FusionServer 2288H V6 Server Technical White Paper PDF

FusionServer 2288H V6 Server
Technical White Paper
Issue 07
Date 2022-11-11
xFusion Digital Technologies Co., Ltd.

Copyrights © xFusion Digital Technologies Co., Ltd. 2022. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of xFusion Digital Technologies Co., Ltd.
Trademarks and Permissions

and other xFusion trademarks are trademarks of xFusion Digital Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
In this document, "xFusion" is used to refer to "xFusion Digital Technologies Co., Ltd." for concise
description and easy understanding, which does not mean that "xFusion" may have any other meaning.
Any "xFusion" mentioned or described hereof may not be understood as any meaning other than "xFusion
Digital Technologies Co., Ltd.", and xFusion Digital Technology Co., Ltd. shall not bear any liability resulting
from the use of "xFusion".
The purchased products, services and features are stipulated by the contract made between xFusion and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees or
representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
xFusion Digital Technologies Co., Ltd.

Address: 9th Floor, Building 1, Zensun Boya Square, Longzihu Wisdom Island
Zhengdong New District 450046
Zhengzhou, Henan Province
People's Republic of China
Website: https://www.xfusion.com
2022-11-11 ii
Technical White Paper Contents
Contents
About This Document .................................................................................................................. vii

1 Overview......................................................................................................................................... 9
2 Features ......................................................................................................................................... 11
3 Physical Structure ....................................................................................................................... 14
3.1 2288H V6-32DIMM ................................................................................................................................................... 14
3.2 2288H V6-16DIMM ................................................................................................................................................... 15
4 Logical Structure ......................................................................................................................... 17

4.1 2288H V6-32DIMM ................................................................................................................................................... 17
4.2 2288H V6-16DIMM ................................................................................................................................................... 18
5 Hardware Description ................................................................................................................ 20

5.1 2288H V6-32DIMM ................................................................................................................................................... 20
5.1.1 Front Panel ............................................................................................................................................................... 20
5.1.1.1 Appearance ........................................................................................................................................................... 20
5.1.1.2 Indicators and Buttons .......................................................................................................................................... 22
5.1.1.3 Ports ...................................................................................................................................................................... 27
5.1.2 Rear Panel ................................................................................................................................................................ 31
5.1.2.1 Appearance ........................................................................................................................................................... 31
5.1.2.2 Indicators and Buttons .......................................................................................................................................... 33
5.1.2.3 Interface ................................................................................................................................................................ 36
5.1.3 Processors ................................................................................................................................................................ 38
5.1.4 Memory ................................................................................................................................................................... 39
5.1.4.1 DDR4 Memory ..................................................................................................................................................... 39
5.1.4.1.1 Memory ID ........................................................................................................................................................ 39
5.1.4.1.2 Memory Subsystem Architecture ....................................................................................................................... 40
5.1.4.1.3 Memory Compatibility ...................................................................................................................................... 41
5.1.4.1.4 DIMM Installation Rules ................................................................................................................................... 43
5.1.4.1.5 Memory Installation Positions ........................................................................................................................... 44
5.1.4.1.6 Memory Protection Technologies ...................................................................................................................... 47
5.1.4.2 PMem.................................................................................................................................................................... 47
5.1.4.2.1 Memory Identifier .............................................................................................................................................. 47
5.1.4.2.2 Memory Subsystem Architecture ....................................................................................................................... 48
2022-11-11 iii
5.1.4.2.3 Memory Compatibility ...................................................................................................................................... 49

5.1.4.2.4 DIMM Installation Rules ................................................................................................................................... 50
5.1.4.2.5 Memory Installation Positions ........................................................................................................................... 51
5.1.4.2.6 Memory Protection Technologies ...................................................................................................................... 52
5.1.5 Storage ..................................................................................................................................................................... 53
5.1.5.1 Drive Configurations ............................................................................................................................................ 53
5.1.5.1.1 8 x 2.5" Drive Pass-through Configuration........................................................................................................ 53
5.1.5.1.2 12 x 2.5" Drive Pass-through Configuration...................................................................................................... 59
5.1.5.1.4 12 x 3.5" Drive EXP Configuration ................................................................................................................... 78
5.1.5.1.6 24 x 2.5" Drive Configuration ........................................................................................................................... 98
5.1.5.1.7 25 x 2.5" Drive EXP Configuration ................................................................................................................. 108
5.1.5.2 Drive Indicators .................................................................................................................................................. 125
5.1.5.3 RAID Controller Card ........................................................................................................................................ 127
5.1.6 Network ................................................................................................................................................................. 127
5.1.6.1 OCP 3.0 Network Adapters................................................................................................................................. 127
5.1.7 I/O Expansion ........................................................................................................................................................ 128
5.1.7.1 PCIe Cards .......................................................................................................................................................... 128
5.1.7.2 PCIe Slots ........................................................................................................................................................... 128
5.1.7.3 PCIe Slot Description ......................................................................................................................................... 141
5.1.8 PSUs ...................................................................................................................................................................... 148
5.1.9 Fan Modules .......................................................................................................................................................... 149
5.1.10 LCD ..................................................................................................................................................................... 150
5.1.11 Boards .................................................................................................................................................................. 153
5.1.11.1 Mainboard ......................................................................................................................................................... 153
5.1.11.2 Drive Backplane................................................................................................................................................ 155
5.2 2288H V6-16DIMM ................................................................................................................................................. 167
5.2.1 Front Panel ............................................................................................................................................................. 167
5.2.1.1 Appearance ......................................................................................................................................................... 167
5.2.1.2 Indicators and Buttons ........................................................................................................................................ 169
5.2.2 Rear Panel .............................................................................................................................................................. 172
5.2.2.1 Appearance ......................................................................................................................................................... 172
5.2.2.2 Indicators and Buttons ........................................................................................................................................ 173
5.2.2.3 Interface .............................................................................................................................................................. 174
5.2.3 Processor ................................................................................................................................................................ 176
5.2.4 Memory ................................................................................................................................................................. 177
5.2.4.1 DDR4 Memory ................................................................................................................................................... 177
5.2.4.1.1 Memory ID ...................................................................................................................................................... 177
5.2.4.1.2 Memory Subsystem Architecture ..................................................................................................................... 178
5.2.4.1.3 Memory Compatibility .................................................................................................................................... 178
5.2.4.1.4 DIMM Installation Rules ................................................................................................................................. 180
2022-11-11 iv
5.2.4.1.5 Memory Installation Positions ......................................................................................................................... 180

5.2.4.1.6 Memory Protection Technologies .................................................................................................................... 182
5.2.5 Storage ................................................................................................................................................................... 183
5.2.5.1 Drive Configurations .......................................................................................................................................... 183
5.2.5.1.1 8 x 2.5" drive pass-through configuration........................................................................................................ 183
5.2.5.1.2 8 x 3.5" drive pass-through configuration........................................................................................................ 185
5.2.5.1.3 12 x 3.5" drive pass-through configuration...................................................................................................... 188
5.2.5.1.4 12 x 3.5" drive EXP configuration ................................................................................................................... 196
5.2.5.1.5 25 x 2.5" drive EXP configuration ................................................................................................................... 206
5.2.5.2 Drive Indicators .................................................................................................................................................. 215
5.2.5.3 RAID Controller Card ........................................................................................................................................ 218
5.2.6 Network ................................................................................................................................................................. 218
5.2.6.1 OCP 3.0 Network Adapters................................................................................................................................. 218
5.2.7 I/O Expansion ........................................................................................................................................................ 218
5.2.7.1 PCIe Card ........................................................................................................................................................... 218
5.2.7.2 PCIe Slots ........................................................................................................................................................... 219
5.2.7.3 PCIe Slot Description ......................................................................................................................................... 221
5.2.8 PSUs ...................................................................................................................................................................... 222
5.2.9 Fan Modules .......................................................................................................................................................... 223
5.2.10 LCD ..................................................................................................................................................................... 224
5.2.11 Board.................................................................................................................................................................... 226
5.2.11.1 Mainboard ......................................................................................................................................................... 226
5.2.11.2 Drive Backplane................................................................................................................................................ 228
6 Product Specifications .............................................................................................................. 234

6.1 2288H V6-32DIMM ................................................................................................................................................. 234
6.1.1 Technical Specifications ........................................................................................................................................ 234
6.1.2 Environmental Specifications ................................................................................................................................ 238
6.1.3 Physical Specifications .......................................................................................................................................... 240
6.2 2288H V6-16DIMM ................................................................................................................................................. 241
6.2.1 Technical Specifications ........................................................................................................................................ 241
6.2.2 Environmental Specifications ................................................................................................................................ 244
6.2.3 Physical Specifications .......................................................................................................................................... 246
7 Software and Hardware Compatibility ................................................................................ 248

8 Safety Instructions .................................................................................................................... 249
8.1 Security ..................................................................................................................................................................... 249
8.2 Maintenance and Warranty ....................................................................................................................................... 252
9 System Management ................................................................................................................ 253

10 Certifications ............................................................................................................................ 255
A Appendix ................................................................................................................................... 257
2022-11-11 v
B Glossary ...................................................................................................................................... 294

C Acronyms and Abbreviations ................................................................................................ 297
2022-11-11 vi
Technical White Paper About This Document
About This Document
Purpose
This document describes the FusionServer 2288H V6 rack server in terms of features,
structure, specifications, and component hardware and software compatibility.
Intended Audience
This document is intended for pre-sales engineers.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
2022-11-11 vii
Technical White Paper About This Document
Change History
Issue Release Date Change Description
07 2022-11-11 ⚫ Updated 5.1.5.1 Drive Configurations and

5.2.5.1 Drive Configurations .
⚫ Updated 5.1.7.2 PCIe Slots.
⚫ Updated 5.1.11.2 Drive Backplane and 5.2.11.2
Drive Backplane.
⚫ Updated 8.1 Security.
⚫ Updated A.3.1 2288H V6-32DIMM.
06 2022-09-10 Updated:
⚫ 5.1.5.1.6 24 x 2.5" Drive Configuration.
⚫ 6.1.3 Physical Specifications and 6.2.3 Physical
Specifications .
05 2022-08-12 ⚫ Modified 5.1.5.1.3 12 x 3.5" Drive Pass-through
Configuration, 5.1.5.1.4 12 x 3.5" Drive EXP
Configuration and 5.1.5.1.6 24 x 2.5" Drive
Configuration.
⚫ Modified 5.1.11.2 Drive Backplane.
⚫ Optimized 6.1.3 Physical Specifications and
6.2.3 Physical Specifications .
04 2022-06-25 ⚫ Added a figure that shows how to measure
dimensions.
⚫ Added A.1 Chassis Label.
⚫ Updated A.3 Operating Temperature Limitations.
⚫ Upgrades the standards of CE, UKCA, and CCC
certifications in the chapter 10 Certifications.
03 2022-05-18 Updated A.3 Operating Temperature Limitations.
02 2022-03-18 ⚫ Added 12 x 3.5-inch drive pass-through
configuration 4.
⚫ Added 5.1.4.2 PMem.
⚫ Added 10 Certifications.
⚫ Updated A.3 Operating Temperature Limitations.
⚫ Updated 6.2.1 Technical Specifications and 6.1.1
Technical Specifications, and claimed support for
U.2 drives.
⚫ Updated 5.1.4.1.6 Memory Protection
Technologies.
⚫ Optimized 12 x 3.5-inch drive pass-through
configuration 2, 12 x 3.5-inch drive pass-through
configuration 2 (4xNVMe), and 12 x 3.5-inch
drive EXP configuration 1.
01 2021-12-24 This issue is the first official release.
2022-11-11 viii
Technical White Paper 1 Overview
1 Overview
FusionServer 2288H V6 (2288H V6) is a new-generation 2U 2-socket rack server designed

for Internet, Internet Data Center (IDC), cloud computing, enterprise, and telecom
applications.
The 2288H V6 is ideal for IT core services, cloud computing, virtualization,
high-performance computing, distributed storage, big data processing, enterprise or telecom
service applications, and other complex workloads.
The reliable 2288H V6 features low power consumption, high scalability, easy deployment,
and simplified management.
For details about the 2288H V6 nameplate information, see A.4 Nameplate.
Figure 1-1 2288H V6-32DIMM with 12 x 3.5" drives (example)
2022-11-11 9
Technical White Paper 1 Overview
Figure 1-2 2288H V6-16DIMM with 12 x 3.5" drives (example)
2022-11-11 10
Technical White Paper 2 Features
2 Features
Performance and Scalability

