Scribd
Upload
1K views3 pages

Life Line Calculation PDF

1. This document contains calculations for the horizontal life line system (HLLS) of building MS-JKT05 for Kajima Indonesia. 2. The calculations determine parameters such as initial tension, maximum tension, deflection, horizontal and vertical reactions, bending moments for the HLLS which has 3 cable spans of 3 meters each using an 8mm diameter cable anchored to steel HSS pipe posts. 3. The calculations show that the cable rupture force is greater than the maximum tension and that the moment capacity of the anchors is greater than the maximum bending moment, indicating the design is adequate based on the given controls.

Uploaded by

Eri Febrianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views3 pages

Life Line Calculation PDF

1. This document contains calculations for the horizontal life line system (HLLS) of building MS-JKT05 for Kajima Indonesia. 2. The calculations determine parameters such as initial tension, maximum tension, deflection, horizontal and vertical reactions, bending moments for the HLLS which has 3 cable spans of 3 meters each using an 8mm diameter cable anchored to steel HSS pipe posts. 3. The calculations show that the cable rupture force is greater than the maximum tension and that the moment capacity of the anchors is greater than the maximum bending moment, indicating the design is adequate based on the given controls.

Uploaded by

Eri Febrianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Project : Kajima Indonesia Engineer : Eri Febrianto

Building : MS-JKT05 Check : Yudi Ramdani


No : 1 Date : 29-Oct-21
Calculation Sheet Subject : Horizontal Life Line System (HLLS) Rev : 0

Cable Anchor
Cable Diameter 8 mm Anchorage Type HSS pipe ø114.3 t=6
Cable weight (N/m) 2.37 N/m Post Length LA (m) 1.1 m
F rupt (kN) 33.8 kN Materal Steel
E (Gpa) 64.8 Gpa Ea (Gpa) 200 Gpa
A (mm2) 26.3 mm2 Ia (10^6 mm4) 3 10^6 mm4
Construction JIS 6x(1+6) Za (10^3 mm3) 52.5 10^3 mm3

Number of spans 3
Total Cable Length 9 m
Span Length L= 3 m
Initial deflection f1 = 0.1 m
Max Arresting Force F= 2.5 kN

Initial Tension T1 = w*L^2/8*f1 = 26.6625 N


Initial Cable Length Sa = (L/2) + ((w^2 * L^3)/(48 * T1^2)) = 1.504 m
Ka = 3*Ea*Ia / La^3 = 1352.367 N/mm
ek = T1 / Ka = 0.020
Diagonal length Sa*(1+(T1/(E*A)))+ek = 1.548 m
Arresting angle of cable Cos α= L/2*Diagonal length = 0.969
α= 14.26 degree
Maximum Tension T = √(F^2/(4*sin^2 α)) = 4.226 kN
Maximum Deflection f2 = ((w*L^2)+(2*F*L))/(8*T) = 1.075 m
Horizontal Reaction Rx = T*Cosα = 4.096 kN
Vertical Reaction Ry = T*sinα = 1.041 kN
Mf max Mf max= 1.5*La*Rx = 6.76 kN.m
Moment Nominal Mr = φ*Za*Fy = 10.08 kN.m

Control 1 Frupt > T 33.8 > 4.226 OK


Control 2 Mr > Mf max 10.08 > 6.76 OK
Project : Kajima Indonesia Engineer : Eri Febrianto
Building : MS-JKT05 Check : Yudi Ramdani
No : 1 Date : 29-Oct-21
Calculation Sheet Subject : Horizontal Life Line System (HLLS) Rev : 0

You might also like