Auction Catalogue

Auction conducted by mjunction services ltd

SALE OF INDUSTRIAL BY-PRODUCTS MANAGEMENT DIVISION (IBMD) MATERIALS OF TATA STEEL/ Sheet Cutting-Palwal STY Sheet Cutting Auction- Ex CA, TATA
STEEL - Sheet Cutting Ex CA- TSL Palwal Auction dt 10.05.23
being sold on “AS-IS-WHERE-IS” and “NO-COMPLAINT” Basis.

Mandate Number: TS23285042

Seller: Tata Steel Limited
Auction website: https://www.metaljunction.com
Inspection Date & Time: 09-05-23 AT 10:30 AM
e-Auction Date & Time: 10-05-23 AT 12:00 NOON

Contact Details: Contact person for Inspection : Hind terminal Pvt Ltd complex, Baghola-Janouli Link Road / 121102
PALWAL : @vipul
([email protected]) Phone : 8882888748 /7011379611/ 9899040507
mjunction services ltd: Category Manager
Address: Palwal (Haryana) STY Contact Details : Hind terminal Pvt Ltd complex, Baghola-Janouli Link Road / 121102 PALWAL :
@vipul ([email protected]) Phone : 8882888748 /7011379611/ 9899040507

Post Auction Related Contact Details

E-mail id (For Tata Steel IBMD
Area/Purpose Contact No.
auctions)
Lot Confirmation Related 033-44091849 / 44091789 / 8336033395

Money Receipt Section/Payment

033-44091807/8336988819 [email protected]
Related
Delivery Order Related 033-44091806/8336988814 [email protected]

CIN L27100MH1907PLC000260
 033-66011719 / 44091719 /
Material Value Refund Related [email protected]
8336988825
033-44091849 / 44091789 /
TCS Related [email protected]
66106326 / 8336033395
Payment Deviation/Disablement in Tata 033-66031759 / 44091882 /
[email protected]
Steel 8336993678
Collection of Delivery Order for Tata
0657-6519985 / 7033098848 [email protected]
Steel- Jamshedpur
Collection of Delivery Order for Tata
7328820748 / 7328804998 [email protected]
Steel- Kalinganagar
Type in www.metaljunction.com> Go to "Important Links"
For time bound resolution of unresolved issues log into our
> Click on "Customer Complaints"> Log in with your user
customer care portal
id and password and write the details of issue.

For Any unresolved Issues beyond two (02) days mail to Mjunction :

: Rajeev Upadhyaya [email protected]

Copy to mjunction
Copy to Tata Steel Ltd : - Anil Kumar <[email protected]>, Arindam Chakrabarti
<[email protected]>

CCO LIST

CCO
REGI PHONE PHONE
COORDINAT EMAIL ID CCO CITY STATE EMAIL ID
ON NO NO
OR

NORT ABHISHEK 96546944 abhishek.kumar@mjunction PRAVEEN GHAZIABAD UTTAR 97170104 [email protected]

H KUMAR 15 .in KUMAR PRADESH 58

CIN L27100MH1907PLC000260
 VIRENDER FARIDABAD HARYANA 99580011 [email protected]
DHANIYA 57

HARJINDER LUDHIANA PUNJAB 92169601 [email protected]

SINGH 69

VIKALP JAIPUR RAJASTHAN 80586589 [email protected]

SHRIVASTAVA 99

VIKAS SOKAR KANPUR UTTAR 97940023 [email protected]

PRADESH 33

BHANU HARIDWAR UTTARAKHA 93594055 [email protected]

PRAKASH ND 16

PARSI KALINGANAG ODISHA 75960077 [email protected]

SAINARESH AR 96

SHYAM JAMSHEDPU JHARKHAND 75950753 [email protected]

SUNDER R 07

EAST VACCANT VACCANT VACCANT MISHRA

KAMLESH RAIPUR CHHATTISG 90097778 [email protected]

GHODE ARH 60

PUSHPENDRA BOKARO JHARKHAND 88730360 [email protected]

KUMAR 25 n

ANUP SARKAR DURGAPUR WEST 83369301 [email protected]

BENGAL 06

CIN L27100MH1907PLC000260
 SANJAY HOWRAH WEST 91633482 [email protected]
GOPAL BENGAL 69
SINGHA

SUSANT ROURKELA ODISHA 73288207 [email protected]

KUMAR 47
DAS

SOUMEN KOLKATA WEST 91633482 [email protected]

GHOSH BENGAL 29

SANTOSH INDORE MADHYA 97130713 [email protected]

BAGHEL PRADESH 39

PANKAJ NAGPUR MAHARASHT 70309148 [email protected]

NAGPURE RA 55

WEST VACCANT VACCANT VACCANT HEMANT PUNE MAHARASTR 70302313 [email protected]

SHRIVASTAVA A 11

TEJAS RAJKOT GUJARAT 70031579 [email protected]

SOMANI 67

VISHWANATH MUMBAI MAHARASTR 77380211 [email protected]

PANDEY A 28 n

RAGHAVENDR HYDERABAD TELANGANA 80086668 Madduri.raghavendra@mjunction

S A 55 .in
SOUT 98409359 [email protected]
RAGHAVEN MADDURI
H 53 n
DRA
KALAJ SELVAN CHENNAI TAMIL NADU 89398562 [email protected]
J 56

CIN L27100MH1907PLC000260
 SATHESH BANGALORE KARNATAKA 91471236 [email protected]
HAYEN 83

New Safety Norms and Checklist for HMV/LMV

S.N Work Work related Responsibility Process / PPEs (How) Remarks/Referenc

o. hazrads/impact es
01 Safety:
General Ensure that all drivers/lifters are trained on
Unaware of
Awareness dangers of Transport park safety and the records are well maintained
steel plant Supervisor

CIN L27100MH1907PLC000260
 Unaware of use
Be sure to use PPE such as a safety helmet,
of PPEs
Unaware of All workers safety shoe, safety goggles, fluorescent
Tata Steel’s
jacket, dust mask.
Safety
Standards Check all PPE before inspection
Unaware of
Replace the faulty one immediately.
workplace
hazards Ensure that COVID 19 guidelines such as
Unaware of
social distancing, travel history, temperature
Covid-19 virus
check and use of face masks are followed.
Environment:- Not
Keep the required documents
Applicable
Driver of the

Quality:- Not vehicle

Applicable

CIN L27100MH1907PLC000260
 02
Checking of Verification of documents like Driving License,

documents
Driver's Aadhar Card/Voter Card, PPE, Vehicle

Registration Card/Book, Pollution Test, Permit,

Road Tax, Vehicle Fitness, Vehicle Parking Slip,

Work Order/DO Copy, Covid Test and Eye Test

Certificate

Entry of details in the register

Revealing the veracity of the documents to

the vehicle security checking team.

CIN L27100MH1907PLC000260
 03.
Vehicle Safety: Get the details of the vehicle checked from

safety check • Car colliosion the document verification team

•Run over Proceed to the parking lot for security check

• Vehicle rolling using the barricaded path.

• Slip/Trip/Fall Make sure to use proper PPE as per the

Transport park
Supervisor standard.

Environment: N/A Follow all road safety rules.

Quality: N/A Vehicles are to be checked as per Vehicle

Checklist. (Form no

SHE/WP/RRM/FOR/16)
It is to be ensured that no modification of
vehicle body or cabin so as to add storage
tanks, container etc which can interfere with
gross tare weight by adding or emptying the
liquid in it before gross/tare and thus
interfere with net weighment.

Do not use mobile in parking and during

vehicle checking.
Do not check vehicles parked in no parking
areas and outside the parking lot.

During inspection ensure proper body

condition of the vehicle and scotch block in

CIN L27100MH1907PLC000260
 the wheels

Maintain a safe distance from previously

checked vehicles.

If the vehicle is found to be fine as per the

checklist (tyres, blinkers, back camera,

head light, back horn etc.), the completed

checklist may be handed over to the

driver/lifter.

If the vehicle is not found in good condition,

then checklist with proper remarks is to be

given to the concerned driver/lifter for

rectification and re-examined after

rectification.

