Scribd
Upload
127 views4 pages

True Position Format

The document contains dimensional inspection results for multiple hexagonal parts. It includes the drawing specification, actual measurement values, inspection results, and calculated bonus amounts for dimensional tolerances at different locations on the parts. Bonus amounts are summed for each part based on the individual location tolerances.

Uploaded by

murali4095
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
127 views4 pages

True Position Format

The document contains dimensional inspection results for multiple hexagonal parts. It includes the drawing specification, actual measurement values, inspection results, and calculated bonus amounts for dimensional tolerances at different locations on the parts. Bonus amounts are summed for each part based on the individual location tolerances.

Uploaded by

murali4095
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 4

DIMN RESULTS

True position Bonus calculation


Hex
no.
Hole Dia at Actual Dia Dia C at Actual Dia Dia D at Total
Dwg Spec Bonus Total spec Actual Result Hole Dia Bonus1 Bonus2 Bonus3
MMC C MMC D MMC Bonus

34 Ø0.25 M A C M D M

0.25 0.46 0.71 0.21 Ok 6.51 6.35 0.16 6.50 6.35 0.15 6.50 6.35 0.15 0.46

0.25 0.45 0.70 0.11 Ok 6.50 6.35 0.15 6.50 6.35 0.15 6.50 6.35 0.15 0.45
1
0.25 0.45 0.70 0.19 Ok 6.50 6.35 0.15 6.50 6.35 0.15 6.50 6.35 0.15 0.45

0.25 0.46 0.71 0.29 Ok 6.51 6.35 0.16 6.50 6.35 0.15 6.50 6.35 0.15 0.46

0.25 0.48 0.73 0.28 Ok 6.51 6.35 0.16 6.50 6.35 0.15 6.52 6.35 0.17 0.48

0.25 0.47 0.72 0.18 Ok 6.50 6.35 0.15 6.50 6.35 0.15 6.52 6.35 0.17 0.47
2
0.25 0.48 0.73 0.08 Ok 6.51 6.35 0.16 6.50 6.35 0.15 6.52 6.35 0.17 0.48

0.25 0.47 0.72 0.30 Ok 6.50 6.35 0.15 6.50 6.35 0.15 6.52 6.35 0.17 0.47

0.25 0.42 0.67 0.12 Ok 6.50 6.35 0.15 6.49 6.35 0.14 6.48 6.35 0.13 0.42

0.25 0.42 0.67 0.20 Ok 6.50 6.35 0.15 6.49 6.35 0.14 6.48 6.35 0.13 0.42
3
0.25 0.41 0.66 0.17 Ok 6.49 6.35 0.14 6.49 6.35 0.14 6.48 6.35 0.13 0.41

0.25 0.43 0.68 0.24 Ok 6.51 6.35 0.16 6.49 6.35 0.14 6.48 6.35 0.13 0.43

0.25 0.43 0.68 0.01 Ok 6.51 6.35 0.16 6.49 6.35 0.14 6.48 6.35 0.13 0.43

0.25 0.42 0.67 0.26 Ok 6.50 6.35 0.15 6.49 6.35 0.14 6.48 6.35 0.13 0.42
4
0.25 0.41 0.66 0.29 Ok 6.49 6.35 0.14 6.49 6.35 0.14 6.48 6.35 0.13 0.41

0.25 0.43 0.68 0.18 Ok 6.51 6.35 0.16 6.49 6.35 0.14 6.48 6.35 0.13 0.43

0.25 0.44 0.69 0.29 Ok 6.50 6.35 0.15 6.51 6.35 0.16 6.48 6.35 0.13 0.44

0.25 0.43 0.68 0.29 Ok 6.49 6.35 0.14 6.51 6.35 0.16 6.48 6.35 0.13 0.43
5
0.25 0.43 0.68 0.31 Ok 6.49 6.35 0.14 6.51 6.35 0.16 6.48 6.35 0.13 0.43

0.25 0.44 0.69 0.09 Ok 6.50 6.35 0.15 6.51 6.35 0.16 6.48 6.35 0.13 0.44
BRACKET - DIMN RESULTS

X
0,0

True position Bonus calculation


Hex
no.
Dwg Spec Bonus Total spec Actual Result Actual Dia E Dia E at MMC Bonus

19 Ø0.25 M A B

1 0.25 0.89 1.14 0.43 Ok 18.09 17.20 0.89

2 0.25 0.89 1.14 0.35 Ok 18.09 17.20 0.89

3 0.25 0.90 1.15 0.33 Ok 18.10 17.20 0.90

4 0.25 0.90 1.15 0.68 Ok 18.10 17.20 0.90

5 0.25 0.88 1.13 0.31 Ok 18.08 17.20 0.88


BRACKET - DIMN RESULTS

X
0,0

True position Bonus calculation


Hex
no.
Hole Dia at Actual Dia Dia E at Total
Dwg Spec Bonus Total spec Actual Result Hole Dia Bonus1 Bonus2
MMC E MMC Bonus

