Scribd
Upload
72 views1 page

Mandals - Dragman Extra

The Dragman Extra hose is designed for umbilical drag systems used to distribute slurry and manure in agricultural fields. It connects slurry reservoirs to tow tractors, which drag the hose through fields under severe tensile stress and abrasion. The Dragman Extra features a TPU cover that is 4-5 times more abrasion resistant than rubber and has substantially increased tensile strength to withstand the pulling forces. It is available in inner diameters ranging from 4 to 6 inches.

Uploaded by

plain xia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views1 page

Mandals - Dragman Extra

The Dragman Extra hose is designed for umbilical drag systems used to distribute slurry and manure in agricultural fields. It connects slurry reservoirs to tow tractors, which drag the hose through fields under severe tensile stress and abrasion. The Dragman Extra features a TPU cover that is 4-5 times more abrasion resistant than rubber and has substantially increased tensile strength to withstand the pulling forces. It is available in inner diameters ranging from 4 to 6 inches.

Uploaded by

plain xia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Dragman Extra

Mandals Dragman is a lightweight and very abrasion resistant hose for umbilical slurry drag systems.

Mandals Dragman and Dragman Extra are designed for Standard lengths up to 200 meters. Longer lengths on
umbilical drag systems used for distribution of slurry and request for diameters lower than 6 inches.
manure in agricultural fields. Hoses are connected between
slurry reservoirs (lagoons) and tow tractors. Between the NOTE: Never tow one part of the hose across another!
lagoon and the edge of the field transfer hoses are used
(Mandals Flexitex / Mandals Superman HVT), but the one or
two lengths behind the tow tractor are dragged in the field
and put under continuous severe stress. Mandals Dragman
Extra was designed with this extreme tensile stress and
abrasion in mind ideal for mine dewatering and open pit water
transfer. The TPU cover has abrasion resistance 4 – 5 times
that of commonly used rubber. The tensile strength has been
substantially increased to withstand the pull forces.

Technical Data
Inner Diameter Wall Thickness Weight Burst Pressure Tensile Strength *
inch mm inch mm lbs/ft kg/m psi bar x1000 lbs tons
4 102,0 +2,5 0,17 4,2 1,07 1,60 510 35 35,0 15,9
4 1/2 114,0 +2,5 0,17 4,2 1,15 1,73 510 35 39,0 17,7
5 127,0 +2,5 0,16 4,0 1,24 1,85 405 28 45,6 20,7
5 1/2 140,0 +3,0 0,16 4,0 1,35 2,03 405 28 54,7 24,8
6 152,0 +3,0 0,16 4,0 1,51 2,25 405 28 60,2 27,1

Maximum recommended Working Pressure is 50% of the listed values.


* Total theorethical longitudinal strength.

http://www.mandals.com/product/dragman-extra/ 2018-05-17

Powered by TCPDF (www.tcpdf.org)

You might also like