⚫ Powered by the third-generation Intel® Xeon® Scalable Ice Lake processors, the server
provides up to 40 cores, 3.6 GHz frequency, a 60 MB L3 cache, and up to three 11.2
GT/s UPI links between the processors, which deliver supreme processing performance.
− It supports up to two processors with 80 cores and 160 threads to maximize the
concurrent execution of multithreaded applications.
− The L2 cache capacity is increased. Each core exclusively occupies 1.25 MB L2
cache, and at least 1.5 MB L3 cache.
− Intel Turbo Boost Technology 2.0 allows processor cores to run faster than the
frequency specified in the Thermal Design Power (TDP) configuration if they are
operating below power, current, and temperature specification limits.
− Intel Hyper-Threading Technology enables each processor core to run up to two
threads, improving parallel computation capability.
− The hardware-assisted Intel® Virtualization Technology (Intel® VT) allows
operating system (OS) to better use hardware to address virtualization workloads.
− Intel® Advanced Vector Extensions 512 (Intel AVX-512) significantly accelerates
floating-point performance for computing-intensive applications.
− Intel DL Boost (VNNI) is supported to improve the performance of deep learning
applications.
− The Intel® SGX and Intel® TME security features provide fine-grained data
protection through application isolation in the memory, and defend against physical
attacks through full memory encryption.
⚫ 2288H V6-32DIMM supports a maximum of 32 memory modules in the following
memory forms:
− The server supports a maximum of 32 DDR4 ECC 3200 MT/s DIMMs. The DDR4
ECC DIMMs support registered DIMMs (RDIMM) and load-reduced DIMMs
(LRDIMMs), which provide high speed and availability. A server supports a
maximum memory capacity of 8192 GB and a maximum memory bandwidth of
400 GB/s in theory.
− The server supports a maximum of 16 Intel® OptaneTM Persistent Memory Module
200 series (PMem modules for short), which must be used with the DDR4 memory
modules. When the DDR4 memory modules are used together, the server supports a
maximum of 12 TB memory capacity (calculated based on a maximum of 256 GB
capacity per DDR4 memory module and a maximum of 512 GB capacity per PMem
module).
2022-11-11 11
⚫ 2288H V6-16DIMM servers support a maximum of 16 DDR4 ECC 3200 MT/s DIMMs.
The DDR4 ECC DIMMs support registered DIMMs (RDIMM) and load-reduced
DIMMs (LRDIMMs), which provide high speed and availability. A server supports a
maximum memory capacity of 2048 GB and a maximum memory bandwidth of 400
GB/s in theory.
⚫ Flexible drive configurations meet a variety of business requirements and ensure high
elasticity and scalability of storage resources.
⚫ The use of all solid-state drives (SSDs) is supported. An SSD supports up to 100 times
more I/O operations per second (IOPS) than a typical hard disk drive (HDD). The use of
all SSDs provides higher I/O performance than the use of all HDDs or a combination of
HDDs and SSDs.
⚫ The use of 12 Gbit/s SCSI (SAS) serial connection for internal storage provides 2x data
transmission rate than the use of 6 Gbit/s SAS connection, maximizing the performance
of I/O-intensive applications.
⚫ With Intel integrated I/O, the third-generation Intel® Xeon® Scalable processors integrate
the PCIe 4.0 controller to shorten I/O latency and improve overall system performance.
⚫ 2288H V6-32DIMM supports a maximum of eleven standard PCIe 4.0 expansion slots.
2288H V6-16DIMM supports a maximum of two standard PCIe 4.0 expansion slots and
five standard PCIe 3.0 expansion slots.
⚫ 2288H V6-32DIMM supports two FlexIO cards (adapting to the OCP 3.0 network
adapter). 2288H V6-16DIMM supports one FlexIO card (adapting to the OCP 3.0
network adapter) with flexible configuration of GE/10GE/25GE/100GE network
adapters which are hot swappable.
Availability and Serviceability

⚫ Carrier-class components with process expertise ensure high system reliability and
availability.
⚫ The server supports hot-swappable SAS/SATA/NVMe drives. SAS/SATA drives support
RAID 0, 1, 1E, 10, 5, 50, 6, and 60, depending on the RAID controller card used. It also
uses a supercapacitor to protect the RAID cache data against power failures.
⚫ SSDs offer better reliability than HDDs, prolonging system uptime.
⚫ The server provides simplified O&M and efficient troubleshooting through the UID/HLY
indicators on the front panel, fault diagnosis LED, touch LCD diagnosis panel, and
iBMC web interface.
⚫ The mounting ears of 2288H V6-32DIMM provide iBMC direct connect management
ports to support local iBMC O&M, improving O&M efficiency.
⚫ A server provides two hot-swappable PSUs in 1+1 redundancy mode and four
hot-swappable fan modules in N+1 redundancy mode, improving system availability.
⚫ The built-in iBMC monitors system parameters in real time, triggers alarms, and
performs recovery actions to minimize the system downtime.
⚫ For details about the warranty policy, visit Warranty.
Manageability and Security

⚫ The built-in iBMC monitors server operating status and provides remote management.
⚫ A password is required for accessing the BIOS, ensuring system boot and management
security.
2022-11-11 12
⚫ The NC-SI feature allows a network port to serve as a management port and a service
port. The NC-SI feature is disabled by default and can be enabled through the iBMC or
BIOS.
⚫ The integrated Unified Extensible Firmware Interface (UEFI) improves setup,
configuration, and update efficiency and simplifies fault handling.
⚫ The server chassis panel ensures security of local data.
⚫ Chassis cover opening detection is supported to enhance security.
⚫ Intel Execute Disable Bit (EDB) function prevents certain types of malicious buffer
overflow attacks when working with a supported OS.
⚫ The Intel Converged Boot Guard & Trusted Execution Technology (Intel CBnT)
prevents malicious software attacks based on hardware, prevents the firmware from
being maliciously modified, and prevents the execution of unauthorized boot blocks. It
also allows applications to run in their own independent space without being affected by
other software running in the system, thereby enhancing security.
⚫ The secure boot based on the chip RoT implements level-by-level firmware verification
starting from the hardware RoT and builds a complete secure boot chain.
⚫ The trusted platform module (TPM) and trusted cryptography module (TCM) provide
advanced encryption functions, such as digital signatures and remote authentication.
⚫ The following requirements in NIST SP 800-147B are met:
− The BIOS firmware digital signature update mechanism is supported. During the
upgrade, the digital signature is verified to prevent unauthorized BIOS firmware
upgrade.
− The flash security protection mechanism is supported to prevent unauthorized
modification of the flash memory in the OS.
The service port with NC-SI enabled supports the following configuration:
⚫ Configuring any network port on the FlexIO card or PCIe NIC (with NC-SI enabled).
⚫ Enabling, disabling, and setting a virtual local area network (VLAN) ID for this port. The VLAN ID
is 0 and disabled by default.
⚫ Configuring IPv4 addresses (IPv4 address, subnet mask, and gateway) and IPv6 addresses (IPv6
address, prefix length, and gateway) for this port.
Energy Efficiency
⚫ The server supports 80 Plus Platinum/Titanium PSUs of different energy efficiency
levels. The PSU efficiency reaches 96% at 50% load.
⚫ Active/standby power supply and HVDC power supply are supported, improving the
efficiency of the power supply system.
⚫ Efficient voltage regulator-down (VRD) power supplies for boards minimize the energy
loss from DC/DC power conversion.
⚫ Area-based, Proportional-Integral-Derivative (PID) intelligent fan speed adjustment and
intelligent CPU frequency scaling optimize heat dissipation and reduce overall system
power consumption.
⚫ The improved thermal design with energy-efficient fans ensures optimal heat dissipation
and reduces system power consumption.
⚫ The server is protected with power capping and power control measures.
⚫ Staggered spin-up of drives reduces the server boot power consumption.
2022-11-11 13
Technical White Paper 3 Physical Structure
3 Physical Structure
3.1 2288H V6-32DIMM

3.2 2288H V6-16DIMM
3.1 2288H V6-32DIMM

Figure 3-1 Physical structure of a server with 12 x 3.5" drives (example)
1 I/O module 1 2 I/O module 2

3 PSU 4 Chassis
5 I/O module 3 6 Supercapacitor holder
2022-11-11 14
7 Air duct 8 Intrusion sensor

NOTE
The air duct cannot be installed
on a server with built-in drives.
9 Front-drive backplane 10 Left mounting ear plate

11 Fan module brackets 12 Fan module
13 Front drive 14 Right mounting ear plate
15 Processor heat sink 16 Processor
17 Cable organizer 18 Mainboard
19 BMC card 20 OCP 3.0 network adapter
21 Screw-in RAID controller 22 TPM/TCM
card
23 Memory - -
3.2 2288H V6-16DIMM

Figure 3-2 Physical structure of a server with 12 x 3.5" drives (example)
1 I/O module 1 2 PCIe Card
2022-11-11 15
3 PSU 4 Chassis
5 I/O module 3 6 Supercapacitor holder
7 Air duct 8 Intrusion sensor
NOTE
The air duct cannot be installed
on a server with built-in drives.
9 Front-drive backplane 10 Left mounting ear plate

11 Fan module brackets 12 Fan module
13 Front drive 14 Mainboard
15 Processor 16 Processor heat sink
17 Built-in PCIe card 18 Install the guide trough for the
built-in standard card
19 Memory 20 TPM/TCM
21 Screw-in RAID controller 22 OCP 3.0 network adapter
card
2022-11-11 16
Technical White Paper 4 Logical Structure
4 Logical Structure
4.1 2288H V6-32DIMM

4.2 2288H V6-16DIMM
4.1 2288H V6-32DIMM

Figure 4-1 Logical Structure
⚫ The server supports one or two third-generation Intel® Xeon® Scalable Ice Lake
processors.
⚫ The server supports up to 32 memory modules.
2022-11-11 17
⚫ The CPUs (processors) interconnect with each other through three UPI links at a speed
of up to 11.2 GT/s.
⚫ The PCIe riser card connects to the processors through PCIe buses to provide ease of
expandability and connection.
⚫ CPU1 and CPU2 each support one OCP 3.0 network adapter.
⚫ The screw-in RAID controller card on the mainboard connects to CPU 1 through PCIe
buses, and connects to the drive backplane through SAS signal cables. A variety of drive
backplanes are provided to support different local storage configurations.
⚫ The LBG-R Platform Controller Hub (PCH) is integrated on the mainboard to support
five USB 3.0 ports.
⚫ The BMC management chip integrated on the mainboard supports ports such as a video
graphic array (VGA) port, a management network port, and a serial port.
4.2 2288H V6-16DIMM

Figure 4-2 Logical Structure
⚫ The server supports one or two third-generation Intel® Xeon® Scalable Ice Lake
processors.
⚫ The server supports up to 16 memory modules.
⚫ The CPUs (processors) interconnect with each other through three UPI links at a speed
of up to 11.2 GT/s.
⚫ CPU1 supports one OCP 3.0 network adapter.
2022-11-11 18
⚫ The screw-in RAID controller card on the mainboard connects to CPU 1 through PCIe
buses, and connects to the drive backplane through SAS signal cables. A variety of drive
backplanes are provided to support different local storage configurations.
⚫ The LBG-R Platform Controller Hub (PCH) is integrated on the mainboard to support
three USB 3.0 ports.
⚫ The BMC management chip integrated on the mainboard supports ports such as a video
graphic array (VGA) port, a management network port, and a serial port.
2022-11-11 19
Technical White Paper 5 Hardware Description
5 Hardware Description
5.1 2288H V6-32DIMM

5.2 2288H V6-16DIMM
5.1 2288H V6-32DIMM

5.1.1 Front Panel
5.1.1.1 Appearance
⚫ 8 x 2.5" Drive Configuration
Figure 5-1 Front view
1 Drive 2 (Optional) Built-in DVD

drive (or LCD module)
3 Slide-out label plate (with an - -
SN label)
⚫ 12 x 2.5" drive configuration (4 x SAS/SATA + 8 x NVMe)
2022-11-11 20
1 Drive 2 Slide-out label plate (with an

SN label)
⚫ 12 x 3.5" drive configuration

SN label)

SN label)
2022-11-11 21

SN label)

SN label)
5.1.1.2 Indicators and Buttons
Indicator and Button Positions

2022-11-11 22
Figure 5-7 Indicators and buttons on the front panel
1 Fault diagnosis LED 2 Power button/indicator

3 Health status indicator 4 UID button/indicator
5 FlexIO card 1 presence 6 FlexIO card 2 presence
indicator indicator
7 iBMC direct connect - -
management port indicator

indicator indicator
2022-11-11 23

indicator indicator

indicator indicator
2022-11-11 24

indicator indicator

indicator indicator
Indicator and Button Descriptions
Table 5-1 Description of indicators and buttons on the front panel
Silkscreen Indicator and Description

Button
2022-11-11 25

Button
Fault diagnosis ⚫ ---: The device is operating properly.

