Thank you for buying the RadioShack Audio/

Video Selector Switch. It allows you connect up

15-1985 to five audio/video devices to your TV or VCR,
5-In/2-Out • Tilting • Auto-Sensing and switch between them without having to
Audio / Video Selector Switch swap cables. Please read this user’s guide before
installing, setting up and using your new selector.
vcr
(INPUT 4) cbl/sat
(INPUT 3) dvd What’s Included
(INPUT 2) game INPUT (1-3) INPUT 4/RECORD/OUTPUT 2 OUTPUT 1
(INPUT 1) aux Audio/Video Selector Switch
(Front panel) Stickers
AC Power Adapter User’s Guide
Using the Stickers
Your selector comes with two sheets of cable stickers
and one sheet of device stickers to give your hookups
identities. You can use the printed stickers or write
down the connected device name on the blank sticker.
To use the cable sticker, peel off the desired sticker,
and attach to the corresponding cable. To note which
devices are connected to which set of jacks, peel
off the desired device sticker and place it below the
corresponding button.
POWER—Plug the supplied AC adapter in here.
Caution: You must use a Class 2 power source that supplies 12V DC and delivers 300mA. Specifications
Its center tip must be set to positive and its plug must fit the selector’s POWER jack. The
Power Source ................................................... DC 12V, 300mA
Use a flat-head screwdriver to supplied adapter meets these specifications. Using an adapter that does not meet these
specifications could damage the selector or the adapter. Power Consumption............................................................. 3W
open the front panel.
Dimension (H × W × D)......................... 3 1/32 × 9 1/2 × 3 3/8 in.
To avoid injury, do not connect the adapter to a ceiling outlet. ....................................................................... (77 x 241 x 86 mm)
Weight ............................................................. 18.27 oz (518 g)
Specifications are subject to change and improvement
Operation without notice. Actual product may vary from the images
found in this document.
Choosing a Location Note: Do not connect the TV or monitor’s video input to both OUTPUT VIDEO
and OUTPUT S-VIDEO on the selector.
You can place the selector on almost any flat surface. For the best results, do not place it Care
on top of a TV or other electrical appliance. 4. Connect the TV or monitor’s audio inputs to the OUTPUT 1 R/L or OUTPUT 2 R/L/
RECORD. Keep the selector dry; if it gets wet, wipe it dry
IMPORTANT: If you place the selector on the top of your TV, electromagnetic interference immediately. Use and store the selector only in normal
from the TV might distort the sound from any devices connected to the selector. If this 5. Connect the supplied AC adapter’s barrel plug to POWER jack, and then connect the temperature environments. Handle the selector
happens, move the selector away from the TV. adapter’s AC plug to a standard AC outlet. carefully; do not drop it. Keep the selector away
Note: To use the VCR, DVD-R or PVR, be sure to connect the VCR, DVD-R or PVR’s output/ from dust and dirt, and wipe it with a damp cloth
Connecting Your Selector input to the selector’s INPUT 4 RECORD/OUTPUT 2 RECORD. When you turn on the occasionally to keep it looking new.
VCR, DVD-R or PVR, the selector switches to that input so you can view the program from a
Use stereo audio/video cables with phono plugs (not included) to make all connections. Limited Warranty
connected TV.
For the best performance, use high-quality audio/video cables. The selector’s color-coded
jacks make it easy to connect devices. Yellow jacks are for video, red jacks are for right This product is warranted by RadioShack against
audio, and white jacks are for left audio. Using Your Selector manufacturing defects in material and workmanship under
normal use for ninety (90) days from the date of purchase
For convenience, you can tilt the selector forward to access the jacks on the back. The selector is pre-set to auto sensing mode. Turn on the TV and the device you want to
from RadioShack company-owned stores and authorized
view. The selector cycles through all inputs and recognizes the connected device based on
1. Connect each device’s audio outputs to a set of INPUT (1-3) R/L and INPUT 4 (R/L/ RadioShack franchisees and dealers. For complete warranty
the priority of the front panel input, and then INPUT 1, INPUT 2, INPUT 3, INPUT 4. The
RECORD) jacks on the back of the selector, or the R/L jacks on the front of the selector. details and exclusions, check with your local RadioShack
indicator on the front of the selector lights for that device.
store.
2. If a device does not have an S-Video cable, connect its video output to the selector’s If you turn on two devices at the same time, the selector selects the device with top priority
INPUT (1-3) VIDEO and INPUT 4 (VIDEO/RECORD) jacks on the back of the selector based on the priority of the front panel input, INPUT 1, INPUT 2, INPUT 3, and then RadioShack Customer Relations
or the VIDEO jack on the front of the selector. If the device does have an S-Video INPUT 4. 300 RadioShack Circle
cable, connect it to the INPUT (1-3) S-VIDEO and INPUT 4 (S-VIDEO/RECORD) jacks Fort Worth, TX 76102 04/04
or the S-VIDEO jack on the front of the selector. You can also manually select the desired device by pressing the button on the front of the
Note: Do not connect a device’s video output to both INPUT VIDEO and INPUT S-VIDEO. selector. The selector automatically switches to that input, and its indicator lights. www.radioshack.com

3. If your TV or monitor does not accept an S-Video cable, connect its video input to the Note: If you see a blue screen on your TV, or the selector does not switch back to the
selector’s OUTPUT 1 VIDEO or OUTPUT 2 VIDEO/RECORD. If the TV or monitor has previous device when you turn off your VCR, this is normal. To switch back to the previous Protect the environment by recycling used
an S-Video cable, connect it to OUTPUT 1 S-VIDEO or OUTPUT 2 S-VIDEO/RECORD. device, press the corresponding button for that device. electronics. Go to www.ecyclingcentral.com to
find a recycling location near you.

©2007. RadioShack Corporation. 12A07

All rights reserved. RadioShack and RadioShack.com are trademarks used by RadioShack Corporation. 15-1985
Printed in China

Downloaded from www.Manualslib.com manuals search engine