RHCE8 Practice Test EXPANSE

This exam covers objectives from EX294 and EX407

Use rd.break’s rhce8 test environment to complete this test. You will also need the chi-aws.py and nyc-
aws.py scripts which are included in the Appendix. Add an extra 4GB hard drive to node1. Ansible
should already be installed.

Task 1: Set up Ansible

1. Create a user named holden with a password of 'earth' on the control node. Create an ssh keypair for
this user.
2. Create a directory /home/holden/plays where all of your files for this exam will be created.
3. Create a configuration file that:
• Runs ansible commands as the user holden
• Points at the inventory directory /home/holden/plays/inventory
• Allows you to update at most 5 servers at a time
• Set the roles directory to /home/holden/plays/roles as well as any other required directories
• Runs ansible as a non-root user by default
4. Use the 2 dynamic inventory files that are included (chi_aws.py and nyc_aws.py) to create an
inventory that meets the following requirements:
• Your inventory is made up of 4 groups:
◦ dev
◦ chi_aws (member of web group)
◦ nyc_aws (member of web group)
◦ web
• node1.ansi.example.com is a member of dev
• Other nodes will be assigned to their groups via the python scripts
◦ node2.ansi.example.com is a member of the chi_aws and web groups
◦ node3.ansi.example.com is a member of the nyc_aws and web groups
◦ node4.ansi.example.com is a member of the nyc_aws and web groups

Task 2: Adhoc Commands

1. Write a script called holden.sh that:
• Creates the user holden on all hosts with a password of earth. He should have a secondary
group of wheel.
• Sets up passwordless login to each node for holden.
• Sets up the proper sudo privileges that allow holden to elevate privileges without using a
password.
• Deletes all repo files currently located in /etc/yum.repos.d/ on nodes 1-4.

Task 3: Secrets
1. Create an encrypted vault file (using thering as the password) named ~/plays/vars/secret.yml that
will set the following variables:
• crew_pass = 'roci'
• muscle_pass = 'duhhh'
2. Save the password to secret.yml file in a file named ~/plays/secret_key.
3. Make your playbooks use the secret.yml file without interaction.

Task 4: Set up Repositories

1. Create a playbook called repo.yml that will:
• Create a single repo file named exam.repo that will include the following repositories:
◦ A repository named base with a description of "Exam BaseOS Repo" that points at the
repository located at http://repo.ansi.example.com/BaseOS.
◦ A repository named apps with a description of "Exam AppStream Repo" that points at the
repository located at http://repo.ansi.example.com/AppStream.
• Both repositories should be enabled and gpg checking should be disabled

Task 5: Set timezone

1. Write a playbook named time.yml that will:
• Set the timezone on the chi_aws servers to American Central time.
• Set the timezone on the nyc_aws servers to American Eastern time.
• On the web nodes:
◦ Creates a file named /var/log/logins.log owned by root,with a group of root and
permissions of 0766. The file should contain the line:
---- User Logins for HOSTNAME ----
where HOSTNAME is replaced with the fully qualified domain name of the node.
◦ Add the following line to /etc/skel/.bashrc:
date >> /var/log/logins.log

Task 6: Packages and Services

1. Write a playbook named packages.yml that will:
• Install git, php, httpd, mod_ssl, mariadb, and mariadb-server on the dev group.
• Install php, httpd, and mod_ssl on the web group.
• Updates all packages on all nodes
• Verify that the firewall is running and start up apache for the web group and allow secure and
non-secure HTTP traffic.
• Verify the firewall is running on the dev group and start apache and mariadb-server. Allow tcp
traffic on ports 80, 443, and 3306.
• All services and firewall rules should survive a reboot.