LED ⚫ Error code: A component is faulty.
For details about error codes, see the
FusionServer Rack Server iBMC Alarm Handling.
Power Power indicator:
button/indicator ⚫ Off: The device is not powered on.
⚫ Steady green: The device is powered on.
⚫ Blinking yellow: The iBMC is starting. The power
button is locked and cannot be pressed. The iBMC
is started in about 1 minute, and then the power
indicator is steady yellow.
⚫ Steady yellow: The device is standby.
Power button:
⚫ When the device is powered on, you can press this
button to gracefully shut down the OS.
NOTE
For different OSs, you may need to shut down the OS as
prompted.
⚫ When the device is powered on, you can hold
down this button for 6 seconds to forcibly power
off the device.
⚫ When the power indicator is steady yellow, you
can press this button to power on the device.
Health status ⚫ Off: The device is powered off or is faulty.
indicator ⚫ Blinking red at 1 Hz: A major alarm has been
generated on the system.
⚫ Blinking red at 5 Hz: A critical alarm has been
⚫ Steady green: The device is operating properly.
UID The UID button/indicator helps identify and locate a
button/indicator device.
UID indicator:
⚫ Off: The device is not being located.
⚫ Blinking or steady blue: The device is being
located.
UID button:
⚫ You can control the UID indicator status by
pressing the UID button or using the iBMC.
⚫ You can press this button to turn on or off the
UID indicator.
⚫ You can press and hold down this button for 4 to
6 seconds to reset the iBMC.
2022-11-11 26

Button
FlexIO card Indicates whether the FlexIO card is detected.

presence ⚫ Off: The FlexIO card is not detected.
indicator
⚫ Blinking green at 0.5 Hz: The FlexIO card is
detected but is not powered on.
⚫ Blinking green at 2 Hz: The FlexIO card is
detected and has just been inserted.
⚫ Steady green: The FlexIO card is detected and the
power supply is normal.
iBMC direct Indicates the status when the iBMC direct connect
connect management port connects to a terminal (local PC or
management Android mobile phone):
port indicator ⚫ Off: No terminal is connected.
⚫ Blinking green at short intervals for 3 seconds and
then off: The port is disabled.
⚫ Steady green: The terminal is connected.
Indicates the status when the iBMC direct connect
management port connects to a USB device:
⚫ Blinking red at long intervals: The job fails or an
error is reported when the job is complete.
⚫ Blinking green at short intervals: The job is being
executed.
⚫ Blinking green at short intervals for 3 seconds and
then off: The port is disabled.
⚫ Steady green: The server configuration file is
being copied from the USB device or the job is
successfully completed.
5.1.1.3 Ports
Port Positions
Figure 5-13 Ports on the front panel
1 USB 3.0 port 2 iBMC direct connect
2022-11-11 27
management port
3 VGA port - -

management port
3 VGA port - -

management port
3 VGA port - -
2022-11-11 28

management port
3 VGA port - -

management port
3 VGA port - -

management port
3 VGA port - -
Port Description
Table 5-2 Ports on the front panel

Port Type Quantity Description
VGA portNote DB15 1 Used to connect a display

terminal, such as a monitor or
KVM.
2022-11-11 29
iBMC direct USB Type-C 1 Used to connect to a local PC or

connect NOTE mobile phone through a USB
management The USB 2.0
Type-C cable to monitor and
portNote protocol is manage the system.
supported. NOTE
Only local PCs running Windows 10
and mobile phones running Android
are supported.
⚫ To log in to the iBMC from the
local PC, enter https://IP address
of the iBMC management network
port in the address box of the
browser on the local PC.
⚫ When accessing the iBMC
through a mobile phone, you need
to use the mobile application
FusionMobile to access the iBMC.
For details, see the FusionMobile
User Guide.
Used to connect to a USB device.
NOTICE
⚫ Before connecting an external
USB device, ensure that the USB
device functions properly.
Otherwise, it may adversely
impact the server.
⚫ For details about how to connect a
USB device to the iBMC
management port, see
FusionServer Rack Server iBMC
User Guide.
USB port USB 3.0 2 Used to connect to a USB 3.0

device.
NOTICE
impact the server.
⚫ The USB 3.0 port can be used to
supply power to low-power
peripherals. However, the USB
3.0 port must comply with the
USB specifications. To run
advanced peripherals, such as
external CD/DVD drives, an
external power supply is required.
Note: The VGA port and iBMC direct connect management port cannot be used at the
same time.
2022-11-11 30
5.1.2 Rear Panel

5.1.2.1 Appearance
⚫ Server with a drive module or PCIe riser module on the rear panel
Figure 5-19 Rear view
1 I/O module 1 2 I/O module 2

3 I/O module 3 4 Power supply 2
5 PSU 1 6 (Optional) FlexIO card 2
NOTE
The FlexIO card slot supports
only OCP 3.0 network adapters.
7 (Optional) FlexIO card 1 - -

NOTE
⚫ I/O module 1 and I/O module 2 each support a PCIe riser module, 2 x 3.5" rear-drive module, or
module with 2 x 2.5" rear drives and one PCIe riser module.
⚫ I/O module 3 supports a PCIe riser module or 4 x 2.5" rear-drive module.
⚫ For details about the OCP 3.0 network adapter, see 5.1.6.1 OCP 3.0 Network Adapters .
⚫ The figure is for reference only. The actual configuration may vary.
⚫ Server with four GPUs on the rear panel
2022-11-11 31
1 Slot2 2 Slot3
3 Slot6 4 Slot7
5 PSU 2 6 Power supply unit (PSU) 1
7 (Optional) FlexIO card 2 8 (Optional) Slot 9
NOTE

NOTE
⚫ Server with 11 Standard PCIe Cards on the Rear Panel
1 Slot1 2 Slot2
3 Slot3 4 Slot4
5 Slot5 6 Slot6
2022-11-11 32
7 Slot7 8 Slot8
9 Slot9 10 Slot10
11 Slot11 12 Power supply 2
13 Power supply unit (PSU) 1 14 (Optional) FlexIO card 2
NOTE

NOTE
Indicator Positions
⚫ Server with a drive module or PRM on the rear panel
Figure 5-21 Indicators on the rear panel
1 Data transmission status 2 Connection status indicator of

indicator of the management the management network port
network port
3 Serial port indicator 4 UID indicator
NOTE
Reserved and unavailable
currently.
5 PSU indicator - -
2022-11-11 33

network port
NOTE
currently.
5 PSU indicator - -
⚫ Server with 11 standard PCIe cards on the rear panel

network port
NOTE
currently.
5 PSU indicator - -
2022-11-11 34
Indicator Description
Table 5-3 Indicators on the rear panel
Silkscreen Indicator Description
- Data transmission ⚫ Off: No data is being transmitted.

status indicator for ⚫ Blinking yellow: Data is being
the management transmitted.
network port
- Connection status ⚫ Off: The network port is not connected.
indicator for the ⚫ Steady green: The network port is
management connected properly.
network port
UID indicator The UID indicator helps identify and locate
a device.
⚫ Blinking or steady blue: The device is
being located.
NOTE
You can control the UID indicator status by
- PSU indicator ⚫ Off: No power is supplied.

⚫ Blinking green at 1 Hz:
− The input is normal, and the server is
standby.
− The input is overvoltage or
undervoltage.
− The PSU is in deep hibernation
mode.
⚫ Blinking green at 4 Hz: The firmware is
being upgraded online.
⚫ Steady green: The power input and
output are normal.
⚫ Steady orange: The input is normal but
there is no output.
NOTE
The possible causes of no power output are as
follows:
⚫ Power supply overtemperature protection
⚫ Power output overcurrent or short-circuit
⚫ Output overvoltage
⚫ Short-circuit protection
⚫ Device failure (excluding failure of all
devices)
2022-11-11 35
5.1.2.3 Interface
Port Positions
Figure 5-24 Ports on the rear panel
1 Management network port 2 Serial port

3 VGA port 4 USB 3.0 port
5 Socket for PSU 1 6 Socket for PSU 2

2022-11-11 36

Port Description
Table 5-4 Ports on the rear panel
Management RJ45 1 iBMC management network port,

network port which is used to manage the
server.
NOTE
The management network port is a
GE port that supports 100 Mbit/s and
1000 Mbit/s auto-negotiation.
Serial port RJ45 1 Default operating system serial

port used for debugging. You can
also set it as the iBMC serial port
by using the iBMC command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
VGA port DB15 1 Used to connect a display

KVM.
device.
NOTICE
⚫ The maximum current is 1.3 A for
an external USB device.
2022-11-11 37

impact the server.
PSU socket - 2 Used to connect to a power

distribution unit (PDU) through a
power cable. You can select the
PSUs as required.
NOTE
When determining the PSUs, ensure
that the rated power of the PSUs is
greater than that of the server.
5.1.3 Processors
⚫ The server supports one or two processors.
⚫ If only one processor is required, install it in socket CPU1.
⚫ Processors of the same model must be used in a server.
⚫ Contact your local sales representative or see "Search Parts" in the Compatibility
Checker to determine the components to be used.
2022-11-11 38
Figure 5-27 Processor positions
5.1.4 Memory
5.1.4.1 DDR4 Memory
5.1.4.1.1 Memory ID
You can determine the memory module properties based on the label attached to the memory
module.
Figure 5-28 Memory identifier
2022-11-11 39
No. Description Example
1 Capacity ⚫ 16 GB
⚫ 32 GB
⚫ 64 GB
⚫ 128 GB
⚫ 256 GB
2 Number of ranks ⚫ 1R: single-rank
⚫ 2R: dual-rank
⚫ 4R: quad-rank
⚫ 8R: octal-rank
3 Data width on the DRAM ⚫ x4: 4-bit
⚫ x8: 8-bit
4 Type of the memory interface ⚫ PC4: DDR4
5 Maximum memory speed ⚫ 2933 MT/s
⚫ 3200 MT/s
6 Memory latency parameters ⚫ W = 20-20-20
(CL-tRCD-tRP) ⚫ Y = 21-21-21
⚫ AA = 22-22-22
7 DIMM type ⚫ R = RDIMM
⚫ L = LRDIMM
5.1.4.1.2 Memory Subsystem Architecture

A server provides 32 memory slots. Each processor integrates eight memory channels.
Install the memory modules in the primary memory channels first. If the primary memory
channel is not populated, the memory modules in secondary memory channels cannot be used.
Table 5-5 Memory channels
CPU Channel Memory Slot
CPU 1 A (primary) DIMM000(A)

A DIMM001(I)
B (primary) DIMM010(B)
B DIMM011(J)
C (primary) DIMM020(C)
C DIMM021(K)
D (primary) DIMM030(D)
2022-11-11 40
D DIMM031(L)
E (primary) DIMM040(E)
E DIMM041(M)
F (primary) DIMM050(F)
F DIMM051(N)
G (primary) DIMM060(G)
G DIMM061(O)
H (primary) DIMM070(H)
H DIMM071(P)
CPU2 A (primary) DIMM100(A)
A DIMM101(I)
B DIMM111(J)
C DIMM121(K)
D DIMM131(L)
E DIMM141(M)
F DIMM151(N)
G DIMM161(O)
H DIMM171(P)
5.1.4.1.3 Memory Compatibility

