Scribd
Upload
248 views10 pages

Creating Custom Screen in XD01 BADI

This document provides instructions for creating a custom screen in transaction XD01 in SAP. It involves several steps: 1. Define a screen group and tab page for the custom fields. 2. Create an implementation to activate the custom fields. 3. Add code to display the custom screen and link it to an existing transaction. 4. Define a custom field in table KNA1 and link it to the new screen. 5. Add validation to disable the custom field in display mode.

Uploaded by

Arun Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
248 views10 pages

Creating Custom Screen in XD01 BADI

This document provides instructions for creating a custom screen in transaction XD01 in SAP. It involves several steps: 1. Define a screen group and tab page for the custom fields. 2. Create an implementation to activate the custom fields. 3. Add code to display the custom screen and link it to an existing transaction. 4. Define a custom field in table KNA1 and link it to the new screen. 5. Add validation to disable the custom field in display mode.

Uploaded by

Arun Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Creating Custom Screen in XD01

By Suresh Kumar Parvathaneni

Go to Transaction SPRO Æ Logistics – General Æ Business Partner Æ


Customers Æ Control Æ Adoption of Customer’s own Master Data fields Æ
Prepare Modification Æ Free enhancement of Customer Master Record.

Following screen appears:

Go to CHANGE mode and Click ‘New Entries’ button. Then add a Screen Group
(SK here)and meaningful description. Save the entry and then SELECT that
entry and Click on ‘Label Tab Pages’.

Add a Label Tab Page i.e. enter a Screen Number, Function Code and
Meaningful Description.

Save the entry and come back to the SPRO screen. Click Business Add-in:
Processing Master Data Enhancements
Create one Implementation by giving implementation name (must start with Z.
ZSURESHKUMAR here). Give meaningful description and press enter. The
following screen appears.
Go to Interface and Click on ‘CHECK_ADD_ON_ACTIVE’ method. Add the
following code and save.

method IF_EX_CUSTOMER_ADD_DATA~CHECK_ADD_ON_ACTIVE .

data: l_flg_active type BOOLE-BOOLE.

if i_screen_group = 'SK'.

e_add_on_active = 'X'.

endif.

endmethod.

Activate that and come back to SPRO initial screen. Click Business Add-in:
Customer Subscreens
The following screen will appear. Create one implementation
(ZSURESHKUMAR1 here).

Press enter. The following screen will come. Enter a meaningful Description and
Screen Group (which we created earlier) as shown below.
Then go to Interface
Create a Function Pool SAPLZSURESHKUMAR. (See the code of the program
for other details). Create a Screen ‘1111’ with field old Customer Number –
screen group PSK (SE51)

Click on GET_TAXI_SCREEN method and add the following code.

method IF_EX_CUSTOMER_ADD_DATA_CS~GET_TAXI_SCREEN .

case i_taxi_fcode.

when 'SK_TAB'.

e_screen = '1111'. "Eart + Objekt

e_program = 'SAPLZSURESHKUMAR'.

e_headerscreen_layout = ' '.

endcase.

endmethod.

Activate and leave the transaction.

Go to KNA1 (Customer Master) table and add a custom field as shown below. Activate the table.
Now go to XD01 transaction.
The screen we created will appear as shown in the above screen-shot. Click the button. The following
screen will appear.
Enter a customer number and save the transaction. Now go to KNA1 table and check the value of the Old
Customer Number field’s value. The value you entered in this screen will appear on there.

Until now, we have written code for creating the Custom field. Now we need to
disable that field when we are opening the transaction in DISPLAY mode.

Go to include – LZSURESHKUMARTOP and enter the following code and activate the program.
Now execute the Transaction in display mode and check the outpu

You might also like