104 - (Additional) TP-Link-MC110CS (PAGE 7)

Datasheet
Media Converters & Chassis
MC200CM
MC210CS MC112CS
TL-MC1400
MC220L MC111CS
MC100CM MC110CS
System Overview
The Chassis-based Media Converters include a number of independent media converters and a chassis capa-
ble of housing up to 14 media converters. You can start with single media converters, each equipped with its
own housing and AC power adapter. When you require more room, you can mount a chassis in your equip-
ment rack and install your media converters in the chassis --------the media converter can be slid into the chas-
sis.
Page 1 www.tp-link.com
TL-MC1400 14-Slot Rackmount Chassis
The TL-MC1400 14-Slot Rackmount Chassis is specially designed for accommodating chassis-based Media
Converters. It is a standard 19-inch 2U height rackmount chassis which can be suitably mounted in the stan-
dard 19-inch rack.
The chassis lets you install multiple media converters in an equipment rack together with the network devices
for which they provide media conversion. This provides for space saving, and the cabling will look neat. The
chassis comes with its own universal AC to DC power supply. For maximum power availability, an optional
redundant power supply is available for installation in the chassis.
Features:
14 bays to house up to 14 media converters*
Standard 19-inch rack-mountable with, 2U height
Non-stop operation & minimal downtime
Allows hot-swapping of media converters
Hot swappable redundant power supplies
Cooling fans on back side (together with power supplies)
Second AC to DC power supply for load-sharing purposes (Optional)
Media converter power isolation for electrical isolation from each bay
Offers over-voltage and over-current protections
specifications:
Input: 100-240V~50/60Hz 3.0A(Max)

Output:+9.5VDC, 9.5A(Max)
AC Power Supply
Vripple: ≤50mv
Noise: ≤100mv
Operating Temperature 0°C~40°C (32°F~104°F)
Storage Temperature -40°C~70°C (-40°F~158°F)
Operating Humidity 10%~90% non-condensing
Storage Humidity 5%~90% non-condensing
19.0*14.1*3.4in.(482*358*86)
Dimensions (W*D*H)
Standard 19-Inch, 2U height
Weight 8Kg
*The TL-MC1400 supports TL-MCXXX ver:2.0 only, not ver:1.0
MC200CM
The MC200CM media converter converts 1000BASE-SX fiber to 1000Base-T copper media or vice versa. It is
designed for use with 850nm multi-mode fiber cable utilizing the SC-Type connector, transmitting data up to
0.55 kilometers away. What's more, MC200CM can work as a stand alone device (no chassis required) or with
TP-LINK´s 19´system chassis.
Features:
Works at 1000Mbps in Full-Duplex mode for both TX port and FX port
Supports auto MID/MID-X for TX port
Provides switch configuration of Force /Auto transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely
Extends fiber distance up to 0.5km
Easy-to-view LED indicators provide status to monitor network activity easily
specifications:
Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x
Full Duplex Flow Control (IEEE 802.3x)3

Basic Function Extends fiber distance up to 0.5km using 50/125um fiber, 0.22km using 62.5/125um fibe
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Output Center Wavelength 850nm
1 1000M SC port
Ports
1 1000M RJ45 port (Auto MDI/MDIX)
1000BASE-T: UTP category 5, 5e cable (maximum 100m)

Network Media EIA/TIA-568 100Ω STP (maximum 100m)
1000BASE-FX: Multi-mode Fiber
LED Indicators PWR, FDX/Col, LINK/Act, SPD
Safety & Emission FCC, CE
Dimensions (W*D*H) 3.7*2.9*1.1 in. (94.5*73.0*27.0 mm)
Operating Temperature: 0°C~40°C (32°F~104°F)
Storage Temperature: -40°C~70°C (-40°F~158°F)
Environment Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
Power Supply External Power Adapter, 9V/0.6A
MC210CS
The MC210CS media converter converts 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. It is
designed for use with 1310nm single-mode fiber cable utilizing the SC-Type connector, transmitting data up
to 15 kilometers. What's more, MC210CS can work as a stand alone device (no chassis required) or with
TP-LINK’s 19’ system chassis.
Features:
Extends fiber distance up to 15km
specifications:
Full Duplex Flow Control (IEEE 802.3x)

Basic Function Extends fiber distance up to 15km
1 1000M SC port
Ports

LED Indicators PWR, LINK, RX
MC220L
The MC220L converts 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. It is designed for
use with 850nm multi-mode/ 1310nm single-mode/ WDM fiber cable utilizing the SC/LC-Type connector,
transmitting data up to 0.55 kilometers or 10 kilometers. What's more, MC220L can work as a stand alone
device (no chassis required) or with TP-LINK’s 19’system chassis.
Features:
FX port support hot-swappable
Extends fiber distance up to 0.55km for multi-mode fiber and 10km for single-mode fiber
specifications:
Full Duplex Flow Control (IEEE 802.3x)

Basic Function Extends fiber distance up to 15km
1 1000M SC port
Ports

LED Indicators PWR, LINK, RX
MC100CM
The MC100CM media converter converts 100BASE-FX fiber to 100Base-TX copper media or vice versa. It is
designed for use with 1310nm multi-mode fiber cable utilizing the SC-Type connector, transmitting data up to
2 kilometers. What's more, MC100CM can work as a stand alone device (no chassis required)or with TP-LINK’s
19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused by link failure.
Features:
Auto negotiation of 10/100Mbps and auto MID/MID-X for TX port
Provide switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
Extend fiber distance up to 2km
specifications:
Half/Full-Duplex transfer mode for FX port

