Standard Parts

Hydraulic Fittings – 37 Degree Flare

1. SCOPE

This standard covers hydraulic 37 degree flared fittings and related components with which they
assemble and conforms to CNH Standard STPL010, 37º Flared Fittings Requirements. These fittings are
intended for general application in hydraulic systems on agricultural and construction equipment
products. Certain fittings are identified as non SAE Standard. This means that the specified shape is not
shown in SAE J514, however individual features such as flares, threads, bores, etc, shall conform to
STPL010/SAE Standards for that feature.

2. APPLICATION

This standard defines fittings acceptable for CNH hydraulic and hydrostatic systems.

3. ACRONYMS/DEFINITIONS

DIN German standards organization

IFI Industrial Fasteners Institute
ISO International Standards Organization
SAE Society of Automotive Engineers

4. RELATED DOCUMENTS

4.1 REFERENCE STANDARDS

STPL010 (87692741)—37º Flared Hydraulic Fittings – Basic Requirements

STPA020 (87026717)—Fastener Finishes and Material Specifications

4.2 REPLACED STANDARDS

Case L-002—37 Degree Flared Tube Fittings

NH FNHA-1-D-009.99—Fitting Index
NH FNHA-1-D-010.00—Hydraulic Fittings 37 Degree Flare

5. CROSS REFERENCE

For cross reference listing of company part numbers, go to CNH Catalogue.

6. REQUIREMENTS

6.1 Part numbers include preassembled lock nut, backup washer and O-Ring as applicable.

6.2 All fittings supplied per this standard must meet the requirement listed in STPL010(87692741)—
37º Flared Hydraulic Fittings – Basic Requirements.

ISSUED BY ECN NO. NAME

AK 16MAR23 35365229 HYD FITTINGS - 37 DEGREE FLARE
APPROVED BY REV. PAGE CNH NUMBERS
AK 16MAR23 DH 1 OF 66 87367188 STPL110
THE INFORMATION HEREON IS THE CONFIDENTIAL AND PROPRIETARY PROPERTY OF CNH INDUSTRIAL N.V. AND/OR
ITS SUBSIDIARIES OR DIVISIONS. ANY USE, EXCEPT THAT FOR WHICH IT MAY BE LOANED, IS PROHIBITED.

UNCONTROLLED COPY When Printed

 Standard Parts
Table of Contents
ADAPTER—Female Straight Thread O-Ring Boss to Male Pipe .......................................................................53
BULKHEAD 45 DEGREE ELBOW—Male 37o Flare to Male 37o Flare Bulkhead................................................41
BULKHEAD 90 DEGREE ELBOW—Male 37o Flare to Male 37o Flare Bulkhead................................................40
BULKHEAD CONNECTOR ..................................................................................................................................44
BULKHEAD TEE—Male 37o Flare to Male 37o Flare Bulkhead on Branch ........................................................43
BULKHEAD TEE—Male 37o Flare to Male 37o Flare Bulkhead on Run .............................................................42
BULKHEAD UNION—Male 37o Flare to Male 37o Flare Bulkhead ......................................................................39
CAP—Female 37o Flare with Hex Body ..............................................................................................................33
CONNECTOR —37 Flare Female Swivel to Male BSPT (ISO 7) .........................................................................66
CONNECTOR —37º Flare Female Swivel/Male BSPP ED Seal (ISO 1179) ........................................................62
CONNECTOR —37º Flare Male /Male BSPP .......................................................................................................63
CONNECTOR —Bulkhead Adj Male 37º Flare Female NPTF .............................................................................63
CONNECTOR —Bulkhead Adj Male 37º Flare Male NPTF ........................................................................... 64, 65
CONNECTOR —Bulkhead Male 37º Flare Male ORB .........................................................................................65
CONNECTOR, BRAZE—37º Flare Female ..........................................................................................................64
CONNECTOR—37 Flare Female Swivel to Male Pipe ........................................................................................54
CONNECTOR—37 Flare Tube Swivel Male to Female .......................................................................................52
CONNECTOR—37 Flare Tube Swivel to Female Pipe........................................................................................49
CONNECTOR—Male 37o Flare to Female Pipe Threads ....................................................................................34
CONNECTOR—Male 37o Flare to Male Pipe Thread ............................................................................................8
CONNECTOR—Male 37o Flare to Straight Thread O-Ring...................................................................................6
CROSS—Male 37o Flare to Male 37o Flare on all Legs.......................................................................................31
ELBOW, 45 Degree—Male 37o Flare to Female 37o Flare Swivel Nut................................................................18
ELBOW, 45 Degree—Male 37o Flare to Male Pipe Threads ...............................................................................20
ELBOW, 45 Degree—Male 37o Flare to Straight Thread O-Ring........................................................................19
ELBOW, 90 Degree—37º Flare Male /Male BSPT ...............................................................................................61
ELBOW, 90 Degree—Male 37o Flare to Female 37o Flare Swivel Nut................................................................13
ELBOW, 90 Degree—Male 37o Flare to Female Pipe Threads ...........................................................................17
ELBOW, 90 Degree—Male 37o Flare to Male 37o Flare.......................................................................................12
ELBOW, 90 Degree—Male 37o Flare to Male Pipe Threads ...............................................................................16
ELBOW, 90 Degree—Male 37o Flare to Straight Thread O-Ring........................................................................14
ELBOW—37º Flare Adjustable Straight Thread 90º Long Elbow ......................................................................55
ELBOW—37º Flare Female Swivel Male NPTF ...................................................................................................58
LOCKNUT, BULKHEAD —Locknut for Bulkhead Fittings (not a standard jam nut).........................................45
LOCKNUT—Straight Thread ...............................................................................................................................46
LONG AND EXTRA LONG 90 DEGREE ELBOW—Male 37o Flare to Male Pipe Threads ..................................21
LONG CONNECTOR—Male 37o Flare to Straight Thread O-Ring......................................................................10
NUT—37o Flare - Style A .....................................................................................................................................37
NUT—37o Flare - Style B (short) .........................................................................................................................38
O-RING—SAE Straight Thread Port O-Ring .......................................................................................................47
PLUG—Male 37o Flare with Hex Head ................................................................................................................32
REDUCER—One Piece 37 Degree Flared Tube .................................................................................................35
SLEEVE—37 Degree Flared ................................................................................................................................48
SWIVEL—37º Flare Female Swivel ORFS Male ..................................................................................................66
SWIVEL—37º Flare Male ORFS Female..............................................................................................................57
SWIVEL—Straight Thread Connector 37º SwivelSAE-ORB ..............................................................................56
TEE—Male 37o Flare to Female 37o Flare Swivel Nut on Branch ......................................................................24
TEE—Male 37o Flare to Female 37o Flare Swivel Nut on the Run .....................................................................23
TEE—Male 37o Flare to Female Pipe Threads on the Branch ...........................................................................30
TEE—Male 37o Flare to Female Pipe Threads on the Run.................................................................................29
TEE—Male 37o Flare to Male 37o Flare on Run and Branch ..............................................................................22
TEE—Male 37o Flare to Male Pipe Threads on the Branch................................................................................28
TEE—Male 37o Flare to Male Pipe Threads on the Run .....................................................................................27
TEE—Male 37o Flare to Straight Thread O-Ring on the Branch ........................................................................26
TEE—Male 37o Flare to Straight Thread O-Ring on the Run .............................................................................25
NAME REV. PAGE CNH NUMBERS
HYD FITTINGS - 37 DEGREE FLARE DH 2 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
TUBE END REDUCER—Male 37o Flare to Female 37o Flare ..............................................................................36
UNION ELBOW—Flare Tube 90 Degree Bent Stem ...........................................................................................50
UNION—37 Flare Braze Tube..............................................................................................................................51
UNION—37º Flare Female Fixed with Female Swivel ........................................................................................59
UNION—37º Flare Female Swive/SAE-ORB .......................................................................................................60
UNION—37º Flare Female Swivel Both Ends .....................................................................................................59
UNION—Male 37o Flare to Male 37o Flare .............................................................................................................4
UNION—Male 37o Flare to Male 37o Flare with Large Hex ...................................................................................5
X-LONG 90 DEGREE ELBOW—Male 37o Flare to Straight Thread O-Ring .......................................................11

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 3 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 1: UNION—Male 37o Flare to Male 37o Flare
SAE 070101

Tube Small End Large End W = Hex L=

Part
Dash Thread Size Thread Size Size Length
Number
Size UN/UNF-2A UN/UNF-2A In. In.
-04 7/16-20 7/16-20 1/2 1.37 128820
-05 1/2 - 20 1/2 - 20 9/16 1.38 86513586
-06 9/16-18 9/16-18 5/8 1.41 128821
-08 3/4-16 3/4-16 13/16 1.62 128822
-10 7/8-14 7/8-14 15/16 1.88 128823
-12 1 1/16-12 1 1/16-12 1 1/8 2.16 144121
12-10 7/8-14 1 1/16 - 12 1 1/8 2.05 86514208
-16 1 5/16-12 1 5/16-12 1 3/8 2.25 9790526
16-12 1 1/16-12 1 5/16-12 1 3/8 2.22 84474997
-20 1 5/8-12 1 5/8-12 1 11/16 2.43 86082

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 4 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 2: UNION—Male 37o Flare to Male 37o Flare with Large Hex
SAE 070119

Tube Thread Thread L = Overall W = Hex

Part
Dash Size UN/UNF- Size UN/UNF- Length, Size,
Number
Size 2A 2A In. In.
-4 7/16 - 20 7/16 - 20 1.38 11/16 86513052
-5 1/2 - 20 1/2 - 20 1.38 3/4 86513053
-6 9/16 - 18 9/16 - 18 1.41 13/16 86513054
-8 3/4 - 16 3/4 - 16 1.62 1 86513055
8-6 3/4 - 16 9/16 - 18 1 86624139
-10 7/8 - 14 7/8 - 14 1.88 1 - 1/8 86511517
10-8 7/8 - 14 3/4 - 16 1.80 1 - 1/8 84158896
-12 1 1/16 - 12 1 1/16 - 12 2.16 1 - 3/8 86513056
-16 1 5/16 - 12 1 5/16 - 12 2.25 1 - 5/8 86513057

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 5 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 3: CONNECTOR—Male 37o Flare to Straight Thread O-Ring
SAE 070120

