GD150T PDF
GD150T PDF
GD150T PDF
3rd Edition
May, 1997
GD 150T
5” STROKE
MODEL
TAE_ _H
PARTS LIST
MAINTAIN PUMP RELIABILITY AND PERFORMANCE WITH
GENUINE GARDNER DENVER PARTS AND SUPPORT SERVICES
Gardner Denver, AJAX, and OPI genuine pump tory of genuine parts and he is backed up for emergency
parts are manufactured to original tolerances and de- parts by direct access to the Gardner Denver Machinery
signed for optimum dependability. Design and material Inc. Master Distribution Center (MDC) in Memphis, Ten-
innovations are the result of years of experience with nessee.
hundreds of different pump applications. Reliability in ma-
terials and quality assurance are incorporated in our gen- Your authorized distributor can support your Gardner
uine replacement parts. Denver, AJAX and OPI pump needs with trained parts
specialists to assist you in selecting the correct replace-
Your authorized Gardner Denver, AJAX and OPI dis- ment parts.
tributor offers all the backup you’ll need. A worldwide
network of authorized distributors provides the finest Authorized distributor service technicians are factory–
product support in the pump industry. trained and skilled in pump maintenance and repair. They
are ready to respond and assist you by providing fast, ex-
Your local authorized distributor maintains a large inven- pert maintenance and repair services.
For the location of your local authorized Gardner Denver, AJAX and OPI distributor refer to the yellow pages
of your phone directory or contact:
When ordering parts, specify Pump MODEL and SERIAL per unit, quantity is indicated in parenthesis. SPECIFY
NUMBER (see nameplate on unit). The Serial Number EXACTLY THE NUMBER OF PARTS REQUIRED.
is also stamped on top of the cylinder end of the frame
(cradle area). DO NOT ORDER BY SETS OR GROUPS.
All orders for Parts should be placed with the nearest
authorized distributor. To determine the Right Hand and Left Hand side of a
pump, stand at the power end. Right Hand and Left Hand
Where NOT specified, quantity of parts required per are indicated in parenthesis following the part name, i.e.
pump or unit is one (1); where more than one is required (RH) & (LH), when appropriate.
3–1–526 Page 1
TABLE OF CONTENTS
Page
Maintain Pump Reliability and Performance with Genuine Gardner Denver Parts And Support Services . . . . . . . . . . 1
Instructions For Ordering Repair Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Matrix/Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power End . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5
Aluminum Bronze Fluid Cylinder – Low Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 7
Aluminum Bronze Fluid Cylinder – Medium Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9
Block Steel Fluid Cylinder – High Pressure (Tapered Seat Valves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
Block Steel Fluid Cylinder – High Pressure (For Use With Clamped–in Valves) . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
Block Steel Fluid Cylinder – Extra High Pressure (For Use With Clamped–in Valves) . . . . . . . . . . . . . . . . . . . . . . 14, 15
Stuffing Box, Plunger & Plunger Packing (838 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 16
Stuffing Box, Plunger & Plunger Packing (805 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 17
Stuffing Box, Plunger & Plunger Packing (242 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 18
Stuffing Box, Plunger & Plunger Packing (838 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 19
Stuffing Box, Plunger & Plunger Packing (805 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 20
Stuffing Box, Plunger & Plunger Packing (242 Style) (For Aluminum Bronze Cylinders) . . . . . . . . . . . . . . . . . . . . . . . 21
