Republic of the Philippines

Department of Education
REGION VII - CENTRAL VISAYAS
Division of Cebu Province
DISTRICT OF DUMANJUG II
BITOON NATIONAL VOCATIONAL HIGH SCHOOL
3rd QUARTERLY EXAMINATION IN CSS 7

NAME: __________________________________________ SCORE:____________________

YEAR & SECTION: ________________________________ DATE:_____________________

GENERAL INSTRUCTION:
Read and follow the directions provided. Write your answers in CAPITAL LETTER.NO ERASURES ALLOWED.

TEST I. MULTIPLE CHOICE

Directions: Read each statement carefully and WRITE the letter that corresponds to the correct answer on
the blank before the number.

________1. It is used to prevent ESD damage to computer equipment.

A. Flat head screwdriver C. Anti-static mat
B. Philips head screwdriver D. Anti-static wrist strap

________2. It is used to stand on or place hardware on to prevent static electricity from building.
A. Anti-static wrist strap C. Flat head screwdriver
B. Philips head screwdriver D. Anti-static mat

________3. It is used to loosen or tighten slotted screws.

A. Anti-static wrist strap C. Torx screwdriver
B. Philips head screwdriver D. Flat head screwdriver

________4. It is used to loosen or tighten crosshead screws.

A. Hex driver C. Torx screwdriver
B. Flat head screwdriver D. Philips head screwdriver

________5. It is used to loosen or tighten screws that have a star-like depression on the top, a feature that is
mainly found on laptop.
A. Philips head screwdriver C. Hex driver
B. Flat head screwdriver D. Torx screwdriver

________6. It is sometimes called a nut driver, is used to tighten nuts in the same way that a screwdriver
tightens screws.
A. Philips head screwdriver C. Hex driver
B. Flat head screwdriver D. Torx screwdriver

________7. It is used to hold small parts.

A. Tweezers C. Needle-nose plier
B. Part retriever D. Wire cutter

________8. It is used to strip and cut wires.

A. Tweezers C. Wire cutter
B. Part retriever D. Needle-nose plier

________9. It is used to manipulate small parts.

 A. Wire cutter C. Tweezers
B. Part retriever D. Needle-nose plier

________10. It is used to retrieve parts from location that are too small for your hand to fit.
A. Wire cutter C. Part retriever
B. Tweezers D. Needle-nose plier

________11. It is used to light up areas that you cannot see well.

A. Cable ties C. Lint-free cloth
B. Flashlight D. Compressed air

________12. It is used to clean different computer components without scratching or leaving debris.
A. Cable ties C. Flashlight
B. Lint-free cloth D. Compressed air

________13. This is used to bundle cables neatly inside and outside of a computer
A. Lint-free cloth C. Flashlight
B. Cable ties D. Compressed air

________14. It used to blow away dust and debris from different computer parts without touching the
components.
A. Lint-free cloth C. Flashlight
B. Compressed air D. Cable ties

________15. It is used to test the integrity of circuits and the quality of electricity in computer components.
A. Lint-free cloth C. Part organizer
B. Multimeter D. Loopback Adapter

________16. Which part is known as "brain" of the computer?

A. CPU C. RAM
B. Monitor D. ROM

________17. What do you call to the permanent memory built into your computer?
A. ROM C. CPU
B. RAM D. CD-ROM

________18. Hardware devices can be classified into four distinct categories, which of the
following devices is NOT considered as input device?
A. Monitor C. Joystick
B. Keyboard D. Microphone

________19. Which of the following computer hardware does NOT belong to output devices?
A. Monitor C. Printer
B. Keyboard D. Speakers

________20. Which of the following software is an operating system that can be installed in your
computer?
A. Microsoft Windows C. Internet Explorer
B. Netscape D. Microsoft Word

________21. What does RAM stand for?

A. Readily Accessed Mailer C. Remote Authorization Mechanism
B. Random Access Memory D. Random Authorization Mechanism

________22. What do you call to the physical components of a computer system?

 A. Software C. Operating Systems
B. Hardware D. Web Browsers

________23. When you need to input data into your computer, which of the following devices is
BEST used?
A. Monitor C. Printer
B. Keyboard D. Plotter