Observe the following rules when configuring DDR4 memory modules:
2022-11-11 41
⚫ A server must use DDR4 memory modules of the same part number (P/N code), and the
memory speed is the minimum value of the following items:
⚫ Memory speed supported by a CPU
⚫ Maximum operating speed of a memory module
⚫ The DDR4 DIMMs of different types (RDIMM and LRDIMM) and specifications
(capacity, bit width, rank, and height) cannot be used together.
⚫ Contact your local sales representative or see "Search Parts" in the Compatibility Checker
to determine the components to be used.
⚫ The memory can be used with the third-generation Intel® Xeon® Scalable Ice Lake
processors. The maximum memory capacity supported by all processor models is the
same.
⚫ The total memory capacity is the sum of the capacity of all DDR4 DIMMs.
The total memory capacity refers to the capacity when DDR4 memory modules are fully
configured. For details about the memory capacity when PMem modules are used together
with DDR4 memory modules, see 5.1.4.2.3 Memory Compatibility.
⚫ For details about the capacity type of a single memory module, see "Search Parts" in the
Compatibility Checker.
⚫ The maximum number of memory modules supported depends on the memory type and
rank quantity.
Each memory channel supports a maximum of 8 ranks. The number of memory modules supported by
each channel varies depending on the number of ranks supported by each channel:
Number of memory modules supported by each channel ≤ Number of ranks supported by each memory
channel/Number of ranks supported by each memory module
⚫ A memory channel supports more than eight ranks for LRDIMMs.
A quad-rank LRDIMM generates the same electrical load as a single-rank RDIMM on a memory bus.
Table 5-6 DDR4 memory specifications
Parameter Specifications
Capacity per DDR4 16 32 64 128 256

memory module (GB)
Type RDIMM RDIMM RDIMM LRDIMM RDIMM
Rated speed (MT/s) 3200 3200 3200 3200 2933
Operating voltage (V) 1.2 1.2 1.2 1.2 1.2
Maximum number of 32 32 32 32 32
DDR4 DIMMs in a
2022-11-11 42
servera
Maximum DDR4 512 1024 2048 4096 8192
memory capacity of the
server (GB)
Actual 1DPCb 3200 3200 3200 3200 2933
rate
(MT/s) 2DPC 3200 3200 3200 3200 2933
⚫ a: The maximum number of DDR4 memory modules is based on dual-processor

configuration. The value is halved for a server with only one processor.
⚫ b: DPC (DIMM per channel) indicates the number of memory modules per channel.
⚫ The information listed in this table is for reference only. For details, consult the local
sales representative.
5.1.4.1.4 DIMM Installation Rules
This section applies to a server fully configured with DDR4 memory modules. If PMem modules are
used together, see 5.1.4.2.4 DIMM Installation Rules.
Observe the following when configuring DDR4 memory modules:

⚫ Install memory modules only when corresponding processors are installed.
⚫ Do not install LRDIMMs and RDIMMs in the same server.
⚫ Install filler memory modules in vacant slots.
Observe the following when configuring DDR4 memory modules in specific operating mode:
⚫ Rank sparing mode
− Comply with the general installation guidelines.
− At least two ranks must be configured for each channel.
− A maximum of two standby ranks can be configured for each channel.
− The capacity of a standby rank must be greater than or equal to that of other ranks
in the same channel.
⚫ Memory mirroring mode
− Each processor supports four integrated memory controllers (IMCs), and each IMC
has two channels for installing memory modules. The installed memory modules
must be identical in size and organization.
− For a multi-processor configuration, each processor must have a valid memory
mirroring configuration.
⚫ Memory scrubbing mode
2022-11-11 43
5.1.4.1.5 Memory Installation Positions

A server supports a maximum of 32 DDR4 memory modules. To maximize performance,
balance the total memory capacity between the installed processors and to load the channels
similarly whenever possible.
Observe the memory module installation rules when configuring memory modules. For
details, see Memory Configuration Assistant.
At least one DDR4 memory module must be installed in the primary memory channels
corresponding to CPU 1.
Figure 5-29 Memory slots
2022-11-11 44
Figure 5-30 DDR4 memory module installation guidelines (1 processor)
2022-11-11 45
Figure 5-31 DDR4 memory module installation guidelines (2 processors)
2022-11-11 46
5.1.4.1.6 Memory Protection Technologies

The following memory protection technologies are supported:
⚫ ECC
⚫ Memory Mirroring
⚫ Memory Single Device Data Correction (SDDC)
⚫ Failed DIMM Isolation
⚫ Memory Thermal Throttling
⚫ Command/Address Parity Check and Retry
⚫ Memory Demand/Patrol Scrubbing
⚫ Memory Data Scrambling
⚫ Post Package Repair (PPR)
⚫ Write Data CRC Protection
⚫ Adaptive Data Correction - Single Region (ADC-SR)
⚫ Adaptive Double Device Data Correction - Multiple Region (ADDDC-MR)
⚫ Partial Cache Line Sparing (PCLS)
5.1.4.2 PMem
5.1.4.2.1 Memory Identifier
1 Component Intel OptaneTM Persistent Memory
2022-11-11 47
2 SN 8089-A2-2008-00002461
3 Model NMB1XXD512GPSU4
4 Capacity (GB) ⚫ 128
⚫ 256
⚫ 512
5 SN QR code 8089-A2-2008-00002461

The server provides 32 memory slots. Each processor integrates eight memory channels, and
each memory channel supports only one PMem module.
PMem modules must be used with DDR4 memory modules.
Table 5-7 Memory channels
CPU 1 A (primary) DIMM000(A)

A DIMM001(I)
B DIMM011(J)
C DIMM021(K)
D DIMM031(L)
E DIMM041(M)
F DIMM051(N)
G DIMM061(O)
H DIMM071(P)
CPU2 A (primary) DIMM100(A)
A DIMM101(I)
2022-11-11 48
B DIMM111(J)
C DIMM121(K)
D DIMM131(L)
E DIMM141(M)
F DIMM151(N)
G DIMM161(O)
H DIMM171(P)

Observe the following rules when configuring PMem modules:
⚫ The PMem modules must be used with the DDR4 memory modules. For details, see
FusionServer PMem 200 User Guide.
⚫ The memory must be used with the third-generation Intel® Xeon® Scalable Ice Lake
same.
⚫ The PMem module can work only in App Direct Mode (AD) and Memory Mode (MM).
The total supported memory capacity is calculated as follows:
− PMem module in AD mode
Total memory capacity = Total capacity of all PMem modules+ Total capacity of all
DDR4 memory modules
− PMem module in MM mode
Total memory capacity = Total capacity of all PMem modules (The DDR4 memory
modules are used as the cache and therefore are not calculated as memory capacity.)
2022-11-11 49
For details about the AD and MM modes, see FusionServer PMem 200 User Guide.
rank quantity.
Table 5-8 PMem specifications

Capacity per PMem module (GB) 128 256

Rated speed (MT/s) 3200 3200
Operating voltage (V) 1.2 1.2
Maximum number of PMem modules in a 16 16
servera
Maximum PMem capacity of the server 2048 4096
(GB)b
Actual rate (MT/s) 3200 3200
⚫ a: The maximum number of PMem modules is based on dual-processor configuration.
The value is halved for a server with only one processor.
⚫ b: The maximum PMem capacity varies depending on the PMem working mode.

⚫ Observe the following when configuring PMem modules:
− The DDR4 memory modules used with the PMem modules include RDIMMs and
LRDIMMs.
− The PMem modules used in a server must have the same P/N code.
− The DDR4 memory modules used with the PMem modules in a server must have
the same P/N code.
⚫ Observe the following when configuring PMem modules in MM mode:
On the same server, it is recommended that the ratio of the DDR4 memory capacity to
the PMem capacity be 1:4 to 1:16.
2022-11-11 50

A server supports a maximum of 16 PMem modules. The PMem modules must be used with
the DDR4 memory modules.
Figure 5-34 PMem module installation guidelines (1 processor)
2022-11-11 51
Figure 5-35 PMem module installation guidelines (2 processors)

⚫ PMem module Error Detection and Correction
⚫ PMem module Device Failure Recovery (SDDC)
⚫ PMem module Package Sparing (DDDC)
⚫ PMem module Patrol Scrubbing
⚫ PMem module Address Error Detection
⚫ PMem module Data Poisoning (Corrupt Data Containment)
⚫ PMem module Viral
⚫ PMem module Address Range Scrub (ARS)
⚫ PMem module Error Injection
⚫ DDR-T Command and Address Parity Check and Retry
⚫ DDR-T Read Write Data ECC Check and Retry
⚫ PMem module Faulty DIMM Isolation
⚫ PMem module Error Reporting
2022-11-11 52
5.1.5 Storage
5.1.5.1 Drive Configurations
5.1.5.1.1 8 x 2.5" Drive Pass-through Configuration
Drive configuration
Table 5-9 Drive configuration

Configuration Front Drive Rear Drive Built-in Drive Drive
Management
Mode
8 x 2.5" drive ⚫ Front drive: ⚫ I/O module - ⚫ SATA

pass-through 8 x 2.5" 3: 4 x 2.5" drive: PCH
configuration 1 − Slots 0 to − Slots 44 ⚫ NVMe
7 support to 47 drive: CPU
only support
SATA only
drives. NVMe
drivesa.
8 x 2.5" drive ⚫ Front drive: ⚫ I/O module - ⚫ SAS/SATA
pass-through 8 x 2.5" 3: 4 x 2.5" drive: 1 x
configuration 2 − Slots 0 to − Slots 44 screw-in
7 support to 47 RAID
only support controller
SAS/SAT only card
A drives. NVMe ⚫ NVMe
drivesa. drive: CPU
configuration 3 − Slots 0 to − Slots 44 PCIe RAID
7 support to 47 controller
only support card
SAS/SAT only ⚫ NVMe
A drives. NVMe drive: CPU
drivesa.
8 x 2.5" drive ⚫ Front drive: - - ⚫ PCH
pass-through + 8 x 2.5" passthrough
11 x PCIe card − Slots 0 to
configuration 1 7 support
only
SATA
drives.
8 x 2.5" drive ⚫ Front drive: - - ⚫ 1 x screw-in
pass-through + 8 x 2.5" RAID
11 x PCIe card − Slots 0 to controller
configuration 2 7 support card
2022-11-11 53

Management
Mode
only
SAS/SAT
A drives.
8 x 2.5" drive ⚫ Front drive: - - ⚫ 1 x PCIe
pass-through + 8 x 2.5" RAID
11 x PCIe card − Slots 0 to controller
configuration 3 7 support card
only
SAS/SAT
A drives.
8 x 2.5" drive + ⚫ Front drive: - - ⚫ PCH
4 x GPU 8 x 2.5" passthrough
configuration 1 − Slots 0 to
7 support
only
SATA
drives.
8 x 2.5" drive + ⚫ Front drive: - - ⚫ 1 x screw-in
4 x GPU 8 x 2.5" RAID
configuration 2 − Slots 0 to controller
7 support card
only
SAS/SAT
A drives.
8 x 2.5" drive ⚫ Front drive: - - ⚫ SAS/SATA
(4 x 8 x 2.5" drive: 1 x
SAS/SATA + 4 − Slots 0 to screw-in
x 3 support RAID
SAS/SATA/NV only controller
Me) + 4 x GPU SAS/SAT card
configuration 1 A drives. ⚫ NVMe
− Slots 4 to drive: CPU
7 support
SAS/SAT
A/NVMe
drivesa.
8 x 2.5" drive ⚫ Front drive: - - ⚫ 1 x PCIe
pass-through 8 x 2.5" RAID
backplane − Slots 0 to controller
(tri-mode) 1 support card
configuration 1 only
(2 x SAS/SAT
SAS/SATA + 2 A drives.
x
SAS/SATA/NV − Slots 2 to
Me + 4 x 3 support
2022-11-11 54

Management
Mode
NVMe) SAS/SAT
A/NVMe
drives.
− Slots 4 to
7 support
only
NVMe
drives.
⚫ a: The server with CPU 2 supports NVMe drives, but the server with a single CPU does
not support NVMe drives.
Slot numbers
⚫ Drive slot numbers of 8 x 2.5" drive pass-through configuration 1 in Table 5-9
Figure 5-36 Drive slot numbers
Table 5-10 Drive slot numbers
Drive No. Drive Number Identified by the iBMC
0 0
1 1
2 2
3 3
4 4
5 5
2022-11-11 55
6 6
7 7
44 44
45 45
46 46
47 47
⚫ Drive slot numbers of 8 x 2.5" drive pass-through configuration 2 and 8 x 2.5" drive
pass-through configuration 3 in Table 5-9
Drive No. Drive Number Identified Drive Number Identified

by the iBMC by the RAID Controller
Card
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
44 44 -
2022-11-11 56

