Scribd
Upload
71 views2 pages

DCS600

Uploaded by

Tom Varker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views2 pages

DCS600

Uploaded by

Tom Varker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PR OD UCT LI FE CY CLE STATEME NT

DCS600

The ABB life cycle management model is designed to manage an orderly transition to new
replacement products or to choose from various lifetime extending services. At the same time the
model ensures access to continuing support for our customers.

Active Classic Limited Obsolete

Limited range of life cycle Replacement and


Full range of life cycle services and support
services and support end-of-life services

Current life cycle status


The DCS600 is in the Limited phase since 01.01.2016
according to the ABB life cycle model outlined above.

Life cycle plan


It is planned to keep DCS600 in the Limited phase until
the end of 2025, after which they will be transferred to
the Obsolete phase.

Recommended actions
It is recommended to use DCS800 for extensions and
to upgrade the DCS600 drives to DCS800. Upgrade
Kits DCS800-R00 are available for the frame sizes C3,
C4, A5, A6 and A7. Moreover, it is strongly
recommended to replace DCS600 by DCS800 in case
repairs are not cost efficient.

Support for the commissioning and diagnostic


software DDC-Tool and GAD-Tool as well as of the
hardware adapter SNAT624 is limited. The product
responsible unit will neither redesign the hardware
adapter SNAT624 nor start any software updates which
would be needed to fulfil the hardware requirements of
the current generation of notebooks. To run software
tools like DDC-Tool, CMTDDC500 or GAD tool it is
mandatory to use an old notebook with interfaces like
PCIMCA (PC Card Socket for SNAT624) and LPT1
(parallel port for security device of GAD). The
recommended operating system for this notebook is
Windows 2000 or Windows XP.
Service availability in Limited phase
See details at new.abb.com/drives/Services and contact your local ABB representative for availability.

Further information
For more information on drives life cycle management
and available services, contact your local ABB
representative or at new.abb.com/drives/Services

DOCLCMDCS6001 Rev C, 1.7.2021

__ __ __
Specifications subject to change without For more information please contact your
notice. © Copyright 2021 ABB Oy. All rights local ABB representative or visit myABB – the
reserved. external business portal for quick and easy
self-service:
www.abb.com/myabb
www.abb.com/drives

You might also like