Inch Hex Fittings

* O-Ring to be supplied with fittings. O-Ring part numbers provided for Service Parts purposes only.
Tube Flare End O-Ring End W = Hex L= LI = Fitting O-Ring
Dash Thread Size Thread Size Size, Length Installed Part Part
Size UN/UNF-2A UN/UNF-2A In. In. Length, In. Number Number*
-4 7/16 - 20 7/16 - 20 9/16 1.23 0.87 265235 165202
4-6 7/16 - 20 9/16 - 18 11/16 1.28 0.89 139398 9617873
4-8 7/16 - 20 3/4 - 16 7/8 1.39 — 87010110 128825
-5 1/2-20 1/2-20 5/8 1.23 0.87 47765 129270
-6 9/16 - 18 9/16 - 18 11/16 1.30 0.91 76350 9617873
6-4 9/16 - 18 7/16 - 20 5/8 1.27 0.91 84384 165202
6-8 9/16 - 18 3/4 - 16 7/8 1.38 0.94 128817 128825
6-10 9/16-18 7/8-14 1 1.50 1.00 525646 167269
6-12 9/16-18 1 1/16 - 12 1 1/4 1.68 1.08 86624009 167266
-8 3/4 - 16 3/4 - 16 7/8 1.48 1.04 81827427 128825
8-4 3/4 - 16 7/16 - 20 13/16 1.41 1.04 9790593 165202
8-6 3/4 - 16 9/16 - 18 13/16 1.44 1.05 86509028 9617873
8-10 3/4 - 16 7/8 - 14 1 1.59 1.09 128819 167269
8-12 3/4 - 16 1 1/16 - 12 1 1/4 1.77 1.18 87329794 167266
-10 7/8 - 14 7/8 - 14 1 1.70 1.20 87301330 167269
10-6 7/8-14 9/16-18 1 1/16 1.71 87529133 9617873
10-8 7/8 - 14 3/4 - 16 15/16 1.64 1.17 86071 128825
10-12 7/8 - 14 1 1/16 - 12 1 1/4 1.86 1.27 86507102 167266
-12 1 1/16 - 12 1 1/16 - 12 1 1/4 1.97 1.38 322896 167266

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 6 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 3: CONNECTOR—Male 37o Flare to Straight Thread O-Ring (Continued)
Tube Flare End O-Ring End W = Hex L= LI = Fitting O-Ring
Dash Thread Size Thread Size Size, Length Installed Part Part
Size UN/UNF-2A UN/UNF-2A In. In. Length, In. Number Number*
12-8 1 1/16 - 12 3/4 - 16 1 1/8 1.94 1.50 577993 128825
12-10 1 1/16 - 12 7/8 - 14 1 1/8 1.88 1.38 144124 167269
12-14 1 1/16 - 12 1 3/16-12 1 3/8 1.95 1.37 86512925 9626929
12-16 1 1/16 - 12 1 5/16 - 12 1 1/2 1.99 1.40 233705 167268
12-20 1 1/16 - 12 1 5/8 - 12 1 7/8 2.08 1.49 84548956 570186
-14 1 3/16 - 12 1 3/16 - 12 1 3/8 1.99 1.40 86272 9626929
-16 1 5/16 - 12 1 5/16 - 12 1 1/2 2.05 1.46 378970 167268
16-10 1 5/16 – 12 7/8 - 14 1 3/8 2.08 1.57 86050292 167269
16-12 1 5/16 - 12 1 1/16 - 12 1 3/8 2.06 1.40 86512926 167266
16-14 1 5/16 - 12 1 3/16 - 12 1 3/8 2.05 1.46 9615397 9626929
16-20 1 5/16 - 12 1 5/8 - 12 1 7/8 2.13 1.54 86504080 570186
-20 1 5/8 - 12 1 5/8 - 12 1 7/8 2.17 1.58 570180 570186
20-16 1 5/8 - 12 1 5/16 - 12 1 7/8 2.35 0.943 87558249 167268
20-24 1 5/8 - 12 1 7/8 - 12 2 1/8 2.24 1.65 84465302 9626930
-32 2 1/2-12 2 1/2-12 2 3/4 2.78 2.19 90387067 9846875

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 7 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 4: CONNECTOR—Male 37o Flare to Male Pipe Thread

SAE 070102

Tube Flare End Pipe End W = Hex L= LI =

Part
Dash Thread Size Thread Size Size, Length, Installed
Number
Size UN/UNF-2A NPTF In. In. Length, In.
-4 7/16 -20 1/8 - 27 1/2 1.22 0.99 86513589
4-4 7/16 - 20 1/4 - 18 9/16 1.42 1.08 261768
4-6 7/16 - 20 1/2 - 14 7/8 1.70 84294329
-5 1/2 – 20 1/8 – 27 9/16 1.22 0.99 86513590
5-4 1/2 – 20 1/4 - 18 9/16 1.42 83933510
5-6 1/2 - 20 3/8 - 18 9/16 1.44 86625046
-6 9/16 - 18 1/4 - 18 5/8 1.43 1.09 9706918
6-2 9/16 - 18 1/8 – 27 5/8 1.24 84158893
6-6 9/16 - 18 3/8 - 18 3/4 1.44 1.09 235534
6-8 9/16 - 18 1/2 - 14 7/8 1.69 1.23 19956
6-12 9/16 - 18 3/4 – 14 1 1/8 1.75 1.27 86977756
-8 3/4 - 16 3/8 - 18 13/16 1.53 1.18 163334
8-4 3/4 - 16 1/4 - 18 13/16 1.53 84158894
8-8 3/4 - 16 1/2 - 14 7/8 1.78 1.32 132341
8-12 3/4 - 16 3/4 – 14 1 1/8 1.85 1.37 22877
-10 7/8 - 14 1/2 - 14 15/16 1.89 1.43 242680
10-6 7/8 - 14 3/8 – 18 15/16 1.625 1.35 242679
10-12 7/8 - 14 3/4 - 14 1 1/8 1.95 1.47 578488

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 8 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 4: CONNECTOR—Male 37o Flare to Male Pipe Thread

(Continued)

Tube Flare End Pipe End W = Hex L= LI =

Part
Dash Thread Size Thread Size Size, Length, Installed
Number
Size UN/UNF-2A NPTF In. In. Length, In.
-12 1 1/16 - 12 3/4 - 14 1 1/8 2.06 1.58 86977779
12-6 1 1/16 - 12 3/8-18 1-1/8 1.89 87742365
12-8 1 1/16 - 12 1/2 - 14 1 1/8 2.06 1.60 86512928
12-16 1 1/16 - 12 1 - 11 1/2 1 3/8 2.25 1.68 216764
12-20 1 1/16 - 12 1 1/4 - 11 1/2 1 11/16 2.36 1.77 90476316
-16 1 5/16 - 12 1 - 11 1/2 1 3/8 2.30 1.73 86512927
16-12 1 5/16 - 12 3/4 - 14 1 3/8 2.11 1.63 9615390
16-20 1 5/16 - 12 1 1/4 - 11 1/2 2 2.42 1.83 86513591
-20 1 5/8 - 12 1 1/4 - 11 1/2 1 11/16 2.45 1.86 86512929
20-16 1 5/8 - 12 1 - 11 1/2 1 11/16 2.38 1.81 86977742
-32 2 1/2 – 12 2 – 11 1/2 2 5/8 3.11 2.50 86513592

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 9 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 5: LONG CONNECTOR—Male 37o Flare to Straight Thread O-Ring
SAE 070122

* O-Ring to be supplied with fittings. O-Ring part numbers provided for Service Parts purposes only.
Tube Flare End O-Ring End W = Hex L= LI = Fitting O-Ring
Dash Thread Size Thread Size Size, Length, Installed Part Part
Size UN/UNF-2A UN/UNF-2A In. In. Length, In. Number Number*
-4 7/16 - 20 7/16 - 20 9/16 2.08 1.72 86513064 165202
-6 9/16 - 18 9/16 - 18 11/16 2.31 1.92 86513065 9617873
-8 3/4 - 16 3/4 - 16 7/8 2.70 2.26 9601710 128825
-10 7/8 - 14 7/8 - 14 1 3.04 2.53 86513066 167269
-12 1-1/16 - 12 1-1/16 - 12 1-1/4 3.61 3.02 86513067 167266
-14 1-3/16 - 12 1-3/16 - 12 1-3/8 3.80 3.15 9636094 9626929
-16 1-5/16 - 12 1-5/16 - 12 1-1/2 3.98 3.39 86513068 167268
-20 1-5/8 – 12 1-5/8 - 12 1-7/8 4.69 4.10 570186
-24 1-7/8 - 12 1-7/8 - 12 2-1/8 5.17 4.58 51408169 9626930

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 10 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 6: X-LONG 90 DEGREE ELBOW—Male 37o Flare to Straight Thread O-Ring
SAE 071620

Fitting part numbers include nut, washer and O-Ring.

O-Ring part numbers provided for Service parts purposes only.
Tube Flare End O-Ring End W = Wrench LF = Flare LR = O- LI = Fitting O-Ring
Dash Thread Size Thread Size Flats Width, Leg Length Ring End Installed Part Part
Size UN/UNF-2A UN/UNF-2A In. In. Length In. Length, In. Number Number*
-6 9/16 - 18 9/16 - 18 9/16 1.06 2.08 1.65 86526 9617873
6-4 9/16 - 18 7/16-20 9/16 1.06 1.73 84289687 165202
-8 3/4 - 16 3/4 - 16 7/8 1.25 2.50 2.01 86513069 128825
-8 3/4 - 16 3/4 - 16 13/16 1.25 1.81 1.32 87012268 128825
-10 7/8 - 14 7/8 - 14 7/8 1.45 2.89 2.33 86499 167269
-12 1 1/16 - 12 1 1/16 - 12 1 1/16 1.66 3.34 2.69 84569 167266

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 11 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 7: ELBOW, 90 Degree—Male 37o Flare to Male 37o Flare

SAE 070201

W=
Tube Flare End Flare End Wrench L = Leg
Flats Part
Dash Thread Size Thread Size Length
Width, In. Number
Size UN/UNF-2A UN/UNF-2A In.
Forging
-4 7/16 - 20 7/16 - 20 7/16 0.89 86512930
-5 1/2 - 20 1/2 - 20 9/16 0.95 86512931
-6 9/16 - 18 9/16 - 18 9/16 1.06 241074
-8 3/4 - 16 3/4 - 16 3/4 1.25 216791
8-10 3/4 - 16 7/8 - 14 7/8 1.33 47606516
-10 7/8 - 14 7/8 - 14 7/8 1.45 86512932
-12 1 1/16 - 12 1 1/16 - 12 1 1/16 1.66 144120
12-8 1 1/16 - 12 3/4 - 16 1 1/16 1.66 90476313
-16 1 5/16 - 12 1 5/16 - 12 1 5/16 1.81 9615392
16-12 1 5/16 - 12 1 1/16 - 12 1 5/16 1.81 87038696
-20 1 5/8 - 12 1 5/8 - 12 1 5/8 2.06 86665

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 12 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 8: ELBOW, 90 Degree—Male 37o Flare to Female 37o Flare Swivel Nut
SAE 070221 (ISO 8434-2 Listed below)

Flare End W = Wrench

Tube Thread Size Swivel End Flats Width, LM = Male Leg LS = Swivel Leg LI = Center to
Part
Dash UN/UNF-2A Thread Size In. Length Length Seat Length,
Number
Size UN/UNF-2A In. In. In.
Forging
-3 3/8 - 24 3/8 - 24 7/16 0.83 1.00 0.67 86513606
-4 7/16 - 20 7/16 - 20 7/16 0.89 1.00 0.66 86512933

-5 1/2 - 20 1/2 - 20 9/16 0.95 1.06 0.78 86513593

-6 9/16 - 18 9/16 - 18 9/16 1.06 1.25 0.88 86629586
6-8 9/16 - 18 3/4 - 16 3/4 1.16 1.38 0.95 91764104
-8 3/4 - 16 3/4 - 16 3/4 1.25 1.38 0.95 248974
8-6 3/4 – 16 9/16 – 18 3/4 1.28 1.31 87668383

8-12 3/4 - 16 1 1/16 - 12 3/4 1.28 1.81 86624011

-10 7/8 - 14 7/8 - 14 7/8 1.45 1.62 1.13 182977

10-8 7/8 - 14 3/4 - 16 7/8 1.45 1.38 91759735

10-12 7/8-14 1-1/16-12 1-1/16 1.54 1.75 87612748

-12 1 1/16 - 12 1 1/16 - 12 1 1/16 1.66 1.75 1.19 219603
12-10 1-1/16-12 7/8-14 1-1/16 1.69 1.68 87557236
-16 1 5/16 - 12 1 5/16 - 12 1 5/16 1.81 2.00 1.41 86050288
16-12 1 5/16-12 1 1/16-12 1 5/16 1.81 1.70 1.14 84209924

-24 1 7/8-12 1 7/8-12 1 7/8 2.33 2.59 1.86 90387060

ISO 8434-2

Flare End W = Wrench LM = Male LS = Swivel Leg LI = Center to

Tube Swivel End Part
Thread Size Flats Width, Leg Length Length Seat Length,
Dash Thread Size Number
UN/UNF-2A In. In. In. In.
Size UN/UNF-2A
Forging
-8 3/4 - 16 3/4 - 16 3/4 32 35.1 24.4 5156776

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 13 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 9: ELBOW, 90 Degree—Male 37o Flare to Straight Thread O-Ring
SAE 070220

Fitting part numbers include nut, washer and O-Ring.