Stuffing Box, Plunger & Plunger Packing (805 Style) (For Block Steel Cylinders) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Stuffing Box, Plunger & Plunger Packing (242 Style) (For Block Steel Cylinders) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Stuffing Box, Plunger & Plunger Packing (805 Style) (For Block Steel Cylinders) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Stuffing Box, Plunger & Plunger Packing (242 Style) (For Block Steel Cylinders) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Disc Fluid Valves For Low Pressure – Cast Aluminum Bronze Cylinders – Model: TAEF . . . . . . . . . . . . . . . . . . . . . 26
Disc Fluid Valves For Medium Pressure – Cast Aluminum Bronze Cylinders – Model: TAEG . . . . . . . . . . . . . . . . . . 27
Disc Fluid Valves For High Pressure – Block Steel Cylinders With Tapered Seats – Model: TAEH . . . . . . . . . . . . . 28
Suction Valve – Wing Guided Without Insert – Aluminum Bronze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Discharge Valve – Wing Guided Without Insert – Aluminum Bronze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Abrasion Resistant Stainless Steel Wing Guided Valves – Tapered Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Abrasion Resistant Stainless Steel Wing Guided Valves – Clamped Seat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31, 32
Lubricator & Drive Assembly (Optional Equipment) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Valve Seat – Puller Rod Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Puller Heads – Disc Type Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Puller Heads – Wing Guided Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34, 35
Puller Heads – Severe Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37
Valve Cage Removal/Installation Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37
Valve Seat Driver Tools – Wing Guided Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37
Valve Seat Driver Tools – Severe Duty Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36, 37
3–1–526 Page 2
MATRIX/MENU
TRIPLEX PLUNGER PUMP – 5” STROKE – MODEL TAE
TWELVE (12) CHARACTER MODEL DESIGNATIONS
NOTICE TO CUSTOMER – To find the construction options for your pump unit,
FILL IN THE BALANCE OF LETTERS OR NUMBERS FROM YOUR UNIT T A E H
NAMEPLATE __ __ __ __ __ __ __ __ __ __ __ __
COLUMN NUMBER: 1 2 3 4 5 6 7 8 9 10 11 12
FOLLOW THE LINE DOWN AND OVER FROM EACH SPACE THUS FILLED
IN TO FIND THE APPROPRIATE CONSTRUCTION OPTION WITH WHICH
YOUR MACHINE IS EQUIPPED. THE NUMBER “9” IN ANY COLUMN SPACE
INDICATES “NOT APPLICABLE.” THE NUMBER “8” IN ANY COLUMN SPACE
INDICATES SPECIAL DESIGN – REFER TO FACTORY ORDER TICKET.
3–1–526 Page 3
POWER END
3–1–526
Page 4
301TAE810
(Ref. Drawing)
Order by Part Number and Description. Reference Numbers are for your convenience only.
POWER END
Ref. Ref.
No. Name of Part Qty. Part No. No. Name of Part Qty. Part No.
200TFE810
(Ref. Drawing)
3–1–526 Page 6
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref. TAEF
No. Name of Part Qty. Part No.
OPTIONAL EQUIPMENT
* Fluid cylinders are furnished with standard carbon steel studs installed. Stainless steel studs
may be installed by the customer.
3–1–526 Page 7
ALUMINUM BRONZE FLUID CYLINDER – MEDIUM PRESSURE
300TAE810
(Ref. Drawing)
3–1–526 Page 8
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref. TAEG
No. Name of Part Qty. Part No.
OPTIONAL EQUIPMENT
* Fluid cylinders are furnished with standard carbon steel studs installed. Stainless steel studs
may be installed by the customer.
3–1–526 Page 9
BLOCK STEEL FLUID CYLINDER – HIGH PRESSURE
(TAPERED SEAT VALVES)
201TFE810
(Ref. Drawing)
3–1–526 Page 10
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref. TAEH
No. Name of Part Qty. Part No.
OPTIONAL EQUIPMENT
3–1–526 Page 11
BLOCK STEEL FLUID CYLINDER – HIGH PRESSURE
(FOR USE WITH CLAMPED–IN VALVES)
202TFE810
(Ref. Drawing)
3–1–526 Page 12
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref. TAEL
No. Name of Part Qty. Part No.
OPTIONAL EQUIPMENT
3–1–526 Page 13
BLOCK STEEL FLUID CYLINDER – EXTRA HIGH PRESSURE
(FOR USE WITH CLAMPED–IN VALVES)
202TFE810
(Ref. Drawing)
3–1–526 Page 14
Order by Part Number and Description. Reference Numbers are for your convenience only.