Ensure that no vehicle is checked more than

twice in a day

CIN L27100MH1907PLC000260
 04. Safety Safety:
training to Transport park
Check Vehicle Safety Checklist issued by
driver and • Safety training to Supervisor
issue of drivers • Workplace Vehicle Safety Checking Agency
security pass Safety
If vehicle is fine as per check list then
and photo
pass to driver Environment: N/A proceed for driver safety training.
Quality: N/A
Make sure that the concerned driver has

verified vehicle check list, Aadhar/Voter

card, driving license, vehicle parking slip,

work order/DO copy, eye check certificate

and proper PPE before making security

pass.

Driver is fit to drive the vehicle.

Drivers should be shown safety videos.

Following guidelines for mobile usage to be

given to Drivers:

o Heavy Vehicle /Mobile crane

/HEMM drivers should keep his
mobile in switch off or silent
mode while on driving seat. Mobile
phone should only be used after
stopping the vehicles appropriately

CIN L27100MH1907PLC000260
 .
(Cell Phone/Mobile phone
signifies any device that
makes or receives phone
calls, sends text messages,
surfs the Internet, or
downloads and allows for the
reading of and responding to
email, whether the device is
company owned or personally
owned. Earphones /
Headphones / Hands free /
Bluetooth enabled hearing
devices will be considered a
part of Cell Phone. It also
includes any type of music/
gaming device such as iPods,
Portable Music through
earphone etc.)

Make sure the driving license is verified

through the Mparivahan App.

The photo pass (entry gate pass) should be
made and handed over to the concerned
driver only after security training, verification
of ID (Aadhaar/Voter Card, Driving License,
Security Pass, Vehicle Parking Slip) of the
concerned driver and verification of
registration number of the concerned

CIN L27100MH1907PLC000260
 vehicle and verified checklist as well as DO
copy for IBMD vehicle and for supply/store
car
05 Transport park
loading advice to be made only after
Issuance of Supervisor
Safety: NA
loading checking paper like DO copy, vehicle safety
advice and
verified checklist, lifter authority etc.
GPS
Environment: NA
Entry of DO number in TSL(IBMD IS) system.

Check DO details in the system

Quality: N/A
If found correct, print out the loading advice

to be given after entering the loading

location as mentioned in the DO

After mapping the loading location, GPS
should be given as per the loading advice
issued to the driver.

CIN L27100MH1907PLC000260
 06. In case of any emergency, immediately inform the
Safety:
Emergency All Tata Steel following concerned agencies clearly mentioning
preparedness Bodily injury to any workers and the exact location of the incident. • Hire one person
. contract wokers as a guide, who will escort the agencies to the right
worker during the
location if the location is a bit internal. • Keep a fire
course of work. extinguisher and first aid box in the office
TSL Emergency no.: - 0657 66 47777
Fire Brigade – 06572645101
Environment: N/A First aid (East) - 0657 66 43214
First aid (West) - 0657 66 43412
Security officer – 9204652485
Quality: N/A Manager MRD- 9234500733 (Mobile)
Sr. Manager MRD- 9040094833 (Mobile)
Head (MR & SPP) - 9204058272 (Mobile)

FORMAT: SHE/WP/RRM/FOR/16
Checklist for HMV & LMV (Supply material, outbound material and Raw
material)

Vehicle Type: Capacity of the vehicle:

CIN L27100MH1907PLC000260
Vehicle Type: Capacity of the vehicle:

Vehicle Regd. No Projection details(mm):

Transporter Name Right Side: Left Side:

Consignment Type Length: Height:

SL. No. Items to be Inspected OK Not OK Remarks

1 PPE must be in good condition & available with driver/operator

2 General:

a) Front Wide shields – no crack, no scratches, and clear visibility.

b) Seat Belt in usable condition.

c) Physical Condition of Dallah /Bed.

d) Rear view mirror, Helper side – 03 Pcs & Driver side- 01 Pcs.

e) Visible registration number plate in front & rear side.

f) Wiper blade in working condition.

g) Scotch block in place at the time of parking.

h) Lights, Horn & Electrical :

Parking Light(Front & Rear).

Head Light & Dipper light

CIN L27100MH1907PLC000260
 Indicator Light (Front & Rear) with buzzer

Brake light (Rear & Side)

Reverse light

Trolley side light(If applicable)

Extended material

Reverse horn(Compulsory) & Camera

Main horn

Battery clamp condition & tightness

Self-starter (vehicle should start within 5-8sec). Tie rod end play(Within 20 to 30 mm)

3 Tyre Condition & Under Carriage:

a) Resoling /rethreading/surface plain in front wheel is not allowed.

b) If central part is at/thread depth less than 1 inch-Not ok(Only trailer may be allowed for
single
tyre problem. Supporting tyre to be ok).

c) Centre part of the tyre should not be at.

d) Any kind of side cut not allowed-depth more than ½ inch not allowed

e) Air pressure-Min 7kg/CM2 (Visual Checking).

CIN L27100MH1907PLC000260
4 R.U.P.G / S.U.P.G:

a) 550MM height from ground

b) Distance From horse (Cabin side)-500 mm.

c) Distance from Rear Tyre-300mm

5 Brakes:

a) Foot brake (Service brake)

b) Hand brake/Parking brake( No loose of brake chamber stud)

c) Fail safe brake ( It will work when air fall below 6.0 kg/cm2).

d) Trolley brake in working condition ( If applicable ).

e) Leakage from wheel brake actuators & hoses.

6 Others:

a) Alcohol Checking

b) Driving License
c) Diesel Level

7 Ensure safety during Transportation –If Applicable

a) Fixing Proper Wedge.

b) Side guard/post.

c) Welding of clit, wedge.

CIN L27100MH1907PLC000260
 d) Fixing of ag & caution light.

8 Chain: (Only For Trailers)

a) All link chains of 16 mm dia. of iron / 12mm dia. of steel (Test load = 6.3 t) as per IS
2429.

b) The chain shall be free from bent, twisted, damaged or cracked links.

c) Chain should not be hammered.

d) It must have Valid TPI certi cate & No. of chain :03.

9 D shackle:

1.D Shackle: D shackle of ¾”dia

2.Hook of 16mm dia

3.Locking pin: ¾” dia

10 Turn buckles of dia. 1 & 1/2 " diameter (38 MM) (test load = 6.3 t) as per IS 3121

11 Vehicle is without modification of body or cabin to add storage tanks, container etc which
can interfere with gross tare weight by adding or emptying the liquid in it before gross/tare
and thus interfere with net weighment.

For permanent gate pass

Sign. Of Vendor Representative ______________________________Vehicle Fitness Validity Up to___________________________Sign. Of TSL

representative___________________________

CIN L27100MH1907PLC000260
A.: Material details

LOT NO MATERIAL DESCRIPTION MATERI PLANT QTY. (in BATCH TCS % GST % LENGTH WIDTH THICKN
AL NO CODE MT) ESS

AC15423M0 AC15423M03 Rej. Scrap HR 2623 6.9450 AC15423 1% 18% - - -

3 Sheet 6.945 MT 1400008 M03
5.000X1500X1900 99

AC15423M0 AC15423M04 Rej. Scrap HR 2623 6.2420 AC15423 1% 18% - - -

4 Sheet 6.242 MT 1400008 M04
5.000X1500X1900 99
AC15423M0 AC15423M08 Rej. Scrap HR 2623 6.5740 AC15423 1% 18% - - -
8 Sheet 6.574 MT 1400008 M08
5.000X1500X1900 99

