Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Fourth Semester Diploma Examination in Mechanical Engineering/Technology

    Uploaded by

    V V DEVADAS
    This document is a model question paper for a fourth semester diploma examination in mechanical engineering/technology. It covers four modules: metallurgy and machine tools. The paper has four parts testing different aspects of knowledge. Part A has short answer questions. Part B asks five out of seven short questions. Part C requires answering one full question from each module, with sub-questions testing concepts in more depth. The modules cover iron-carbon phase diagrams, heat treatments, cutting tools, lathe operations, drilling machines, milling and shaping machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fourth Semester Diploma Examination in Mechanical Engineering/Technology

    Uploaded by

    V V DEVADAS
    41 views2 pages
    This document is a model question paper for a fourth semester diploma examination in mechanical engineering/technology. It covers four modules: metallurgy and machine tools. The paper has four parts testing different aspects of knowledge. Part A has short answer questions. Part B asks five out of seven short questions. Part C requires answering one full question from each module, with sub-questions testing concepts in more depth. The modules cover iron-carbon phase diagrams, heat treatments, cutting tools, lathe operations, drilling machines, milling and shaping machines.

    Original Title

    4023 (1)

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a model question paper for a fourth semester diploma examination in mechanical engineering/technology. It covers four modules: metallurgy and machine tools. The paper has four parts testing different aspects of knowledge. Part A has short answer questions. Part B asks five out of seven short questions. Part C requires answering one full question from each module, with sub-questions testing concepts in more depth. The modules cover iron-carbon phase diagrams, heat treatments, cutting tools, lathe operations, drilling machines, milling and shaping machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views2 pages

    Fourth Semester Diploma Examination in Mechanical Engineering/Technology

    Uploaded by

    V V DEVADAS
    This document is a model question paper for a fourth semester diploma examination in mechanical engineering/technology. It covers four modules: metallurgy and machine tools. The paper has four parts testing different aspects of knowledge. Part A has short answer questions. Part B asks five out of seven short questions. Part C requires answering one full question from each module, with sub-questions testing concepts in more depth. The modules cover iron-carbon phase diagrams, heat treatments, cutting tools, lathe operations, drilling machines, milling and shaping machines.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    TED (15) 4023 Reg. No:............................

    RIVISION 2015 Signature ...........................

    FOURTH SEMESTER DIPLOMA EXAMINATION IN MECHANICAL


    ENGINEERING/TECHNOLOGY

    MODEL QUESTION PAPER

    METTALLURGY AND MACHINE TOOLS

    (Maximum marks :100)

    (Duration : 3 hrs)

    PART-A (Maximum marks :10 )

    I.(Answer the following questions in one or two sentences .Each question carry two marks)
    1) List any four crystal defects
    2) Name various types of chips
    3) Define machinability
    4) What is the use of drill bit
    5) Define gang milling

    PART B

    Maximum marks: 30

    II. (Answer any five of the following questions. Each question carries 6 marks )

    1) Draw the cooling curve for pure iron


    2) List the advantages of powder metallurgy
    3) Explain desirable properties of a cutting fluid
    4) Briefly explain any three lathe operations
    5) Classify the drilling machine
    6) Sketch the nomenclature of a plain milling cutter
    7) Explain functions of a shaper
    PART C

    (Maximum marks : 60)

    ( Answer one full question from each unit. Each question carries 15 marks )

    MODULE-I

    III. (a) draw iron carbon equilibrium diagram and indicate different phases 8

    (b) Describe the continuous cooling transformation (CCT) diagram 7

    OR

    IV. (a) List various heat treatment process and explain any two 8

    (b) Describe any two methods for making metal powders 7

    MODULE-II

    V. (a) Differentiate between orthogonal and oblique cutting 8

    (b) Sketch the nomenclature of a single point cutting tool 7

    OR

    VI. (a) Sketch the line diagram of a Centre lathe and mark important parts 8

    (b) List any four taper turning methods. Explain any two 7

    MODULE-III

    VII. (a) Draw the line diagram of a Drilling machine and mark the parts 8

    (b) Show the nomenclature of a taper shank twist drill 7

    OR

    VIII. (a) Differenciate up milling and down milling 8

    (b) What is indexing. Explain simple indexing in milling machine 7

    MODULE-IV

    IX. (a) Explain whitworth quick return mechanism in shaper 8

    (b) Describe uses of slotter 7

    OR

    X. (a) Compare shaper, slotter and planer 8

    (b) List the specification of a planner 7

    You might also like