O-Ring part numbers provided for Service parts purposes only.

W=
Wrench
Tube Flare End O-Ring End Flats LF = Flare Leg LR = O-Ring LI = Fitting O-Ring
Dash Thread Size Thread Size Width, Length End Length Installed Part Part
Size UN/UNF-2A UN/UNF-2A In. In. In. Length, In. Number Number*

Forging

-3 3/8 - 24 3/8 - 24 7/16 0.83 0.94 0.61 86977760 86513328

-4 7/16 - 20 7/16 - 20 7/16 0.89 1.03 0.64 216773 165202

4-6 7/16 - 20 9/16 - 18 9/16 1.05 1.25 0.82 86512934 9617873

-5 1/2 - 20 1/2 - 20 9/16 0.95 1.09 0.70 86512935 129270

5-6 1/2 - 20 9/16 - 18 9/16 1.05 1.25 0.82 86637732 9617873

-6 9/16 - 18 9/16 - 18 9/16 1.06 1.25 0.82 76344 9617873

6-4 9/16 - 18 7/16 - 20 9/16 1.06 1.19 0.80 86512936 165202

6-8 9/16 - 18 3/4 - 16 3/4 1.14 1.45 0.96 76347 128825

6-10 9/16 - 18 7/8 - 14 7/8 1.23 1.70 1.24 86512937 167269

-8 3/4 - 16 3/4 - 16 3/4 1.25 1.45 0.96 128830 128825

8-6 3/4 - 16 9/16 - 18 3/4 1.25 1.36 0.89 86512938 9617873

8-10 3/4 - 16 7/8 - 14 7/8 1.34 1.70 1.14 9617891 167269

8-12 3/4 - 16 1 1/16 - 12 1 1/16 1.42 1.94 1.47 87329785 167266

-10 7/8 - 14 7/8 - 14 7/8 1.45 1.70 1.14 164910 167269

10-6 7/8 - 14 9/16 - 18 7/8 1.45 1.41 0.82 86625052 9617873

10-8 7/8 - 14 3/4 - 16 7/8 1.45 1.55 1.06 86527 128825

10-12 7/8 - 14 1 1/16 - 12 1 1/16 1.53 1.94 1.79 84570 167266

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 14 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 9: ELBOW, 90 DEGREE—Male 37o Flare to Straight Thread O-Ring (Continued)

W=
Wrench LF = Flare Leg LR = O-Ring LI = Fitting O-Ring
Tube Flare End O-Ring End Flats Length End Length Installed Part Part
Dash Thread Size Thread Size Width, In. In. Length, In. Number Number*
Size UN/UNF-2A UN/UNF-2A In.

Forging

10-16 7/8-14 1 5/16-12 1 5/16 1.81 2.05 1.40 87024324 167268

-12 1 1/16 - 12 1 1/16 - 12 1 5/16 1.66 1.75 1.40 322894 167266

12-8 1 1/16 - 12 3/4 - 16 1 1/16 1.66 1.63 1.16 100333 128825

12-10 1 1/16 - 12 7/8 - 14 1 1/16 1.66 1.78 1.22 144123 167269

12-14 1 1/16 - 12 1 3/16 - 12 1 5/16 1.70 2.00 1.35 86512945 9626929

12-16 1 1/16 - 12 1 5/16 - 12 1 5/16 1.81 2.05 1.40 87021824 167268

12-20 1 1/16 - 12 1 5/8 - 12 1 5/8 1.96 2.25 84543600 570186

-14 1 3/16 - 12 1 3/16 - 12 1 5/16 1.73 2.00 1.35 86512946 9626929

-16 1 5/16 - 12 1 5/16 - 12 1 5/16 1.81 2.05 1.40 268277 167268

16-12 1 5/16 - 12 1 1/16 - 12 1 5/16 1.81 2.05 1.40 286217 167266

16-20 1 5/16 - 12 1 5/8 - 12 1 5/8 2.01 2.25 1.60 86513541 570186

-20 1 5/8 - 12 1 5/8 - 12 1 5/8 2.06 2.25 1.60 84530 570186

20-16 1 5/8 - 12 1 5/16 - 12 1 5/8 2.06 2.25 — 87010672 167268

-24 1 7/8 - 12 1 7/8 -12 1 7/8 2.33 2.39 1.74 50658 9626930

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 15 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 10: ELBOW, 90 Degree—Male 37o Flare to Male Pipe Threads
SAE 070202

W=
Wrench L F= Flare LP = Pipe LI =
Tube Flare End Part
Pipe Thread Flats Leg Length Leg Length Installed
Dash Thread Size Number
Size NPTF Width, In. In. Length, In.
Size UN/UNF-2A In.
Forging
-3 3/8 - 24 1/8 - 27 7/16 0.81 0.75 0.50 272621
-4 7/16 - 20 1/8 - 27 7/16 0.89 0.78 0.55 86512947
4-4 7/16 - 20 1/4 - 18 9/16 1.05 1.09 0.75 259918
4-6 7/16 - 20 3/8 - 18 3/4 1.13 1.22 0.87 86512948
-5 1/2 - 20 1/8 - 27 9/16 0.95 0.78 0.55 9635957
5-4 1/2 - 20 1/4 - 18 9/16 1.06 1.09 0.75 86512949
-6 9/16 - 18 1/4 - 18 9/16 1.06 1.09 0.75 578384
6-6 9/16 - 18 3/8 - 18 3/4 1.14 1.22 0.87 235131
6-8 9/16 - 18 1/2 - 14 7/8 1.22 1.47 1.01 86512950
6-8 9/16 - 18 1/2 - 14 22mm 1.12 1.45 5179497
-8 3/4 - 16 3/8 - 18 3/4 1.25 1.22 0.87 76351
8-8 3/4 - 16 1/2 - 14 7/8 1.33 1.47 1.01 76352
8-12 3/4 - 16 3/4 - 14 1 1/16 1.42 1.59 1.11 216744
-10 7/8 - 14 1/2 - 14 7/8 1.45 1.47 1.01 128828
10-6 7/8 - 14 3/8 - 18 7/8 1.45 1.28 0.93 243155
10-12 7/8 - 14 3/4 - 14 1 1/16 1.53 1.59 1.11 277165
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.66 1.59 1.11 86977777
12-16 1 1/16 - 12 1 - 11 1/2 1 5/16 1.81 1.97 1.39 86512951
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.81 1.97 1.40 86512952
16-12 1 5/16 - 12 3/4 - 14 1 5/16 1.81 1.72 1.30 9615396
16-20 1 5/16 - 12 1 1/4 - 11 1/2 1 5/8 2.13 2.38 1.78 86512953

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 16 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 11: ELBOW, 90 Degree—Male 37o Flare to Female Pipe Threads
SAE 070203

Tube Flare End Pipe Port W = Wrench LF = Flare LP = Pipe

Part
Dash Thread Size Thread Size Flats Width, Leg Length Leg Length
Number
Size UN/UNF-2A NPTF In. In. In.
-4 7/16 - 20 1/8 - 27 9/16 1.08 0.66 86512954
4-4 7/16 - 20 1/4 - 18 3/4 1.22 0.88 251128
-5 1/2 - 20 1/8 - 27 9/16 1.08 0.66 86512955
-6 9/16 - 18 1/4 - 18 3/4 1.23 0.88 47795
-8 3/4 - 16 3/8 - 18 7/8 1.42 1.02 47796
8-8 3/4 - 16 1/2 - 14 1 1/16 1.52 1.23 86512956
-12 1 1/16 - 12 3/4 - 14 1 5/16 1.89 1.36 86512957
-16 1 5/16 - 12 1 - 11 1/2 1 5/8 2.17 1.63 86508510

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 17 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 12: ELBOW, 45 Degree—Male 37o Flare to Female 37o Flare Swivel Nut
SAE 070321

W=
Wrench
Tube Flare End Flats LF = Male LS = Swivel LI = Center
Part
Dash Thread Size Width, Leg Length Leg Length to Seat
Number
Size UN/UNF-2A In. In. In. Length, In.
Forging
-4 7/16 - 20 7/16 0.72 0.94 0.59 86512958
-5 1/2 - 20 9/16 0.77 1.00 0.63 47817
-6 9/16 - 18 9/16 0.83 1.12 0.75 86512959
-8 3/4 - 16 3/4 0.98 1.28 0.86 248992
-10 7/8 - 14 7/8 1.11 1.44 0.94 86512960
-12 1 1/16 - 12 1 3/16 1.28 1.50 0.94 219605
-16 1 5/16 - 12 1 5/16 1.47 1.75 1.16 86512961
-20 1 5/8 - 12 1 5/8 1.62 2.09 1.43 84543599
-32 2 1/2-12 2 1/2 2.22 2.76 1.97 90387051

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 18 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 13: ELBOW, 45 Degree—Male 37o Flare to Straight Thread O-Ring
SAE 070320

Fitting part numbers include nut, washer and O-Ring.