Task 7: Set up Users

1. Create a file named ~/plays/vars/crew.yml with the following information in it:
crew
name groups shell expires
naomi wheel, brains /bin/bash Insert a value for never
amos muscle /sbin/nologin Insert value for 60 days from now
alex brains /bin/sh Insert value for 60 days from now
bobbie muscle /bin/bash Insert value for 60 days from now
2. Write a playbook called users.yml that uses the crew.yml file that you just made to create the users
for the nodes.
• Passwords will be pulled from the secret.yml file from earlier everyone except the muscle users
will be using the crew_pass variable for their passwords.
• All users should be created on the dev group.
• The muscle users should be created on the nyc_aws group.
• The brains users should be created on the web group.
Task 8: Facts
1. Create a playbook that will contains 2 plays . Thei first play will place custom facts file on the web
group. The file should:
• Be named custom.fact
• Contain a section called customer
• Nodes in the nyc_aws group should have these facts:
◦ company – Big Apple Hosting
◦ contact – [email protected]
• Nodes in the chi_aws group should have these facts:
◦ company – Windy City Hosting
◦ contact – [email protected]
2. Create a second play that will build a dynamic index.html page to be placed in
/var/www/html/index.html. The page should contain:
<H2>Welcome to HOSTNAME at Windy City Hosting!</H2>
<p>This webserver has ### MB of RAM to serve up your requests on IP ADDRESS. If you
have questions, please email [email protected]</p>
• Everything in red should be dynamically generated for each host.
• This play should run on the web group.

Task 9: Creating a Role

1. Create a directory for your roles: ~/plays/roles
2. In the roles directory, create a role named vsftpd-web. The role should do the following:
• Install vsftpd, start and enable the service, and create appropriate firewall rules.
• Creates a file /etc/vsftpd/banned_emails that includes: [email protected], [email protected], and
[email protected]
• Includes these default variables:
◦ ftp_banner – Eff Tee Pee
◦ ftp_anon_enable – YES
◦ deny_emails - YES
• Changes the following settings in /etc/vsftpd/vsftpd.conf:
◦ Changes the anonymous_enable line to include the variable ftp_anon_enable.
◦ Enables a banner and changes the banner line to use the ftp_banner variable in place of the
word "blah"
◦ Sets deny_email_enable to the value in the variable deny_emails.
• Restarts vsftpd any time a change is made to the config file.
3. Create a playbook named vsftpd.yml that installs your new role on node2.

Task 10: Using RHEL System Roles

1. Install the the timesync RHEL system role on node1.
2. Use the following ntp servers with iburst enabled:
• time-a-g.nist.gov
• time-a-wwv.nist.gov
• time-e-b.nist.gov

Task 11: Storage

1. Write a playbook that only runs on all servers called storage.yml that meets the following
requirements:
 • On nodes that do NOT have a /dev/sdc, it will mount /dev/sdb on /NODE-backup where NODE
is the hostname of the node.
• On nodes that DO have a /dev/sdc, it will mount /dev/sdc on /NODE-backup where NODE is
the hostname of the node
• On the node that has the extra hard drive, create a logical volume called tycho_station in the
volume group belters.
• The vg should reside on the 4GB storage device.
• Mount an ext3 filesystem on the new logical volume in the directory /logical.

Task 12: Blocks

1. Write a playbook named rescue.yml that will:
• Create a backup of the /etc/httpd/conf/httpd.conf file named httpd.conf.backup on the
control node.
• Copy a new config file over to the node and restart the httpd server. Simulate a bad config file
by uploading a file that contains only the line "I am a bad config file".
• If the server fails to restart (and it should), then the play should recover by re-uploading the
backup file and restarting the httpd server.
2. Run this play on the web group.

Task 13: Security

1. Create a playbook called security.yml that will:
• Apply the rhel-system-role.selinux to the web group.
• Use the hostvars to determine which security_group each node is in:
◦ web_9999 should have selinux_state set to enforcing
◦ web_9898 should have selinux_state set to permissive

Task 14: Using Variables

1. Write a playbook called maria.yml that will run on the all nodes that will:
• Check the mariadb log on node1for the last time it was restarted using this (admittedly super
ugly) bash one-liner: grep ready /var/log/mariadb/mariadb.log | tail -n1 | awk '{print
$2,"on",$1}'
• Register the output of the above command and then on the web group, add a line to the bottom
of /var/www/html/index.html that says "The database was last restarted at BLANK" (where
BLANK is the output.
• If the command from above does not return a value, then the line should read "The database is
NOT RUNNING!"

