Scribd
Upload
124 views2 pages

PCS9875 GPS

The PCS-9785 satellite-synchronized clock is used in substation automation systems to synchronize the time of devices like protection relays and fault recorders. It can receive timing signals from a GPS/BDS antenna in master mode or from another clock source in slave mode. The clock offers high accuracy with errors of less than 1 microsecond per hour. It supports various communication protocols for synchronization including IEEE 1588, SNTP/NTP, PRP, and HSR. The device stores diagnostic and status records internally and provides a flexible and redundant solution for building reliable clock synchronization systems.

Uploaded by

Quân Bùi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
124 views2 pages

PCS9875 GPS

The PCS-9785 satellite-synchronized clock is used in substation automation systems to synchronize the time of devices like protection relays and fault recorders. It can receive timing signals from a GPS/BDS antenna in master mode or from another clock source in slave mode. The clock offers high accuracy with errors of less than 1 microsecond per hour. It supports various communication protocols for synchronization including IEEE 1588, SNTP/NTP, PRP, and HSR. The device stores diagnostic and status records internally and provides a flexible and redundant solution for building reliable clock synchronization systems.

Uploaded by

Quân Bùi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

www.nrec.

com/en

PCS-9785
Satellite-Synchronized Clock

The PCS-9785 satellite-synchronized clock is usually used in


Substation Automation System (SAS) to satisfy the time unifying
Features
requirements of protection relay, disturbance fault recorder and • Remote supervision
other IEDs. Two kinds of PCS-9785 can be adopted to build a This device supports local SCADA and remote control centre
higher reliable and accuracy clock synchronization system in communication in using of protocols such as IEC 61850 to
substation. The source clock can receive timing signals from realize the device running status supervision.
its own GPS/BDS antenna (Master Mode), while the extension
clock receives IRIG-B signals from other clock source (Slave • Time service
Mode). This device supports GPS (Global Positioning System) and

Automation System

Figure 1 Typical application

133
Protection Automation Control

BDS (BeiDou Navigation Satellite System). In addition, it PPH (Pulse Per Hour), IRIG-B signal, timing message (serial),
supports antenna transmission time delay compensation. SNTP/NTP timing message (network), IEEE 1588 signal, etc.

• Signal reception • Output interface


This device provides several reception channels for IRIG-B Various kinds of output interfaces are provided, including RS-
signal via its optical port or RS-485/422 port. In addition, it 484, RS-232, TTL, dry contact, AC modulation, optic fiber,
supports link-based reception time delay compensation. RJ45, etc.

• High accuracy • Dual power supplies redundancy


The device accuracy is high in long term. The punctual error Dual power supply module is an option. The extra power
LVOHVVWKDQȝVSHUKRXU supply module will be placed at the other side of the device
rack and works independently.
• IEEE 1588 protocol
This device supports the IEEE 1588 protocol (BC mode • Double devices redundancy strategy
and OC mode) for clock synchronization in SNTP or PRP With a interconnection in using of IRIG-B signal, a set of two
network. PCS-9785 can form the "dual device dual network" redundancy
strategy to provide a higher reliable and accuracy clock
• SNTP/NTP protocol synchronization system.
This device supports the SNTP/NTP protocol and can work
as a network time server. • Output interface extension
The output interface extension is very flexible. In addition,
• PRP/HSR the enormous interfaces are isolated to each other.
This device supports the Parallel Redundancy Protocol (PRP)
and High-availability Seamless Redundancy (HSR). • Easy synchronization bus extension
It is simple to extend the time synchronization bus by adding
• Recording a new PCS-9785 extension device.
Automatically, this device stores all the self-diagnostic record,
binary status change and service log in its internal storage. • Human machine interface
The friendly HMI provides large scale LCD and navigation
• Output clock synchronization signal keypad for the display of real time, satellite tracking status,
The kinds of output clock synchronization signal is rich, IRIG-B inputting status, current clock source, etc.
including PPS (Pulse Per Second), PPM (Pulse Per Minute),

134

You might also like