CIN L27100MH1907PLC000260
AC15423M1 AC15423M13 Rej. Scrap HR 2623 6.8120 AC15423 1% 18% - - -
3 Sheet 6.812 MT 1400008 M13
5.000X1500X1900 99
AC15423M1 AC15423M14 Rej. Scrap HR 2623 6.8100 AC15423 1% 18% - - -
4 Sheet 6.81 MT 5.000X1500X1900 1400008 M14
99
AC16423M0 AC16423M05 Rej. Scrap HR 2623 6.6960 AC16423 1% 18% - - -
5 Sheet 6.696 MT 1400008 M05
5.000X1500X1900 99
AC17423M0 AC17423M05 Rej. Scrap HR 2623 7.1540 AC17423 1% 18% - - -
5 Sheet 7.154 MT 1400008 M05
5.000X1500X1900 99
AC17423M0 AC17423M06 Rej. Scrap HR 2623 7.1600 AC17423 1% 18% - - -
6 Sheet 7.16 MT 5.000X1500X1900 1400008 M06
99
AC17423M0 AC17423M07 Rej. Scrap HR 2623 7.1600 AC17423 1% 18% - - -
7 Sheet 7.16 MT 5.000X1500X1900 1400008 M07
99
AC17423M0 AC17423M08 Rej. Scrap HR 2623 6.4800 AC17423 1% 18% - - -
8 Sheet 6.48 MT 5.000X1500X1900 1400008 M08
99
AC17423M1 AC17423M12 Rej. Scrap HR 2623 5.8020 AC17423 1% 18% - - -
2 Sheet 5.802 MT 1400008 M12
5.000X1500X1900 99
AC17423M1 AC17423M11 Rej. Scrap HR 2623 6.8100 AC17423 1% 18% - - -
1 Sheet 6.81 MT 5.000X1500X1900 1400008 M11
99

CIN L27100MH1907PLC000260
AC17423M1 AC17423M10 Rej. Scrap HR 2623 6.8020 AC17423 1% 18% - - -
0 Sheet 6.802 MT 1400008 M10
5.000X1500X1900 99
AC17423M0 AC17423M09 Rej. Scrap HR 2623 6.8120 AC17423 1% 18% - - -
9 Sheet 6.812 MT 1400008 M09
5.000X1500X1900 99
AC14423M0 AC14423M06 Rej. Scrap HR 2623 6.2700 AC14423 1% 18% - - -
6 Sheet 6.27 MT 5.000X1100X1900 1400008 M06
99
AC14423M0 AC14423M07 Rej. Scrap HR 2623 5.9520 AC14423 1% 18% - - -
7 Sheet 5.952 MT 1400008 M07
5.000X1100X1900 99
SF11423T07 SF11423T07 Rej. Scrap HR 2623 5.1180 SF11423 1% 18% - - -
Sheet 5.118 MT 1400008 T07
5.800X1250X1900 99
SF17423T28 SF17423T28 Rej. Scrap HR 2623 5.1340 SF17423 1% 18% - - -
Sheet 5.134 MT 1400008 T28
5.800X1500X1900 99
SF17423T26 SF17423T26 Rej. Scrap HR 2623 4.9880 SF17423 1% 18% - - -
Sheet 4.988 MT 1400008 T26
5.800X1500X1900 99
SF17423T20 SF17423T20 Rej. Scrap HR 2623 4.9600 SF17423 1% 18% - - -
Sheet 4.96 MT 5.000X1250X1900 1400008 T20
99
SF11423T32 SF11423T32 Rej. Scrap HR 2623 5.7860 SF11423 1% 18% - - -
Sheet 5.786 MT 1400008 T32
5.800X1250X1900 99

CIN L27100MH1907PLC000260
AC15423M0 AC15423M09 Rej. Scrap HR 2623 6.2050 AC15423 1% 18% - - -
9 Sheet 6.205 MT 1400008 M09
5.000X1250X1900 99
AC08423M2 AC08423M22 Rej. Scrap HR 2623 6.0600 AC08423 1% 18% - - -
2 Sheet 6.06 MT 5.000X1250X1900 1400008 M22
99
AC08423M2 AC08423M24 Rej. Scrap HR 2623 6.1400 AC08423 1% 18% - - -
4 Sheet 6.14 MT 5.000X1250X1900 1400008 M24
99
AC08423M2 AC08423M23 Rej. Scrap HR 2623 6.0600 AC08423 1% 18% - - -
3 Sheet 6.06 MT 5.000X1250X1900 1400008 M23
99
AC08423M2 AC08423M21 Rej. Scrap HR 2623 6.0560 AC08423 1% 18% - - -
1 Sheet 6.056 MT 1400008 M21
5.000X1250X1900 99
SF17423T23 SF17423T23 Rej. Scrap HR 2623 5.0800 SF17423 1% 18% - - -
Sheet 5.08 MT 5.000X1250X1900 1400008 T23
99
SF17423T22 SF17423T22 Rej. Scrap HR 2623 4.9660 SF17423 1% 18% - - -
Sheet 4.966 MT 1400008 T22
5.000X1250X1900 99
SF17423T21 SF17423T21 Rej. Scrap HR 2623 4.9500 SF17423 1% 18% - - -
Sheet 4.95 MT 5.000X1250X1900 1400008 T21
99
SF17423T19 SF17423T19 Rej. Scrap HR 2623 4.2950 SF17423 1% 18% - - -
Sheet 4.295 MT 1400008 T19
5.000X1250X1900 99

CIN L27100MH1907PLC000260
PS15423T73 PS15423T73 Rej. Scrap HR 2623 4.8050 PS15423 1% 18% - - -
Sheet 4.805 MT 1400008 T73
5.000X1200X1900 99
PS15423T72 PS15423T72 Rej. Scrap HR 2623 5.9900 PS15423 1% 18% - - -
Sheet 5.99 MT 5.000X1200X1900 1400008 T72
99
PS15423T71 PS15423T71 Rej. Scrap HR 2623 5.9900 PS15423 1% 18% - - -
Sheet 5.99 MT 5.000X1200X1900 1400008 T71
99
PS15423T70 PS15423T70 Rej. Scrap HR 2623 6.0100 PS15423 1% 18% - - -
Sheet 6.01 MT 5.000X1200X1900 1400008 T70
99
AC15423M0 AC15423M07 Rej. Scrap HR 2623 6.8460 AC15423 1% 18% - - -
7 Sheet 6.846 MT 1400008 M07
5.000X1500X1900 99
AC15423M1 AC15423M19 Rej. Scrap HR 2623 6.9320 AC15423 1% 18% - - -
9 Sheet 6.932 MT 1400008 M19
5.000X1500X1900 99
AC15423M1 AC15423M18 Rej. Scrap HR 2623 6.9220 AC15423 1% 18% - - -
8 Sheet 6.922 MT 1400008 M18
5.000X1500X1900 99
AC15423M1 AC15423M17 Rej. Scrap HR 2623 6.9100 AC15423 1% 18% - - -
7 Sheet 6.91 MT 5.000X1500X1900 1400008 M17
99
AC12423M1 AC12423M14 Rej. Scrap HR 2623 6.8420 AC12423 1% 18% - - -
4 Sheet 6.842 MT 1400008 M14
5.000X1500X1900 99

CIN L27100MH1907PLC000260
AC12423M1 AC12423M15 Rej. Scrap HR 2623 6.8340 AC12423 1% 18% - - -
5 Sheet 6.834 MT 1400008 M15
5.000X1500X1900 99
AC15423M0 AC15423M05 Rej. Scrap HR 2623 6.8320 AC15423 1% 18% - - -
5 Sheet 6.832 MT 1400008 M05
5.000X1500X1900 99
AC15423M0 AC15423M06 Rej. Scrap HR 2623 6.8300 AC15423 1% 18% - - -
6 Sheet 6.83 MT 5.000X1500X1900 1400008 M06
99
AC12423M1 AC12423M16 Rej. Scrap HR 2623 6.8220 AC12423 1% 18% - - -
6 Sheet 6.822 MT 1400008 M16
5.000X1500X1900 99
AC15423M2 AC15423M20 Rej. Scrap HR 2623 6.3640 AC15423 1% 18% - - -
0 Sheet 6.364 MT 1400008 M20
5.000X1500X1900 99
SF19423T01 SF19423T01 Rej. Scrap HR 2623 6.0700 SF19423 1% 18% - - -
Sheet 6.07 MT 5.000X1250X1900 1400008 T01
99
AC12423M1 AC12423M17 Rej. Scrap HR 2623 5.8100 AC12423 1% 18% - - -
7 Sheet 5.81 MT 5.000X1500X1900 1400008 M17
99
PS10423T73 PS10423T73 Rej. Scrap HR 2623 4.8950 PS10423 1% 18% - - -
Sheet 4.895 MT 1400008 T73
5.000X1200X1900 99
SF19423T04 SF19423T04 Rej. Scrap HR 2623 4.5550 SF19423 1% 18% - - -
Sheet 4.555 MT 1400008 T04
5.000X1250X1900 99

