEE PROFILE SEE PROFILE

Suhaidi Shafie Mohd Amran Mohd Radzi

Universiti Putra Malaysia Universiti Putra Malaysia
133 PUBLICATIONS   681 CITATIONS    196 PUBLICATIONS   1,692 CITATIONS   

SEE PROFILE SEE PROFILE

Some of the authors of this publication are also working on these related projects:

Memory Testing View project

It is a separate project View project

All content following this page was uploaded by W. Z. Wan Hasan on 24 February 2016.

The user has requested enhancement of the downloaded file.

 2014 IEEE International Conference Power & Energy (PECON)

GPS Based Portable Dual-Axis Solar Tracking

System Using Astronomical Equation
M.H.M Sidek, W.Z.W Hasan, M.Z.A.Ab. Kadir, S.Shafie, M.A.M.Radzi, S.A.Ahmad, M.H.Marhaban
Department of Electric and Electronic Engineering
Universiti Putra Malaysia
Serdang, Malaysia
*[email protected]

Abstract— The overall objective of this study is to design and Generally, solar tracker is device used for aligning a PV
develop a portable dual-axis solar tracking system that focuses on panel towards the sun. In this context, there are three types of
portable and mobility purpose. This paper discusses the design, solar tracking system, namely passive tracker, active tracker
electronic control system and the algorithm based on the and open-loop tracker. Passive tracker uses two canisters filled
astronomical equation. The tracking system utilizes the GPS with compressed gas fluid that placed each in the east and
module and a digital compass sensor for determining the location west of the tracking. However, this gas tracker rarely point the
and the heading feedback of the system respectively. Moreover, PV panel direct to the sun due to the unpredictable ambient
the microcontroller based tracking system is embedded with a temperature. Yet, as the advancement of sensor technology,
PID controller for which will increase the PV positioning
light sensor is used in the active sun tracker system and it is
accuracy based from the feedback signal of the absolute encoder.
placed at various locations at the tracker to determine the best
Furthermore, this paper also analyses and compares the
performance between the fixed-tilted PV panel and the developed sun position, which is done by tilting the PV panel using
portable solar tracking system. actuators. Nevertheless, cloud and shadow effect are the major
drawback of the system. This consequence bring
Keywords— portable solar tracker; dual-axis; GPS system; PID disadvantages because power is wasted to drive the tilting
controller. actuator back and forth for during its searching mode. Other
than that, open-loop tracker is also commonly used for
I. INTRODUCTION tracking the sun path as in Fig. 1. The tracker uses pre-
determined astronomical database to determine the sun
In the years ahead the demand for energy will escalate, position for any given time and location’s coordinate by using
whereas the conventional fossil fuel energy will deplete in a micro-controller or PLC. In addition, the open-loop tracker is
rapid pace. Henceforth, harvesting the power from a based on the altitude and the azimuth position of the sun,
renewable energy source is vital in order to fulfil the growing therefore, this system is not dependant to the ambient
energy needs. Among all the available renewable energy temperature and weather. This circumstances gives great
sources, solar energy is the most abundant and available all advantages, such that it will not eliminates unwanted power
year-round. In solar technology, the sun’s energy is captured dissipation and complexity. Conversely, the open-loop tracker
by using photovoltaic (PV) panel and converts the solar also has demerits that could reduce the efficiency output, as an
radiation into electricity. Additionally, PV technology is a fast instance, tracker’s misalignment during setup due to human
growing technological progress that requiring very little error. Besides, before the deployment of the solar tracker,
maintenance with zero carbon foot-print. The performance of solar path database is set manually by the supplier or
a PV panel is not only dependent upon the solar irradiance contractor. As we all know, every location has its unique solar
power, whether condition and the ambient temperature, but it path, thereupon, it will involve extra man power that will
also depends on the solar radiation’s incidence angle to the PV increase the installation or setup cost.
panel [1].
During the day, the sun appears to move through the sky
from east to west, therefore the angle between sun and a fixed
PV surface is continually changing. Thus, the power density
on a fixed PV module is less than that of the incident sunlight.
Lately, there are many works have been taken in order to
maximize the power extraction from the PV panel. Solar
tracking system offers a practical technology solution to
improve the power efficiency generated by the PV panel.
Extensive research and experiment have shown that by
maintaining consistent direct exposure from the sun to the PV Fig. 1. Sun path trajectory.
module, the tracking system able to produce up to 40 percent
Also, the mechanical system design will varies. Typically,
more power over a fixed-tilted (non-tracking) PV panel [2].
some may use a simple single-axis tracker 20 percent that has
better energy gain than the non-tracking PV panel [3].