________24. Why do you think cable connector should always be pulled on the handle not on the
cable itself?
A. because safety of the other people may be put at risk
B. because pins of the connector may bend
C. because wires connections inside the cable may loosen
D. because static may be transferred into the plug

________25. Which of the following statements best describe the main function of a computer power
supply unit (PSU)?
A. Holds all the files in the computer system
B. Provides all the necessary power source needed by the computer
C. Provides a temporary storage for succeeding retrieval of data
D. Performs all the necessary operations needed by the computer

________26. “Liquids such as water or soda should be taken away from the work area when
accomplishing task using computer.” Which of the following is the BEST reason why
we should always consider the given statement?
A. because liquids can spill in your work area
B. because liquids should not be taken away from the workplace
C. because liquids may cause short circuit
D. because liquids take off the focus of workers from their work

________27. Which of the following is known as programs that are installed on a computer system
that can readily be used?
A. Computerware C. Software
B. Hardware D. Peopleware

________28. Which of the following devices is used to display the result of instruction in a computer
system?
A. Input Device C. Output Device
B. Processing Device D. Storage Devices

________29. This is a storage device that can be used internal or external part.
A. Hard Disc Drive C. Solid State Drive
B. Power Supply Unit D. Windows Operating System

________30. Juan will be installing a new video game which requires better graphic display and
quality. Which of the following adapters is concerned on this situation?
A. Network Interface Card C. Video Card
B. Sound Card D. Modem
TEST II. TRUE OR FALSE

Directions: Write TRUE if the statement is correct and FALSE if it is wrong. Write your answers on the
blank before the number.

__________________1. All tools and equipment must be properly maintained so that workers are not
endangered.

__________________2. Preventive maintenance is the systematic care and protection of tools, equipment
and machines in order to keep them in a safe, usable condition, limit downtime and extend productivity.

__________________3. Damaged or defective equipment/tools should be tagged and removed from service.

__________________4. Most manufacturers can provide maintenance schedules for their equipment.

__________________5. Properly stored tools and equipment will be easy to find when needed and are less
likely to be lost.

__________________6. Random person can be responsible for overseeing equipment maintenance and
where the records are kept

__________________7. Parts should not be properly stored and unlabeled.

__________________8. Productivity is decreased because time is not wasted looking for tools, parts and
equipment.

__________________9. Workshop staff develop a sense of irresponsibility and shame in their work.

__________________10. Losing the copy of the maintenance schedule recommended by the manufacturer.

TEST III. FILL IN THE BLANKS

Directions: Find in the box the correct missing words. Write your answer on the blank before the number.

Equalized counterclockwise insulator lead isopropyl

clockwise philips four distilled Hex driver

__________________1. The purpose of an antistatic wrist strap is to ________ the electrical charge
between you and the equipment.

__________________2. Turn the screwdriver _________ to tighten the screw.

__________________3. Turn the screwdriver ________________ to loosen the screw.

__________________4. Use a ________ head screwdriver with crosshead screws.

__________________5. On electrical components, an excessive buildup of dust will act like an _________
and trap the heat.

__________________6. When compressed air is used to clean inside the computer, the air should be blown
around the components with a minimum distance of ______ inches from the nozzle.
__________________7. Pencils should not be used inside the computer to change the setting of switches or
to pry off jumpers because the tip contains _____ which can act as a conductor and may damage the
computer components.

__________________8. To clean the screens of CRT monitors, dampen a soft, clean, lint-free cloth with
_______ water and wipe the screen from top to bottom.

__________________9. Clean the contacts on components with _________ alcohol.

__________________10. Use a __________ to loosen and tighten bolts that have a hexagonal (six-sided)
head.

TEST IV. CALCULATE

Directions: Convert the decimal numbers shown below to binary. Show your solution. Write your answer on
the blank before the number.

__________________1. 03 __________________6. 58

__________________2. 17 __________________7. 69

__________________3. 29 __________________8. 75

__________________4. 33 __________________9. 80

__________________5. 45 __________________10. 91

“Everybody is a GENIUS, but if you judge a fish by its ability to climb a tree. It will live its whole life
believing that it is stupid.”

-by: Albert Einstein-

Prepared by:

MS. MARIAH JEANNE C. DE VERA