CIN L27100MH1907PLC000260
SF19423T05 SF19423T05 Rej. Scrap HR 2623 4.2540 SF19423 1% 18% - - -
Sheet 4.254 MT 1400008 T05
5.000X1250X1900 99
SF19423T03 SF19423T03 Rej. Scrap HR 2623 2.9420 SF19423 1% 18% - - -
Sheet 2.942 MT 1400008 T03
5.000X1250X1900 99
AC21423M2 AC21423M27 Rej. Scrap HR 2623 6.0680 AC21423 1% 18% - - -
7 Sheet 6.068 MT 1400008 M27
5.000X1250X1900 99
AC21423M2 AC21423M28 Rej. Scrap HR 2623 6.0540 AC21423 1% 18% - - -
8 Sheet 6.054 MT 1400008 M28
5.000X1250X1900 99
AC22423M0 AC22423M09 Rej. Scrap HR 2623 6.9500 AC22423 1% 18% - - -
9 Sheet 6.95 MT 5.000X1500X1900 1400008 M09
99
AC22423M1 AC22423M10 Rej. Scrap HR 2623 6.9460 AC22423 1% 18% - - -
0 Sheet 6.946 MT 1400008 M10
5.000X1500X1900 99
AC22423M1 AC22423M11 Rej. Scrap HR 2623 6.9480 AC22423 1% 18% - - -
1 Sheet 6.948 MT 1400008 M11
5.000X1500X1900 99
AC04423M1 AC04423M12 Rej. Scrap HR 2623 5.0200 AC04423 1% 18% - - -
2 Sheet 5.02 MT 5.000X1200X1900 1400008 M12
99
AC21423M2 AC21423M26 Rej. Scrap HR 2623 5.4320 AC21423 1% 18% - - -
6 Sheet 5.432 MT 1400008 M26
5.000X1250X1900 99

CIN L27100MH1907PLC000260
SF17423T27 SF17423T27 Rej. Scrap HR 2623 4.9960 SF17423 1% 18% - - -
Sheet 4.996 MT 1400008 T27
5.800X1500X1900 99
SF17423T25 SF17423T25 Rej. Scrap HR 2623 4.9900 SF17423 1% 18% - - -
Sheet 4.99 MT 5.800X1500X1900 1400008 T25
99
SF17423T24 SF17423T24 Rej. Scrap HR 2623 5.0050 SF17423 1% 18% - - -
Sheet 5.005 MT 1400008 T24
5.800X1500X1900 99
AC22423M0 AC22423M04 Rej. Scrap HR 2623 5.2360 AC22423 1% 18% - - -
4 Sheet 5.236 MT 1400008 M04
7.500X1405X1900 99
AC21423M1 AC21423M11 Rej. Scrap HR 2623 6.8520 AC21423 1% 18% - - -
1 Sheet 6.852 MT 1400008 M11
5.000X1500X1900 99
AC21423M1 AC21423M12 Rej. Scrap HR 2623 6.8660 AC21423 1% 18% - - -
2 Sheet 6.866 MT 1400008 M12
5.000X1500X1900 99
AC21423M1 AC21423M19 Rej. Scrap HR 2623 5.8260 AC21423 1% 18% - - -
9 Sheet 5.826 MT 1400008 M19
5.000X1200X1900 99
AC21423M2 AC21423M20 Rej. Scrap HR 2623 5.8140 AC21423 1% 18% - - -
0 Sheet 5.814 MT 1400008 M20
5.000X1200X1900 99
AC21423M2 AC21423M21 Rej. Scrap HR 2623 5.8200 AC21423 1% 18% - - -
1 Sheet 5.82 MT 5.000X1200X1900 1400008 M21
99

CIN L27100MH1907PLC000260
AC21423M2 AC21423M22 Rej. Scrap HR 2623 5.0780 AC21423 1% 18% - - -
2 Sheet 5.078 MT 1400008 M22
5.000X1200X1900 99
AC21423M2 AC21423M29 Rej. Scrap HR 2623 6.0550 AC21423 1% 18% - - -
9 Sheet 6.055 MT 1400008 M29
5.000X1250X1900 99
AC21423M3 AC21423M30 Rej. Scrap HR 2623 5.7700 AC21423 1% 18% - - -
0 Sheet 5.77 MT 5.000X1250X1900 1400008 M30
99
AC22423M0 AC22423M01 Rej. Scrap HR 2623 5.9640 AC22423 1% 18% - - -
1 Sheet 5.964 MT 1400008 M01
7.500X1405X1900 99
AC22423M0 AC22423M02 Rej. Scrap HR 2623 5.9520 AC22423 1% 18% - - -
2 Sheet 5.952 MT 1400008 M02
7.500X1405X1900 99
AC22423M0 AC22423M03 Rej. Scrap HR 2623 6.0020 AC22423 1% 18% - - -
3 Sheet 6.002 MT 1400008 M03
7.500X1405X1900 99
AC15423M0 AC15423M01 Rej. Scrap HR 2623 6.9520 AC15423 1% 18% - - -
1 Sheet 6.952 MT 1400008 M01
5.000X1500X1900 99
AC15423M0 AC15423M02 Rej. Scrap HR 2623 6.9500 AC15423 1% 18% - - -
2 Sheet 6.95 MT 5.000X1500X1900 1400008 M02
99
PS10423T80 PS10423T80 Rej. Scrap HR 2623 5.8350 PS10423 1% 18% - - -
Sheet 5.835 MT 1400008 T80
5.000X1400X1900 99

CIN L27100MH1907PLC000260
SF17423T29 SF17423T29 Rej. Scrap HR 2623 5.7540 SF17423 1% 18% - - -
Sheet 5.754 MT 1400008 T29
5.000X1200X1900 99
SF17423T30 SF17423T30 Rej. Scrap HR 2623 5.7520 SF17423 1% 18% - - -
Sheet 5.752 MT 1400008 T30
5.000X1200X1900 99
SF17423T31 SF17423T31 Rej. Scrap HR 2623 5.7360 SF17423 1% 18% - - -
Sheet 5.736 MT 1400008 T31
5.000X1200X1900 99
PS10423T79 PS10423T79 Rej. Scrap HR 2623 5.8300 PS10423 1% 18% - - -
Sheet 5.83 MT 5.000X1400X1900 1400008 T79
99
AC24423M2 AC24423M22 Rej. Scrap HR 2623 6.1560 AC24423 1% 18% - - -
2 Sheet 6.156 MT 1400008 M22
5.000X1250X1900 99
AC25423M0 AC25423M05 Rej. Scrap HR 2623 5.9900 AC25423 1% 18% - - -
5 Sheet 5.99 MT 5.000X1250X1900 1400008 M05
99
AC25423M0 AC25423M01 Rej. Scrap HR 2623 6.8110 AC25423 1% 18% - - -
1 Sheet 6.811 MT 1400008 M01
5.000X1500X1900 99
AC25423M0 AC25423M02 Rej. Scrap HR 2623 6.8090 AC25423 1% 18% - - -
2 Sheet 6.809 MT 1400008 M02
5.000X1500X1900 99
AC25423M0 AC25423M04 Rej. Scrap HR 2623 6.6950 AC25423 1% 18% - - -
4 Sheet 6.695 MT 1400008 M04
5.000X1500X1900 99