Card
45 45 -
46 46 -
47 47 -
⚫ Drive slot numbers of 8 x 2.5" drive pass-through + 11 x PCIe card configuration 1, and
8 x 2.5" drive + 4 x GPU configuration 1 in Table 5-9
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
⚫ Drive slot numbers of 8 x 2.5" drive pass-through + 11 x PCIe card configuration 2, 8 x

2.5" drive pass-through + 11 x PCIe card configuration 3, 8 x 2.5" drive + 4 x GPU
configuration 2, and
8 x 2.5" drive (4 x SAS/SATA + 4 x SAS/SATA/NVMe) + 4 x GPU configuration 1 in
Table 5-9
2022-11-11 57

Card
0 0 0
1 1 1
2 2 2
3 3 3
4 4 4Note
5 5 5Note
6 6 6Note
7 7 7Note
Note: If the slot is configured with a SAS/SATA drive, the RAID controller card can
manage the drive and allocate a number to the drive.
⚫ Drive slot numbers of 8 x 2.5" drive pass-through backplane (tri-mode) configuration 1

(2 x SAS/SATA + 2 x SAS/SATA/NVMe + 4 x NVMe) in Table 5-9

Card
0 0 0
2022-11-11 58

Card
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
Drive configuration

Management
Mode
12 x 2.5" drive ⚫ Front drive: - - ⚫ SATA

pass-through 12 x 2.5" drive: PCH
configuration 1 − Slots 0 to ⚫ NVMe
(4 x SATA + 8 3 support drive: CPU
x NVMe) only
SATA
drives.
− Slots 4 to
11
support
only
NVMe
drives.a
pass-through 12 x 2.5" drive: 1 x
configuration 2 − Slots 0 to screw-in
(4 x 3 support RAID
SAS/SATA + 8 only controller
x NVMe) SAS/SAT card
A drives. ⚫ NVMe
11
support
only
2022-11-11 59

Management
Mode
NVMe
drives.a
pass-through 12 x 2.5" drive: 1 x
configuration 3 − Slots 0 to PCIe RAID
(4 x 3 support controller
SAS/SATA + 8 only card
x NVMe) SAS/SAT ⚫ NVMe
A drives. drive: CPU
− Slots 4 to
11
support
only
NVMe
drives.a
(4 x SATA + 8 12 x 2.5" drive: PCH
x NVMe) + 4 x − Slots 0 to ⚫ NVMe
GPU 3 support drive: CPU
configuration 1 only
SATA
drives.
− Slots 4 to
11
support
only
NVMe
drives.a
(4 x 12 x 2.5" drive: 1 x
SAS/SATA + 8 − Slots 0 to screw-in
x NVMe) + 4 x 3 support RAID
GPU only controller
configuration 2 SAS/SAT card
A drives. ⚫ NVMe
11
support
only
NVMe
drives.a
2022-11-11 60
Drive slot numbers

⚫ Drive slot numbers of 12 x 2.5" drive pass-through configuration 1 (4 x SATA + 8 x
NVMe) and 12 x 2.5" drive (4 x SATA + 8 x NVMe) + 4 x GPU configuration 1 in Table
5-15.

0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
⚫ Drive slot numbers of 12 x 2.5" drive pass-through configuration 2 (4 x SAS/SATA + 8 x

NVMe), and 12 x 2.5" drive pass-through configuration 3 (4 x SAS/SATA + 8 x NVMe),
and 12 x 2.5" drive (4 x SAS/SATA + 8 x NVMe) + 4 x GPU configuration 2 in Table
5-15.
2022-11-11 61

0 0 0
1 1 1
2 2 2
3 3 3
4 4 -
5 5 -
6 6 -
7 7 -
8 8 -
9 9 -
10 10 -
11 11 -
Drive configuration

Management
Mode

11 to 47 drive: CPU
support support
only only
SATA NVMe
2022-11-11 62

Management
Mode
drives. drivesa.
pass-through 12 x 3.5" 1: 2 x 2.5"/2 drive: 1 x
configuration 2 − Slots 0 to x 3.5" screw-in
11 − Slots 40 RAID
support and 41 controller
only support card
A drives. SAS/SAT drive: CPU
A drives.
⚫ I/O module
2: 2 x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
11 and 41 controller
support support card
only only ⚫ NVMe
SAS/SAT SAS/SAT drive: CPU
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
2022-11-11 63

Management
Mode
to 47
support
only
NVMe
drivesa.
11 and 43 RAID
support support controller
only only card
SAS/SAT SAS/SAT ⚫ NVMe
A drives. A drives. drive: CPU
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
(dual RAID 11 and 41 RAID
controller support support controller
cards) only only card + 1 x
SAS/SAT SAS/SAT PCIe RAID
A drives. A drives. controller
card
⚫ I/O module
3: 4 x 2.5" − One
screw-in
− Slots 44 RAID
to 47 controlle
support r card
only manages
NVMe the
drivesa. drives in
Slots 40
to 41.
− One
PCIe
RAID
controlle
r card
manages
the
drives in
2022-11-11 64

Management
Mode
Slots 0 to
11.
⚫ NVMe
drive: CPU
card
⚫ I/O module
3: 4 x 2.5" − One
screw-in
− Slots 44 RAID
to 47 controlle
support r card
only manages
NVMe the
drivesa. drives in
Slots 0 to
11.
− One
PCIe
RAID
controlle
r card
manages
the
drives in
Slots 42
to 43.
⚫ NVMe
drive: CPU
(4 x NVMe) 7 support to 47 drive: CPU
only support
SATA only
drives. NVMe
− Slots 8 to drivesa.
11
support
only
SATA/N
VMe
2022-11-11 65

Management
Mode
drives.
pass-through 12 x 3.5" 1: 2 x 2.5"/2 drive: 1 x
(4 x NVMe) 7 support − Slots 40 RAID
only and 41 controller
SAS/SAT support card
A drives. only ⚫ NVMe
− Slots 8 to SAS/SAT drive: CPU
11 A drives.
support ⚫ I/O module
SAS/SAT 2: 2 x 3.5"
A/NVMe − Slots 42
drives. and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
(4 x NVMe) 7 support and 41 controller
only support card
− Slots 8 to A drives.
11 ⚫ I/O module
support 2: 2 x 2.5"/2
SAS/SAT x 3.5"
A/NVMe − Slots 42
drives. and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
2022-11-11 66

Management
Mode
to 47
support
only
NVMe
drivesa.
Drive slot numbers

0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
2022-11-11 67
8 8
9 9
10 10
11 11
44 44
45 45
46 46
47 47
Figure 5-44 Drive slot numbers (3.5" drives in I/O module 1 and I/O module 2)
Figure 5-45 Drive slot numbers (2.5" drives in I/O module 1 and 3.5" drives in I/O module
2)
2022-11-11 68

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 69
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
2022-11-11 70

10 10 10
11 11 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
47 47 -

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
2022-11-11 71

6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
42 42 12
43 43 13
44 44 -
45 45 -
46 46 -
47 47 -
⚫ Drive slot numbers of 12 x 3.5" drive pass-through configuration 5 (dual RAID

controller cards) in Table 5-18

0 0 0
1 1 1
2 2 2
2022-11-11 72

3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 0
41 41 1
44 44 -
45 45 -
46 46 -
47 47 -


2022-11-11 73

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
42 42 0
43 43 1
44 44 -
45 45 -
46 46 -
47 47 -
⚫ Drive slot numbers of 12 x 3.5" drive pass-through configuration 1 (4 x NVMe) in Table

5-18
2022-11-11 74
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
44 44
45 45
46 46
47 47

5-18
2022-11-11 75
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8Note
9 9 9Note
10 10 10Note
11 11 11Note
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
2022-11-11 76

47 47 -

5-18
2)

0 0 0
1 1 1
2022-11-11 77

2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8Note
9 9 9Note
10 10 10Note
11 11 11Note
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
47 47 -
5.1.5.1.4 12 x 3.5" Drive EXP Configuration
Drive configuration

Management
Mode
12 x 3.5" drive ⚫ Front drive: ⚫ I/O module ⚫ Built-in ⚫ SAS/SATA

EXP 12 x 3.5" 1: 2 x 2.5"/2 drive: 4 x drive: 1 x
configuration 1 − Slots 0 to x 3.5" 3.5" screw-in
11 − Slots 40 − Slots 36 RAID
support and 41 to 39 controller
2022-11-11 78

Management
Mode
only support support card
SAS/SAT only only ⚫ NVMe
A drives. SAS/SAT SAS/SAT drive: CPU
A drives. A drives.
⚫ I/O module
2: 2 x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
EXP 12 x 3.5" 1: 2 x 2.5" drive: 4 x drive: 1 x
configuration 2 − Slots 0 to − Slots 40 3.5" PCIe RAID
11 and 41 − Slots 36 controller
support support to 39 card
only only support ⚫ NVMe
SAS/SAT SAS/SAT only drive: CPU
A drives. A drives. SAS/SAT
⚫ I/O module A drives.
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
EXP 1: 2 x 2.5"/2 drive: 1 x
2022-11-11 79

Management
Mode
configuration 3 12 x 3.5" x 3.5" screw-in
− Slots 0 to − Slots 40 RAID
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
EXP 12 x 3.5" 1: 2 x 2.5" drive: 1 x
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
2022-11-11 80

Management
Mode
NVMe
drivesa.
EXP 12 x 3.5" 1: 2 x 2.5" drive: 1 x
card
⚫ I/O module
3: 4 x 2.5" − One
screw-in
− Slots 44 RAID
to 47 controlle
support r card
only manages
NVMe the
drivesa. drives in
Slots 40
to 41.
− One
PCIe
RAID
controlle
r card
manages
the
drives in
Slots 0 to
11.
⚫ NVMe
drive: CPU
EXP 12 x 3.5" 1: 2 x 2.5" drive: 1 x
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
2022-11-11 81

Management
Mode
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
Drive slot numbers

⚫ Drive slot numbers of 12 x 3.5" drive EXP configuration 1 in Table 5-28
2022-11-11 82
2022-11-11 83
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 84

9 9 9
10 10 10
11 11 11
36 36 8
37 37 9
38 38 10
39 39 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 12Note
45 45 13Note
46 46 14Note
47 47 15Note
⚫ Note: If the slot is configured with a SAS/SATA drive, the RAID controller card can
⚫ If duplicate drive slot numbers are displayed on a RAID controller card, you are advised
to locate the drive based on the EID.
2022-11-11 85
2)
2022-11-11 86

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 87

9 9 9
10 10 10
11 11 11
36 36 8
37 37 9
38 38 10
39 39 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 12Note
45 45 13Note
46 46 14Note
47 47 15Note
2022-11-11 88
2)
2)

2022-11-11 89

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 90
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
2022-11-11 91

10 10 10
11 11 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
47 47 -
⚫ Drive slot numbers of 12 x 3.5" drive EXP configuration 5 (dual RAID controller cards)
in Table 5-28

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
2022-11-11 92

5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 0
41 41 1
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 93
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
42 42 14
43 43 15
44 44 -
45 45 -
46 46 -
2022-11-11 94

47 47 -
Drive configuration

Management
Mode

pass-through 20 x 2.5" drive: PCH
(4 x SATA + 16 3 support drive: CPU
x NVMe) only
SATA
drives.
− Slots 4 to
11 and
slots 16
to 23
support
only
NVMe
drives.
(4 x 3 support to 47 RAID
SAS/SATA + only support controller
16 x NVMe) SAS/SAT only card
A drives. SAS/SAT ⚫ NVMe
− Slots 4 to A drives. drive: CPU
11 and
slots 16
to 23
support
only
NVMe
drives.
(4 x 3 support to 47 controller
SAS/SATA +
2022-11-11 95

Management
Mode
16 x NVMe) only support card
11 and
slots 16
to 23
support
only
NVMe
drives.
Contact your local sales representative or see "Search Parts" in the Compatibility Checker
Drive slot numbers

⚫ Drive slot numbers of 20 x 2.5" drive pass-through configuration 1 (4 x SATA + 16 x
NVMe) in Table 5-35
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
2022-11-11 96
9 9
10 10
11 11
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23
⚫ Drive slot numbers of 20 x 2.5" drive pass-through configuration 2 (4 x SAS/SATA + 16

x NVMe) and 20 x 2.5" drive pass-through configuration 3 (4 x SAS/SATA + 16 x
NVMe) in Table 5-35.