978-1-4799-7297-5/14/$31.00 ©2014 IEEE 245

 2014 IEEE International Conference Power & Energy (PECON)

Likewise, some may even use the dual-axes tracker system Azimuth = cos-1((sinδ.cos∅ - cosδ.sin∅.cos∂)/cosα) (1)
that gives clearly 70 percent better energy gain compared to -1
the non-tracking PV panel [4]. Altitude = sin (sinδ.sinφ+cosδ.cosφ.cos∂) (2)

This research aims to design and develop a global dual- B = 360/365 . (d - 81) (3)
axes solar tracking system based on open-loop astronomical δ = 23.45°. sinB (4)
equations. The research will emphasize on the algorithm to
generate a solar path trajectory database by utilizing the ∂ = 15°. (LST - 12) (5)
information acknowledge from the Global Positioning System LST = LT + TC/60 (6)
(GPS) sensor module. Moreover, the algorithm will also cater
all location, season and environment globally. PID control TC = 4(Longitude - LSTM) + EoT (7)
algorithm for positioning the PV panel is also intensively Eot = 9.87sin(2B) - 7.53cos(B)- 1.5sin(B) (8)
highlighted. On top of that, the research will fuse and combine
all the developed sub-system into a single free-interface and LSTM = 15°. ∆TGMT (9)
easy to set-up solar tracking system controller board. This
research also compares the power efficiency of the developed
The azimuth angle of the system is based on the true north
solar tracking system controller board and a non-tracking
bearing system for its heading reference. Nonetheless, the
system under the same location and environment.
tracking system utilize digital compass sensor which is using
magnetic north bearing system. The difference angle between
II. SOLAR TRACKING ANGLES the true north and the magnetic north is called the magnetic
declination angle that varies from place to place. In order to
The main objective of the research is to maximize the PV get the true north direction for the system’s heading reference;
power generation; this can be archived by minimizing the solar the raw data must be added with the location’s declination
radiation’s incidence angle to the PV panel. Due to this factor, angle as in (10). The global declination angle information is
the solar tracker needs to follow the sun accordingly to provided from a database generated from the National
maintain the incidence angle to ideally zero degree. It is a Geographical Data Centre that has been embedded in the solar
common knowledge that the sun position in the sky changes tracking system.
from day to day and from hour to hour. For that reason, the TrueNorth = MagneticNorth + DeclinationAngle (10)
exact location of the sun in the sky is specified by two angles;
the altitude angle and azimuth angle as in Fig. 2.
IV. SOLAR TRACKER DESIGN
The position of the PV panel is controlled using the solar
tracking system for maximizing the energy harvested from the
sun anywhere. The solar tracker is the integration between
mechanical, electronic control system and its algorithm.

A. Mechanical Structure
In order to test and evaluate the algorithm and controller
performance, a tracking mechanism design has been modelled
first using mechanical design software, SolidWorks. The
overall structural design of the biaxial solar tracking system is
Fig. 2. Azimuth and altitude angle. shown in Fig. 3. The design of the solar tracker incorporated
The altitude angle is defined as the angle from the horizon several distinctive features: easy to assemble and dismantle,
of the observer to the sun, perpendicular to the horizontal lightweight and manually portable. The overall weight of the
plane. The value is 0 degree and 180 degree at sunrise and tracking part excluding the solar panel is only 5.83 kg.
sunset respectively. Whereas, the Azimuth angle is measured
clockwise from true north to the point on the horizon directly
below the sun.

III. SOLAR POSITION GEOMETRY

In this work, the solar tracking system tracks the sun based
on astronomical equations, or in other word, the tracker does
not actively find the sun's position but instead determines the
position of the sun as in (1) and (2). The sun position which is
described in terms of its altitude and azimuth angle that is
Fig. 3. Structure of the solar tracker
depends on the day number, d (from 1st January) in (3) and
the time of day, T in (9) that is derived from the following Two actuators are placed at the edge of circumference for
equation. azimuth and altitude tracking that can rotate 360 degree and
tilting 90 degree respectively. For azimuth and altitude angular

246
 2014 IEEE International Conference Power & Energy (PECON)