O-Ring part numbers provided for Service parts purposes only.
W=
Wrench LF = LR = O- LI =
Tube Flare End O-Ring End Fitting O-Ring
Flats Flare Leg Ring End Installed
Dash Thread Size Thread Size Part Part
Width, In. Length Length Length,
Size UN/UNF-2A UN/UNF-2A Number Number*
In. In. In.
Forging

-4 7/16 - 20 7/16 - 20 7/16 0.72 1.05 0.66 86512993 165202

4-6 7/16 - 20 9/16 - 18 9/16 .720 1.14 87029964 9617873
-5 1/2 - 20 1/2 - 20 9/16 0.77 1.05 0.66 86512994 129270
-6 9/16 - 18 9/16 - 18 9/16 0.83 1.14 0.71 330346 9617873
6-4 9/16-18 7/16-20 9/16 0.83 1.13 87593247 165202
6-8 9/16 - 18 3/4 - 16 3/4 0.87 1.30 0.81 84313 128825
-8 3/4 - 16 3/4 - 16 3/4 0.98 1.30 0.81 216797 128825
8-6 3/4 - 16 9/16 - 18 9/16 0.98 1.14 0.71 87301276 9617873
8-10 3/4 - 16 7/8 - 14 7/8 1.00 1.52 0.96 9610689 167269
8-12 3/4 - 16 1 1/16 - 12 1 1/16 0.98 1.73 84289681 167266
-10 7/8 - 14 7/8 - 14 7/8 1.11 1.52 0.96 330345 167269
10-8 7/8 - 14 3/4 - 16 7/8 1.11 1.40 0.91 86512996 128825
10-12 7/8 - 14 1 1/16 - 12 1 1/16 1.16 1.73 1.08 100197 167266
-12 1 1/16 - 12 1 1/16 - 12 1 1/16 1.28 1.73 1.08 330344 167266
12-10 1 1/16 - 12 7/8 - 14 1 1/16 1.28 1.58 1.02 9610706 167269
12-16 1 1/16 - 12 1 5/16 - 12 1 5/16 1.42 1.86 1.20 87657980 167268
-16 1 5/16 - 12 1 5/16 - 12 1 5/16 1.47 1.86 1.21 86977688 167268
16-12 1 5/16 - 12 1 1/16 - 12 1 5/16 1.47 1.81 1.08 51522299 167266
-20 1 5/8 - 12 1 5/8 - 12 1 5/8 1.59 1.91 1.26 86977689 570186
20-16 1 5/8 - 12 1 5/16 - 12 1 5/8 1.59 1.86 1.21 86512997 570186

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 19 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 14: ELBOW, 45 Degree—Male 37o Flare to Male Pipe Threads

SAE 070302

W=
Tube Flare End Pipe Wrench LF = Flare LP = Pipe LI =
Flats Part
Dash Thread Size Thread Size Leg Length Leg Length Installed
Width, In. Number
Size UN/UNF-2A NPTF In. In. Length, In.
Forging
-4 7/16 - 20 1/8 - 27 7/16 0.72 0.64 0.40 86512998
-5 1/2 - 20 1/8 - 27 9/16 0.77 0.64 0.40 86513594
-6 9/16 - 18 1/4 - 18 9/16 0.83 0.86 0.52 9617966
6-6 9/16 - 18 3/8 - 18 3/4 0.87 0.95 0.60 86512999
6-8 9/16 - 18 1/2 - 14 7/8 1.06 1.17 0.71 86513000
-8 3/4 - 16 3/8 - 18 3/4 0.98 0.95 0.60 17387
8-8 3/4 - 16 1/2 - 14 7/8 0.99 1.17 .71 86513001
-10 7/8 - 14 1/2 - 14 7/8 1.11 1.17 0.71 86513002
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.28 1.20 .72 86513003
12-8 1 1/16- 12 1/2 - 14 1 1/16 1.28 1.20 0.72 86513004
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.47 1.48 0.91 16996
16-12 1 5/16 - 12 3/4 - 14 1 5/16 1.47 1.29 0.81 128848
-20 1 5/8 - 12 1 1/4 - 11 1/2 1 5/8 1.59 1.67 1.07 86520453

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 20 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 15: LONG AND EXTRA LONG 90 DEGREE ELBOW—Male 37o Flare to Male Pipe Threads
SAE 071502 and 071602

Tube Flare End Pipe End W = Wrench LF = Flare LP = Pipe LI =

Part
Dash Thread Size Thread Size Flats Width, Leg Length End Length Installed
Number
Size UN/UNF-2A NPTF In. In. In. Length, In.
-4 7/16 - 20 1/8 - 27 7/16 0.89 1.56 * 1.36 86513070
-4 7/16 - 20 1/8 - 27 7/16 0.89 1.17 N/A 87530433
-5 1/2 - 20 1/8 - 27 9/16 0.95 1.21 0.94 86513071
-5 1/2 - 20 1/8 - 27 9/16 0.95 1.63 * 1.40 86513072
-6 9/16 - 18 1/4 - 18 9/16 1.06 1.56 1.22 86513073
-6 9/16 - 18 1/4 - 18 9/16 1.06 2.03 * 1.69 86513533
-8 3/4 - 16 3/8 - 18 3/4 1.25 1.82 1.17 86513074
-8 3/4 - 16 3/8 - 18 3/4 1.25 2.42 * 1.99 86507027
-10 7/8 - 14 1/2 - 14 7/8 1.45 2.17 1.69 86513075
-10 7/8 - 14 1/2 - 14 7/8 1.45 2.87 * 2.38 86513076
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.66 2.44 1.93 86513077
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.66 3.34 * 2.69 86505944
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.81 3.01 2.35 86513078
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.81 4.05 * 3.40 86513079

* These parts are “Extra Long”.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 21 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 16: TEE—Male 37o Flare to Male 37o Flare on Run and Branch
SAE 070401

Large Small End W = Body

End Thread Size Width, In. L = Leg
Tube Branch End
Thread UN/UNF-2A (run,run,branch) Part
Dash Thread Size
Size Forging Length, Number
Size UN/UNF-2A
UN/UNF- Min. In.
2A
-4 7/16-20 7/16-20 7/16-20 7/16 0.89 254050
-5 1/2-20 1/2-20 1/2-20 9/16 0.95 86513005
-6 9/16-18 9/16-18 9/16-18 9/16 1.06 76355
6-6-8 9/16-18 9/16-18 3/4-16 3/4 1.15/1.15/1.25 86624134
-8 3/4-16 3/4-16 3/4-16 3/4 1.25 128996
8-8-10 3/4-16 3/4-16 7/8-14 7/8 1.33/1.33/1.45 87032909
8-10-10 7/8-14 3/4-16 7/8-14 7/8 1.33/1.45/1.45 87605322
-10 7/8-14 7/8-14 7/8-14 7/8 1.45 16985
10-8-8 7/8-14 3/4-16 3/4-16 7/8 1.45/1.31/1.31 9846316
7/8-14 7/8-14 22mm –
10-10-6 9/16-18 Non- 1.43/1.43/1.22 84515564
Standard
10-10-6 7/8-14 7/8-14 9/16-18 27mm 1.43/1.43/1.22 87587347
10-10-8 7/8-14 7/8-14 3/4-16 7/8 1.45/1.45/1.31 87644290
-12 1 1/16-12 1 1/16-12 1 1/16-12 1 1/16 1.66 80015694
12-10-12 1 1/16-12 7/8-14 1 1/16-12 1 1/16 1.66/1.50/1.66 87303737
12-12-8 1 1/16-12 1 1/16-12 3/4-16 1 1/16 1.66/1.66/1.42 266315
12-12-10 1 1/16-12 1 1/16-12 7/8-14 1 1/16 1.66/1.66/1.50
-16 1 5/16-12 1 5/16-12 1 5/16-12 1 5/16 1.81 86513006
16-16-12 1 5/16-12 1 5/16-12 1 1/16-12 1 5/16 1.81/1.81/1.76 86625278
-20 1 5/8-12 1 5/8-12 1 5/8-12 1 5/8 2.06

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 22 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 17: TEE—Male 37o Flare to Female 37o Flare Swivel Nut on the Run
SAE 070432

W=
LM = Male LS = Swivel LI = Center
Wrench Part
Tube Dash Leg Length Leg Length to Seat
Flats Number
Size In. In. Length, In.
Width, In.
Forging
-4 7/16 0.89 1.00 0.66 86513653
-5 9/16 0.95 1.06 0.78 86513595
-6 9/16 1.06 1.25 0.88 129274
-8 3/4 1.25 1.38 0.95 86511870
8-8-6 3/4 1.15 1.38 0.95 87029963
8-12-12 1 1/16 1.66 1.75 1.19 86624129
-10 7/8 1.45 1.62 1.13 86513011
10-8-10 7/8 1.45 1.26 1.13 87622771
10-10-6 7/8 1.22 1.62 1.13 87446825
10-10-8 7/8 1.33 1.62 1.13 86632549
-12 1 1/16 1.66 1.75 1.19 265978
12-12-4 1 1/16 1.66 1.75 1.19 87393630
12-12-8 1 1/16 1.41 1.75 1.19 86632548
12-12-16 1 5/16 1.66 1.70 1.19 84209922
12-16-12 1 5/16 1.66 2.00 1.41 87698812
-16 1 5/16 1.81 2.00 1.41 9618946
16-16-6 1 5/16 1.81 2.00 1.41 84256796
16-16-10 1 5/16 1.64 2.00 1.41 86625274
-20 1 5/8 2.06 2.31 1.69 91759389

Dash sizes are listed in order of Run End Flare, Run End Swivel and Branch End

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 23 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 18: TEE—Male 37o Flare to Female 37o Flare Swivel Nut on Branch
SAE 070433

W=
Wrench
Tube Flare End Flats LM = Male LS = Swivel LI = Center to
Part
Dash Thread Size Width, In. Leg Length Leg Length Seat Length,
Number
Size UN/UNF-2A In. In. In.
Forging
Min.
-4 7/16 - 20 7/16 0.89 1.00 0.66 86513012
4-4-8 7/16-20 3/4 1.12 1.38 0.95 87625623
-5 1/2 - 20 9/16 0.95 1.06 0.68 86513013
-6 9/16 - 18 9/16 1.06 1.25 0.88 86513014
-8 3/4 - 16 3/4 1.25 1.38 0.95 86513015
-10 7/8 - 14 7/8 1.45 1.62 1.13 86513016
-12 1 1/16 - 12 1 1/16 1.66 1.75 1.19 86513017
-16 1 5/16 - 12 1 5/16 1.81 2.00 1.41 86513018
-20 1 5/8 - 12 1 5/8 2.06 2.31 1.69 84524

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 24 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 19: TEE—Male 37o Flare to Straight Thread O-Ring on the Run
SAE 070428 (Dash sizes are listed in order of Run End, Run End Adjustable and Branch End)

Fitting part numbers include nut, washer and O-Ring.

O-Ring part numbers provided for Service parts purposes only.

