Delta S4 Operator Manual
Compressor (AF Compressors)
Delta S4 Operator Manual V1.0
Delta S4 Operator Manual
Table of contents
1. SAFETY RULES.........................................................................................................................................3
2. GETTING STARTED ..................................................................................................................................4
2.1 MAIN SCREENS .........................................................................................................................................4
3. PARAMETERS .........................................................................................................................................6
3.1 OPERATING PARAMETER (P100) ...................................................................................................................6
3.1.1 PARAMETERS DEFINITIONS .................................................................................................................................. 6
3.2 SEQUENCER PARAMETER (P200) ...................................................................................................................7
3.2.1 PARAMETER DEFINITION ..................................................................................................................................... 7
3.3 COMPRESSOR CONFIGURATION (P300) ...........................................................................................................8
3.3.1 PARAMETER DEFINITION ..................................................................................................................................... 8
3.3.2 COMPRESSOR 1 CONFIGURATION MENU (P301)..................................................................................................... 9
3.4 SETPOINTS (P400) ................................................................................................................................. 10
3.4.1 PARAMETER DEFINITION ................................................................................................................................... 10
3.5 DIGITAL OUTPUT OVERVIEW (P600)............................................................................................................. 11
3.5.1 SCREEN OVERVIEW .......................................................................................................................................... 11
3.6 DIGITAL INPUT OVERVIEW (P700) ............................................................................................................... 12
3.6.1 SCREEN OVERVIEW .......................................................................................................................................... 12
3.7 IP CONFIGURATION (P800) ....................................................................................................................... 13
3.8 BUS RS485 (P900)................................................................................................................................. 13
Delta S4 Operator Manual v1.0 2 / 13
Delta S4 Operator Manual
1. Safety Rules
1. Personnel must have the required qualifications for carrying out any work on the machine.
2. The personnel must act in accordance with the existing safety regulations.
3. Laws, regulations, directives and standards must be obeyed.
4. The user-owner of the machine must meet the necessary obligations to ensure that the machine can be operated
safely.
5. The machine may only be used for the purpose for which it is designed.
6. The machine is safe to operate but please note, however, that it still presents residual risks which must be taken
into account.
7. Bear in mind that energy systems, operating and processing materials, and emissions are potentially hazardous.
8. The safe and technically perfect condition of the machine is essential for the operational safety of the machine and
the safety of personnel.
9. The safety and protective equipment on the machine is designed to protect the personnel and the machine.
Therefore, make sure that these devices always operate properly and are ready for operation: Do not tamper with
the safety and protective devices.
10. Obey the current regulations and instructions to ensure that you act correctly and safely in dangerous situations or
in the event of accidents.
Delta S4 Operator Manual V1.0 3 / 13
Delta S4 Operator Manual
2. Getting Started
2.1 Main Screens
1. Main screen: Displays information about the state
of every compressor connected and virtual buttons
(and the corresponding F1 to F8 physical buttons)
⚠ The Trend option is currently under
development.
Figure 1: Main screen
2. Menu: From virtual button you can select:
P100 or “OP”: Operator parameters
P200 or “Seq”: Sequencer Parameters
P300 or “Conf”: Compressor Config
P400 or “Set”: Setpoints
P600 or “DO”: Digital Outputs overview
P700 or “DI”: Digital Inputs overview
P800 or “NET”: IP Config
P900 or “BUS”: RS485 Bus
Figure 2: Menu
3. Sequence view: This screen shows the priority and
the rank of every machine connected to the
system.
Figure 3: Sequence view
Delta S4 Operator Manual V1.0 4 / 13
Delta S4 Operator Manual
4. Counters: Show the percentage of use of any
connected machine as well as their own total
running hours and Kwh consumption.
Figure 4: Counters
5. Production information : Screen that shows
information about the overall production and cost:
Air production
Efficiency
Load Rate
Costs
Figure 5: Production information
6. AF menu: On this menu, you can change the
following parameter for every connected machine:
Serial Number
Ranking
Power (kw) for Full load, Half load and Unload
Air flow production for Full load and Half load
(m³/min)
This screen also shows the Priority and power
efficiency (kw/m³).
A password is required to access this screen.
Figure 6: AF menu
7. Information : Screen that show comprehensive
information about the system such as:
System's model
Serial number of the system
Software version
Software Date
HMI software version
PLC software version
This screen is accessible by pressing the AF logo at
the upper right of the MAIN screen.
