Scribd
Upload
186 views1 page

Shell Dimension

This inspection record documents the dimensional inspection of a strainer shell length. Measurements were taken at four orientation points (0, 90, 180, 270 degrees) and found to be within the specified tolerance of ±6 at each point, with actual measurements of 735 and drawings specifying 731. The inspection results were recorded, reviewed, and approved.

Uploaded by

คุณพ่อน้อง บิ๊กบอส
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
186 views1 page

Shell Dimension

This inspection record documents the dimensional inspection of a strainer shell length. Measurements were taken at four orientation points (0, 90, 180, 270 degrees) and found to be within the specified tolerance of ±6 at each point, with actual measurements of 735 and drawings specifying 731. The inspection results were recorded, reviewed, and approved.

Uploaded by

คุณพ่อน้อง บิ๊กบอส
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

PAGE NO.

: 1 OF 1
DIMENSION INSPECTION RECORD REPORT NO. : PL-6025-1-DI-00
FOR SHELL LENGTH DATE : 15 January 2018

PROJECT NAME : BUC PUMP RELOCATE ITEM NO. : STRAINER

CLIENT : BANGCHAK CORPORATION PUBLIC.CO.,LTD. DRAWING NO./REV. : N/A

PROJECT NO. : 6025-1 DESIGN CODE : ASME SEC.VIII

The Sketch Part

Orientation 0° 90° 180° 270°

Check Point A B C D

Drawing 731 731 731 731


Tolerance ±6 ±6 ±6 ±6
Actual Check 735 735 735 735
Division +4 +4 +4 +4
Result Acc Acc Acc Acc

Maesuring and/or Testing Equipment


Used/Serial No.:
1.) STEEL TAP 5 M.
2.)

RECORDED BY PILIN QC ENGINEER/APPROVED/BY PILIN REVEWED/WITNESSED/BY KESSEL

NAME / SIGN /DATE NAME / SIGN /DATE NAME / SIGN /DATE

You might also like