Ref. TAEM
No. Name of Part Qty. Part No.
OPTIONAL EQUIPMENT
3–1–526 Page 15
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 16
Order by Part Number and Description. Reference Numbers are for your convenience only.
MODEL TAEF_H
Ref. 3–1/2” 3–1/4” 3”
No. Name of Part Qty. Part No. Part No. Part No.
3–1–526 Page 17
Order by Part Number and Description. Reference Numbers are for your convenience only.
MODEL TAEF_H
Ref. 4–1/4” 4” 3–3/4”
No. Name of Part Qty. Part No. Part No. Part No.
MODEL TAEF_H
Ref. 3–1/2” 3–1/4” 3”
No. Name of Part Qty. Part No. Part No. Part No.
3–1–526 Page 18
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 19
Order by Part Number and Description. Reference Numbers are for your convenience only.
MODEL TAEG_H
Ref. 2–1/4” 2”
No. Name of Part Qty. Part No. Part No.
3–1–526 Page 20
Order by Part Number and Description. Reference Numbers are for your convenience only.
MODEL TAEG_H
Ref. 2–1/4” 2”
No. Name of Part Qty. Part No. Part No.
3–1–526 Page 21
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 22
Order by Part Number and Description. Reference Numbers are for your convenience only.
PACKING ASSEMBLY
(Incl. Ref. Nos. 3 & 4) . . . . . . . . . . 3 200TDE224 206TQC4060 200QAF4020 207TQC4060
3 PACKING (242 Style) . . . . . . . . . . 3 60DD640 60DD671 60DD688 60DD669
4 BUSHING–GLAND . . . . . . . . . . . . 3 215TAE152 PS15215 2006340 PS15212
5 GLAND . . . . . . . . . . . . . . . . . . . . . . . 3 205TAE008 205TAE008 205TAE008 205TAE008
6 PIN, Stuffing Box Gland . . . . . . . . 3 62L45 62L45 62L45 62L45
7 PLUNGER (Colomony) . . . . . . . . . 3 201TAE038 16TA538 2006330 32TA538
7 PLUNGER (Ceramic) . . . . . . . . . . 3 205TDE038 28TA538 2014444 29TA538
7 PLUNGER (Tungsten Carbide) . . 3 211TFE038 212TFE038 213TFE038 214TFE038
3–1–526 Page 23
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 24
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 25
Order by Part Number and Description. Reference Numbers are for your convenience only.
SUCTION VALVE PART NO. PART NO. PART NO. PART NO.
FLUID VALVE
Incl. Ref. Nos. 1 thru 7 . . . . . . 3 200VLJ482 201VLJ482 202VLJ482 206VLJ482
1 RETAINER . . . . . . . . . . . . . . . . 3 2010582 2010583 2010584 2010955
3–1–526
DISCHARGE VALVE PART NO. PART NO. PART NO. PART NO.
FLUID VALVE
Incl. Ref. Nos. 1 thru 7 . . . . . . 3 210VLK482 211VLK482 212VLK482 216VLK482
1 RETAINER . . . . . . . . . . . . . . . . 3 2010582 2010583 2010584 2010955
2 FASTENER . . . . . . . . . . . . . . . . 3 2010598 2010598 2010598 2010598
3 PLUG–LOCK, THREAD . . . . . 3 2010602 2010602 2010602 2010602
A75300 4 SPRING (INNER) . . . . . . . . . . 3 2010604 2010604 2010604 2010604
5 SPRING (OUTER) . . . . . . . . . . 3 2010607 2010607 2010607 2010607
6 PLATE–VALVE . . . . . . . . . . . . . 3 2010611 2010611 2010611 2010956
7 SEAT–VALVE . . . . . . . . . . . . . . 3 2109446 2109447 2109448 2109447
SUCTION VALVE PART NO. PART NO. PART NO. PART NO.