CIN L27100MH1907PLC000260
AC25423M0 AC25423M03 Rej. Scrap HR 2623 6.8060 AC25423 1% 18% - - -
3 Sheet 6.806 MT 1400008 M03
5.000X1500X1900 99
AC24423M2 AC24423M21 Rej. Scrap HR 2623 6.1780 AC24423 1% 18% - - -
1 Sheet 6.178 MT 1400008 M21
5.000X1250X1900 99
AC25423M0 AC25423M06 Rej. Scrap HR 2623 5.9880 AC25423 1% 18% - - -
6 Sheet 5.988 MT 1400008 M06
5.000X1250X1900 99
AC25423M1 AC25423M13 Rej. Scrap HR 2623 6.7080 AC25423 1% 18% - - -
3 Sheet 6.708 MT 1400008 M13
5.000X1500X1900 99
AC25423M1 AC25423M14 Rej. Scrap HR 2623 6.7020 AC25423 1% 18% - - -
4 Sheet 6.702 MT 1400008 M14
5.000X1500X1900 99
AC25423M1 AC25423M15 Rej. Scrap HR 2623 6.7040 AC25423 1% 18% - - -
5 Sheet 6.704 MT 1400008 M15
5.000X1500X1900 99
AC25423M1 AC25423M16 Rej. Scrap HR 2623 6.5060 AC25423 1% 18% - - -
6 Sheet 6.506 MT 1400008 M16
5.000X1500X1900 99
AC21423M1 AC21423M18 Rej. Scrap HR 2623 6.2600 AC21423 1% 18% - - -
8 Sheet 6.26 MT 5.000X1500X1900 1400008 M18
99
AC21423M1 AC21423M16 Rej. Scrap HR 2623 7.0540 AC21423 1% 18% - - -
6 Sheet 7.054 MT 1400008 M16
5.000X1500X1900 99

CIN L27100MH1907PLC000260
AC21423M1 AC21423M15 Rej. Scrap HR 2623 7.0760 AC21423 1% 18% - - -
5 Sheet 7.076 MT 1400008 M15
5.000X1500X1900 99
AC21423M1 AC21423M14 Rej. Scrap HR 2623 6.0740 AC21423 1% 18% - - -
4 Sheet 6.074 MT 1400008 M14
5.000X1500X1900 99
AC21423M1 AC21423M13 Rej. Scrap HR 2623 6.8600 AC21423 1% 18% - - -
3 Sheet 6.86 MT 5.000X1500X1900 1400008 M13
99
AC08423M0 AC08423M01 Rej. Scrap HR 2623 4.8060 AC08423 1% 18% - - -
1 Sheet 4.806 MT 1400008 M01
2.500X1200X1900 99
AC08423M0 AC08423M04 Rej. Scrap HR 2623 4.7320 AC08423 1% 18% - - -
4 Sheet 4.732 MT 1400008 M04
2.500X1200X1900 99
AC25423M1 AC25423M17 Rej. Scrap HR 2623 4.9800 AC25423 1% 18% - - -
7 Sheet 4.98 MT 5.000X1190X1900 1400008 M17
99
AC25423M1 AC25423M18 Rej. Scrap HR 2623 5.0480 AC25423 1% 18% - - -
8 Sheet 5.048 MT 1400008 M18
5.000X1190X1900 99
AC25423M1 AC25423M19 Rej. Scrap HR 2623 5.0540 AC25423 1% 18% - - -
9 Sheet 5.054 MT 1400008 M19
5.000X1190X1900 99
AC25423M2 AC25423M21 Rej. Scrap HR 2623 7.0020 AC25423 1% 18% - - -
1 Sheet 7.002 MT 1400008 M21
5.800X1405X1900 99

CIN L27100MH1907PLC000260
AC25423M2 AC25423M28 Rej. Scrap HR 2623 5.9100 AC25423 1% 18% - - -
8 Sheet 5.91 MT 5.000X1375X1900 1400008 M28
99
AC28423M1 AC28423M13 Rej. Scrap HR 2623 6.8340 AC28423 1% 18% - - -
3 Sheet 6.834 MT 1400008 M13
5.000X1500X1900 99
AC28423M1 AC28423M14 Rej. Scrap HR 2623 6.8160 AC28423 1% 18% - - -
4 Sheet 6.816 MT 1400008 M14
5.000X1500X1900 99
AC28423M1 AC28423M15 Rej. Scrap HR 2623 6.8220 AC28423 1% 18% - - -
5 Sheet 6.822 MT 1400008 M15
5.000X1500X1900 99
AC28423M1 AC28423M16 Rej. Scrap HR 2623 6.4600 AC28423 1% 18% - - -
6 Sheet 6.46 MT 5.000X1500X1900 1400008 M16
99
SF28423T31 SF28423T31 Rej. Scrap HR 2623 4.0850 SF28423 1% 18% - - -
Sheet 4.085 MT 1400008 T31
5.000X1250X1900 99
SF28423T30 SF28423T30 Rej. Scrap HR 2623 3.5500 SF28423 1% 18% - - -
Sheet 3.55 MT 5.000X1200X1900 1400008 T30
99
SF28423T28 SF28423T28 Rej. Scrap HR 2623 3.9350 SF28423 1% 18% - - -
Sheet 3.935 MT 1400008 T28
5.000X1200X1900 99
SF28423T27 SF28423T27 Rej. Scrap HR 2623 3.9150 SF28423 1% 18% - - -
Sheet 3.915 MT 1400008 T27
5.000X1200X1900 99

CIN L27100MH1907PLC000260
SF28423T25 SF28423T25 Rej. Scrap HR 2623 3.9100 SF28423 1% 18% - - -
Sheet 3.91 MT 5.000X1200X1900 1400008 T25
99
AC24423M2 AC24423M23 Rej. Scrap HR 2623 6.1520 AC24423 1% 18% - - -
3 Sheet 6.152 MT 1400008 M23
5.000X1250X1900 99
AC24423M2 AC24423M24 Rej. Scrap HR 2623 5.8740 AC24423 1% 18% - - -
4 Sheet 5.874 MT 1400008 M24
5.000X1250X1900 99
SF29423T20 SF29423T20 Rej. Scrap HR 2623 4.0850 SF29423 1% 18% - - -
Sheet 4.085 MT 1400008 T20
5.000X1250X1900 99
SF29423T11 SF29423T11 Rej. Scrap HR 2623 3.9350 SF29423 1% 18% - - -
Sheet 3.935 MT 1400008 T11
5.000X1300X1900 99
SF28423T35 SF28423T35 Rej. Scrap HR 2623 4.0850 SF28423 1% 18% - - -
Sheet 4.085 MT 1400008 T35
5.000X1250X1900 99
SF28423T34 SF28423T34 Rej. Scrap HR 2623 4.0960 SF28423 1% 18% - - -
Sheet 4.096 MT 1400008 T34
5.000X1250X1900 99
SF28423T33 SF28423T33 Rej. Scrap HR 2623 4.0900 SF28423 1% 18% - - -
Sheet 4.09 MT 5.000X1250X1900 1400008 T33
99
AC25423M0 AC25423M07 Rej. Scrap HR 2623 5.9860 AC25423 1% 18% - - -
7 Sheet 5.986 MT 1400008 M07
5.000X1250X1900 99

CIN L27100MH1907PLC000260
 AC25423M0 AC25423M08 Rej. Scrap HR 2623 5.6000 AC25423 1% 18% - - -
8 Sheet 5.6 MT 5.000X1250X1900 1400008 M08
99
AC25423M0 AC25423M09 Rej. Scrap HR 2623 7.2020 AC25423 1% 18% - - -
9 Sheet 7.202 MT 1400008 M09
5.000X1500X1900 99
AC25423M1 AC25423M10 Rej. Scrap HR 2623 7.2060 AC25423 1% 18% - - -
0 Sheet 7.206 MT 1400008 M10
5.000X1500X1900 99
AC25423M1 AC25423M11 Rej. Scrap HR 2623 7.2160 AC25423 1% 18% - - -
1 Sheet 7.216 MT 1400008 M11
5.000X1500X1900 99
AC25423M1 AC25423M12 Rej. Scrap HR 2623 6.4040 AC25423 1% 18% - - -
2 Sheet 6.404 MT 1400008 M12
5.000X1500X1900 99

Quantity mentioned above is indicative.

Intra state Sale: - CGST & SGST: 50% each of GST Rate.
Inter state Sale: - IGST: GST Rate as applicable.

