1.

Contents of the box

A: Watch

B: Charging Base

C: User Manual

D: USB Charging Cable

2. Getting Started

a) Put the watch on the charging base and insert the Micro-USB port into the base.

b) Connect the USB Cable to the power supply. Once connected, a power charging icon as this

will appear on the watch screen. When the watch is fully charged, the icon must be

this .

c) Normally, it takes 1.5 hours to get the watch fully charged. When it's on low-battery status,

the icon will appear on the screen.

Please note that the watch has two power sources: 1) coin battery for powering the hand
movement and 2) lithium battery for powering the rest of the module. When the lithium
battery is drained, the watch will continue to keep time.

3. Activating Your Watch

The watch is in an inactive state when used for the first time and the device screen

should display: . To activate, long press the pusher (or tap the screen) for 3s to
activate the watch. The phone’s screen will switch to the main menu and must display

this . The watch is now activated.

4. Installing the App

For Android Users:

1. Check if your mobile device is compatible with the app. The required operating
system (OS) is Android 5.0, or newer versions.
2. Simply go to your Google Playstore.
3. Type Aviator F-Series Mark 2 on the search bar and then click Install.
4. Check out https://play.google.com/store/apps/details?id=com.aviator for
reference.
 For iOS Users:
1. Check if your mobile device is compatible with the app. The required operating
system (OS) is iOS8 and above.
2. Simply go to your Appstore.
3. Type Aviator F-Series Mark 2 on the search bar and then click Get.
4. Check out https://itunes.apple.com/us/app/aviator-f-series-mark-
2/id1440254854 for reference.

5. Pairing the Watch with Your Phone:

1. Turn on the Bluetooth on your smartphone and make sure you are connected to
a stable internet connection.

2. Install the app "Aviator F-Series Mark 2" on your mobile device. New users are
required to register before pairing.

3. Long press the pusher button (or display) to get the serial number (example

). Put your watch close to your mobile device and search for the serial
number in your phone’s Bluetooth settings to connect.

4. When connecting with the correct serial number, a pair request icon will
appear on the screen. Please press the watch 2H (second hand) pusher or the
display to accept the request.
 5. Once pairing is successful the watch will display the following: on the
screen and your mobile device will get a pairing notification as well. If it failed to
pair, please go to the app’s "Setting" and click "Unpair" to restart and repeat the
above steps again. The app can only pair with one watch at a time so you have to
unpair the present one first and then connect it after with new watch devices.

Note: iOS users will receive a Bluetooth pairing request on their phones too.
Please, accept it.

6. Display and Notifications Menu

Press the watch button (or tap the display) to switch the screen interface.

7. Watch Display Options

Date, Week, Battery display

The watch's date, week, and battery will be in sync automatically with your mobile device
when connecting with the app. You can set the main menu display content in the
application as well.

8. Activity Goals Setting

The watch will record your step count, distance walked for the whole-day, and calories burnt
on a daily basis.

Steps Calories Distance

You can track your progress status anytime in the app’s homepage, and check the
details of daily, weekly, and monthly data by clicking and entering that function.

9. Sleep Data

You need to activate and set Sleep Monitoring Function in the app for first time use
(setting the Preset Sleep settings).

10. Heart Rate Monitoring

Make sure that the watch is firmly set on your hand and press the button (or

display) to go to the heart rate monitoring page . A long press for 3s on this
screen will start the test and it will last for around 15s for testing. During this period, the
watch will show this icon . After a minute, it will get result with vibration and
will exit automatically.

When the user’s heart rates are out of range in the app’s setting, it will show the

high or low icons such as the following: .

If you want to exit in advance, please long press for 3s to exit the function.

11. Battery

You can check the battery of the watch on the home page while the date icon can
be chosen from the app.

12. Notifications

In the app, click Settings ＞ Notifications and enable the desired notifications then
synchronize each notification with the watch. If you want to remove some notifications,
please slide the radio button to the left and click the watch screen to cancel the
notification. Otherwise, the notification will show up again next time when the screen is
activated.

Message icon Email icon Social media icon

Calendar icon Missed call icon Anti-lost icon

 Android Users: You have to enable LeClock APP notifications in your phone

Settings -> APP Management -> Leclock notifications

iOS Users: You have to enable banners in your device app list (Email, Wechat
etc. as shown on the picture below)

13. Reminder

In the app, go to Settings ＞ Reminders, then click “+” to add reminders. You can set
six (6) kinds of daily reminders and you may select the provision type, preference time,
and date. Your watch will vibrate slightly and display the corresponding reminder icon to
remind you. Click the watch to cancel the reminder.

Sport Sleep Wake up

Medicine Eat Customized

14. Activity Goals Setting

Select Settings ＞ Goals on the app to set your goals for daily walking step, walking
distance, calories, and sleep hours. When the goal is reached, your watch will vibrate
slightly and display the ‘goals achieved’ icon as below.

15. Memory Full Reminder

When the memory is lacking in storage, it will prompt a reminder with vibration.
Please log in the app and sync your watch.

16. Firmware update

You can update the firmware of your watch by using the app.

Enter app then go to “Settings > Device Manage”, click Upgrade Device.

Click ‘Upgrade’ to enter the update interface. The app will automatically detect
the latest firmware. If the new firmware is available, an ‘Update’ button will appear.

The watch will show an update icon when upgrading and will return to
the main menu after the upgrade completion. If it fails, please try again.

17. Remarks

a) Please charge your watch in time when it is in low-battery status using the
standard battery charging device and follow the charging instructions.
 b) The device has a built-in battery. Do not disassemble this and please avoid
dropping, puncturing or cutting the said battery by yourself.

c) Please do not put the device near a fire or throw it into the fire.

d) Please put the device in a place that kids cannot reach.

e) Please do not use damaged or aged batteries. Avoid touching your eyes and skin
when the battery is broken or leaking. When it happens, please rinse the affected part/s
with water immediately and go to the hospital.

Tip: Please dispose the battery in accordance with the local laws and regulations.
Remember that a battery is not an ordinary garbage and requires a proper way of
disposal.