1change Over Relay
1change Over Relay
1change Over Relay
FEATURES
Circuit Diagram
l Variety of Operating Voltages.
1- 1+
l Switching Current upto
10 A at 230 VAC (or 30 VDC)
L-1 R-1
l Low Coil Drive Current
(4.7 mA to 100 mA) D-1
l Mounting Options available: Connectwell DIN Rail & Panel mounting relay modules are an excellent solution for transmission of electric
DIN Rail mounting & signals between PLC / DCS system and field actuator / sensor. These modules provides electrical isolation
Panel mounting. between control and load circuits with the help of electro-mechanical relays.
T E C H N I C A L I N F O R M AT I O N
Channels other than specified are available on request RELAY COIL DATA
Positive Bussing Possibility By using spare jumpers. Rated Coil Voltage 12 VDC 24 VDC 110 VAC 230 VAC
Negative Bussing Possibility By using spare jumpers. Coil Resistance (ohms) 275 1100 4600 26850
Power ON Indication 3 mm Red LED Rated Coil Current (mA) 43.6 21.8 11.0 4.7
Relay Protection Using 1N4007 Freewheeling Diode. Must Operate Voltage 70% max. of rated voltage 80% max. of rated voltage
Ambient Temperature (Operation) -20° C ... 50° C Must Release Voltage 15% max. of rated voltage 30% max. of rated voltage
Mounting Types ** DIN32 / DIN35 / DIN35-15 / PANEL** Max. Voltage 110% max. of rated voltage
Housing Insulation Material PVC / V0 Grade Voltages like 6 VDC, 48 VDC, 24 VAC etc.
Other Coil Voltages
Housing Colour Green are available on request.
Wire Connection Possibility 0.5 - 2.5 sq.mm / 30 -14 AWG Rated Current 10A @230 VAC; 10A @30 VDC
Stripping Length 8.3 mm Max. Switching Voltage 380 VAC, 125 VDC
Max. Electrical
1,800 operations/hr (under rated load)
Operating Frequency
2
w w w. c o n n e c t w e l l . c o m
O R D E R I N G I N F O R M AT I O N
12 VDC - 1 CO (SPDT) Relay modules 24 VDC - 1 CO (SPDT) Relay modules
# of Channels With Pluggable Relays With Soldered Relays # of Channels With Pluggable Relays With Soldered Relays
1 IMRE1SS1/12/OM IMRE1S1/12/OM 1 IMRE1SS1/24/OM IMRE1S1/24/OM
2 IMRE1SS2/12/OM IMRE1S2/12/OM 2 IMRE1SS2/24/OM IMRE1S2/24/OM
4 IMRE1SS4/12/OM IMRE1S4/12/OM 4 IMRE1SS4/24/OM IMRE1S4/24/OM
8 IMRE1SS8/12/OM IMRE1S8/12/OM 8 IMRE1SS8/24/OM IMRE1S8/24/OM
16 IMRE1SS16/12/OM IMRE1S16/12/OM 16 IMRE1SS16/24/OM IMRE1S16/24/OM
110 VAC - 1 CO (SPDT) Relay modules 230 VAC - 1 CO (SPDT) Relay modules
# of Channels With Pluggable Relays With Soldered Relays # of Channels With Pluggable Relays With Soldered Relays
1 IMRE1SS1/110A/OM IMRE1S1/110A/OM 1 IMRE1SS1/230A/OM IMRE1S1/230A/OM
2 IMRE1SS2/110A/OM IMRE1S2/110A/OM 2 IMRE1SS2/230A/OM IMRE1S2/230A/OM
4 IMRE1SS4/110A/OM IMRE1S4/110A/OM 4 IMRE1SS4/230A/OM IMRE1S4/230A/OM
8 IMRE1SS8/110A/OM IMRE1S8/110A/OM 8 IMRE1SS8/230A/OM IMRE1S8/230A/OM
16 IMRE1SS16/110A/OM IMRE1S16/110A/OM 16 IMRE1SS16/230A/OM IMRE1S16/230A/OM
Note : For Spring Cage terminals please add /SC after each part code.
1- 1+
L-1 R-1
Relay Modules with only 1 NO (SPST)
D-1
contacts are available on request.
GENERAL DATA
RLY-1
Relay Make / Series G2R-A1
Contact Type 1 NO
Output Current 10 A
NO C
Output Voltage 230 VAC, 30 VDC