Lecture 0 Course Introduction
Lecture 0 Course Introduction
PG 2020
Spring 2021 Semester
Fawad A. Najam
Department of Structural Engineering
NUST Institute of Civil Engineering (NICE)
National University of Sciences and Technology (NUST)
H-12 Islamabad, Pakistan
Cell: 92-334-5192533, Email: [email protected]
Why This Course?
Characterization of Seismic
Ground Motions
Future ground
shaking
Epicenter
Epicenter
Estimation of Linear/Nonlinear
Site
Site
Seismic Demands
Fault
Fault
Soil
Soil Site
SiteResponse
Response
Ground
Ground motioncan
motion can
bebe amplifiedby
amplified bysoil
soil • Global-level Responses
Attenuation • Inter-story Responses
Seismic waves lengthen and diminish in strength
as they travel away from the ruptured fault.
• Component-level Responses
Hypocenter
Hypocenter
(Focus) Seismic
SeismicWaves
Waves
(Focus)
• Pakistan is located on a highly earthquake-prone and seismically active part of the world.
• The country lies on a tectonically active Himalayan orogenic belt developed as a result of slow
collision (extended over last 30-40 million years) among the Indian, Arabian, and Eurasian
tectonic plates.
• This geological setting has resulted in a number of active seismic sources and faults in the
region which are capable of producing moderate- to large-magnitude earthquakes.
• Besides having a high level of seismic hazard, the country is also confronted over the years
with high rate of population increase and rapid growth of urbanization.
• With all these challenges and high seismic risk, there is an urgent need of equipping the civil
engineering students with state-of-the-art information about seismic hazard, risk and its
mitigation.
• This course aims to develop basic expertise and skill among the students about various
practical aspects of seismic design of buildings and structures.
• Part 6: Term Project: The Performance-based Seismic Evaluation of a Real Case Study
Building
• Textbook
• Lecture notes provided by instructor
• Reference Books
1) T. Pauley, and M. J. N. Priestley, (1992): Seismic Design of Reinforced Concrete and Masonry Buildings, John
Wiley and Sons, New York.
2) A. K. Chopra, (1995): Dynamics of Structures-Theory and Applications to Earthquake Engineering, Prentice Hall,
New Jersey.
3) R. W. Clough, and J. Penzien, (1993): Dynamics of Structures, McGraw-Hill, New York, 2nd Edition.
4) J. W. Smith, (1988): Vibration of Structures: Applications in Civil Engineering Design, Chapman and Hall, London.
5) W. F. Chen and C. Scawthorn (2003), Earthquake Engineering Handbook.
6) T. Y. Lin and S.D. Stotesbury (1988): Structural Concepts and Systems for Architects and Engineers, 2nd edition,
Van Nostrand Reinhold.
7) Graham H. Powell (2010): Modeling for Structural Analysis, Computers & Structures Inc.
8) Edward L. Wilson (2000): Three-Dimensional Static and Dynamic Analysis of Structures, Computers & Structures
Inc.
9) Tall and Super-tall Buildings: Planning and Design (2014): Editor: Akbar Tamboli, Publisher: McGraw-Hill
Professional, with CTBUH and ICC, ISBN13: 978-0071818711 ISBN: 0071818715
10) James K. Wight (2016): Reinforced concrete: Mechanics and design, 7th edition, Prentice Hall.
11) E. G. Nawy (2009): Reinforced concrete: A Fundamental Approach, 6th edition, Prentice Hall International
12) Arthur H. Nilson, David Darwin, Charles W. Dolan (2005): Design of Concrete Structures, 13th Edition.
13) Bungale S. Taranath (2010): Reinforced Concrete Design of Tall Buildings, Taylor and Francis Group, LLC.
• International Standards/Guidelines
1) TBI (2010): Guidelines for Performance-Based Seismic Design of Tall Buildings - PEER
2) FEMA 356 (2000): Pre-standard and Commentary for the Seismic Rehabilitation of Buildings
3) ATC-40 (1996) Seismic Evaluation and Retrofit of Concrete Buildings, USA
4) ASCE/SEI 41-13 (2014): Seismic Rehabilitation of Existing Buildings (ASCE/SEI 41-13)
5) Council on Tall Buildings and Urban-Habitat (2008): Recommendations for the Seismic Design of High-Rise
Buildings.
6) PEER/ATC-72-1 (2011): Modeling and Acceptance Criteria for Tall Buildings, USA
7) ASCE 7-16 (2017): Minimum Design Loads and Associated Criteria for Buildings and Other Structures (ASCE/SEI
7-16)
• Research Journals
1) Earthquake Engineering & Structural Dynamics, Wiley
2) Engineering Structures, Elsevier
3) The Structural Design of Tall and Special Buildings
4) Soil Dynamics and Earthquake Engineering, Elsevier
5) Journal of Structural Engineering, ASCE
6) ACI Structural Journal, ACI7)
7) Structural Engineering International Journal, IABSE
8) Magazine of Concrete Research, ICE
• Learning Resources
• http://peer.berkeley.edu/
• https://www.fema.gov/
• www.ctbuh.org
• www.structuralengineering.info
• https://earthquake.usgs.gov/
• http://www.iris.edu/hq/
• http://ds.iris.edu/ieb/
• Magazines/Articles
http://www.structuremag.org/
https://www.istructe.org/thestructuralengineer
http://ctbuh-korea.org/ijhrb/index.php
https://www.express.pk/story/968021/
http://www.technologyreview.pk/the-science-of-earthquakes/
http://www.technologyreview.pk/12-years-october-earthquake-pakistan-prepared-handle-another-big-
one/
• Video Playlists
• Nonlinear Modeling and PERFORM 3D Seminar by Graham H. Powell
Description: Four valuable sessions on nonlinear modeling of structural components + Hands-on training sessions
PERFORM 3D.
Link: Will be provided by instructor
• Instructor
Dr. Fawad Ahmed Najam
Assistant Professor (Structural Engineering)
NUST Institute of Civil Engineering (NICE)
School of Civil and Environmental Engineering (SCEE)
National University of Sciences and Technology (NUST)
H-12 Islamabad, Pakistan
Cell: 92-334-5192533, Email: [email protected]
Office No: 118, 1st Floor, NIT Building, SCEE, NUST