Scribd
Upload
49 views

Calc Report EMERSON

The document provides calculation data for a primary element (annubar) and conditioning orifice plate used on a 16-inch steam line. Key details include: - The annubar has a spool length of 15 inches and is rated for a flow range of 25,000 to 162,500 kg/hr. - At normal flow of 50,000 kg/hr, the predicted pressure drop across the annubar is 5.56 inches of water. - The orifice plate has a bore size of 4.5 inches and is rated for a flow range of 3,000 to 18,000 kg/hr. - At normal flow of 6,000 kg/hr, the

Uploaded by

Muhammad Salman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
49 views

Calc Report EMERSON

The document provides calculation data for a primary element (annubar) and conditioning orifice plate used on a 16-inch steam line. Key details include: - The annubar has a spool length of 15 inches and is rated for a flow range of 25,000 to 162,500 kg/hr. - At normal flow of 50,000 kg/hr, the predicted pressure drop across the annubar is 5.56 inches of water. - The orifice plate has a bore size of 4.5 inches and is rated for a flow range of 3,000 to 18,000 kg/hr. - At normal flow of 6,000 kg/hr, the

Uploaded by

Muhammad Salman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ROSEMOUNT INC.

585 - Special Applications Annubar Primary Element


CALCULATION DATA SHEET
GENERAL DATA
Customer: Jizan Refinary
Project: 19012023 1747
S. O. No:
P. O. No:
Calc. Date:
Model No: 585SSF160CHS44A6D0000800P1QC1Q8G2
Tag No: 16 inch line
PRODUCT DESCRIPTION
Product Type: Flanged with Opposite Side Support Instrument Valve:
Sensor Size: Sensor Size 44 Valve Material:
Wetted Material: 316/316L Stainless Steel Line Size: 16-in. (400 mm)
Transmitter Conn.: Remote-mount 1/2" Welded Connections Pipe Sch.: 40
Mounting Conn. Material: Carbon Steel (A105) Pipe Orientation: Horizontal
Mounting Type: ANSI B16.5 Raised Face Flanges
INPUT DATA
Fluid Type: Steam Wall: 0.500 inch
Fluid Name: Superheated
Pipe I.D. (Span): 15.000 inch
Body I.D.: 15.000 inch Base Pressure:
Duct Width: inch Base Temperature:
Pressure at Flow: 4300.000 kPa-g
Temperature at Flow: 385.00 C
Absolute Viscosity: 0.02371 cP Base Density:
Isentropic Exponent: 1.290 Atmospheric Pressure: 14.696 psia
Compressibility at Flow: 0.9322
Density at Flow: 0.9696 lb/ft3 [Primary Dimension]:
Spool Length:
Flow Rates
Minimum: 25000.00 kg/hr ←*See Warnings
Normal: 50000.00 kg/hr
Maximum: 162500.00 kg/hr
Full Scale: 162500.00 kg/hr
CALCULATED DATA (Calculation Performed at Normal Conditions. )
DP at Min Flow: 1.390 inH2O@68F Flow Coefficient: 0.5821
DP at Normal Flow: 5.560 inH2O@68F
DP at Max Flow: 58.731 inH2O@68F Rod Reynolds Number (Minimum): 147327
DP at Full Scale Flow: 58.731 inH2O@68F Rod Reynolds Number (Normal): 294654
Resonant Frequency: 456 Hz Gas Expansion Factor: 1.0000
Wake Frequency: 27 Hz Permanent Pressure Loss:
Blockage: 0.19 at Normal Flow: 1.08 inH2O@68F
at Maximum Flow: 11.39 inH2O@68F
Velocity at Max Flow: 25.49 m/sec
GUIDELINES
Primary Element Min Limit: 29979.55 kg/hr Recommended Min Rod Reynolds Number: 25000
Structural Limit (Flow): 821233.20 kg/hr Recommended Min DP: 2.000 inH2O@68F
Structural Limit (DP): 1500.0 inH2O@68F
Max. Allow. Pressure@Temp.: 5946.7 kPa-g 385 C Max. Allow. Temp.: 454 C
Design Pressure/Temperature: 4300.00 kPa-g 385.00 C
WARNINGS
Warning: the DP produced at minimum flowrate is less than 2.000000 inH2O@68F, the minimum recommended DP for best
measurement accuracy.

* Flowrate is below recommended minimum value of 29979.552012 kg/hr.

NOTES

This report is provided according to the terms and conditions of the Instrument Toolkit(TM) End-Use Customer License Agreement.
Version: 3.0 (Build215D) Printed On: 19-Jan-2023
ROSEMOUNT INC.
1595 CONDITIONING ORIFICE PLATE
CALCULATION DATA SHEET
GENERAL DATA
Customer: Jizan Refinary
Project: 19012023 1747
S. O. No:
P. O. No:
Calc. Date:
Model No: 1595P160A6SC999QC1Q8C0018
Flange Model No: 1496WN160A6CFHG1STQC1Q8
Tag No: 16 inch line COP Reverse
PRODUCT DESCRIPTION
Bore Type: Tap Type: Flange tapping
Nominal Beta: 0.30 Tap Location: Upstream
Plate Type: Paddle, Square Edged Line Size: 16-in. (400 mm)
Plate Material: 316/L Stainless Steel Pipe Schedule: STD
Meter Schedule: Pipe Material: Carbon Steel
Process Connection:
INPUT DATA
Fluid Type: Steam Calibration Factor (Fc): 1.0000
Fluid Name: Superheated
Pipe I.D.: 15.250 inch Base Pressure:
Pressure at Flow: 41.000 bar-g Base Temperature:
Temperature at Flow: 385.00 C
Absolute Viscosity: 0.02371 cP
Isentropic Exponent: 1.290 Base Density:
Compressibility at Flow: 0.9354 Atmospheric Pressure: 14.696 psia
Density at Flow: 0.9224 lb/ft3

Flow Rates:
Minimum: 3000.00 kg/hr
Normal: 6000.00 kg/hr
Maximum: 18000.00 kg/hr
Full Scale: 18000.00 kg/hr
CALCULATED DATA (Calculation Performed at Normal Conditions.)
Typical Orifice Hole Size: 2.250 inch
Pipe Reynolds Number (Normal): 229912
Calculated Orifice Bore Size: 4.500 inch Gas Expansion Factor: 0.9998
DP at Min Flow: 2.419 inH2O@68F Permanent Pressure Loss
DP at Normal Flow: 9.676 inH2O@68F at Normal Flow: 8.71 inH2O@68F
DP at Max Flow: 87.084 inH2O@68F at Max Flow: 78.42 inH2O@68F
URV (DP at Full Scale): 87.084 inH2O@68F Velocity at Max Flow: 2.87 m/sec
Beta: 0.2951
Discharge Coefficient: 0.5991

Plate Thickness: 0.375-in.


Pipe ID (thermally corrected) 15.325 inch Bore Size (thermally corrected) 4.530 inch
GUIDELINES
Primary Element Min Limit of Use 2730.80 kg/hr Min Recommended Pipe Reynolds: 5780.7
Max. Allow. Pressure @ Temp: 71.5 bar-g 385.00 C Recommended Min DP: 2.000 inH2O@68F
Design Pressure/Temperature: 41.000 bar-g 385.000 C Max. Allow. Temp.: 537.778 C
WARNINGS

NOTES

This report is provided according to the terms and conditions of the Instrument Toolkit(TM) End-Use Customer License Agreement.
Version: 3.0 (Build215D) Printed On: 19-Jan-23

You might also like