Scribd
Upload
19 views

Computer Reviewer

Sensors are devices that detect and respond to inputs from the environment such as light, heat, motion, and pressure. They send this input data to microprocessors which can then affect the robot's movement and behavior. The document describes the input and output devices, parts, and additional devices of a land raider robot. Input devices include ultrasonic sensors, line follower sensors, and tracks. Output devices include buzzers, LED rings, and encoder motors. Key parts are the Me Auriga mainboard, tracks, plates, beams, screws, and sensors. Additional optional devices include Bluetooth modules and RGB LED rings.

Uploaded by

Hazel Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
19 views

Computer Reviewer

Sensors are devices that detect and respond to inputs from the environment such as light, heat, motion, and pressure. They send this input data to microprocessors which can then affect the robot's movement and behavior. The document describes the input and output devices, parts, and additional devices of a land raider robot. Input devices include ultrasonic sensors, line follower sensors, and tracks. Output devices include buzzers, LED rings, and encoder motors. Key parts are the Me Auriga mainboard, tracks, plates, beams, screws, and sensors. Additional optional devices include Bluetooth modules and RGB LED rings.

Uploaded by

Hazel Pacheco
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Computer

Sensor
- A device that detects and responds to some type of input from the physical
environment.
- The input can be light, heat, motion, moisture, pressure, or any number of
other environmental phenomena.
- Sensors can affect the movement and behavior of the robot by sending
input data from the environment to the microprocessors.
INPUT DEVICES -> PROCESS -> OUTPUT DEVICES
Input Devices
1. Me Auriga Mainboard
2. Ultrasonic Sensor
3. Line follower Sensor
4. Strong and lightweight tracks
5. Industrial grade aluminium alloy parts
6. Powerful motor performance
Output Devices
1. Buzzer
2. LED ring
3. Encoder Motor Port
Parts of the Land Raider:
Encoder Motor – Used to control the rotational speed of a wheel based on a
value written in a program
Plate 0324-88 – Used to support the back side of the Land Raider.
Plate 135 – Used to support the front side of the land raider tracks.
Beam 0824-112 – Used to secure back and front sides of both tracks.
Plastic Gear Wheel – used to move over the track.
Plate T-Type 1 – used to hold the battery box.
Battery Box Plate – Used to keep batteries in places safely and securely.
Batteries – Use to supply power to the robot.
Bracket 3x3 – Used to keep the ultrasonic sensor in place at the front of the
Land Raider.
Plate T-Type 2 – Used to secure the Battery box and supports the Me Auriga
board.
Beam 0824-048 – Used to keep the Line Follower Sensor in place at the
bottom front side of the robot.
Line Follower sensor – Used to detect the color of a line.
Ultrasonic Sensor – Used to measure the distance of nearby objects in front of
the robots.
Me Auriga Board – Serves as the brain of the Land Raider and Responsible for
processing input and sends output data.
Track – Used to allow Land Raider to navigate even on rough terrain and
slippery surfaces.
Nut M4 – Used to lock screws.
M4x10 Screw – used to fasten most of the Land Raider together.
M2.5 x 12 Screw – Used to attach each wheel gear to the encoder motor.
M4 x 14 – Used to secure the placement of brass studs.
Brass Stud Screw – Used as a foundation between two plates (T-Types).
Onboard Light Sensor – Measures ambient light.
Onboard Sound Sensor – Detects the intensity of sound.
Onboard Thermistor – Measures ambient temperature.
Onboard Gyroscope – Measures angular velocity.
Parts of The Me Auriga
 5V Led Indicator
 Buzzer
 Reset
 USB Connector
 Power Jack
 Power Switch
 Encoder Motor Port
 6-12v Led Indicator
 Sound Sensor
 RJ25 Ports
 Encoder Motor Port
Additional Devices
 Bluetooth Module
 Light Sensors
 Rgb led Ring
 Power Switch

You might also like