0 0 0
1 1 1
2 2 2
2022-11-11 97

3 3 3
4 4 -
5 5 -
6 6 -
7 7 -
8 8 -
9 9 -
10 10 -
11 11 -
16 16 -
17 17 -
18 18 -
19 19 -
20 20 -
21 21 -
22 22 -
23 23 -
44 44 4
45 45 5
46 46 6
47 47 7
5.1.5.1.6 24 x 2.5" Drive Configuration
Drive configuration

Management
Mode

NVMe 24 x 2.5" drive: PCH
2022-11-11 98

Management
Mode
3 support drive: CPU
only
SATA/N
VMe
drives.
− Slots 4 to
23
support
only
NVMe
drives.
NVMe 24 x 2.5" 3: 4 x 2.5" drive: 1 x
SAS/SAT support controller
A/NVMe only card
drives. SAS/SAT ⚫ NVMe
23
support
only
NVMe
drives.
NVMe 24 x 2.5" drive: PCH
3 support drive: CPUa
only
SATA/N
VMe
drives.
− Slots 4 to
23
support
only
NVMe
drives.
NVMe 24 x 2.5" 3: 4 x 2.5" drive: 1 x
SAS/SAT support controller
A/NVMe only card
drives. SAS/SAT ⚫ NVMe
− Slots 4 to A drives. drive: CPUa
23
2022-11-11 99

Management
Mode
support
only
NVMe
drives.
NVMe 24 x 2.5" 3: 4 x 2.5" drive: 1 x
SAS/SAT support card
A/NVMe only ⚫ NVMe
drives. SAS/SAT drive: CPUa
23
support
only
NVMe
drives.
configuration − Slots 0 to − Slots 44 screw-in
(three RAID 23 to 47 RAID
SAS/SAT NVMe PCIe RAID
A drives. drives. controller
cardsb
− One
screw-in
RAID
controlle
r card
manages
drives in
Slots 0 to
7.
− One
PCIe
RAID
controlle
r card
manages
drives in
Slots 8 to
15.
− One
PCIe
RAID
controlle
2022-11-11 100

Management
Mode
r card
manages
drives in
Slots 16
to 23.
⚫ NVMe
drive: CPU
⚫ a: The PCIe4.0 x16 signals directly output by CPU1 and CPU2 are sent to PCIe switch
chip 1/PCIe switch chip 2 on the drive backplane, and the 12 PCIe 4.0 x4 signals output
by PCIe switch chip 1/PCIe switch chip 2 on the drive backplane are respectively sent
to the 12 NVMe drives (one signal to each drive).
⚫ b: The model of the screw-in RAID controller card must be the same as that of the PCIe
RAID controller card.
Drive slot numbers

⚫ Drive slot numbers of 24 x 2.5" NVMe configuration 1 in Table 5-38
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
2022-11-11 101
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
23 23

2022-11-11 102

0 0 0Note
1 1 1Note
2 2 2Note
3 3 3Note
4 4 -
5 5 -
6 6 -
7 7 -
8 8 -
9 9 -
10 10 -
11 11 -
12 12 -
13 13 -
14 14 -
15 15 -
16 16 -
17 17 -
18 18 -
19 19 -
20 20 -
21 21 -
22 22 -
23 23 -
44 44 4
45 45 5
46 46 6
47 47 7
2022-11-11 103
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
12 12
13 13
14 14
15 15
16 16
17 17
18 18
19 19
20 20
21 21
22 22
2022-11-11 104
23 23
44 44
45 45
46 46
47 47
⚫ Drive slot numbers of 24 x 2.5" NVMe configuration 4 and 24 x 2.5" NVMe

configuration 5 in Table 5-38

0 0 0Note
1 1 1Note
2 2 2Note
3 3 3Note
4 4 -
5 5 -
6 6 -
7 7 -
8 8 -
9 9 -
2022-11-11 105

10 10 -
11 11 -
12 12 -
13 13 -
14 14 -
15 15 -
16 16 -
17 17 -
18 18 -
19 19 -
20 20 -
21 21 -
22 22 -
23 23 -
44 44 4
45 45 5
46 46 6
47 47 7
⚫ Drive slot numbers of 24 x 2.5" drive pass-through configuration (three RAID controller
cards) in Table 5-38
2022-11-11 106

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 0
9 9 1
10 10 2
11 11 3
12 12 4
13 13 5
14 14 6
15 15 7
16 16 0
17 17 1
18 18 2
2022-11-11 107

19 19 3
20 20 4
21 21 5
22 22 6
23 23 7
44 44 -
45 45 -
46 46 -
47 47 -
5.1.5.1.7 25 x 2.5" Drive EXP Configuration
Drive configuration

Management
Mode

EXP 25 x 2.5" 1: 2 x 2.5"/2 drive: 1 x
only support card
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 2.5" drive: 1 x
2022-11-11 108

Management
Mode
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 2.5"/2 drive: 1 x
only support card
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 2.5" drive: 1 x
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
2022-11-11 109

Management
Mode
EXP 25 x 2.5" 1: 2 x 2.5" drive: 1 x
card
⚫ I/O module
3: 4 x 2.5" − One
screw-in
− Slots 44 RAID
to 47 controlle
support r card
only manages
NVMe the
drivesa. drives in
Slots 40
to 41.
− One
PCIe
RAID
controlle
r card
manages
the
drives in
Slots 0 to
24.
⚫ NVMe
drive: CPU
EXP 25 x 2.5" 1: 2 x 2.5" drive: 1 x
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
2022-11-11 110

Management
Mode
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 2.5" drive: 1 x
only only ⚫ NVMe
A drives. A drives.
⚫ I/O module
2: 2 x 2.5"/2
x 3.5"
− Slots 42
and 43
support
only
SAS/SAT
A drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
Drive slot numbers

2022-11-11 111
Figure 5-76 Drive slot numbers (2.5" drives in I/O module 1)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
2022-11-11 112

10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 113

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
2022-11-11 114

20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 115

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
2022-11-11 116

20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 8Note
45 45 9Note
46 46 10Note
47 47 11Note

0 0 0
2022-11-11 117

1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 8Note
45 45 9Note
46 46 10Note
47 47 11Note
2022-11-11 118

in Table 5-44

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
2022-11-11 119

12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 0
41 41 1
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 120
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 121

9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
42 42 27
43 43 28
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 122
2)

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 123

9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
42 42 27
43 43 28
44 44 8Note
45 45 9Note
46 46 10Note
47 47 11Note
2022-11-11 124
5.1.5.2 Drive Indicators
SAS/SATA Drive Indicators
Figure 5-87 SAS/SATA drive indicators
Table 5-52 SAS/SATA drive indicators

Activity Indicator Fault Indicator Description
(Green) (Yellow)
Off Off The drive is not in position.

Steady on Off The drive is detected.
Blinking at 4 Hz Off Data is being read or written properly, or
data on the primary drive is being rebuilt.
Steady on Blinking at 1 Hz The drive is being located.
Blinking at 1 Hz Blinking at 1 Hz Data on the secondary drive is being rebuilt.
Off Steady on A drive in a RAID array is removed.
Steady on Steady on The drive is faulty.
NVMe Drive Indicators
Figure 5-88 NVMe drive indicators
⚫ If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.
2022-11-11 125
Table 5-53 NVMe drive indicators (VMD enabled)

(Green) (Yellow)
Off Off The NVMe drive is not detected.

Steady on Off The NVMe drive is detected and operating
properly.
Blinking at 2 Hz Off Data is being read from or written to the
NVMe drive.
Off Blinking at 2 Hz The NVMe drive is being located.
Off Blinking at 8 Hz The data on the secondary NVMe drive is
being rebuilt.
Steady on/Off Steady on The NVMe drive is faulty.
⚫ If the VMD function is disabled, NVMe drives support only orderly hot swap.
Table 5-54 NVMe drive indicators (VMD disabled)

(Green) (Yellow)

properly.
NVMe drive.
Off Blinking at 2 Hz The NVMe drive is being located or
hot-swapped.
Off Blinking at 0.5 Hz The NVMe drive has completed the hot
swap process and is removable.
M.2 FRU Indicators

The server supports the Avago SAS3004iMR RAID controller card, which supports two M.2
FRUs.
2022-11-11 126
Figure 5-89 M.2 FRU indicators
Table 5-55 M.2 FRU indicators
M.2 FRU Active M.2 FRU Fault Description

Indicator (Green) Indicator (Yellow)
Off Off The M.2 FRU is not detected.

Steady on Off The M.2 FRU is inactive.
Blink Off The M.2 FRU is in the read/write or
synchronization state.
Steady on Blink The M.2 FRU is being located.
Blink Blink The RAID array is being rebuilt.
Off Steady on The M.2 FRU cannot be detected or
is faulty.
Steady on Steady on The M.2 FRU RAID status is
abnormal.
5.1.5.3 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and drive
roaming.
⚫ For details about the RAID controller card, see V6 Server RAID Controller Card User
Guide.
5.1.6 Network
5.1.6.1 OCP 3.0 Network Adapters
OCP 3.0 network adapters provide network expansion capabilities.
⚫ The FlexIO slot supports the OCP 3.0 network adapter, which can be configured as
required.
2022-11-11 127
⚫ For details about the OCP 3.0 network adapter, see the documents of each OCP 3.0
network adapter.
5.1.7 I/O Expansion

5.1.7.1 PCIe Cards
PCIe cards provide ease of expandability and connection.
⚫ The server with 11 standard PCIe cards on the rear panel supports up to 11 standard PCIe
4.0 expansion slots. Other server models support up to eight standard PCIe 4.0 expansion
slots.
⚫ The server with four GPU cards on the rear panel supports up to five standard PCIe 4.0
expansion slots (four FHFL dual-slot GPU cards and one FHHL standard PCIe 4.0 card).
⚫ When IB cards are used to build an IB network, ensure that the IPoIB modes of the IB
cards at both ends of the network are the same. For details, contact technical support.
5.1.7.2 PCIe Slots
PCIe Slots
Figure 5-90 PCIe slots
− I/O module 1 provides slots 1, 2, and 3. If a two-slot PCIe riser module is used, slot
1 is unavailable. If a module with 2 x 2.5" drives and one PCIe card is used, slots 1
and 2 are unavailable.
− I/O module 2 provides slots 4, 5, and 6. If a two-slot PCIe riser module is used, slot
4 is unavailable. If a module with 2 x 2.5" drives and one PCIe card is used, slots 4
and 5 are unavailable.
− I/O module 3 provides slots 7 and 8. If a one-slot PCIe riser module is used, slot 7
is unavailable.
Observe the following rules when configuring GPU cards:

⚫ When one to five x16 T4 GPU cards are configured:
⚫ I/O module 1 supports two HHHL PCIe x16 GPU cards.
⚫ I/O module 3 supports one HHHL PCIe x16 GPU card (in slot 8).
⚫ When six to eight T4 GPU cards (six x8 + two x16) are configured:
⚫ I/O module 1 supports two HHHL PCIe x8 and one HHHL x16 GPU cards.
2022-11-11 128
⚫ I/O module 2 supports two HHHL PCIe x8 and one HHHL x16 GPU cards.
⚫ Server with four GPU cards on the rear panel
− PCIe riser module 1 provides slots 2 and 3.

− PCIe riser module 3 provides slot 9.
⚫ Select this model when three or four FHFL dual-slot x16 GPU cards are required.
⚫ GPU cards are installed in slots 2, 3, 6, and 7 in sequence.
− PCIe riser module 1 provides slots 1, 2, 3, 4, 5 and 6.

