Scribd
Upload
27 views5 pages

Installation Instructions On Pitched Roof Construction by Use of The Trapezoidal Profiled Sheet Montavimas Ant Skardinio Stogo Trapeciniu Laikikliu

Uploaded by

OldGuns BlackPowder

1) The document provides installation instructions for pitched roof construction using trapezoidal profiled sheet metal. 2) Key elements needed include trapezoidal rails, bolts, inlet balls, end clamps, middle clamps, hexagonal bolts, flange bolts, and allen screws. 3) The installation process involves first planning the sheet layout and attaching the sheets to the roof using bolts, then adding aluminum drains, end clamps, and middle clamps to separate the modules before deploying the modules on the roof.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt

Installation Instructions On Pitched Roof Construction by Use of The Trapezoidal Profiled Sheet Montavimas Ant Skardinio Stogo Trapeciniu Laikikliu

Uploaded by

OldGuns BlackPowder
27 views5 pages
1) The document provides installation instructions for pitched roof construction using trapezoidal profiled sheet metal. 2) Key elements needed include trapezoidal rails, bolts, inlet balls, end clamps, middle clamps, hexagonal bolts, flange bolts, and allen screws. 3) The installation process involves first planning the sheet layout and attaching the sheets to the roof using bolts, then adding aluminum drains, end clamps, and middle clamps to separate the modules before deploying the modules on the roof.

Original Title

Installation_instructions_on_pitched_roof_construction_by_use_of_the_trapezoidal_profiled_sheet_Montavimas_ant_skardinio_stogo_trapeciniu_laikikliu

Copyright

© © All Rights Reserved

Available Formats

PDF, TXT or read online from Scribd

Did you find this document useful?

Is this content inappropriate?

1) The document provides installation instructions for pitched roof construction using trapezoidal profiled sheet metal. 2) Key elements needed include trapezoidal rails, bolts, inlet balls, end clamps, middle clamps, hexagonal bolts, flange bolts, and allen screws. 3) The installation process involves first planning the sheet layout and attaching the sheets to the roof using bolts, then adding aluminum drains, end clamps, and middle clamps to separate the modules before deploying the modules on the roof.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
27 views5 pages

Installation Instructions On Pitched Roof Construction by Use of The Trapezoidal Profiled Sheet Montavimas Ant Skardinio Stogo Trapeciniu Laikikliu

Uploaded by

OldGuns BlackPowder
1) The document provides installation instructions for pitched roof construction using trapezoidal profiled sheet metal. 2) Key elements needed include trapezoidal rails, bolts, inlet balls, end clamps, middle clamps, hexagonal bolts, flange bolts, and allen screws. 3) The installation process involves first planning the sheet layout and attaching the sheets to the roof using bolts, then adding aluminum drains, end clamps, and middle clamps to separate the modules before deploying the modules on the roof.

Copyright:

© All Rights Reserved
Download as PDF, TXT or read online from Scribd
Download as pdf or txt
You are on page 1/ 5

Installation instructions on pitched roof construction by use of the trapezoidal profiled sheet

Elements required

1. Trapezoidal rail lift 2. Bi-metal bolt 3. Inlet with ball 4.End clamp
(cat. no.20011) (cat. no.50860) (cat. no.50032) (cat. no.10ZXX/10ZXXR)

5.middle clamp 7.Flange bolt 8. Allen screw


6. Hexagonal bolt
(cat. no.10U24/10U24R) M8 (cat. no.5010K) M8 (cat. no.50816-50830)
M8x20 (cat. no.50820)
A 1

A B

In the first phase, we plan the layout of the trapezoidal profiled sheet.
Then attach it using a 6.0x25 bi-metal (cat. no. 41100) bolt in the way to make the trapezoidal
profiled sheet turned perpendicular to the notch plus to leave at least four support points.
Be sure not to drill the holes as these are self-drilling screws.

2
3
A

4
B To the aluminum drain that is placed on the profiles, fix the metal end clamps (cat. no. 10XX/10ZXXR)
5 using the allen bolt M8** (they need to be screwed into the aluminum drain),
remember to do not screw them too hard as due to the need to change the module.

The blank drains will be occupied by the mid clamp (cat. no.10U24/10U24R),
thanks to them two adjacent modules are separated from each other.

*-"XX" is the clamp height in millimeters (25,30,32,35,40)mm, R is the clamp height in black.
**-Thread length for Allen screw M8 (16,20,25,30)mm.
In the last step, deploy the modules on the structure,
set them properly and then screw the mid clamps and end clams.

You might also like