W=
Wrench
Tube O-Ring End Flats LF = Flare LR = O- LI = Fitting O-Ring
Dash Thread Size Width, In. Leg Length Ring End Installed Part Part
Size UN/UNF-2A In. Length In. Length, In. Number Number*
Forging
Min.
-4 7/16 - 20 7/16 0.89 1.03 0.64 86513019 165202
4-6-6 9/16 – 18 9/16 1.06 1.25 0.82 87029965 9617873
4-10-8 7/8 - 14 0.895 1.21 1.70 — 87010111 167269
-5 1/2 - 20 0.563 0.97 1.13 0.70 86513596 129270
-6 9/16 - 18 9/16 1.06 1.25 0.82 86513020 9617873
6-4-6 7/16-20 9/16 1.06 1.15 0.64 47451735 165202
6-6-8 9/16-18 9/16 1.25 1.25 0.82 47463839 9617873
6-8-6 3/4-16 3/4 1.14 1.45 87564739 128825
6-12-12 1 1/16 - 12 1 1/16 1.66 1.94 — 87019668 167266
-8 3/4 - 16 3/4 1.25 1.45 0.96 265808 128825
8-6-8 9/16 - 18 3/4 1.25 1.25 0.82 86625275 9617873
8-8-6 3/4-16 3/4 1.14 1.45 0.96 84177571 128825
8-10-8 7/8 - 14 7/8 1.25 1.70 1.14 86624130 167269
-10 7/8 - 14 7/8 1.45 1.70 1.14 164918 167269
10-10-6 7/8 - 14 7/8 1.25 1.70 1.14 47468242 167269
10-10-8 7/8 - 14 7/8 1.33 1.70 1.14 47468244 167269
10-12-10 1-1/16-12 1 1/16 1.54 1.94 87597961 167266
-12 1 1/16 - 12 1 1/16 1.66 1.94 1.29 219604 167266
12-10-12 7/8 - 14 1 1/16 1.66 1.78 1.22 86513021 167269
12-12-10 1 1/16 - 12 1 5/16 1.66 1.94 87399014 167266
12-12-8 1 1/16 - 12 1 5/16 1.66 1.94 87398986 167266
12-12-16 1 1/16 - 12 1 5/16 1.76 2.05 — 87010109 167266
12-16-12 1 5/16 - 12 1 5/16 1.76 2.05 1.40 86624131 167268
-16 1 5/16 - 12 1 5/16 1.81 2.05 1.40 86513022 167268
16-12-16 1 1/16 - 12 1 5/16 1.81 2.05 1.40 47509073 167266
16-16-8 1 5/16 - 12 1 5/16 1.81 2.05 1.40 86625277 167268
-24 1 7/8 - 12 1 7/8 2.33 2.39 1.16 86663 9626959

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 25 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 20: TEE—Male 37o Flare to Straight Thread O-Ring on the Branch
SAE 070429

Fitting part numbers include nut, washer and O-Ring.

O-Ring part numbers provided for Service parts purposes only.
W=
Tube Dash Wrench
Size O-Ring End Flats LF = Flare LR = O-Ring LI = Fitting O-Ring
Thread Size Width, In. Leg Length End Length Installed Part Part
UN/UNF-2A In. In. Length, In. Number Number*
Forging
Min.
-4 7/16 - 20 7/16 0.89 1.03 0.64 16989 165202
-5 1/2 - 20 9/16 0.95 1.13 0.70 86513023 129270
-6 9/16 - 18 9/16 1.06 1.25 0.82 163335 9617873
6-4 7/16 - 20 9/16 1.06 1.09 0.70 262004 165202
6-6-8 3/4 - 16 3/4 1.15 1.45 0.96 87331046 128825
-8 3/4 - 16 3/4 1.25 1.45 0.96 86513024 128825
8-6-6 9/16 - 18 3/4 1.14 1.32 0.82 90356105 9617873
8-8-6 9/16 - 18 3/4 1.25 1.25 0.82 86513025 9617873
8-8-10 7/8-14 7/8 1.33 1.70 1.14 47447117 167269
8-16-16 1 5/16-12 1 5/16 1.81 2.05 - 91759720 167268
-10 7/8 - 14 7/8 1.45 1.70 1.14 86513026 167269
10-10-12 1-1/6-12 1-1/16 1.54 1.94 1.29 87632737 167266
-12 1 1/16 - 12 1 1/16 1.66 1.94 1.29 87622774 167266
12-10-10 7/8-14 1 1/16 - 1.70 1.14 87033607 167269
12-10-12 1 1/16 - 12 1 1/16 - 1.94 1.29 87035435 167266
-16 1 5/16 - 12 1 5/16 1.81 2.05 1.40 9618949 167268
Dash sizes are listed in order of Run End , Run End and Adjustable Branch End

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 26 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 21: TEE—Male 37o Flare to Male Pipe Threads on the Run
SAE 070424

W=
Wrench
Tube Flare End Pipe End Flats LF = Flare LP = Pipe LI =
Width, Part
Dash Thread Size Thread Size Leg Length End Length Installed
In. Number
Size UN/UNF-2A NPTF In. In. Length, In.
Forging
Min.
-4 7/16 - 20 1/8 - 27 7/16 0.89 0.78 0.54 86513027
-5 1/2 - 20 1/8 - 27 9/16 0.95 0.81 0.57 86513028
-6 9/16 - 18 1/4 - 18 9/16 1.06 1.09 0.75 86505962
6-8 9/16 - 18 3/8 - 18 9/16 1.17 1.19 84294331
-8 3/4 - 16 3/8 - 18 3/4 1.25 1.22 0.87 176079
-10 7/8 - 14 1/2 - 14 7/8 1.45 1.47 1.01 176080
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.66 1.59 1.11 163661
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.81 1.97 1.40 86513029

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 27 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 22: TEE—Male 37o Flare to Male Pipe Threads on the Branch
SAE 070425

W=
Flare End Wrench
Tube Thread Pipe End Flats LF = Flare LP = Pipe LI =
Part
Dash Size Thread Size Width, In. Leg Length End Length Installed
Number
Size UN/UNF- NPFT In. In. Length, In.
Forging
2A
Min.
-4 7/16 - 20 1/8 - 27 7/16 0.89 0.78 0.55 86513030
-5 1/2 - 20 1/8 - 27 9/16 0.95 0.81 0.57 86513031
-6 9/16 - 18 1/4 - 18 9/16 1.06 1.09 0.75 86513032
6-6-6 9/16 - 18 3/8 - 18 3/4 1.14 1.22 0.87 87508191
-8 3/4 - 16 3/8 - 18 3/4 1.25 1.22 0.87 86977778
8-8-8 3/4 - 16 1/2 - 14 7/8 1.34 1.47 1.01 86513033
-10 7/8 - 14 1/2 - 14 7/8 1.45 1.47 1.01 86513034
-12 1 1/16 - 12 3/4 - 14 1 1/16 1.66 1.59 1.11 164913
-16 1 5/16 - 12 1 - 11 1/2 1 5/16 1.81 1.97 1.40 9790547
16-10 1 5/16 – 12 3/4 - 14 1 5/16 1.81 1.78 1.01 87039438
7/8-14
16-12 1-5/16-12 3/4-14 1-5/16 1.76 1.78 1.01 87690479
1-1/16-12
-20 1 5/8 - 12 1 1/4 - 11 1/2 1 5/8 2.06 2.38 1.79

Dash sizes are listed in order of Run End , Run End and Branch End

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 28 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 23: TEE—Male 37o Flare to Female Pipe Threads on the Run
SAE 070426

Tube Flare End Pipe Port W = Wrench LF = Flare LP = Pipe

Part
Dash Thread Size Thread Size Flats Width, Leg Length End Length
Number
Size UN/UNF-2A NPTF In. In. In.
-4 7/16 - 20 1/8 - 27 9/16 1.08 0.66 47834
-5 1/2 - 20 1/8 - 27 9/16 1.08 0.66 86513124
-6 9/16 - 18 1/4 - 18 3/4 1.24 0.88 47836
-8 3/4 - 16 3/8 - 18 7/8 1.42 1.02 15679
-10 7/8 - 14 1/2 - 14 1 1/16 1.64 1.24 47837
-12 1 1/16 - 12 3/4 - 14 1 5/16 1.89 1.36 47838
-16 1 5/16 - 12 1 - 11 1/2 1 5/8 2.17 1.62 86513125

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 29 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 24: TEE—Male 37o Flare to Female Pipe Threads on the Branch
SAE 070427

Tube Flare End Pipe End W = Wrench LF = Flare LP = Pipe

Part
Dash Thread Size Thread Size Flats Width, Leg Length End Length
Number
Size UN/UNF-2A NPTF In. In. In.
-4 7/16 - 20 1/8 - 27 9/16 1.08 0.66 86513035
-5 1/2 - 20 1/8 - 27 9/16 1.08 0.66 86513036
-6 9/16 - 18 1/4 - 18 3/4 1.24 0.88 86513037
-8 3/4 - 16 3/8 - 18 7/8 1.42 1.02 86513038
-10 7/8 - 14 1/2 - 14 1 1/16 1.64 1.24 132342
-16 1 5/16 - 12 1 - 11 1/2 1 5/8 2.17 1.63 86513039

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 30 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 25: CROSS—Male 37o Flare to Male 37o Flare on all Legs
SAE 070501

Tube Thread W = Wrench LF = Flare

Flats Width, In. Part
Dash Size Leg Length
Number
Size UN/UNF-2A Forging Barstock In.

-4 7/16 - 20 7/16 9/16 0.89 86513040

-5 1/2 - 20 9/16 5/8 0.95 86513041
-6 9/16 - 18 9/16 13/16 1.06 86513042
-8 3/4 - 16 3/4 7/8 1.25 86513043
-10 7/8 - 14 7/8 1 1/8 1.45 86513044
-12 1 1/16 - 12 1 1/16 1 3/8 1.66 86513045
-16 1 5/16 - 12 1 5/16 1 5/8 1.81 86513046

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 31 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 26: PLUG—Male 37o Flare with Hex Head
SAE 070109

Tube Thread W = Hex L = Overall H = Head

Part
Dash Size Head Size, Length, Height,
Number
Size UN/UNF-2A In. In. In.
-4 7/16 - 20 1/2 0.80 0.22 86513047
-5 1/2 - 20 9/16 0.80 0.22 86513048
-6 9/16 - 18 5/8 0.84 0.25 86513049
-8 3/4 - 16 13/16 0.94 0.25 86511868
-10 7/8 - 14 15/16 1.10 0.31 86513050
-12 1 1/16 - 12 1 1/8 1.28 0.38 86513051
-14 1 3/16 - 12 1 1/4 1.31 0.38 9637058
-16 1 5/16 - 12 1 3/8 1.33 0.38 9790527
-20 1 5/8 - 12 1 11/16 1.45 0.46 92080509

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 32 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 27: CAP—Female 37o Flare with Hex Body
SAE 070112

SHAPE 070112A SHAPE 070112 (OPTIONAL)

Tube Thread W = Hex Overall Length,

In. Part
Dash Size Head Size,
Number
Size UN/UNF-2A In. L L1
-3 3/8-24 7/16 0.57 13367
-4 7/16 - 20 9/16 0.67 0.59 86511869
-5 1/2 - 20 5/8 0.77 0.61 9635087
-6 9/16 - 18 11/16 0.81 0.625 574342
-8 3/4 - 16 7/8 0.94 0.75 262159
-10 7/8 - 14 1 1.07 0.84 129200
-12 1 1/16 - 12 1 1/4 1.24 0.91 219606
-16 1 5/16 - 12 1 1/2 1.29 1.02 9790528
-20 1 5/8 - 12 2 1.39 1.06 73456
-24 1 7/8 - 12 2 1/4 1.70 1.18 91710913

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 33 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 28: CONNECTOR—Male 37o Flare to Female Pipe Threads
SAE 070103

Tube Flare End Pipe Port L=

W = Hex Part
Dash Thread Size Thread Size Length,
Size, In. Number
Size UN/UNF-2A NPTF In.
-4 7/16 - 20 1/8 - 27 9/16 1.19 86508995
-5 1/2 - 20 1/8 - 27 9/16 1.17 86513061
-6 9/16 - 18 1/4 - 18 3/4 1.40 241971
6-6 9/16 - 18 3/8 - 18 7/8 1.47 19959
-8 3/4 - 16 3/8 - 18 7/8 1.56 167503
-8 3/4 - 16 1/2-14 1 1/8 1.79 84158580
-10 7/8 - 14 1/2 - 14 1 1/8 1.89 86513062
-12 1 1/16 - 12 3/4 - 14 1 3/8 2.06 86513063