Figure 7: Information
Delta S4 Operator Manual V1.0 5 / 13
Delta S4 Operator Manual
3. Parameters
3.1 Operating Parameter (P100)
Figure 8: Operating parameter
3.1.1 Parameters definitions
P101 Unload Pressure Setpoint
P102 Load Pressure Setpoint
P103 Tolerance Setpoint
P104 AFS Pressure Setpoint for AFS only
P105 Min Network Pressure Setpoint
P106 Set Time and Date Change time and date
P107 Pressure Unit Select Pressure Unit (bar or PSI)
P108 Temperature Unit Select Temperature Unit (°C or °F)
P109 Languages Change language (English, French, German, Dutch)
P110 Not use Not use
Delta S4 Operator Manual V1.0 6 / 13
Delta S4 Operator Manual
Figure 9: Set
date and time
Figure 10: Languages
3.2 Sequencer Parameter (P200)
Figure 11: Sequencer parameter
3.2.1 Parameter definition
P201 Regulation mode Select between smart and graduated (password required)
P202 Rotation interval Set rotation interval
P203 Nb of compressors Set number of compressors
P204 Nb of cycles (smart) Select number of cycle (Smart regulation mode only)
Delta S4 Operator Manual V1.0 7 / 13
Delta S4 Operator Manual
3.3 Compressor Configuration (P300)
Figure 12: Compressor configuration
3.3.1 Parameter Definition
P301 Compressor 1 Set up Compressor 1
P302 Compressor 2 Set up Compressor 2
P303 Compressor 3 Set up Compressor 3
P304 Compressor 4 Set up Compressor 4
P305 Compressor 5 Set up Compressor 5
P306 Compressor 6 Set up Compressor 6
P307 Compressor 7 Set up Compressor 7
P308 Compressor 8 Set up Compressor 8
P309 Not use Not use
P310 Not use Not use
Delta S4 Operator Manual V1.0 8 / 13
Delta S4 Operator Manual
3.3.2 Compressor 1 configuration menu (P301)
Figure 13: Compressor 1 configuration
This menu is accessible from the configuration compressor menu by pressing the specific "Configuration" button (see figure
13) and is mainly used to modify the AFS regulation parameter (password required for any change).
Without a password, you can only change the name of the compressor.
3.3.2.1 Screen overview
Compressor's name Set Compressor name (no password needed)
AFS Regulation Activate or not AFS Regulation mode
Ranking Set the Rank of the compressor (order of use)
100% - 50% - 0% Set power and air flow for each state of the AFS regulation
Total running Reset running time for specified compressor
Full load Change full load time for specified compressor
Half load Change half load time for specified compressor
Unload Change unload time for specified compressor
Delta S4 Operator Manual V1.0 9 / 13
Delta S4 Operator Manual
3.4 Setpoints (P400)
Figure 14: Setpoints
3.4.1 Parameter Definition
Password required for any change
P401 Max Unload Pressure Setpoint
P402 Overpressure Setpoint
P403 Network Pr. Range Setpoint
P404 Function Select between Prestart or External function
Delta S4 Operator Manual V1.0 10 / 13
Delta S4 Operator Manual
3.5 Digital Output Overview (P600)
Figure 15: Digital output overview
On this screen, you can follow the state of every digital outputs and/or test them.
⚠ Digital Outputs can only be tested when the machine is stopped.
3.5.1 Screen overview
Sequence If LED is ON, Sequence active
C5-100% If LED is ON, compressor C5 at 100%
C5-50% If LED is ON, compressor C5 at 50%
C6-100% If LED is ON, compressor C6 at 100%
C6-50% If LED is ON, compressor C6 at 50%
C7-100% If LED is ON, compressor C7 at 100%
C7-50% If LED is ON, compressor C7 at 50%
C8-100% If LED is ON, compressor C8 at 100%
C8-50% If LED is ON, compressor C8 at 50%
DS4 Error If LED is ON, Delta S4 error
Delta S4 Operator Manual V1.0 11 / 13
Delta S4 Operator Manual
3.6 Digital Input Overview (P700)
Figure 16: Digital input overview
On this screen, you can follow the state of every digital inputs.
3.6.1 Screen overview
C5-Run If the LED is green, Compressor C5 is running
C5-Load If the LED is orange, Compressor C5 is loading
C5-Available If the LED is blue, Compressor C5 is available
C6-Run If the LED is green, Compressor C6 is running
C6-Load If the LED is orange, Compressor C6 is loading
C6-Available If the LED is blue, Compressor C6 is available
C7-Run If the LED is green, Compressor C7 is running
C7-Load If the LED is orange, Compressor C7 is loading
C7-Available If the LED is blue, Compressor C7 is available
C8-Run If the LED is green, Compressor C8 is running
C8-Load If the LED is orange, Compressor C8 is loading
C8-Available If the LED is blue, Compressor C8 is available
External External
24VDC Presence of 24VDC
Delta S4 Operator Manual V1.0 12 / 13
Delta S4 Operator Manual
3.7 IP Configuration (P800)
Figure 17: IP Configuration
On this screen, you can change the IP address and id /port for each connections or add a new one.
There is the possibility to change manually the port by selecting the "manual" option from the drop down list.
A password is required for any change.
3.8 Bus RS485 (P900)
Figure 18: Bus RS485
On this screen, you can create a new RS485 Bus communication and/or configure its address.
A password is required for any change.
Delta S4 Operator Manual V1.0 13 / 13