feedback, two 10-bit absolute encoders are mounted at the microcontrollers are also embedded with a PID controller,
azimuth and altitude’s rotation centre. Unlike other position which will increase the PV positioning accuracy based from
sensor such as linear encoder and potentiometer, the absolute the feedback signal of the absolute encoder. The absolute
encoder gives advantage because it requires no previous encoder is interfaced to both slave microcontrollers via 10-bit
traverse to provide the current position value and rotate freely grey-code digital parallel port.
in 360 degree range. Single turn encoders provide the current
angular position value within one revolution. C. Tracking System Algorithm
In this context, the developed sun tracking algorithm
B. Control System Design allows determination of sun angles and times for solar noon,
Electronic control system is design to give an accurate sunrise, and sunset with high-precision year-round. The
control signal to the mechanical system in order to get calculation of the sun angles with the sun tracking algorithm
maximum power generation from the solar PV, and it is software requires the specification of the date, time and
reliable with low power consumption. The electronic control precise longitude and latitude of the location by using the GPS
system is shown in Fig. 4. module. During the deployment of the solar tracker, the
tracking system will initialized its heading with respect to the
true north using the compass sensor. Then, the system will
take the GPS information to calculate and tabulate the
database for the sun position coordinate on the sky for the
whole year. Next, the tracking system will control the PV
position based on the tabulated database of the sun angular
movement. This algorithm allows the tracker to follow the sun
movement closely in one degree of difference for both altitude
and azimuth angle during the day. For the altitude motion
control, the motor will actuate the panel up from sunrise until
noon, and bring the panel down to the original position in the
sunset. At the same time, the azimuth motion control will
rotate the panel either in clockwise or counter-clockwise.
Contrary to this, at night, the electronic system will be in a
sleep mode that allows the reduction of the power
consumption. Fig. 5 shows the tracking system’s algorithm
summary.
PID controller is also implemented into the system
Fig. 4. Electronic control system block diagram of the solar tracking system. algorithm that is embedded in both slave microcontrollers. The
The solar PV movement is control by using a PIC18f4680 PID controller makes the PV panel rotates to its desired set
microcontroller that act as the system’s main brain. The main point with fast response and high accuracy. The value of kp, ki
system is designed to complete the calculation and generate and kd is ascertain by using trial and error method.
the database of the sun’s path trajectory throughout the year
for a particular site. Here, the generated sun position database
is stored in a non-volatile 2GB memory card. The location of
the solar tracker is determined by using a global positioning
system receiver module (GPS), which uses multiple orbiting
satellites to calculate its position. The GPS module is
connected to the microcontroller via a standard serial RS-232
port, that continuously sends to the microcontroller sentences
which contain a string of characters. These sentences mainly
include longitude, latitude, altitude, date and time for current
location to be used for the database generation. Moreover, a
digital compass sensor module also interfaced to the main
microcontroller via the two wired I2C communication
protocol. The compass sensor measures the earth's magnetic
field and outputs a value that provides a feedback on the
heading of the solar tracker with respect to the magnetic north.
Additionally, two more PIC18f4431 microcontrollers are
also implanted in the solar tracker electronic circuit. These
two slave microcontroller is used to control the PV’s azimuth
and altitude angular movement independently. The position of
the PV is control based from the information or the set point
which is sent from the main microcontroller by utilizing the
I2C communication protocol. In addition, these slave

247
 2014 IEEE International Conference Power & Energy (PECON)

Fig. 7 and Fig. 8 shows the daily variation of the PV panel

output power generated for the fixed-tilted and the tracking
system. The data recorded on the Fig. 7 proved that the solar
tracking system produced 27% more energy than the fixed-
tilted PV panel during a mostly clear day. During a cloudy
day, the tracking system also produced more energy than the
fixed-tilted PV about 19% as in Fig. 8. Henceforward, the
tracking system gives very significant difference in power
generation during morning and evening if compared to the
fixed-tilted system.
Obviously, the power generated from both tracking and
non-tracking is reduce during the cloudy condition that block
the sun irradiation. This is because the amount of power
produces is directly dependent on the received level of light.

Fig. 7. Power generation on mostly clear day.

Fig. 5. Flow chart of the solar tracking system algorithm.

V. EXPERIMENTAL SETUP
The performance of the solar tracker is assessed by
comparing the power generated between the fixed-tilted PV
panel and the developed solar tracking system as in Fig. 6. The
fixed-tilted PV panel is set to the position that will generate
the maximum power of the specific day. The maximum power
is generated during the solar noon whereas the sun is located
at the highest positions above the horizon on the day. Both
systems are deployed at an open area in Serdang with the
coordinate of 3.00 North and 101.72 East. The power
generated from both systems is recorded using a data logger
simultaneously for every minute from 7am to 8pm.
Fig. 8. Power generation on a cloudy day.

VI. CONCLUSION
In conclusion, it is clear that the solar tracking system
plays an important role to guarantee the maximum solar
energy generation from dawn until dusk. The solar tracker’s
control system successfully calculates and generates the sun’s
trajectory path through the year. Moreover, the tracker also
capable to position the PV panel towards the sun automatically
during deployment or initial set up. In addition, the embedded
PID positioning system will improve the tracking angle
accuracy in locating the elevation and azimuth angle up to ±
Fig. 6. Data collection setup of two systems.
0.2 degrees.

248
 2014 IEEE International Conference Power & Energy (PECON)

The simplicity, practical, and the effectiveness of the solar Vector Machines,” in IEEE Transactions on Industry Applications, Jun.
tracking system provides a lucrative solution mobile solar 2012, Volume: 48, Issue: 3, pp. 1064–1069.
power generation purpose that can be deployed anywhere on [2] C. Sungur, “Multi-axes sun-tracking system with PLC control for
photovoltaic panels in Turkey,” Renewable Energy, vol. 34, pp. 1119-
the surface of the earth. 1125, 2009.
[3] A. Al-Mohamad, “Efficiency improvements of photo-voltaic panels
References using a Sun-tracking system,” Applied Energy, vol. 79, pp. 345-354,
2004
[4] A.N. Khalifa, S.S. Al-Mutawalli. Effect of two-axis sun tracking on the
[1] J. Shi, W.J. Lee, Y. Liu, Y. Yang, W. Peng, “Forecasting Power Output performance of compound parabolic concentrators. Energy Conversion
of Photovoltaic Systems Based on Weather Classification and Support and Management, vol. 39, pp. 1073- 1079, 1998

View publication stats

249