SPECIAL NOTE: - It is the responsibility of the buyer to furnish the valid GST no. & necessary documents to Mjunction before participating in the auction. In case during the
transactions, it is found that valid GST no. has not been provided, then all necessary liabilities if any & so accrued would be on account of the buyer. TATA Steel & Mjunction
would not be responsible for any such liabilities.

TSL reserves the right to track IP address, MAC number and geolocation of bidding customers whenever customers participate in any auction on the mjunction
auction platform for TATA Steel.. Further, Customers are requested to install the necessary apps in the devices we use for log in and bidding in mjunction

CIN L27100MH1907PLC000260
auction platform to enable tracking of the MAC number and geolocation.

B: Payment and Lifting Schedule:

Lot No. PAYMENT SCHEDULE LIFTING SCHEDULE

Full Payment Lifting Days
(No. of working days from the next date of Lot (No. of working days from the next date of Delivery
Confirmation) Order)
All the lots given in the material list 02 Working Days 02 Working Days

1. Requirements of participation:
1.1 Registration: Before participation in the e-Auction, a prospective bidder shall be required to get registered with mjunction services limited. For details visit
https://www.metaljunction.com

1.2 Security Deposit: Non-Interest bearing security deposit of Rs. 60000 (Rupees Sixty Thousand only) through Online Payment only: Details as under:

Beneficiary Name MJUNCTION SERVICES LIMITED

Bank Name HDFC BANK LTD

Branch Name Sandoz Branch, Mumbai

Account No Explained below *

IFSC Code HDFC0000240

Account No:

CIN L27100MH1907PLC000260
 All the customers will have a unique account number. The unique account number is an alpha numeric code consisting of 13 characters. The Customer’s unique
“account number” is a combination of the MJ’ SAP code along with the 7 digit bidder SAP ID and can be used as reference for all subsequent transactions. The
Customer’s Account Number detail is available in “Profile” after the customer logs into our website using the user id and password.

Attention To All Buyers Participating in TSL-IBMD Auctions

TSL SAP code has been made mandatory for participation in TATA IBMD auctions.
Please check your corresponding TSL SAP Code in your profile page. To find the Training Manuals for help, Please go to the tab
Training after Login. If you are unable to locate your TSL SAP Code please contact 033-66106150 ; 8336925968 and 033-66106178 ;
9163348196 for submission of the documents.

“ buyers needs to be careful and serious enough while bidding against any lot, and any bid received by our auction system from the
buyer’s registered ID will be considered as final bid from that buyer.”

2. Inspection registration & policy :

2.1 All parties to send their request for registration of inspection through e-mail to Soumya Sikhar ([email protected]), one day prior to the date of
inspection.
(Mail request should contain – Person Name, Firm Name, Mobile No. & Name of the Auction)

2.2 Customers are advised to ensure that they inspect the materials on offer on the scheduled date as mentioned in the catalogue, before participating in the
auction.
It is retreated that all materials are offer / sold by Tata Steel on“AS-IS-WHERE-IS” and “NO-COMPLAINTS” basis, and no complaint what so ever shall be
entertained
regarding the quality of materials after the sale.
“TATA Steel would not accept any claim from any customer for non-inspection of materials.”
(All are required to bring safety Goggles, Safety Helmet & Safety Shoes. Without the safety equipment’s no one will be allowed to inspect the material inside the
works)
Only registered customers / bidders / representatives of firms shall be allowed for inspection of materials, subject to their fulfilling the safety requirement of the

CIN L27100MH1907PLC000260
 steel works.
Note: Taking photographs of the material is strictly prohibited.
“Material Specification & Photographs if any given in the catalogue is indicative only.”

3. Bidding modalities:
3.1 Price Bid Basis: In Indian rupees as per unit of measurement as given in Material List.
3.2 Bid Increment : Rs.100/- ( Rupees Hundered only)
3.3 Type of Auction: Eng No Ties
3.4 Bid Validity: Bid shall be valid for six working days from the date of auction.
3.5 Bid Duration : NA

4. Taxes & duties:

4.1 : TCS As applicable
With effect from 1st April 2021, TCS on sales will be as follows:- TCS on Scraps @ 1% TCS on other goods @ 0.1%
In view of above, to facilitate the dispatches buyer are requested to pay the excess amount for the balance quantity or confirm the adjustment in quantity within
the deposited amount

4.2 Payments: EMD & Installment payments shall be accepted only by RTGS/NEFT.
For details please contact 033-44091801
4.3 EMD: Not Applicable
4.4 Delayed Payment Charges (DPC) : Installment payments with DPC @ five (05) paise per Rs. 100 per day will be accepted up to One (01) working days from
due date of installment payment as mentioned in the confirmation letter. This is not applicable for EMD payment. GST @ 18% would be charged in addition to
the above DPC amount.
4.5 Only Sundays are excluded for counting purpose for payment schedule
4.6 In the event of Non-Receipt of Payment within the stipulated period of Payment, the Sale Offer for the approved Lot shall stand withdrawn automatically.
4.7 Buyers have to send the payment deposit slip (UTR No /Scan Copy of NEFT/RTGS Transaction Slip) against Lot No. immediately after the payment to
mjunction services limited. Email id: [email protected]
4.8 Tin of TSL : 20251001839

CIN L27100MH1907PLC000260
 4.9 Second and Fourth Saturday of month is excluded for counting purpose of payment schedule as per notification of RBI.

Attn: Customers depositing TDS u/s 194Q while making the payment to Tata Steel Limited.
Sub: Refund on account of TDS u/s 194Q

In order to claim the refund of the TDS deposited u/s 194Q while making the payment to Tata Steel Limited, you are advised to send the necessary details as per the below
format to our O2C Collection Team (Mail ID - [email protected]) along with TDS Certificate*.

Customer Code Customer Name PAN Number (**) TDS Amount (as per Period of TDS
TDS Certificate u/s (Quarter)**
194Q) **

*TDS Certificate must include

• Duly downloaded from Income Tax site mentioning Period (Qtr), TAN No of Deductor (Customer), Name of Deductor (Customer), Amount of Transaction & TDS
• Duly digitally signed by authorized person
• Nature of Payment -194Q
• Deductee- TATA STEEL LIMITED

** PAN No , TDS Amt (194Q) , Period are available at TDS Certificate itself.

Category Scrap:-
1. This transaction falls u/s 206C(1). Hence Section 194Q will not be applicable.

CIN L27100MH1907PLC000260
 2. Compliance in relation to section 206AB (Furnishing of I.T Return for past 2 Years) will be taken directly from Income Tax Portal till 28th June-2021. If any
compliance made in IT Portal by the customer after 28th June-21, then it shall be communicated to Metal Junction over mail. In case of non-compliance as per
section 206AB of Income Tax Act 1961, higher rate of TCS @ 5% will be charged during invoicing.

3. W.e.f 1st of July 2021, invoicing will be done as per new Income Tax provisions.

4. Form 27C & Form 27G shall become inoperative & higher rate of TCS shall be charged, if the customer defaults u/s 206AB of Income Tax Act 1961.

Category Non - Scrap:-

1. This transaction falls u/s 194O. Hence Section 194Q & section 206(1H) shall not be applicable.

2. This transaction falls u/s 194Q/206(1H) depending upon the customer`s previous year turnover

3. Customer has to ensure deduction of TDS u/s 194Q at their end (if applicable). TSL shall not be responsible for any non compliance at customer end.

4. To avoid administrative difficulties, the buyer is required to pay full amount against the purchase; and the amount for TDS u/s 194Q shall be paid separately to
the Government. The TDS shall be treated as security deposit with Tata Steel Limited and on submission of TDS certificate the same can be refunded/adjusted
against future purchases. Illustration showing TDS amount payable.

Refer the below example for TDS computation assuming the sales has crossed the minimum threshold limit

Example:-
5. In case the buyer has not submitted the declaration w.r.t turnover prior to the date of auction, then TSL will assume the turnover to be <10 Cr & TCS @ 0.1% will
be collected accordingly during invoicing

6. Compliance in relation to section 206AB (Furnishing of I.T Return for past 2 Years) will be taken directly from Income Tax Portal till 28th June-2021. If any
compliance made in IT Portal by the customer after 28th June-21, then it shall be communicated to Metal Junction over mail. In case of non-compliance as per
section 206AB of Income Tax Act 1961, higher rate of TCS @ 5% will be charged during invoicing.