Basic Function Half Duplex Flow Control (Backpressure)
1 100M SC port
Ports
10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

EIA/TIA-568 100Ω STP (maximum 100m)
Network Media 100BASE-T: UTP category 5, 5e cable (maximum 100m)
Environment
Operating Humidity: 10%~90% non-condensing
MC110CS
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice
versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector, transmitting data up
to 20 kilometers. What’s more, MC110CS can work as a stand alone device (no chassis required) or with
TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused by
link failure.
Features:
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely Extend fiber
distance up to 20－60km
specifications:

1 100M SC port
Ports

100BASE-FX: Single-mode Fiber
Environment
MC111CS
versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector. Adopting WDM tech-
nology, MC111CS takes only one fiber to transmit and receive data, which saves you half of the cabling cost. On
this fiber, it works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device
cooperating with the MC111CS will work at 1310nm on transferring data and at 1550nm on receiving data.
Another of TP-LINK’s media converters, the MC112CS is just one example of potential devices with which to
cooperate with the MC111CS.Moreover, MC111CS can work as a stand alone device (no chassis required) or
with TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused
by link failure.
Features:
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely Adopts WDM
technology, transmitting and receiving data on one single fiber
Extend fiber distance up to 20-60km
specifications:
1 100M SC port
Ports
TX: 1550nm
WDM RX: 1310nm
Environment
MC112CS
versa. It’s designed for use with single-mode fiber cable utilizing the SC-Type connector. Adopting WDM tech-
nology, MC112CS takes only one fiber to transmit and receive data, which saves you half of the cabling cost. On
this fiber, it works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device
cooperating with the MC112CS will work at 1310nm on transferring data and at 1550nm on receiving data.
Another of TP-LINK’s media converters, the MC111CS is just one example of potential devices with which to
cooperate with the MC111CS. Moreover, MC112CS can work as a stand alone device (no chassis required) or
with TP-LINK’s 19’’ system chassis, and is equipped with Link Fault Pass-through which minimizes losses caused
by link failure.
Features:
Link Fault Passthrough and Far End Fault minimize the losses caused by link failure timely Adopts WDM
technology, transmitting and receiving data on one single fiber
Extend fiber distance up to 20-60km
specifications:
1 100M SC port
Ports
TX 1310nm
WDM RX 1550nm
Environment
Type Connector Transmission Distance Transmission Media Output Center Wavelength
MC100CM RJ45--SC 2km Multi-mode Fiber,Cat-5 1310nm
MC110CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nm
MC111CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1550nmTX/1310nmRX
MC112CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nmTX/1550nmRX
More information of the 1000M series Media Converter
Model NO. Interface Transmission Distance Transmission Media Output Center Wavelength
0.55km(50/125um),
MC200CM RJ45--SC Multi-mode Fiber,TP 850nm
0.22km(62.5/125um)
MC210CS RJ45--SC 15km Single-mode Fiber,TP 1310nm
MC220L RJ45--LC 0.55km /10km Multi/Single-mode Fiber, TP 850nm/1310nm
Specifications are subject to change without notice. is a registered trademark of TP-LINK Technologies Co., Ltd. Other brands and product names are trademarks or registered
trademarks of their respective holders. No part of the specificationsmay be reproduced in any form or by any means or used to make any derivative such as translation, transfor-
mation, or adaptation without permission from TP-LINK Technologies Co., Ltd. Copyright © 2015 TP-LINK Technologies Co., Ltd. All rights reserved.

104 - (Additional) TP-Link-MC110CS (PAGE 7)

Uploaded by

Copyright:

Available Formats

104 - (Additional) TP-Link-MC110CS (PAGE 7)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

104 - (Additional) TP-Link-MC110CS (PAGE 7)

Uploaded by

Copyright:

Available Formats

Datasheet

Media Converters & Chassis

Input: 100-240V~50/60Hz 3.0A(Max)

Operating Temperature 0°C~40°C (32°F~104°F)

Storage Temperature -40°C~70°C (-40°F~158°F)

Operating Humidity 10%~90% non-condensing

Storage Humidity 5%~90% non-condensing

*The TL-MC1400 supports TL-MCXXX ver:2.0 only, not ver:1.0

Full Duplex Flow Control (IEEE 802.3x)3

1000BASE-T: UTP category 5, 5e cable (maximum 100m)

Power Supply External Power Adapter, 9V/0.6A

Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x

Full Duplex Flow Control (IEEE 802.3x)

1000BASE-T: UTP category 5, 5e cable (maximum 100m)

Power Supply External Power Adapter, 9V/0.6A

Full Duplex Flow Control (IEEE 802.3x)

1000BASE-T: UTP category 5, 5e cable (maximum 100m)

Power Supply External Power Adapter, 9V/0.6A

Standards and Protocols IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x

Half/Full-Duplex transfer mode for FX port

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

Power Supply External Power Adapter, 9V/0.6A

Half/Full-Duplex transfer mode for FX port

10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)

Power Supply External Power Adapter, 9V/0.6A

MC100CM RJ45--SC 2km Multi-mode Fiber,Cat-5 1310nm

MC110CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nm

MC111CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1550nmTX/1310nmRX

MC112CS-20 RJ45--SC 20km Single-mode Fiber,Cat-5 1310nmTX/1550nmRX

More information of the 1000M series Media Converter

MC210CS RJ45--SC 15km Single-mode Fiber,TP 1310nm

MC220L RJ45--LC 0.55km /10km Multi/Single-mode Fiber, TP 850nm/1310nm

You might also like