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 34 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 29: REDUCER— 37 Degree Flared Tube
(These Fittings are Non SAE Standard)

Inch Sizes
Tube 1 2 C LA
Dash Straight Straight In. Hex Width Hole Dia. Length Part
Size Thread Thread Nom. Max. Nom. Number

6-4 9/16-18 7/16-20 .688 .175 1.19 70926786

6-8 9/16-18 3/4-16 .875 .301 1.60 87411460
8-4 3/4-16 7/16-20 .875 .175 1.33 70923102
8-6 3/4-16 9/16-18 .875 .301 1.33 86624135
8-10 3/4-16 7/8-14 .937 .395 1.41 87039394
10-6 7/8-14 9/16-18 1.000 .301 1.41 84158895
10-8 7/8-14 3/4-16 1.000 .395 1.41 87029966
10-12 7/8-14 1 1/16-12 1.125 .488 1.49 87303664
8-12 3/4-16 1 1/16-12 1.125 .395 1.563 87316964
12-6 1 1/16-12 9/16-18 1.250 .301 1.46
12-8 1 1/16-12 3/4-16 1.250 .395 1.56 87648720
12-10 1 1/16-12 7/8-14 1.250 .488 1.57 87301344
12-16 1 1/16-12 1 5/16-12 1.375 .614 1.61 87029967
16-6 1 5/16-12 9/16-18 1.500 .301 1.65 51676260
16-8 1 5/16-12 3/4-16 1.500 .395 1.72 84278113
16-10 1 5/16-12 7/8-14 1.500 .488 1.79 87301329
16-12 1 5/16-12 1 1/16-12 1.500 .614 1.82 87032415
20-12 1 5/8-12 1 1/16-12 2.000 .614 2.02
20-16 1 5/8-12 1 5/16-12 2.000 .851 2.00 84545654
24-12 1 7/8-12 1 1/16-12 2.250 .614 2.19
24-16 1 7/8-12 1 5/16-12 2.250 .851 2.22
24-20 1 7/8-12 1 5/8-12 2.250 1.086 2.15
32-24 2 1/2-12 1 7/8-12 2.875 1.321 2.61

Metric Sizes
Tube 1 2 C L1
Dash Straight Straight In. Hex Width Hole Dia. Length Part
Size Thread Thread Nom. mm Max. Nom. Number

12 3/4-16 1/2-20 22 25.5 84427817

14-16 7/8-14 1/2-20 27 26 84427815

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 35 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 30: TUBE END REDUCER—Male 37o Flare to Female 37o Flare
SAE 070123
(requires style “B” nut)

Tube Thread Size Thread Size L = Overall LI = Installed

Part
Dash Tube End MatingNut Length, Length,
Number
Size UN/UNF-2A UN/UNF-2A In. In.
6-4 7/16 - 20 9/16 - 18 0.97 0.90 136659
8-4 7/16 - 20 3/4 - 16 1.00 0.91 128809
8-6 9/16 - 18 3/4 - 16 1.00 0.91 128995
10-4 7/16 - 20 7/8 - 14 1.03 0.95 86513083
10-6 9/16 - 18 7/8 - 14 1.03 0.95 86513080
12-4 7/16 - 20 3/4 - 16 1.09 0.98 86513084
12-6 9/16 - 18 1 1/16 - 12 1.09 0.98 265977
12-8 3/4 - 16 1 1/16 - 12 1.19 1.08 86513081
16-12 1 1/16 - 12 1 5/8 - 12 1.47 1.36 86513082

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 36 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 31: NUT—37o Flare - Style A
SAE 070111

B D C K J S E F X
Tube
Dash
Hex Hole Boss Full Relief Overall Hex Part
Straight Diameter
Width Dia. Dia. Thread Length Length Length No.
Size Thread Nom.
Nom. Max. Min. Min. Nom. Max. Nom.
-3 3/8-24 .437 .196 .246 .246 .09 .96 .27 .42
-4 7/16-20 .562 .258 .308 .295 .09 1.02 .33 .54
-5 1/2-20 .625 .321 .371 .295 .09 1.08 .33 .60
-6 9/16-18 .687 .383 .433 .297 .09 1.11 .34 .67
-8 3/4-16 .875 .508 .558 .339 .12 1.30 .45 .86
-10 7/8-14 1.0 .634 .694 .409 .19 1.50 .52 .98
-12 1 1/16-12 1.250 .759 .829 .464 .19 1.68 .64 1.24
-14 1 3/16-12 1.375 .884 .964 .464 .19 1.83 .69 1.36
-16 1 5/16-12 1.5 1.009 1.099 .495 .19 1.96 .73 1.48
-20 1 5/8-12 2.0 1.263 1.353 .495 .25 2.21 .73 1.98
-24 1 7/8-12 2.250 1.513 1.603 .578 .25 2.33 .83 2.24
-32 2 1/2-12 2.875 2.017 2.127 .745 .31 2.77 .92 2.86
There are no part numbers available at this time. Contact Engineering Standards for part number request.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 37 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 32: NUT—37o Flare - Style B (short)
SAE 070110 & ISO 8424-2

Tube Tube Thread L = Overall

W = Hex Size, Part
mm Dash Size Length,
In./mm Number
Size UN/UNF-2A In.
6 In. 9/16 47719
-4 7/16 - 20 0.61
mm 14 84363631
8 -5 1/2 - 20 In. 5/8 0.67 86513548
mm 17 5152434
10 -6 In. 11/16 136658
9/16 - 18 0.72
mm 19 5152424
12 In. 7/8 129428
-8 3/4 - 16 0.84
mm 22 5154711
In. 1 9626918
14 & 16 -10 7/8 - 14 0.97
mm 27 5155453
18 & 20 In. 1 1/4 86513085
-12 1 1/16 - 12 1.02
mm 32 5152396
25 In. 1 1/2 86513086
-16 1 5/16 - 12 1.12
mm 41 82038498
30 & 32 In. 2 86085
-20 1 5/8 - 12 1.22
mm 50 84363645
38 In. 2 1/4 84331294
-24 1 7/8 – 12 1.41
mm 60 84363646

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 38 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 33: BULKHEAD UNION—Male 37o Flare to Male 37o Flare Bulkhead
SAE 070601

All bulkhead fittings are supplied complete with locknut.

Tube Thread W = Hex L = Overall LB = Bulkhead
Part
Dash Size Size, Length End Length,
Number
Size UN/UNF-2A In. In. In.
-4 7/16 - 20 11/16 2.08 1.20 86508628
-5 1/2 - 20 3/4 2.08 1.20 86513088
-6 9/16 - 18 13/16 2.19 1.28 86513087
-8 3/4 - 16 1 2.44 1.44 264654
-10 7/8 - 14 1 1/8 2.74 1.58 9610690
-12 1 1/16 - 12 1 3/8 3.09 1.75 86508629
-16 1 5/16 - 12 1 5/8 3.14 1.75 9862007
-20 1 5/8 - 12 1 7/8 3.31 1.80 51420788

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 39 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 34: BULKHEAD 90 DEGREE ELBOW—Male 37o Flare to Male 37o Flare Bulkhead
SAE 070701

All bulkhead fittings are supplied complete with locknut.

Tube Thread W = Wrench Flats LF = Regular LB = Bulkhead LI = Inserted
Width, In. Part
Dash Size Leg Length, End Length, Leg Length,
Number
Size UN/UNF-2A Forging Barstock In. In. In.

-4 7/16 - 20 7/16 9/16 0.97 1.59 1.02 86513089

-5 1/2 - 20 9/16 5/8 1.06 1.72 1.02 86513090
-6 9/16 - 18 9/16 13/16 1.09 1.81 1.09 253449
-8 3/4 - 16 3/4 7/8 1.36 2.11 1.25 248973
-10 7/8 - 14 7/8 1 1/8 1.56 2.39 1.39 86513091
-12 1 1/16 - 12 1 1/16 1 3/8 1.78 2.67 1.56 248985
-16 1 5/16 - 12 1 5/16 1 5/8 1.94 2.80 1.56 86513092
-20 1 5/8 - 12 1 5/8 2 1/8 2.17 3.13 1.61 86060

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 40 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 35: BULKHEAD 45 DEGREE ELBOW—Male 37o Flare to Male 37o Flare Bulkhead
SAE 070801

All bulkhead fittings are supplied complete with locknut.

Tube Thread W = Wrench Flats LF = Regular LB = Bulkhead
Width, In. LI = Inserted Part
Dash Size Leg Length, End Length,
Leg Length, In. Number
Size UN/UNF-2A Forging Barstock In. In.

-4 7/16 - 20 7/16 9/16 0.72 1.53 1.02 86513094

-5 1/2 - 20 9/16 5/8 0.78 1.66 1.02 86513095
-6 9/16 - 18 9/16 13/16 0.83 1.67 1.09 86513096
-8 3/4 - 16 3/4 7/8 0.98 1.94 1.25 86513097
-10 7/8 - 14 7/8 1 1/8 1.11 2.17 1.39 86513098
-12 1 1/16 - 12 1 1/16 1 3/8 1.28 2.44 1.56 86513099
-16 1 5/16 - 12 1 5/16 1 5/8 1.47 2.56 1.56 86513598

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 41 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 36: BULKHEAD TEE—Male 37o Flare to Male 37o Flare Bulkhead on Run
SAE 070958

All bulkhead fittings are supplied complete with locknut.

Tube Thread W = Wrench LF = Regular Leg LB = Bulkhead LI = Inserted
Part
Dash Size Flats Width, Length, End Length, Leg Length,
Number
Size UN/UNF-2A In. In. In. In.
-4 7/16 - 20 7/16 .97 1.59 1.02 86613401
-6 9/16-18 9/16 1.09 1.81 1.09 47456949
-8 3/4 - 16 3/4 1.36 2.11 1.25 86511605
-10 7/8 - 14 7/8 1.56 2.39 1.39 86625276
-12 1 1/16 - 12 1 1/16 1.78 2.67 1.56 86513100
-16 1 5/16 - 12 1 5/16 1.94 2.80 1.56 86513101

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 42 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 37: BULKHEAD TEE—Male 37o Flare to Male 37o Flare Bulkhead on Branch
SAE 070959

All bulkhead fittings are supplied complete with locknut.

Tube Thread W = Wrench LF = Regular LB = Bulkhead End LI = Inserted
Part
Dash Size Flats Width, Leg Length, Length, Leg Length,
Number
Size UN/UNF-2A In. In. In. In.

