Scribd
Upload
437 views1 page

Design Mix of CTSB

The document summarizes the mix design for CTSB/CTGSB mix as per IRC SP 89 and IRC-37 standards. It provides details of the material proportions, properties tested, and test results for aggregate impact value, water absorption, compaction, Atterberg's limits, and cube strength.

Uploaded by

aashish patidar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
437 views1 page

Design Mix of CTSB

The document summarizes the mix design for CTSB/CTGSB mix as per IRC SP 89 and IRC-37 standards. It provides details of the material proportions, properties tested, and test results for aggregate impact value, water absorption, compaction, Atterberg's limits, and cube strength.

Uploaded by

aashish patidar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Four Laning of Harda to Teamagaon section (Harda - Betul Pkg-1) NH-47(Old NH-59A) from Design

Ch. 0.000 To Design Ch. 30.000 (Length - 30.00 Km) under Bharatmala Pariyojana Phase - 1
(Economic Corridor) in the state of Madhya Pradesh on HAM Mode
Client : National Highway Authority of India
Independent Engineer : Lion Engineering Consultant Private Limited
Concessionaire : Harda Pathways Private Limited
EPC : Prakash Asphaltings & Toll Highways India Limited

SUMMARY OF CTSB/CTGSB MIX DESIGN (CONFIRMATRY)


As Per IRC SP 89 PART-1(2010),IRC SP 89 PART-2(2018),IRC -37 2018,Clause 400 MoRTH
MIX Proportion
Material Lab % Plant % Qty(Kg)
40 MM 50.0% 50.0% 500
25 MM Down 22.0% 22.0% 220
6 MM Down 28.0% 25.0% 250
Cement Content (%) 3.0% 3.0% 30
Total 103% 100% 1000
Water Content (%) 5.1% 5.10% 51

Sr.No Property Test Specification Test Result

53 100 100.0
Gradation 26.5 50 - 80 73.76
1 Grading IV of Table 400-1
MoRTH 4.75 15 - 35 25.65
0.075 <5 3.15
Aggregate Impact Value
2 40%max 12.35
(IS-2386 PART-4)
53 MM To 4.75 MM 0.90%
Water Absorption
3 2.0% max
(IS-2386 PART-3) 4.75 MM Down 1.7%

5 Cement Content - 2.0% Min. 3.00%


3
M.D.D(gm/cm ) _ 2.358
6 Compaction Test
O.M.C (%) _ 6.0

Liquid Limit 25% max 16.2%

7 Atterberg's Limit Plastic Limit 20% max N.A.

Plasticity Index 6% max N.P.

3* Mpa / 1.5**
Cube Strength at 3.0 % Mpa (As Per IRC
8 7 days 8.17 Mpa
cement content SP-89) CHAPTER
4 TABLE-8
＊
Average value of a batch of 5 cubes
＊＊
Minimum strength of an individual cube within the batch.

For EPC Contractor's Rep. For,Concessionaire Rep. For Independent Engineer Rep.

You might also like