Scribd
Upload
44 views5 pages

Concrete Slab Design.

The document summarizes the design of a reinforced concrete slab that is part of a parking structure. It details the slab dimensions, material properties, required and provided tension and compression reinforcement, and checks that design requirements are met for deflection and reinforcement. Key values include a slab depth of 200mm, maximum moment of 40 kNm/m, tension reinforcement requirement of 581 mm^2/m and provision of 1005 mm^2/m, and confirmation that design checks for reinforcement and deflection were passed.

Uploaded by

Johan De Lange
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
44 views5 pages

Concrete Slab Design.

The document summarizes the design of a reinforced concrete slab that is part of a parking structure. It details the slab dimensions, material properties, required and provided tension and compression reinforcement, and checks that design requirements are met for deflection and reinforcement. Key values include a slab depth of 200mm, maximum moment of 40 kNm/m, tension reinforcement requirement of 581 mm^2/m and provision of 1005 mm^2/m, and confirmation that design checks for reinforcement and deflection were passed.

Uploaded by

Johan De Lange
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Page No.

Revision

Engineer JdL Date May 2018

Checked Date

Job No. 31033 W/S Job Title GMT Phase2 parking structure block C

Subject GMT Phase 2 parking structure Block C - 10m span - 350 slab

Reinforced Concrete Slab

Location Span reinforcement

Forces Slab Dimensions

Maximum Moment M = 40 kNm/m Slab depth 200 mm


Tension reinft cover 25 mm
Comp. reinft cover 25 mm
Material Properties Span of slab 1.5 m

Characteristic strength of tension reinforcement fy = 460 N/mm2


Concrete Strength fcu = 30 N/mm2

Compression and Tension Reinforcement

Effective depth (tension reinft) d= 167 mm


Effective depth (comp reinft) d' = 30 mm
k= 0.048 No compression reinft. required
Lever arm z= 157.6 mm
x= 20.9 mm

Tension Reinforcement

Required tension reinforcement Areq = 581 mm2/m


Provided tension reinforcement Aprov = 1005 mm2/m Provide T 16 s @ 200 cts
Tension reinforcement ok
Compression Reinforcement

Required tension reinforcement As' = 0 mm2/m


Provided tension reinforcement As'prov = 393 mm2/m Provide T 10 s @ 200 cts
Compression reinft ok
Deflection

Basic span/effective depth ratio 27


Design service stress fs = 177 N/mm2
Tension modification factor 1.62
Compression modification factor 1.07
Modified span/effective depth ratio 46.9
Actual span/effective depth ratio 9.0
Span/effective depth ratio ok
REINFORCED CONCRETE SLAB DESIGN In accordance with BS 8110 : Part 1 : 1997
Job Title:
Job Number:
Beam reference:

Forces Beam Dimensions


Maximum moment M= 40.0 kNm/m Depth

Tens. reinft cover


Material properties Comp. reinft cover
460 N/mm
2
Char. strength tension reinft fy = Span

Concrete strength fcu = 30 N/mm2

Compression and Tension Reinforcement

Effective depth to tension reinft d= 167.0 mm


Effective depth to comp.reinft d' = 30.0 mm d'/x = 1.436127
k= 0.048 No compression r
Lever arm factor 0.944
Lever arm z= 157.6 mm
x= 20.9 mm
Reduced char. strength comp reinft not reqd N/mm2

Tension reinforcement
Tension reinforcement required As = 581 mm2/m
Tension reinforcement provided As prov = 1005 mm2/m Provide

Compression reinforcement
Compression reinforcement required As' = 0 mm2/m
Compression reinforcement provided As' prov = 392.6991 mm2/m Provide T

Max shear stress 4.38178

400/d 2.39521

Shear link spacing s= mm

Deflection
Basic span/effective depth ratio 27
Design service stress fs = 177 N/mm2
Modification factor (tension reinft) 1.620279
Modification factor (compression reinft) 1.072686
Modified span/effective depth ratio 46.9
Actual span/effective depth ratio 9.0

Minimum tension reinforcement As min = 217 mm2


Minimum compression reinft. As' min = 0 mm2
200 mm
1000
25 mm
25 mm
1.5 m

No compression reinft. required

16 @ 200 CTS
Tension reinforcement ok

10 @ 200 CTS
Compression reinft ok
Span/effective depth ratio ok

Pass

You might also like