-4 7/16 - 20 7/16 0.97 1.59 1.02 86513102

-5 1/2 - 20 9/16 1.03 1.62 1.02 86513103
-6 9/16 - 18 9/19 1.09 1.81 1.09 86513104
-8 3/4 - 16 3/4 1.36 2.11 1.25 86513599
-10 7/8 - 14 7/8 1.56 2.39 1.39 86513105
-12 1 1/16 - 12 1 1/16 1.78 2.67 1.56 86513106
-16 1 5/16 - 12 1 5/16 1.92 2.78 1.69 70927539

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 43 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 38: BULKHEAD CONNECTOR
(AIR-WAY)

Tube C C Part
Size OD L5 l1 HEX mm Number
2-4 1/4 1.844 1.203 .687 17.46 87552177

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 44 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts

Table 39: LOCKNUT, BULKHEAD —Locknut for Bulkhead Fittings (not a standard jam nut))
SAE 070118

Tube Dash Thread Size W = Hex T = Thickness, Part

Size UN/UNF-2A Size, In. In. Number
-4 7/16 - 20 11/16 0.25 87891*
-5 1/2 - 20 3/4 0.25 86513142
-6 9/16 - 18 13/16 0.27 87381288
-8 3/4 - 16 1 0.31 524036
-10 7/8 - 14 1 1/8 0.36 595460
-12 1 1/16 - 12 1 3/8 0.41 86513143
-14 1 3/16 - 12 1 1/2 0.41 47603496**
-16 1 5/16 - 12 1 5/8 0.41 86513144
-20 1 5/8 - 12 1 7/8 0.41 86513145

* Grade 2 Jam Nut used for Service (found in Std #86511348).

** Also shown on STPL550

All bulkhead fittings are supplied complete with locknut. The above part numbers are for Service Parts
purposes only, they are not to appear on assembly drawings.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 45 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 40: LOCKNUT—Straight Thread
SAE 070117

Tube Dash HEX SIZE Part

Thread Size B Thickness, D.
Size C. Number
-4 7/16 – 20 9/16 .27
-5 1/2 – 20 5/8 .27
-6 9/16 – 18 11/16 .29
-8 3/4 – 16 7/8 .33
-10 7/8 – 14 1 .38 86625069
-12 1 1/16 – 12 1 1/4 ..43 86637729
-14 1 3/16 – 12 1 3/8 .43
-16 1 5/16 – 12 1 1/2 .43
-20 1 5/8 - 12 2 .43

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 46 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 41: O-RING—SAE Straight Thread Port O-Ring
Standard Size Numbers

Tube Thread Size SAE Size O-Ring I.D. O-Ring

Dash Size UN/UNF-2A Number, O-Ring Nominal Part Number
-03 3/8 - 24 3-1 .301 86513328
-04 7/16 - 20 4-1 .351 165202
-05 1/2 - 20 5-1 .414 129270
-06 9/16 - 18 6-1 .468 9617873
-08 3/4 - 12 8-1 .644 128825
-10 7/8 - 14 10-1 .755 167269
-12 1 1/16 - 12 12-1 .924 167266
-14 1 3/16 - 12 14-1 1.047 9626929
-16 1 5/16 - 12 16-1 1.171 167268
-20 1 5/8 - 12 20-1 1.475 570186
-24 1 7/8 - 12 24-1 1.720 9626930
-32 2 1/2 - 12 32-1 2.337 9846875

O-rings are supplied complete with fittings as shown in Figures. The above table of part numbers is for
Service Parts and reference purposes. Additional information is contained in standard STPS140.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DH 47 OF 66 87367188 STPL110
UNCONTROLLED COPY When Printed
 Standard Parts
Table 42: SLEEVE, 37 Degree Flared
SAE 070115

INCH
A B F D E C G
Tube Dia. Dia.. Outside. Should Overall Radius Part
Dash Inside Dia. Max.. Max. Dia. Length Length Max. No.
Size Max. Max.. Max. Max.
2 .130 .172 .210 .267 .14 .36 .041
3 .193 .234 .272 .329 .16 .36 .041
4 .255 .297 .320 .383 .16 .43 .041 87016880
5 .318 .366 .380 .445 .18 .46 .041
6 .380 .432 .446 .502 .19 .52 .057 235670
8 .505 .562 .594 .682 .24 .58 .072 235671
10 .631 .690 .710 .797 .26 .68 .072 235672
12 .756 .826 .885 .972 .28 .70 .088 164912
14 .881 .953 1.010 1.097 .28 .78 .104
16 1.006 1.081 1.135 1.222 .30 .80 .104 637302
20 1.260 1.339 1.417 1.534 .33 .93 .104 86084
24 1.510 1.609 1.635 1.784 .36 1.14 .119
32 2.014 2.159 2.200 2.409 .43 1.21 .119

METRIC
ISO 8434
A B F D E C G
Tube Dia. Dia.. Outside. Should Overall Radius Part
Inside Dia. Max.. Max. Dia. Length Length Max.
OD No.
Max. Max.. Max. Max.
6 6.13 7.54 8.0 9.73 3.6 10.4 0.80 82002500
8 8.13 9.30 9.52 11.30 4.1 11.2 0.80 5152435
10 10.13 10.97 11.20 12.75 4.3 12.7 1.20 5152425
12 12.13 14.27 14.96 17.32 5.6 14.2 1.60 5154712
14 20 17 5155661
16 16.15 17.53 17.91 20.24 6.1 16.8 1.60 5155454
18 25 17 44909216
19 19.20 20.98 22.35 24.69 6.6 17.3 2.00 90408804
20 20.15 24.21 25.53 27.86 6.6 19.3 2.40 5152397
25 25.15 27.46 28.70 31.04 7.1 19.8 2.40 82038497
32 32.25 34.01 35.86 38.96 7.9 23.1 2.40
38 38.35 40.87 41.40 45.31 8.6 28.4 2.80
50 50.36 54.84 55.75 61.19 10.4 30.2 2.80

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 48 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 43: CONNECTOR—37 Flare Tube Swivel to Female Pipe
(These Fittings are Non SAE Standard)

T P A
Tube Dash
Part Number
Size Straight Dry Seal
Thread Pipe Thread Length
-4 7/16-20 1/8-27 .85
-4 7/16-20 1/4-18 1.19 87393629
-6 9/16-18 3/8-18 1.25 86624010
-6 9/16-18 1/2-14 1.42 84172218
-6 9/16-18 1/4-18 1.06 84281049
-6 9/16-18 1/4-18 1.26 48194543
-8 3/4-16 3/8-18 1.20 84281048
-8 3/4-16 1/2-14 1.48 84329841
-16 1 5/16-12 1 11-1/2 1.85
.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 49 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 44:UNION ELBOW—Flare Tube 90 Degree Bent Stem
(These Fittings are Non SAE Standard)

T A B D E
Tube Dash Part
Straight Center to Center to Hex Hex
Size Number
Thread Tube End End Width Width
-8 3/4-16 1.09 1.76 .81 .87
-10 7/8-14 1.23 1.89 .87 1.00 84488526
-10 7/8-14 2.55 1.89 .87 1.00 86333900
-12 1 1/16-12 1.81 2.50 1.12 1.25 84163831
-12 1 1/16-12 3.73 2.73 1.12 1.26 84163832
-16 1 5/16-12 2.14 2.80 1.37 1.50 47960679
-20 1 5/8-12 2.58 3.26 1.75 2.00
There are no part numbers available at this time. Contact Engineering Standards for part number request.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 50 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 45: UNION—37 Flare Braze Tube
(Brazed Connector)

INCH TUBE
Tube Dash B L3 E D T C Part
Size Thread ±.015 HEX Number
4-4 7/16-20 .796 .125 .252-.254 .576 .500 47690363
5-5 1/2-20 .796 .140 .315-.317 .576 .562
6-4 7/16-20 .820 .140 .377-.379 .550 .500
6-6 9/16-18 .843 .140 .377-.379 .593 .625 84177577
8-4 7/16-20 .820 .250 .502-.504 .550 .625
8-8 3/4-16 .937 .250 .502-.504 .687 .812 86836486
10-10 7/8-14 1.093 .250 .627-.629 .783 .937 87698754
12-12 1 1/16-12 1.281 .250 .752-.754 .901 1.125 84139326
14-14 1 3/16-12 1.312 .250 .877-.879 .932 1.250
16-12 1 1/16-12 1.002-1.004 .901 1.375 87020902
16-16 1 5/16-12 1.328 .312 1.002-1.004 .948 1.375 84299264
20-20 1 5/8-12 1.453 .312 1.252-1.254 .993 1.687
24-24 1 7/8-12 1.656 .312 1.502-1.504 1.126 2.000
32-32 2 1/2-12 2.046 .312 2.002-2.004 1.366 2.625
METRIC TUBE
Tube B L3 E D T C Part
OD Thread ±.015 HEX Number
8 1/2-20 21 4 8.2 14 17 5179121
10 9/16-18 23 6 10.2 16 17 5155586
10 1/2-20 21 4 10.2 14 17 5183496
12 9/16-18 23 4 12.2 16 17 5174443
12 3/4-16 24.7 6 12.2 16.7 21 44909281
14 7/8-14 28.7 5 14.2 19.3 24 5177878
16 7/8-14 28.7 5 16.2 19.3 24 5174365
16 1/2-20 23 6 16.15-16.25 14 24 84227698
18 1-1/16-12 31.9 6 18.2 21.9 30 44909209
20 1-1/16-12 31.9 6 20.2 21.9 30 5156416

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 51 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 46: CONNECTOR—37 Flare Tube Swivel Male to Female
(These Fittings are Non SAE Standard) Extender and Expander

Tube Dash 1 2 L S Part

Size Thread Size Thread Size Overall Length Hex Flats Number
4-4 7/16-20 7/16-20 1.432 1/2 91720417
5-5 1/2-20 1/2-20
6-6 9/16-18 9/16-18 1.61 11/16 47648716
8-8 3/4-16 3/4-16 1.77 7/8 47648718
8-10 3/4-16 7/8-14
10-10 7/8-14 7/8-14
12-10 1-1/16-12 7/8-14 2.20 1 87524553
12-12 1 1/16-12 1 1/16-12 2.27 1-1/4 87058492
16-12 1-5/16-12 1-1/16-12 2.31 1-1/2 87575679
16-16 1 5/16-12 1 5/16-12
20-16 1 5/8-12 1 5/16-12 2.50 1-11/16; 90395996
1-1/2 (End 2
Swivel)
20-20 1 5/8-12 1 5/8-12
24-24 1 7/8-12 1 7/8-12
32-32 2 1/2-12 2 1/2-12

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 52 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 47: ADAPTER—Female Straight Thread O-Ring Boss to Male Pipe
(These Fittings are Non SAE Standard)

Tube Dash B1 A L T C1 Part

Size Thread NPTF ±.020 Reference HEX Number
4-2 7/16-20 1/8-27 1.375 1.000 .687
5-2 1/2-20 1/8-27 1.375 1.000 .750
6-4 9/16-18 1/4-18 1.546 .984 .875
6-6 9/16-18 3/8-18 1.380 .875 47556789
8-6 3/4-16 3/8-18 1.500 .937 1.000 47765071
8-8 3/4-16 1/2-14 1.687 .937 1.000 47764210
10-8 7/8-14 1/2-14 1.812 1.062 1.250 47648013
12-12 1 1/16-12 3/4-14 1.968 1.218 1.375
14-12 1 3/16-12 3/4-14 2.031 1.281 1.500
16-16 1 5/16-12 1 11-1/2 2.156 1.218 1.875
20-20 1 5/8-12 1 1/4 11-1/2 2.250 1.281 2.000
24-24 1 7/8-12 1 1/2 11-1/2 2.281 1.281 2.250
32-32 2 1/2-12 2 11-1/2 2.312 1.281 2.875

