Scribd Logo
Upload

Welcome to Scribd!

  • 446 views

    Ultramid A205f

    Uploaded by

    SATHISH KUMAR S
    TECHNYL A 205F NC is an unreinforced polyamide 66 material suitable for injection molding. It offers excellent filling qualities and achieves a UL 94 V2 flammability rating under 0.4mm thickness. The material is well-suited for molding long, thin-walled parts and has applications in connectors, consumer goods, electronics, and more. Key properties include a melting point of 263°C, tensile modulus of 3200MPa, and flame retardancy up to 3mm thickness. The technical data sheet provides processing and mechanical property data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ultramid A205f

    Uploaded by

    SATHISH KUMAR S
    446 views3 pages
    TECHNYL A 205F NC is an unreinforced polyamide 66 material suitable for injection molding. It offers excellent filling qualities and achieves a UL 94 V2 flammability rating under 0.4mm thickness. The material is well-suited for molding long, thin-walled parts and has applications in connectors, consumer goods, electronics, and more. Key properties include a melting point of 263°C, tensile modulus of 3200MPa, and flame retardancy up to 3mm thickness. The technical data sheet provides processing and mechanical property data.

    Original Title

    ULTRAMID A205F

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    TECHNYL A 205F NC is an unreinforced polyamide 66 material suitable for injection molding. It offers excellent filling qualities and achieves a UL 94 V2 flammability rating under 0.4mm thickness. The material is well-suited for molding long, thin-walled parts and has applications in connectors, consumer goods, electronics, and more. Key properties include a melting point of 263°C, tensile modulus of 3200MPa, and flame retardancy up to 3mm thickness. The technical data sheet provides processing and mechanical property data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    446 views3 pages

    Ultramid A205f

    Uploaded by

    SATHISH KUMAR S
    TECHNYL A 205F NC is an unreinforced polyamide 66 material suitable for injection molding. It offers excellent filling qualities and achieves a UL 94 V2 flammability rating under 0.4mm thickness. The material is well-suited for molding long, thin-walled parts and has applications in connectors, consumer goods, electronics, and more. Key properties include a melting point of 263°C, tensile modulus of 3200MPa, and flame retardancy up to 3mm thickness. The technical data sheet provides processing and mechanical property data.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    caring is our formula

    TECHNICAL DATA SHEET

    TECHNYL A 205F NC

    TECHNYL A 205F NC is an unreinforced polyamide 66 for injection moulding. This grade offers two main advantages: excellent filling
    qualities and UL 94 V2 under 0.4 mm. It is particularly suitable for the moulding of long parts with thin wall sections

    General
    Feature Fast molding cycle

    Polymer type PA66 (Polyamide 66)

    Processing technology Injection molding

    Certification RoHS UL-Yellow Card


    EC 1907/2006 (REACH) European Railways Certifications EN 45545-2

    Applications Connectors Consumer Applications


    Electrical/Electronic Applications Fasteners
    home & office furniture Industrial Applications

    Colors available Black Natural


    Grey White

    Forms Pellets

    Product identification
    ISO 1043 abbreviation PA66

    Condition Standard Unit Value


    Physical properties
    Density ISO 1183 g/cm³ 1.14

    Water absorption 24 hr, 23°C ISO 62 % 1.3

    Molding shrinkage, parallel 72 hr, 23°C, 50% RH ISO 294-4, 2577 % 1.7

    Molding shrinkage, normal 72 hr, 23°C, 50% RH ISO 294-4, 2577 % 1.7

    DOMO Engineering Plastics | Technical Service


    [email protected] | www.domochemicals.com
    Date of issue: 08/2022
    Page 1
    caring is our formula

    TECHNICAL DATA SHEET TECHNYL A 205F NC

    Condition Standard Unit Value


    Mechanical properties dam / cond.*
    Tensile modulus 1 mm/min ISO 527-1/-2 MPa 3200 / 1400

