SM-112/N
LOW FREQUENCY TRANSDUCER
www.beyma.com SM Series
KEY FEATURES
● High power handling (400 WAES).
● 3” (77 mm) copper voice coil with apical former.
● Optimum winding length for increase linear excursion.
● Extended response in the medium frequency range.
● Designed for high power woofer applications.
TECHNICAL SPECIFICATIONS
Nominal diameter 300 mm 8 in
Rated impedance 8Ω
DIMENSION DRAWINGS
Minimum impedance 7,7 Ω
Power capacity* 400 WAES
Program power 800 W
Sensitivity 95,2 dB 2,83v @ 1m @ 2π
Frequency range 35 - 4.000 Hz
Recom. enclosure vol. 30 / 100 l 1,06 / 3,53 ft3
Voice coil diameter 77 mm 3 in
Magnetic assembly weight 4,9 kg 10,8 lb
Bl factor 15,1 N/A
Moving mass 0,059 kg
Voice coil length 17,5 mm
Air gap height 7 mm
Xdamage (peak to peak) 30 mm
THIELE-SMALL PARAMETERS**
MOUNTING INFORMATION
Resonant frequency, fs 43 Hz
D.C. Voice coil resistance, Re 6,2 Ω Overall diameter 312 mm 12,3 in
Mechanical Quality Factor, Qms 12,43 Bolt circle diameter 294,5 mm 11,6 in
Electrical Quality Factor, Qes 0,45 Baffle cutout diameter:
Total Quality Factor, Qts 0,44 - Front mount 277,5 mm 10,9 in
Equivalent Air Volume to Cms, Vas 94,24 l - Rear mount 280 mm 11 in
Mechanical Compliance, Cms 223 µm / N Depth 138 mm 5,43 in
Mechanical Resistance, Rms 1,32 kg / s Volume displaced by driver 4,5 l 0,16 ft3
Efficiency, η0 1,65 % Net weight 5,65 kg 12,45 lb
Effective Surface Area, Sd 0,055 m2 Shipping weight 6,01 kg 13,23 lb
Maximum Displacement, Xmax *** 7,25 mm
Displacement Volume, Vd 300 cm3 Notes:
Voice Coil Inductance, Le @ 1 kHz 1,7 mH * The power capaticty is determined according to AES2-1984 (r2003) standard. Program
power is defined as the transducer’s ability to handle normal music program material.
** T-S parameters are measured after an exercise period using a preconditioning power test.
The measurements are carried out with a velocity-current laser transducer and will reflect the
long term parameters (once the loudspeaker has been working for a short period of time).
*** The Xmax is calculated as (Lvc - Hag)/2 + (Hag/3,5), where Lvc is the voice coil length and
Hag is the air gap height.
SM-112/N
LOW FREQUENCY TRANSDUCER
www.beyma.com SM Series
LOW & MID FREQUENCY TRANSDUCER
FREE AIR IMPEDANCE CURVE
[Ω]
[Hz]
FREQUENCY RESPONSE AND DISTORTION
[dB]
[Hz]
Note: On axis frequency response measured with loudspeaker
standing on infinite baffle in anechoic chamber, 1W @ 1m
Polígono Industrial Moncada II ▪ C/. Pont Sec, 1c ▪ 46113 MONCADA - Valencia (Spain)
▪ Tel.: (34) 96 130 13 75 ▪ Fax: (34) 96 130 15 07 ▪ http://www.beyma.com ▪ E-mail: [email protected] ▪
07/11