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 53 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 48: CONNECTOR—37 Flare Female Swivel to Male Pipe
(Ref SAE Figure 140130)

Tube Dash 1 (37 FL) 2 (Male Pipe) LL L Hex Flats Part

Size Thread Size Thread Size Overall Length S1 S2 Number
UN/UNF-2B NPTF
4-2 7/16-20 1/8
4-4 7/16-20 1/4 0.85 1.46 9/16 9/16
5-2 1/2-20 1/8
5-4 1/2-20 1/4 0.88 1.57 5/8 5/8
6-4 9/16-18 1/4
6-6 9/16-18 3/8 0.95 1.59 11/16 3/4 86533577
6-8 9/16-18 1/2 1.97 11/16 7/8 90476319
8-6 3/4-16 3/8 0.95 1.69 7/8 7/8 47566299
8-8 3/4-16 1/2 1.97 7/8 7/8 47761142
10-8 7/8-14 1/2 1.03 2.281 1 1 87023962
10-12 7/8-14 3/4
12-6 1 1/16-12 3/8 86622967
12-8 1 1/16-12 1/2 1.17 2.15 1 1/4 1 1/4 87013350
12-12 1 1/16-12 3/4 1.15 2.15 1 1/4 1 1/4 47471965
16-12 1 5/16-12 3/4 1.21 2.33 1 1/2 1 1/2
16-16 1 5/16-12 1
20-20 1 5/8-12 1 1/4
24-24 1 7/8-12 1 1/2
32-32 2 1/2-12 2

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 54 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts

Table 49:ELBOW—37º Flare Adjustable Straight Thread 90º Long Elbow

(This is a Non-SAE Standard Fitting)

A Center to End B Center to End

C Straight Thread D Flare Thread Part Number
Straight Thread 37º Flare
1.812 1.781 3/4-16 3/4-16 87622772

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 55 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 50: SWIVEL—Straight Thread Connector 37º Swivel SAE-ORB

End Size
1 Dash Size 1 (TUBE OD IN.) 1 (37º 2 UN/UNF-2A A C4 Part Number
Swivel) (SAE-ORB)
-6 3/8 9/16-18 7/16-20 1.37 9/16 84485583
-6 3/8 9/16-18 9/16-18 1.43 11/16 47981406
-8 1/2 3/4-16 9/16-18 1.54 13/16 48180836
-8 1/2 3/4-16 3/4-16 1.61 7/8 87698808
-10 5/8 7/8-14 7/8-14 1.84 1 84580740
-10 5/8 7/8-14 3/4-16 1.67 1 84586982
-12 3/4 1-1/16-12 9/16-18 1.60 7/8 84191688
-12 3/4 1-1/16-12 1-1/16-12 2.07 1-1/4 84221265
-12 3/4 1-1/16-12 1-5/16-12 2.04 1-1/2 90329171
-16 1 1-5/16-12 1-1/16-12 2.14 1-1/2 90328218
-16 1 1-5/16-12 1-5/16-12 2.28 1-1/2 87725611

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 56 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts

Table 51:SWIVEL—37º Flare Male ORFS Female

T6
T2
Tube Swivel B D1 H Part
Tube End D2 FF
OD UN/UNF- Hex Drill Hex Number
UN/UNF-2A
2B
1/4 7/16-20 9/16-18 11/16 0.165 0.165 1.50 5/8
3/8 9/16-18 11/16-16 13/16 0.264 0.264 1.61 3/4 86624195
1/2 3/4-16 13/16-16 15/16 0.358 0.358 1.90 7/8 47764193
5/8 7/8-14 1-14 1-1/8 0.453 0.453 2.20 1-1/16 47786431
3/4 1-1/16-12 1-3/16-12 1-3/8 0.547 0.547 2.50 1-1/4
1 1-5/16-12 1-7/16-12 1-5/8 0.783 0.783 2.66 1-1/2
1-1/4 1-5/8-12 1-11/16-12 1-7/8 1.024 1.024 2.80 1-11/16

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 57 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 52:ELBOW—37º Flare Female Swivel Male NPTF
(These Fittings are Non SAE Standard)

End Size Parker

M M5 Y Part Number
1 2 Part Number
3/8 3/8-18 1.22 1.27 3/4 84305557 6-6 X6EF-S

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 58 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 53:UNION—37º Flare Female Fixed with Female Swivel

Thread Thread
Tube OD C C1 LL Part
UN/UNF-2A UN/UNF-2B
mm mm mm Number
mm in. T T6
28,30,32 1-1/4 1-5/8-12 1-5/8-12 50 50 47 84316427

Table 54:UNION—37º Flare Female Swivel Both Ends

Parker HX6 Series

Tube OD
End Size
in. FF H Part
Inch Inch Number
1 2
1/4 7/16-20 7/16-20 1.48 9/16
3/8 9/16-18 9/16-18 1.75 11/16 47567891
1/2 3/4-16 3/4-16 2.02 7/8 47594984
5/8 7/8-14 7/8-14 2.24 1 84476720
3/4 1 1/16-12 1 1/16-12 2.43 1 1/4 47594989
1 1 5/16-12 1 5/16-12 2.68 1 1/2

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 59 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 55: ELBOW, 90 Degree—37º Flare Female Swivel/SAE-ORB
Parker AOEX6 Series

End Size
M5 M7 Y Part
Inch Inch Inch Number
1 2
1/4 7/16-20 0.94 1.03 7/16
3/8 9/16-18 1.27 1.25 9/16
1/2 3/4-16 1.34 1.45 3/4 84603097
5/8 3/4-16 1.62 1.55 7/8 51434923
5/8 7/8-14 1.62 1.70 7/8
5/8 1 1/16-12 1.68 1.94 1 1/16 47856185
3/4 1 1/16-12 1.75 1.94 1 1/16 87612750
1 1 5/16-12 2.01 2.05 1 5/16

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 60 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 56: ELBOW, 90 Degree—37º Flare Male/Male BSPT (ISO 7)

End Size
M N Y Part
mm mm mm Number
F1 F2
9/16-18 1/4-19 BSPT 26.9 27.7 14 47530258
3/4-16 3/8-19 BSPT 32 31 19 51602187

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 61 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts

Table 57: CONNECTOR —37º Flare Female Swivel/Male BSPP ED Seal (ISO 1179)

Tube OD Thread Thread *Service

A C3 C4 D D1 LL Part
BSPP UN/UNF- ED Seal
mm mm mm mm mm mm Number
mm In. T4 2B T6 Part #

6 1/4 1/8-28 7/16-20 32 16 14 4 4 15 82016610

6 1/4 1/4-19 7/16-20 37 16 19 4 4 16 82019811 47425493
8 5/16 1/8-28 1/2-20 34 17 14 6 4 17 82016610
8 5/16 1/4-19 1/2-20 39 17 19 6 6 18 82019811
10 3/8 1/4-19 9/16-18 40 19 19 8 6 18 82019811
10 3/8 3/8-19 9/16-18 40 19 22 8 8 19 47636545 920018673
12 1/2 3/8-19 3/4-16 44 22 22 10 9 21 47636545 47601140
12 1/2 1/4-19 3/4-16 44 22 19 10 6 21 82019811
12 1/2 1/2-14 3/4-16 48 22 27 10 10 23 47888941
14, 15, 16 5/8 1/2-14 7/8-14 50 27 27 12 12 23 47888941 47888943
14, 15, 16 5/8 3/8-19 7/8-14 48 27 27 12 9 23 47636545 90421880
18,20 3/4 3/4-14 1 1/16-12 55 32 32 16 16 24 82019813
18, 20 3/4 1/2-14 1 1/16-12 53 32 27 16 14 25 47888941 47888944
25 1 1-11 1 5/16-12 61 38 41 22 22 27 84288615
25 1 3/4-14 1 5/16-12 59 38 36 22 18 27 82019813
Fitting part numbers include nut and ED seal.
ED Seal part numbers provided for Service parts purposes only.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 62 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts

Table 58: CONNECTOR — Bulkhead Adj Male 37º Flare - Female NPTF

Tube OD
J A B D CH CH1 Part
F NPTF
mm mm mm mm mm Number
mm In.

6 1/4 7/16-20 1/8-27 47.5 31.5 16 17 17 47550022

Table 59: CONNECTOR —37º Flare Male /Male BSPP

End Size
C1 C2 L Part
I (Hex)
mm mm mm Number
F1 F2
3/4-16 1/2 -14 BSPP 16.5 17.0 41 27 47408963

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 63 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 60: CONNECTOR, BRAZE —37º Flare Female

T
Part
J A T1 CH CH1
Number
MM. IN.
14 - 16 5/8 7/8-14 UNF-2A 38 16 24 27 47588957

Table 61: CONNECTOR — Bulkhead Adj Male 37º Flare - Male NPTF

Tube OD
1 2 Part
C2 L l1
UN/UNF-2A NPTF Number*
Dash mm In.

-12 20 3/4 1-1/16-12 3/4-14 1-3/8 2.95 1.75 84588113

-16 25 1 1-5/16-12 1-11-1/2 1-5/8 3.14 1.75 47708521
*Part Number is without Bulkhead Locknut. See Table 39 (SAE 070118) for Bulkhead Locknut part #’s.

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 64 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 62: CONNECTOR — Bulkhead Male 37º Flare - Male ORB
All bulkhead fittings are supplied complete with locknut.

Tube OD C C2
1 2 L l1 Part
Hex Hex
UN/UNF-2A UN/UNF-2A (in.) (in.) Number
Dash mm In. (in.) (in.)

-8 12 1/2 3/4-16 3/4-16 1 1 2.19 1.44 47727144

Table 63: CONNECTOR — Bulkhead Adj Male 37º Flare - Male NPTF
All bulkhead fittings are supplied complete with locknut.

Tube OD
1 2 Part
C2 L l1
UN/UNF-2A NPTF Number
Dash mm In.

-16 25 1 1-5/16-12 1-11-1/2 1-5/8 3.14 1.75 47777637

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 65 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed
 Standard Parts
Table 64: CONNECTOR—37 Flare Female Swivel to Male BSPT (ISO 7)

Tube OD
1 2 Part
L8 C4
UN/UNF-2A BSPT Number
Dash mm In.

-8 12 1/2 3/4-16 3/8-19 43 19 51602207

Table 65: SWIVEL—37º Flare Female Swivel ORFS Male

1 - 37º 2 ORFS
Tube Tube H LL* Part
Swivel Tube End C3
OD 1 OD 2 Hex (Ref.) Number
UN/UNF-2B UN/UNF-2A
3/8 3/8 9/16-18 11/16-18 11/16 3/4 1.06 90473701
3/4 3/4 1-1/16-12 1-3/16-12 1-1/4 1-1/4 1.48 91855049
1 1 1-5/16-12 1-7/16-12 1-1/2 1-1/2 1.64 91855050
1-1/4 1-1/4 1-5/8-12 1-11/16-12 2 1-3/4 1.77 91855051

LL* - End to base of flare

NAME REV. PAGE CNH NUMBERS

HYD FITTINGS - 37 DEGREE FLARE DF 66 OF 66 87367188 STPL110

UNCONTROLLED COPY When Printed