7. W.e.f 1st of July 2021, invoicing will be done as per new Income Tax provisions.

IMPLEMENTATION OF TAX COLLECTED AT SOURCE (TCS) ON SALE OF GOODS WITH EFFECT FROM October 1, 2020

Finance Act 2020 introduced a new Section 206C (1H) for extending the scope of Tax Collected at Source (TCS) on sale of any Goods with effect from 1st of October
2020. Hitherto, TCS was only applicable on sale of certain specific category of goods e.g., Scrap, Coal etc.

CIN L27100MH1907PLC000260
The salient features of section 206C(1H) are briefly enumerated below-
1. With effect from 1st April 2021, TCS on sales will be as follows:-
TCS on Scraps @ 1%
TCS on other goods @ 0.1%
2. In view of above, to facilitate the dispatches buyer are requested to pay the excess amount for the balance quantity or confirm the adjustment in quantity within
the deposited amount.
3. TCS shall be collected on the consideration in excess of Rs. 50 Lakhs in a financial year.
4. TCS shall not be collected under this section, if it is covered by any other provision of TCS/TDS under Income Tax Act. For example – TCS on Coal, Scrap.

In view of above amendment TCS component will be incorporated in all our sales invoices and Debit notes after GST component i.e., TCS will be computed on total
invoice value inclusive of GST. You are requested to process payment of the Sales Invoice inclusive of the TCS component. Such TCS component will appear in 26AS
at the end of the quarter and necessary TCS Certificate as per Income Tax Act will be issued.

Note: In case of Scrap & Coal by product sales also (where the current provision of TCS @1% is applicable), TCS will be incorporated in the sales invoices &
Debit Notes.

Customers are required to submit Form 27C/Form 27G against the month of dispatch/expected dispatches. In the absence of Form 27C, TCS will be charged
at the time of invoicing.

5. Lifting terms & conditions:

5.1 DOs will be have to be handed over to authorized representatives of bidders on receipt of payment.
Lifting date is calculated from the next day of DO Release date.
Note: Sundays are optional for the purpose of arriving at the lifting schedule

5.2 Loading Charges: Rs 100 Per MT

CIN L27100MH1907PLC000260
 5.3 Loading Time: 8 AM to 5 PM
Loading shall be given strictly as per the statutory norms & safety norms of Tata Steel Ltd.

5.4 Lifting with Ground Rent: Lifting along with ground rent will be allowed up to Two (02) working days from the last date of lifting period. Ground Rent will be
calculated on balance unlifted quantity @ 05 paise per Rs 100 per day. GST @ 18% would be charged in addition to the above Ground rent amount.

5.5 DO validity can be extended Only ONCE against each Delivery Order upto a maximum of 2 days from last date of original validity period of the DO , subject to
receipt of GR Payment through Online payment by 01.00 PM on the first working day after the expiry of the Original validity period of DO. Kindly note that all
Delivery Orders (DO) which meet the Lot Closure Norms shall be automatically closed within one day from the date of expiry of original Delivery Order (DO)
validity.

5.6 Additional lifting days for advance payment of installment - If the installment payment is made in advance, then additional lifting days (equivalent to the number
of days payment made in advance) would be given. This would not be applicable for EMD payment

5.7 Suitable extension of due date for payment and lifting will be accorded in case of any eventualities like Strike/ Bundh / Special restriction on vehicular movement
imposed by the local Admin. etc."

5.8 Weighment : Weight recorded by Tata Steel weighbridge/TSL Bundle Sticker will be considered final and binding on the customer.

5.9 No Punjab Dala Vehicles allowed at IBMD dispatch Locations/CA's from 1st Nov. 2022.

6. Penalty:
6.1 The following penalties shall be applicable in the eventuality of a buyer defaulting in making the payment of EMD (wherever applicable) or first (Single)-
installment, as per the stipulated schedule for each lot, in a financial year:-
In the first instance, a penalty of Rs. 60,000/- (Rupees Sixty Thousand only) shall be recovered from the customer. The above penalty amount
would be inclusive of GST amount @ 18%.

CIN L27100MH1907PLC000260
 In the second instance, a penalty of Rs. 120,000/- (Rupees One Lakh and twenty thousand only) shall be recovered from the customer. The
above penalty amount would be inclusive of GST amount @ 18%.
In the third, and any subsequent instance, a penalty of Rs. 180,000/- (Rupees One Lakh and Eighty Thousand only) shall be recovered and
the customer shall be debarred from participating in any auction for a period of three months from the date of debarment. The above penalty
amount would be inclusive of GST amount @ 18%.

In the event of any of the above-mentioned default, the customer’s user id will be disabled and the customer will be blocked from participating in any auction of TSL with
immediate effect.

Post default, customer shall be allowed 06 (Six) working days to deposit the penalty as mentioned above. In case the penalty is not received within the stipulated period, the
customer’s security deposit shall be forfeited and above-mentioned debarment from participating in any auction of TSL would continue.

6.2 If, after making payment of EMD (wherever applicable), the installment payment/s are not made by the customer as per the stipulated schedule for each lot, the
entire EMD amount against such lot shall be forfeited.
6.3 In case of non- lifting of full lot quantity after making full payment, a penalty equivalent to 20% of the basic material value for the unlifted confirmed quantity
against each lot shall be recovered from the customer. GST @ 18% would be charged in addition to the above penalty amount.

7. Lot Closure Norms :

For Lot Closure, the tolerance would be ±1, at Sellers Option

“In case of less/non-generation or non-availability of material, up till DO/Contract Validity Date, lots/DO’s may be closed w/o penalty at the discretion of TSL”. In such cases,
any penalty imposed for deviations in payment/non-lifting may be waived off at the discretion of TSL limited”.

8. Refund :
8.1 “TATA Steel would make refunds only through online mode wef 15th June 2016. All customers are required to submit necessary details to Mjunction by 15th
June.”
8.2 Refunds will only be made by TATA Steel vide RTGS/NEFT and hence all customers are required to submit their bank details to mjunction or mail at
[email protected]. TATA Steel or mjunction will not be responsible for any delay in refunds owing to absence of bank details of the customer.

CIN L27100MH1907PLC000260
9. Complaints :
Complaints, if any, with regard to any transaction, shall have to be lodge by the buyers within three Months from the date of last invoice. No complaint shall be
entertained thereafter, under any circumstances. Customers can log their complaints at [email protected] or can log in CCHP (Turant Upaay).
CCHP Log in Manual: https://www.metaljunction.com/appuploads/file/metaljunction/Bidder_Manual_CCHP.PDF

10. Jurisdiction :
Any dispute arising out of any contract shall be decided in Jamshedpur by the courts in Jamshedpur and by no other courts. The courts in Jamshedpur shall have
exclusive jurisdiction to adjudicate upon any such dispute.

11. General terms & conditions:

11.1 Any dispute on quality of material and bid cancellation shall not be entertained at any point after the auction.
11.2 Materials shall be sold on “as is where is basis” and “no complain basis” for all lots.
11.3 Lot transfer will not be allowed. Payment and invoicing has to done in the name of the H1 bidder, subject to the prices being approved.
11.4 Material purchased should be the only material being lifted from the designated location. Tata Steel has the right to check any vehicle at any moment of time.
If material lifted differs from the material that is purchased by the buyer, and then the buyer/authorised representative will be permanently debarred. Also Tata
Steel can take any penal action against the buyer/authorised representative. All the material loaded in the vehicle is to be covered in order to follow the safety
compliance of Tata Steel works. If the safety compliance is not followed then Tata Steel can penalize the buyer/authorised representative as deemed fit. GST @
18% would be charged in addition to the above penalty amount.
11.5 Customer attested photocopy of valid photo ID proof (Voter ID/PAN/Aadhar Card) of all lifters/authorised persons engaged by customers for lifting
of scrap from TSL is to be enclosed with the authorisation letters to be forwarded to TSL (Security/MRSPP) for issue of Gate Pass
11.6 Despatch is subject to Force Majeure Conditions.
11.7 The Seller reserves the right to terminate this offer without assigning any reason.
11.8 In the event of termination of the offer, Seller shall refund the balance amount after due reconciliation.
11.9 Material is being sold on "As Is Where Is" & No Complaint basis.
11.10 No claims whatsoever would be entertained after cancellation of the bid.
11.11 USE OF HYDRA CRANES BY CUSTOMERS IN ANY PREMISES/LOCATION /STOCKYARDS OF TATA STEEL AND ITS VENDORS/CONSIGNMENT
AGENTS' PREMISES IS BANNED.