− PCIe riser module 2 provides slots 7, 8, and 9.
PCIe Riser Modules (Applicable to the Server with a Drive Module or PCIe Riser
Module on the Rear Panel)
⚫ PCIe riser module 1 (universal)
− Provides PCIe slots 1, 2, and 3 when installed in I/O module 1.
− Provides PCIe slots 4, 5, and 6 when installed in I/O module 2.
2022-11-11 129
Figure 5-93 PCIe riser module 1
⚫ PCIe riser module 2 (for T4 GPU cards only)

− It provides PCIe slots 1, 2, and 3 when being installed in I/O module 1.
− It provides PCIe slots 4, 5, and 6 when being installed in I/O module 2.
2022-11-11 130
⚫ PCIe riser module 3 (universal)

− Provides PCIe slots 2 and 3 when installed in I/O module 1.
⚫ PCIe riser module 4 (for T4 GPU cards only)

2022-11-11 131
⚫ 2 x 2.5" drives + PCIe riser module

− Provides PCIe slot 3 when installed in I/O module 1.
2022-11-11 132
Figure 5-97 2 x 2.5" drives + PCIe riser module
⚫ PCIe riser module 6 (applicable to the 20 x 2.5" drive pass-through configuration)

⚫ PCIe riser module 7 (applicable to the 24 x 2.5" drive pass-through model 1/2)
Installed in I/O module 1 or 2.
2022-11-11 133
⚫ PCIe riser module 8

It provides PCIe slots 7 and 8 when being installed in I/O module 3.
2022-11-11 134
Provides PCIe slot 8 when installed in I/O module 3.
⚫ PCIe riser module 10 (applicable to full-height full-length single-slot riser cards)

2022-11-11 135
PCIe Riser Modules (Applicable to the Server with Four GPU Cards on the Rear
Panel)
⚫ PCIe riser module 1 or PCIe riser module 2
Figure 5-103 PCIe riser module of the GPU card

PCIe riser module 3 provides slot 9.
2022-11-11 136
Figure 5-104 PCIe riser module
⚫ Adapter board 1 between layer 1 and layer 2

Installed next to CPU 1 to provide slots for PCIe riser module 1 at the upper layer.
2022-11-11 137
Figure 5-105 Adapter board 1 between layer 1 and layer 2
⚫ Adapter board 2 between layer 1 and layer 2

Installed next to CPU 2 to provide slots for PCIe riser module 2 at the upper layer.
Figure 5-106 Adapter board 2 between layer 1 and layer 2
2022-11-11 138
PCIe Riser Modules (Applicable to the Server with 11 Standard PCIe cards on
the Rear Panel)
Provides PCIe slots 1, 2, 3, 4, 5, and 6 when installed in PCIe riser module 1.

Provides PCIe slots 7, 8, and 9 when installed in PCIe riser module 2.
2022-11-11 139

Provides PCIe slots 10, and 11 when installed in PCIe riser module 3.
2022-11-11 140
5.1.7.3 PCIe Slot Description
The PCIe slots mapping to a vacant CPU socket are unavailable.
Server with Drive Modules or PCIe Riser Modules on the Rear Panel
Table 5-56 PCIe slot description
PCIe CPU PCIe Conne Bus Port Root Device Slot

Slot Standa ctor Width No. Port (B/D/F Size
rds Width (B/D/F )
)
Screw-i CPU1 PCIe x8 x8 Port0A 16/02/0 17/00/0 -

n 4.0
RAID
controll
er card
FlexIO CPU1 PCIe x16 x8 Port0C 16/04/0 18/00/0 OCP
card 1 4.0 Expans 3.0
ion specific
cables ations
used by
the
mainbo
ard: x8
+ x8a
FlexIO CPU2 PCIe x16 x8 Port2A C9/02/ CA/00/ OCP
card 2 4.0 Expans 0 0 3.0
ion specific
cable ations
used by
the
mainbo
ard:
x16
Slot 1 CPU1 PCIe x16 ⚫ 3-sl Port1A 30/02/0 31/00/0 FHFL
4.0 ot
PCI
e
riser
mod
ule
(PR
M):
x16
⚫ 2-sl
ot
PR
M:
2022-11-11 141

rds Width (B/D/F )
)
N/A
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
N/A
Slot 2 CPU1 PCIe x16 ⚫ 3-sl Port2A 4A/02/ 4B/00/ FHFL
4.0 ot 0 0
PR
M:
x8
⚫ 2-sl
ot
PR
M:
x16
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
N/A
Slot 3 CPU1 PCIe x16 ⚫ 3-sl Port2C 4A/04/ 4C/00/ FHHL
4.0 ot 0 0
PR
M:
x8
⚫ 2-sl
ot
PR
2022-11-11 142

rds Width (B/D/F )
)
M:
x16
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
x16
Slot4 CPU2 PCIe x16 ⚫ 3-sl Port0A 97/02/0 98/00/0 FHFL
4.0 ot
PCI
e
riser
mod
ule
(PR
M):
x16
⚫ 2-sl
ot
PR
M:
N/A
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
N/A
Slot 5 CPU2 PCIe x16 ⚫ 3-sl Port1A B0/02/ B1/00/ FHFL
4.0 ot 0 0
PR
2022-11-11 143

rds Width (B/D/F )
)
M:
x8
⚫ 2-sl
ot
PR
M:
x16
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
N/A
Slot 6 CPU2 PCIe x16 ⚫ 3-sl Port1C B0/04/ B2/00/ FHHL
4.0 ot 0 0
PR
M:
x8
⚫ 2-sl
ot
PR
M:
x16
⚫ Mo
dule
with
2x
2.5"
driv
es
and
one
PCI
e
card
:
x16
Slot 7 CPU2 PCIe x16 ⚫ 2-sl Port3A E2/02/0 E3/00/0 FHHL
4.0 ot
2022-11-11 144

rds Width (B/D/F )
)
PR
M:
x8
⚫ 1-sl
ot
PR
M:
N/A
Slot 8 CPU2 PCIe x16 ⚫ 2-sl Port3C E2/04/0 E4/00/0 FHHL
4.0 ot
PR
M:
x8
⚫ 1-sl
ot
PR
M:
x16
⚫ a: When CPU1 and CPU2 use x8 signals, the socket-direct function is supported.
FlexIO cards 1 and 2 are not supported to expand the PCIe bandwidth at the same time.
⚫ The B/D/F (Bus/Device/Function Number) is the default value when the server is fully
configured with PCIe cards. The value may differ if the server is not fully configured
with PCIe cards or if a PCIe card with a PCI bridge is configured.
⚫ Root Port (B/D/F) indicates the B/D/F of an internal PCIe root port of the processor.
⚫ Device (B/D/F) indicates the B/D/F (bus address displayed on the OS) of an onboard or
extended PCIe device.
⚫ The PCIe x16 slots are compatible with PCIe x16, PCIe x8, PCIe x4, and PCIe x1 cards.
The PCIe cards are not forward compatible. That is, the PCIe slot width cannot be
smaller than the PCIe card link width.
⚫ The full-height full-length (FHFL) PCIe slots are compatible with FHFL PCIe cards,
full-height half-length (FHHL) PCIe cards, and half-height half-length (HHHL) PCIe
cards.
⚫ The full-height half-length (FHHL) PCIe slots are compatible with FHHL PCIe cards
and half-height half-length (HHHL) PCIe cards.
⚫ The maximum power supply of each PCIe slot is 75 W.
2022-11-11 145
Server with Four GPU Cards on the Rear Panel

rds Width (B/D/F )
)

n 4.0
RAID
controll
er card
ion specific
cables ations
used by
the
mainbo
ard: x8
+ x8
ion specific
cable ations
used by
the
mainbo
ard:
x16
Slot2 CPU1 PCIe x16 x16 Port1A 30/02/0 31/00/0 FHFL
4.0
Slot 3 CPU1 PCIe x16 x16 Port2A 4A/02/ 4B/00/ FHFL
4.0 0 0
Slot 6 CPU2 PCIe x16 x16 Port0A 97/02/0 98/00/0 FHFL
4.0
Slot7 CPU2 PCIe x16 x16 Port1A B0/02/ B1/00/ FHFL
4.0 0 0
Slot9 CPU1 PCIe x16 x16 Port3A 64/02/0 65/00/0 HHHL
4.0
2022-11-11 146

rds Width (B/D/F )
)
⚫ The full-height full-length (FHFL) PCIe slots are compatible with FHFL PCIe cards,
full-height half-length (FHHL) PCIe cards, and half-height half-length (HHHL) PCIe
cards.
⚫ FlexIO cards 1 and 2 are not supported to expand the PCIe bandwidth at the same time.
Server with Eleven Standard PCIe Cards on the Rear Panel

rds Width (B/D/F )
)

n 3.0
RAID
controll
er card
ion specific
cables ations
used by
the
mainbo
ard: x8
+ x8
ion specific
cable ations
used by
the
mainbo
ard:
x16
Slot 1 CPU1 PCIe x16 x8 Port1A 30/02/0 31/00/0 FHHL
4.0
2022-11-11 147

rds Width (B/D/F )
)
Slot2 CPU1 PCIe x16 x8 Port1C 30/04/0 32/00/0 FHHL

4.0
Slot3 CPU1 PCIe x16 x8 Port2A 4A/02/ 4B/00/ FHHL
4.0 0 0
Slot4 CPU1 PCIe x16 x8 Port2C 4A/04/ 4C/00/ HHHL
4.0 0 0
4.0
Slot6 CPU1 PCIe x16 x8 Port3C 64/04/0 66/00/0 HHHL
4.0
4.0
Slot8 CPU2 PCIe x16 x8 Port1A B0/02/ B1/00/ HHHL
4.0 0 0
Slot9 CPU2 PCIe x16 x8 Port1C B0/04/ B2/00/ HHHL
4.0 0 0
Slot10 CPU2 PCIe x16 x8 Port3A E2/02/0 E3/00/0 FHHL
4.0
Slot11 CPU2 PCIe x16 x8 Port3C E2/04/0 E4/00/0 FHHL
4.0
⚫ FlexIO cards 1 and 2 are not supported to expand the PCIe bandwidth at the same time.
5.1.8 PSUs
⚫ The server supports one or two PSUs.
⚫ The server supports AC or DC PSUs.
2022-11-11 148
⚫ The PSUs are hot-swappable.

⚫ The server supports two PSUs in 1+1 redundancy.
⚫ PSUs of the same P/N code must be used in a server.
⚫ The PSUs are protected against short circuit. Double-pole fuse is provided for the PSUs
with dual input live wires.
⚫ If the DC power supply is used, purchase the DC power supply that meets the
requirements of the safety standards or the DC power supply that has passed the CCC
certification.
Figure 5-110 PSU positions
5.1.9 Fan Modules

⚫ The server supports four fan modules.
⚫ The fan modules are hot-swappable.
⚫ N+1 redundancy is supported. That is, the server can work properly when a single fan
fails.
⚫ The fan speed can be adjusted.
⚫ Fan modules of the same P/N code must be used in a server.
2022-11-11 149
Figure 5-111 Positions of fan modules
5.1.10 LCD
Only the 8 x 2.5" drive pass-through configuration supports the LCD.
Function
The LCD displays the installation status and running status of server components and enables
users to set the IP address of the iBMC management network port on the server.
The LCD and the server iBMC form an LCD subsystem. The LCD directly obtains device
information from the iBMC. The LCD subsystem does not store device data.
2022-11-11 150
Figure 5-112 LCD subsystem working principle
UI
Figure 5-113 LCD main interface
Table 5-59 Parameters on the LCD home screen
Tab Function
Status Displays the port 80 status, serial number, component status,

and component alarms of the server.
Monitor Displays the current power, CPU temperature, and inlet
2022-11-11 151
Tab Function
temperature of the server.
Info. Displays the IP address and MAC address of the iBMC
management network port, device SNs, asset information, and
firmware version.
Setting Sets the IP address of the iBMC management network port.
For details about how to use the LCD module, see FusionServer Rack Server LCD User
Guide.
2022-11-11 152
5.1.11 Boards
5.1.11.1 Mainboard
Figure 5-114 2288H V6-32DIMM mainboard
1 PCIe riser 2 slot (PCIE 2 Debugging pin (J103)