23 Ø0.20 M B E M A

0.20 1.09 1.29 0.40 Ok 6.80 6.60 0.20 18.09 17.20 0.89 1.09

1 0.20 1.03 1.23 0.28 Ok 6.74 6.60 0.14 18.09 17.20 0.89 1.03

0.20 1.04 1.24 0.15 Ok 6.75 6.60 0.15 18.09 17.20 0.89 1.04

0.20 1.06 1.26 0.53 Ok 6.77 6.60 0.17 18.09 17.20 0.89 1.06

2 0.20 1.02 1.22 0.37 Ok 6.73 6.60 0.13 18.09 17.20 0.89 1.02

0.20 1.05 1.25 0.20 Ok 6.76 6.60 0.16 18.09 17.20 0.89 1.05

0.20 1.11 1.31 0.24 Ok 6.81 6.60 0.21 18.10 17.20 0.90 1.11

3 0.20 1.10 1.30 0.27 Ok 6.80 6.60 0.20 18.10 17.20 0.90 1.10

0.20 1.10 1.30 0.36 Ok 6.80 6.60 0.20 18.10 17.20 0.90 1.10

0.20 1.10 1.30 0.65 Ok 6.80 6.60 0.20 18.10 17.20 0.90 1.10

4 0.20 1.09 1.29 0.65 Ok 6.79 6.60 0.19 18.10 17.20 0.90 1.09

0.20 1.10 1.30 0.53 Ok 6.80 6.60 0.20 18.10 17.20 0.90 1.10

0.20 1.07 1.27 0.41 Ok 6.79 6.60 0.19 18.08 17.20 0.88 1.07

5 0.20 1.07 1.27 0.29 Ok 6.79 6.60 0.19 18.08 17.20 0.88 1.07

0.20 1.08 1.28 0.15 Ok 6.80 6.60 0.20 18.08 17.20 0.88 1.08
BRACKET - DIMN RESULTS

0,0
X

True position Bonus calculation


Hex
no.
Hole Dia at Actual Dia Dia E at Total
Dwg Spec Bonus Total spec Actual Result Hole Dia Bonus1 Bonus2
MMC E MMC Bonus

38 Ø0.25 M A E M B

0.25 1.03 1.28 0.74 Ok 6.24 6.10 0.14 18.09 17.20 0.89 1.03

1 0.25 0.95 1.20 0.75 Ok 6.16 6.10 0.06 18.09 17.20 0.89 0.95

0.25 0.97 1.22 0.50 Ok 6.18 6.10 0.08 18.09 17.20 0.89 0.97

0.25 0.99 1.24 0.33 Ok 6.20 6.10 0.10 18.09 17.20 0.89 0.99

2 0.25 0.97 1.22 0.53 Ok 6.18 6.10 0.08 18.09 17.20 0.89 0.97

0.25 0.95 1.20 0.82 Ok 6.16 6.10 0.06 18.09 17.20 0.89 0.95

0.25 1.02 1.27 0.57 Ok 6.22 6.10 0.12 18.10 17.20 0.90 1.02

3 0.25 1.00 1.25 0.72 Ok 6.20 6.10 0.10 18.10 17.20 0.90 1.00

0.25 1.02 1.27 0.81 Ok 6.22 6.10 0.12 18.10 17.20 0.90 1.02

0.25 0.96 1.21 0.67 Ok 6.16 6.10 0.06 18.10 17.20 0.90 0.96

4 0.25 1.02 1.27 0.55 Ok 6.22 6.10 0.12 18.10 17.20 0.90 1.02

0.25 1.00 1.25 0.80 Ok 6.20 6.10 0.10 18.10 17.20 0.90 1.00

0.25 0.96 1.21 0.81 Ok 6.18 6.10 0.08 18.08 17.20 0.88 0.96

5 0.25 0.98 1.23 0.75 Ok 6.20 6.10 0.10 18.08 17.20 0.88 0.98

0.25 0.94 1.19 0.64 Ok 6.16 6.10 0.06 18.08 17.20 0.88 0.94

You might also like