Task 15: Archiving

1. Write a playbook called configs.yml that will run on all hosts. It should:
• Create a bzip2 archive of the /etc/ directory named HOSTNAME_etc_backup.tar.bz2 where
HOSTNAME is the name of the node.
• Each backup file should be copied to the /logical/backups directory on node1

Task 16: Scheduled Tasks

1. Write a playbook named scheduled.yml that will run on all hosts. It should:
 • Create a task that will run every Friday at 5:00pm that uses the wall command to output the
message "Time to go home!" to all logged in terminals.
• It should run from the root user and have a name of "Dismiss the staff".

Task 17: Ansible Galaxy Roles

1. Install the ansible galaxy role geerlingguy.nfs in the roles directory.
2. Write a playbook called nfs.yml that will:
• Apply the geerlingguy.nfs role to node1 using this for your nfs export:
/logical/backups *(ro,sync,no_root_squash)
• Create a mount in the /configs directory on all nyc-aws hosts that points at the newly created
nfs share.
• Ensure that the nfs share in /configs is mounted at boot.
Appendix:
Source code for chi-aws.py:
#!/usr/bin/env python3
import os
import sys
import argparse

try:
import json
except ImportError:
import simplejson as json

class ExampleInventory(object):

def __init__(self):
self.inventory = {}
self.read_cli_args()

# Called with `--list`.

if self.args.list:
self.inventory = self.example_inventory()
# Called with `--host [hostname]`.
elif self.args.host:
# Not implemented, since we return _meta info `--list`.
self.inventory = self.empty_inventory()
# If no groups or vars are present, return an empty inventory.
else:
self.inventory = self.empty_inventory()

print (json.dumps(self.inventory))

# Example inventory for testing.

def example_inventory(self):
return {
'chi_aws': {
'hosts': ['node2'],
'vars': {
'ansible_ssh_private_key_file':
'~/.ssh/id_rsa',
'example_variable': 'value'
}
},
'_meta': {
'hostvars': {
'node2': {
"ansible_fqdn": "node2.ansi.example.com",
"ansible_hostname": "node2",
'security_group': 'web_9999'
}
}
}
}

# Empty inventory for testing.

def empty_inventory(self):
return {'_meta': {'hostvars': {}}}

# Read the command line args passed to the script.

def read_cli_args(self):
parser = argparse.ArgumentParser()
parser.add_argument('--list', action = 'store_true')
parser.add_argument('--host', action = 'store')
self.args = parser.parse_args()

# Get the inventory.

ExampleInventory()
Source code for nyc-aws.py:
#!/usr/bin/env python3
import os
import sys
import argparse

try:
import json
except ImportError:
import simplejson as json

class ExampleInventory(object):

def __init__(self):
self.inventory = {}
self.read_cli_args()

# Called with `--list`.

if self.args.list:
self.inventory = self.example_inventory()
# Called with `--host [hostname]`.
elif self.args.host:
# Not implemented, since we return _meta info `--list`.
self.inventory = self.empty_inventory()
# If no groups or vars are present, return an empty inventory.
else:
self.inventory = self.empty_inventory()

print (json.dumps(self.inventory))

# Example inventory for testing.

def example_inventory(self):
return {
'nyc_aws': {
'hosts': ['node3', 'node4'],
'vars': {
'ansible_ssh_private_key_file':
'~/.ssh/id_rsa',
'example_variable': 'value'
}
},
'_meta': {
'hostvars': {
'node3': {
"ansible_fqdn": "node3.ansi.example.com",
"ansible_hostname": "node3",
'security_group': 'web_9999'
},
'node4': {
"ansible_fqdn": "node4.ansi.example.com",
"ansible_hostname": "node4",
'security_group': 'web_9898'
}
}
}
}

# Empty inventory for testing.

def empty_inventory(self):
return {'_meta': {'hostvars': {}}}

# Read the command line args passed to the script.

def read_cli_args(self):
parser = argparse.ArgumentParser()
parser.add_argument('--list', action = 'store_true')
parser.add_argument('--host', action = 'store')
self.args = parser.parse_args()

# Get the inventory.

ExampleInventory()