FLUID VALVE
Incl. Ref. Nos. 1 thru 7 . . . . . . 3 200VHG482 201VHG482 202VHG482 206VHG482
1 RETAINER . . . . . . . . . . . . . . . . 3 2010585 2010586 2010587 2010736
3–1–526
SUCTION VALVE PART NO. PART NO. PART NO. PART NO.
FLUID VALVE
Incl. Ref. Nos. 1 thru 7 . . . . . . 3 200VHD482 201VHD482 202VHD482 206VHD482
1 RETAINER . . . . . . . . . . . . . . . . 3 2010591 2010592 2010593 2010985
3–1–526
DISCHARGE VALVE PART NO. PART NO. PART NO. PART NO.
FLUID VALVE
Incl. Ref. Nos. 1 thru 7 . . . . . . 3 210VHG482 211VHG482 212VHG482 216VHG482
1 RETAINER . . . . . . . . . . . . . . . . 3 2010588 2010828 2010590 2010985
2 FASTENER . . . . . . . . . . . . . . . . 3 2010599 2010599 2010599 2010599
3 PLUG–LOCK, THREAD . . . . . 3 2010603 2010603 2010603 2010603
4 SPRING (INNER) . . . . . . . . . . 3 2010606 2010606 2010606 2010606
5 SPRING (OUTER) . . . . . . . . . . 3 2116348 2116348 2116348 2116348
6 PLATE–VALVE . . . . . . . . . . . . . 3 2010829 2010829 2010829 2109019
7 SEAT–VALVE . . . . . . . . . . . . . . 3 2109443 2109450 2109444 2109450
A77168
TAPERED SEAT
3–1–526 Page 30
Order by Part Number and Description. Reference Numbers are for your convenience only.
A77169
CLAMPED SEAT
Ref. TAEL TAEM TAEM*
No. Name of Part Qty. Part No. Part No. Part No.
3–1–526 Page 31
Order by Part Number and Description. Reference Numbers are for your convenience only.
3 4
5
6 6
A77169–Rev.
CLAMPED SEAT
Ref. TAEL
No. Name of Part Qty. Part No.
3–1–526 Page 32
Order by Part Number and Description. Reference Numbers are for your convenience only.
3–1–526 Page 33
OPTIONAL EQUIPMENT
3–1–526 Page 34
Order by Part Number and Description. Reference Numbers are for your convenience only.
OPTIONAL EQUIPMENT
3–1–526 Page 35
OPTIONAL EQUIPMENT
3–1–526 Page 36
Order by Part Number and Description. Reference Numbers are for your convenience only.
OPTIONAL EQUIPMENT
THREADED TYPE
PULLER HEAD N/A 206QBX219 204QBX219 N/A N/A
ECCENTRIC TYPE
COMPLETE ASSEMBLY QBX91094 QBX91113 QBX91089 N/A N/A
4 COUPLING N/A 200QBX572 200QBX572 ––– –––
3 STUD N/A 201QAF110 201QAF110 ––– –––
2 SPACER 205QBX144 206QBX144 200QBX144 ––– –––
1 ECCENTRIC PULLER 212QBX219 213QBX219 207QBX219 ––– –––
3–1–526 Page 37
Beijing Office
北京因科思国际贸易有限公司 Increase International Trade
北京因科思工贸有限公司
地址:北京朝阳区胜古中路2号金基业大厦201室
邮编:100029
电话:010 - 8428 9077 ,8428 2935 ,8428 3983
传真:010 - 8428 8762
手机:139 1096 2635
Email:ownlevel@vip.sina.com
Website : http://www.increaseinc.cn
Xi'AN Office
西安嘉岳自动化技术有限公司
Garye Automation Technology Company
地 址 : 陕西省 - 西安市凤城二路天地时代广场B座23层22312室
( 西安经济技术开发区未央大道与凤城二路十字东北角)
邮 编 : 710016
电 话 : 029 - 8610 8648 , 029 - 8621 4592
手 机 : 153 1975 9129 , 153 1975 2262
传 真 : 029 - 8610 6806
E-mail : sales@garye.cn
Website : http://www.garye.cn