    Stress at break ISO 527-1/-2 MPa 60 / 40

    Strain at break ISO 527-1/-2 % 50 / 250

    Flexural modulus, ISO 178 2 mm/min ISO 178 MPa 3000 / 1300

    Flexural modulus, ASTM D790 2 mm/min ASTM D790 MPa 3350 / -

    Flexural strength, ISO 178 2 mm/min ISO 178 MPa 120 / 50

    Flexural strength, ASTM D790 2 mm/min ASTM D790 MPa 125 / -

    Charpy notched impact strength, +23°C +23°C ISO 179/1eA kJ/m² 5 / 10

    Izod notched impact strength, +23°C +23°C ISO 180/1A kJ/m² 5/8

    Thermal properties
    Melting temperature, 10°C/min ISO 11357-1 °C 263

    Temp. of deflection under load, 0.45 MPa 0.45 MPa ISO 75 °C 205

    Temp. of deflection under load, 1.80 MPa 1.80 MPa ISO 75 °C 65

    Electrical properties
    Volume resistivity IEC 62631-3-1 ohm.m 1E+013

    Surface resistivity IEC 62631-3-1 ohm 5E+015

    Dielectric strength 1 mm IEC 60243-1 kV/mm 22

    Burning behaviour

    UL Yellow Card availability Click here to have access to the UL Yellow Card → QMFZ2.E44716

    Flammability, 0.40 mm 0.40 mm UL 94 V2

    Flammability, 0.75 mm 0.75 mm UL 94 V2

    Flammability, 1.5 mm 1.5 mm UL 94 V2

    Flammability, 3.0 mm 3.0 mm UL 94 V2

    Glow-wire flammability index, GWFI, 1.5 1.5 mm IEC 60695-2-12 °C 800


    mm

    Oxygen index % 28
    *: conditioned according to ISO 1110

    DOMO Engineering Plastics | Technical Service


    [email protected] | www.domochemicals.com
    Date of issue: 08/2022
    Page 2
    caring is our formula

    TECHNICAL DATA SHEET TECHNYL A 205F NC

    Processing conditions
    Drying temperature/time 80 °C

    Suggested max moisture 0.2 %

    Rear temperature 265 - 275 °C

    Middle temperature 270 - 280 °C

    Front temperature 280 - 285 °C

    Recommended mould temperature 60 - 80 °C

    Injection notes
    The material is supplied in airtight bags, ready for use. In case that the virgin material has absorbed moisture, it must be dried with a
    dehumidified air drying equipment, dew point mini -20°C. Recommended time 2-4h

    Injection advice
    For unfilled polyamides, Domo recommends the use of high alloy steel with a low chromium content. For example: X38CrMoV5-1 (EN
    Norm) - 1.2367 /1.2343 (DIN Norm). In the case of high requirements on surface quality a mould temperature of up to 120°C can be
    considered. The processing parameters like processing temperatures are a recommendation and can be adjusted in function of injection
    machine size, part geometry / design

    Disclaimer
    The information provided in this documentation corresponds to our technical knowledge at the date of its publication and do not
    constitute a specification. This information may be subject to revision at our discretion. Domo cannot anticipate all conditions under which
    this information and our products of other manufactures in combination with our products may be used. Domo accepts no responsibility
    for results obtained by the application of this information or for the safety and suitability of our products alone or in combination with
    other products. Users are advised to make their own tests to determine the safety and suitability of each product or product combination
    for their own purposes. Unless otherwise agreed in writing, Domo sells the product without warranties. Buyers and users assume all
    responsibility and liability for loss or damage arising from handling and use of our products, whether used alone or in combination with
    other products. Unless specifically indicated, the grades mentioned are not suitable for applications in the pharmaceutical/medical
    sector.

    DOMO Engineering Plastics | Technical Service


    [email protected] | www.domochemicals.com
    Date of issue: 08/2022
    Page 3

    You might also like