CIN L27100MH1907PLC000260
 11.12 In addition to earlier safety norms , the following would be compulsory w.e.f 15th June '2014 :
The drivers of the vehicle must have the eye test certificate. The frequency of the testing would be as below :
1. If the age of the person is less than 45 years - Once in a year
2. If the age of the person is 45 years or more , the testing is required to be done once in every 6 months
Please ensure to comply with the safety norms
11.13 Wearing proper PPE at all times when inside the plant
11.14 NO driver to be roaming around during loading of vehicles
11.15 Scotch blocks mandatory when under loading or when at halt
11.16 Drivers to be only at designated areas during loading.
11.17 All vehicles to follow ONLY designated route inside the plant as per instruction given at JMD gate
11.18 Vehicles to be parked only at designated areas. All lifters to discuss the same with plant Operations under any confusion
11.19 No speed violation is acceptable under any circumstances

CIN L27100MH1907PLC000260
a) Buzzer with Turning Indicator :- 1st June
b) SUPD & RUPD :- With Immediate effect

Sl No. Safety Parameters to be chceked

Thre Piece Mirror( Truck, Trailer & Dumper)-Helper side

CIN L27100MH1907PLC000260
 Single Mirror- Driver side
Rear View Mirror (Tata Ace, 207, Jeep etc.)
Service Brake
Parking Brake
Seat Belt
Head Light
Parking Light
Blinker
Horn
Reverse Alarm
Wiper
Windshield Glass
Air Pressure Min. 7 Kg/Cm^2
Run Under Protection Guard as per TSL standard
Side under Protection Guard as per TSL standard
Tyre Condition ( Tread Depth, Cut Mark etc.)
Any Oil Leakage from the vehicle
Physical condition of Dallah
Availability of scotch block
Buzzer with side indicator
Driver's eye examination report
Legal Documents to be checked:
Sl No. Documents to be Checked
RC Book
Insurance

CIN L27100MH1907PLC000260
 Pollution
Driving licence
Fitness for more than 15 years old vehicle
NOC for outside vehicles

The terms & conditions not covered above will be as per Tata Steel’s Secondary General Terms and Conditions.
Revised Standard Terms & Conditions For Tata Steel Secondary Products Auction w.e.f. 1-April-05

Vehicles Entry Rule In view of Covid -19

1. At the testing centre, travel history of driver and customer representative with valid gate pass is to be submitted for testing slip to be issued. Without
proper declaration of travel, testing slip would not be issued which is a mandatory document for entry inside works
2. It is mandatory to have Aarogya Setu Application installed in the mobile or IVRS verified in case personnel does not have smartphone, and would be
duly checked at the testing centre
3. Customer representative with valid gate pass and driver should have the adequate PPEs including Face Mask and gloves for entry inside works.
Removal of face mask or spitting inside works is strictly prohibited
4. All personnel are required to get the thermal scanning done at the Testing centre to proceed inside works. If anything abnormal is indicated, the
personnel would be directed to the nearest medical facility for further tests
5. Social distancing is to be followed as per the issued government guidelines and must be ensured at all places, including inside works and Transport
Park Area.
6. All the catalogues would be uploaded along with the videos and photographs of the lots and should be referred to understand the quality of the lots.
Any request for physical inspection for the material would not be entertained
7. No visitor gate pass would be issued to any personnel for entry inside works until further notice

In addition to above clauses, for customers visiting SPC/EPA facility regarding inspection of material - Proper PPEs including face mask and gloves
are mandatory for customers during inspection of material at the EPA Facility. EPAs would not allow the entry of personnel in case the above

CIN L27100MH1907PLC000260
 conditions are not met
8. Covid Vaccination certificate: W.e.f 9th September’2021, all buyers would be required to attach the copies of Covid Vaccination certificate of the
authorized representatives while sending the authorization letter for lifting of materials. Please also be noted that this is required compulsorily for
issuance of Gate pass for the authorized representatives

Declaration to be submitted for all the authorized representative as per the format

In view of Covid 19, it is compulsory to attach the below details as per format for each of authorized representatives along with the lifting authorization
letter for each lot/Delivery order. In case the same is not provided along with the authorization letter duly signed by the organization on their letter
head, the authorization letter will be considered as incomplete and will not considered for further course of action wrt dispatch of material.

1 2 3 4 5 6 7 8 9
Sl. No. Authorized Aadhar No Mobile No. DO No. Aarogya Setu Last One Contact with Experiencing
Lifter Name Verified month travel a Covid any symptoms
(App/IVRS) history patient (Y/N) like fever, dry
(Y/N) cough,
muscular pain,
breathlessnes
s (Y/N)

Form No.27C
[See Rule 37C]

Declaration under subsection (1A) of section 206C of the Income-tax Act, 1961 to be made by a buyer for obtaining goods without collection of tax

PART II
(For use by the person to whom the declaration is furnished)

CIN L27100MH1907PLC000260
 1. Name of the Seller - Tata Steel Limited 2. PAN of the Seller - AAACT2803M

3. Complete Address - 43, Jawaharlal Nehru Rd, Kankaria Estates, Park Street area, 4. TAN of the Seller - CALT02940A
Kolkata, West Bengal 700071
REGD. OFFICE - BOMBAY HOUSE,24 HOMI MODY STREET,FORT,MUMBAI -
400001
5. Email - [email protected] 6. Telephone No. (with STD Code) and 7. ***Status (Choose among 1 to 6) -
Mobile No. 08017055578 Company

8. Date on which declaration is furnished(dd/mm/yyyy)

9. Date of debiting of the amount payable by the buyer to the account of the buyer or receipt of the amount payable from the buyer in
cash or by issue of a cheque or draft or by any other mode (dd/mm/yyyy)

Forwarded to the Chief Commissioner or Commissioner of Income-Tax

Place: Kolkata Signature of the person responsible for collecting tax at the time of the sale of the goods
Date: referred in Part I.

Notes:
The declaration should be furnished in duplicate.
*Delete whichever is not applicable.
**Indicate the capacity in which the declaration is furnished on behalf of a HUF, AOP, firm, company, etc.
***1=Company; 2=Firm; 3=AOP/BOI; 4=HUF; 5=Individual; 6=Others
Before signing the verification, the declarant should satisfy himself that the information furnished in the declaration is true, correct and complete in all

CIN L27100MH1907PLC000260
 respects.

Any person making a false statement in the declaration shall be liable to prosecution under 277 of the Income-tax Act, 1961 and on conviction be
punishable-
I. In a case where tax sought to be evaded exceeds twentyfive lakh rupees, with rigorous imprisonment which shall not be less than 6 months but
which may extend to seven years and with fine
II. In any other case, with rigorous imprisonment which shall not be less than 3 months but which may extend to two years and with fine

Photographs of lots are at best indicative only and do not necessarily reflect the actual condition of lots .all bidders are advised to physically inspect the
offered lots before participating in the auctions .Tata steel or Mj shall not be responsible or liable for any error of Judgment or bids put by bidders acting on the
basis of these photographs.”
ALL THE PHOTOGRAPHS ARE INDICATIVE

CIN L27100MH1907PLC000260
Sample-1 Sample-2

Sample-3 Sample-4

CIN L27100MH1907PLC000260
Sample-5 Sample-6

Sapmle-7 Sample-8

CIN L27100MH1907PLC000260