RISER2/J51)
3 Rear-drive backplane & BBU 4 Screw-in RAID controller
low-speed signal connector card connector (RAID
(BACK HDD BP&BBU CARD/J86)
SIGNAL/J90)
5 LP slimline 7 connector for 6 OCP 3.0 network adapter 2
OCP 3.0 network adapter 2 connector (OCP2
2022-11-11 153
(SLIMLINE7/J31) CONN/J109)
7 Built-in storage expansion 8 2 x USB 3.0 ports (USB3.0
port (SD CARD/J87) CONN/J88)
9 Rear VGA port (VGA 10 Serial port (COM/J6020)
CONN/J60)
11 BMC management network 12 BMC management board
port (BMC_GE /J6019)
13 LCD connector (LCD 14 OCP 3.0 network adapter 1
CONN/J6025) connector (OCP1
CONN/J108)
15 Rear-drive backplane power 16 NC-SI connector (NCSI
connector 2 (REAR BP CONN/J114)
PWR2/J21)
17 LP slimline 6 connector for 18 PCIe riser 1 slot (PCIE
OCP 3.0 network adapter 1 RISER1/J50)
(SLIMLINE6/J13)
19 TPM/TCM connector (J10) 20 mini-SAS HD connector C
(MINIHD PORTC/J4)
21 Drive backplane power 22 Built-in USB 3.0 connector
connector 3 (HDD BP (INNER USB3.0/J110)
PWR3/J89)
23 Right mounting ear connector 24 mini-SAS HD connector B
(RCIA BOARD/J113) (MINIHD PORTB/J5)
25 Rear-drive backplane power 26 mini-SAS HD connector A
connector 1 (REAR BP (MINIHD PORTA/J6)
PWR1/J64)
27 SATA connector 1 28 SATA connector 2
(SATA1/J1) (SATA2/J2)
29 Cell battery holder (U9) 30 VROC key connector (Soft
RAID KEY/J3)
31 LP slimline 1 connector 32 LP slimline 2 connector
(SLIMLNE1/J11) (SLIMLNE2/J84)
33 Fan module 4 connector 34 Fan module 4 connector (2U
(J100) FAN4/J98)
35 Fan module 3 connector (J97) 36 Fan module 3 connector (2U
FAN3/J95)
37 Intrusion sensor connector 38 Fan module 2 connector (J93)
(INTRUDER CONN/S1)
39 Low-speed signal connector 40 Fan module 2 connector (2U
for the front-drive backplane FAN2/J91)
(FRONT HDD BP/J75)
41 Fan module 1 connector 42 Fan module 1 connector (2U
2022-11-11 154
(J102) FAN1/J67)
43 Left mounting ear connector 44 LP slimline 4 connector
(LCIA BOARD/J106) (SLIMLINE4/J12)
45 LP slimline 3 connector 46 Power connector for the
(SLIMLINE3/J85) built-in-drive backplane
(INNER HDD PWR/J22)
47 Drive backplane power 48 BBU power connector (BBU
connector 2 (HDD BP POWER/J13001)
PWR2/J88)
49 Drive backplane power 50 Rear-drive backplane power
connector 1 (HDD BP connector 3 (REAR BP
PWR1/J26) PWR3/J20)
51 PSU 2 connector (PSU2/J56) 52 LP slimline 5 connector
(SLIMLINE5/J30)
53 Low-speed signal connector 54 Low-speed signal connector
for the built-in-drive for the rear 4 x 2.5" drive
backplane (INNER HDD backplane (REAR 4x2.5
BP/J27) HDD BP/J57)
55 PSU 1 connector (PSU1/J28) - -
⚫ Use connectors 34, 36, 40, and 42 when the 8038+ fan modules are configured.
⚫ Use connectors 33, 34, 35, 36, 38, 40, 41, and 42 when the 8080 fan modules are
configured.
5.1.11.2 Drive Backplane
Front Drive Backplane

⚫ 8 x 2.5" drive pass-through backplane
This backplane is supported by 8 x 2.5" drive pass-through configuration 1, 8 x 2.5"
drive pass-through configuration 2, 8 x 2.5" drive pass-through configuration 3, 8 x 2.5"
drive pass-through + 11 x PCIe card configuration 1, 8 x 2.5" drive pass-through + 11 x
PCIe card configuration 2, 8 x 2.5" drive pass-through + 11 x PCIe card configuration 3,
8 x 2.5" drive + 4 x GPU configuration 1, and 8 x 2.5" drive + 4 x GPU configuration 2
in 5.1.5.1.1 8 x 2.5" Drive Pass-through Configuration.
2022-11-11 155
Figure 5-115 8 x 2.5" drive pass-through backplane
1 Indicator signal cable 2 DVD drive power connector

connector (REAR BP1/J3)a (DVD/J11)
3 Backplane signal cable 4 Power connector
connector (HDD BP/J1) (POWER/J2)
5 Mini-SAS HD connector 6 Mini-SAS HD connector
(PORT A/J28) (PORT B/J29)
a: Reserved and unavailable currently.
⚫ 8 x 2.5" drive tri-mode backplane

This backplane is supported by 8 x 2.5" drive pass-through backplane (tri-mode)
configuration 1 (2 x SAS/SATA + 2 x SAS/SATA/NVMe + 4 x NVMe) in 5.1.5.1.1 8 x
2.5" Drive Pass-through Configuration.
2022-11-11 156
Figure 5-116 8 x 2.5" drive tri-mode backplane
1 Cascade backplane low-speed 2 SlimSAS connector

connector (2B-NV/J404)
(BP2_CONN/J1102)
3 SlimSAS connector 4 SlimSAS connector
(2A-NV/J403) (1B-NV/J402)
5 SlimSAS connector 6 Backplane signal cable
(1A-NV/J401) connector (HDD_BP/J1103)
7 SlimSAS connector 8 Power connector
(1A-SS/J501) (POWER/J1801)
9 SlimSAS connector - -
(1B-SS/J502)
⚫ 12 x 2.5" drive pass-through (4 x SAS/SATA + 8 x NVMe) backplane

This backplane is supported by 12 x 2.5" drive pass-through configuration 1 (4 x SATA +
8 x NVMe), 12 x 2.5" drive pass-through configuration 2 (4 x SAS/SATA + 8 x NVMe),
and 12 x 2.5" drive pass-through configuration 3 (4 x SAS/SATA + 8 x NVMe), 12 x
2.5" drive (4 x SATA + 8 x NVMe) + 4 x GPU configuration 1, and 12 x 2.5" drive (4 x
SAS/SATA + 8 x NVMe) + 4 x GPU configuration 2 in 5.1.5.1.2 12 x 2.5" Drive
Pass-through Configuration.
2022-11-11 157
Figure 5-117 12 x 2.5" drive pass-through (4 x SAS/SATA + 8 x NVMe) backplane

(SLIM_2/J1001) (SLIM_1/J901)
(SLIM_4/J1201) (SLIM_3/J1101)
5 Mini-SAS HD connector 6 Backplane power connector
(PORT A/J801) (HDD POWER/J4003)
7 Backplane signal cable - -
connector (HDD_BP/J3702)
⚫ 12 x 2.5" drive pass-through (4 x SAS + 4 x SAS/SATA/NVMe + 4 x NVMe) backplane

This backplane is supported by 8 x 2.5" drive (4 x SAS/SATA + 4 x SAS/SATA/NVMe)
+ 4 x GPU configuration 1 in 5.1.5.1.1 8 x 2.5" Drive Pass-through Configuration.
Figure 5-118 12 x 2.5" drive pass-through (4 x SAS + 4 x SAS/SATA/NVMe + 4 x NVMe)

backplane

(SLIM_2/J1001) (SLIM_1/J901)
2022-11-11 158

(SLIM_4/J1201) (SLIM_3/J1101)
5 Backplane power connector 6 Backplane signal cable
(HDD POWER/J4003) connector (HDD_BP/J3702)

This backplane is supported by 12 x 3.5" drive pass-through configuration 1, 12 x 3.5"
drive pass-through configuration 2, 12 x 3.5" drive pass-through configuration 3, 12 x
3.5" drive pass-through configuration 4, 12 x 3.5" drive pass-through configuration 5
(dual RAID controller cards), and 12 x 3.5" drive pass-through configuration 6 (dual
RAID controller cards) in 5.1.5.1.3 12 x 3.5" Drive Pass-through Configuration.
1 Indicator signal cable 2 Mini-SAS HD connector

connector (REAR BP0/J7) (PORT C/J5)
3 Mini-SAS HD connector 4 Backplane signal cable
(PORT B/J4) connector (HDD BP/J6)
5 Mini-SAS HD connector 6 Indicator signal cable
(PORT A/J3) connector (REAR BP1/J8)
7 Power connector - -
(POWER/J1)
⚫ 12 x 3.5" drive NVMe backplane (4 x NVMe)

This backplane is supported by 12 x 3.5" drive pass-through configuration 1 (4 x NVMe),
12 x 3.5" drive pass-through configuration 2 (4 x NVMe), and 12 x 3.5" drive
pass-through configuration 3 (4 x NVMe) in 5.1.5.1.3 12 x 3.5" Drive Pass-through
Configuration.
2022-11-11 159
Figure 5-120 12 x 3.5" drive NVMe backplane (4 x NVMe)

(PORT B/J29) (PORT A/J28)
5 Backplane signal cable 6 Indicator signal cable
connector (HDD_BP/J1) connector (REAR BP1/J31)
7 Backplane power connector 8 LP slimline 1 connector
(HDD_BP/J24) (SLIMLINE 1/J4)
9 LP slimline 2 connector - -
(SLIMLINE 2/J37)
⚫ 12 x 3.5" drive EXP backplane 1 (P/N code: 03027FAT)

This backplane is supported by 12 x 3.5" drive EXP configuration 1, 12 x 3.5" drive EXP
configuration 2, 12 x 3.5" drive EXP configuration 3, 12 x 3.5" drive EXP configuration
4, and 12 x 3.5" drive EXP configuration 5 (dual RAID controller card) in 5.1.5.1.4 12 x
3.5" Drive EXP Configuration.
Figure 5-121 12 x 3.5" drive EXP backplane 1

connector (REAR BP0/J31) (PORT A/J28)
(PORT B/J29) (REAR PORT/J34)
2022-11-11 160

7 Indicator signal cable - -
connector (REAR BP1/J32)
⚫ 12 x 3.5" drive EXP backplane 2 (P/N code: 0302Y255)



This backplane is supported by 12 x 3.5" drive EXP configuration 6 in 5.1.5.1.4 12 x
2022-11-11 161
connector (REAR BP0/J31) (REAR PORT/J34)

⚫ 24 x 2.5" NVMe backplane

This backplane is supported by all drive configurations in 5.1.5.1.5 20 x 2.5" Drive
Pass-through Configuration and 24 x 2.5" drive NVMe configuration 1 and 24 x 2.5"
drive NVMe configuration 2 in 5.1.5.1.6 24 x 2.5" Drive Configuration.
Figure 5-124 24 x 2.5" NVMe backplane
1 LP slimline 1D connector 2 LP slimline 1C connector

(SLIMLINE 1D/J1801) (SLIMLINE 1C/J1701)
3 LP slimline 1A connector 4 LP slimline 1B connector
(SLIMLINE 1A/J1601) (SLIMLINE 1B/J1501)
5 LP slimline 2D connector 6 LP slimline 2C connector
(SLIMLINE 2D/J2201) (SLIMLINE 2C/J2101)
7 LP slimline 2B connector 8 LP slimline 2A connector
(SLIMLINE 2B/J2001) (SLIMLINE 2A/J1901)
9 Backplane signal cable 10 Power connector 1 (HDD
connector (HDD BP/J7102) POWER1/J30)
11 Power connector 2 (HDD 12 Mini-SAS HD connector
POWER2/J7303) (PORT A/J1001)
(SLIMLINE 3/J1301) (SLIMLINE 4/J1401)
2022-11-11 162
⚫ 24 x 2.5" NVMe switch backplane

This backplane is supported by 24 x 2.5" drive NVMe configuration 3, 24 x 2.5" drive
NVMe configuration 4, and 24 x 2.5" drive NVMe configuration 5 in 5.1.5.1.6 24 x 2.5"
Drive Configuration.
Figure 5-125 24 x 2.5" NVMe switch backplane

5 Backplane signal cable 6 Power connector 2 (HDD
connector (HDD BP/J3) POWER2/J2)
7 Mini-SAS HD connector 8 Power connector 1 (HDD
(PORT A/J52) POWER1/J34)

This backplane is supported by 24 x 2.5" drive pass-through configuration (3 x RAID
controller card) in 5.1.5.1.6 24 x 2.5" Drive Configuration.
2022-11-11 163

(PORT 3B/J33) (PORT 3A/J39)
7 Power connector 8 Backplane signal cable
(POWER/J24) connector (HDD_BP/J1)
⚫ 25 x 2.5" drive EXP backplane (P/N code: 03027QFN and 0302Y073)

All drive configurations in 5.1.5.1.7 25 x 2.5" Drive EXP Configuration support this
backplane.
Figure 5-127 25 x 2.5" drive EXP backplane

connector (HDD_BP/J1) (POWER/J24)
Built-in-Drive Backplane
⚫ 4 x 3.5" drive backplane
2022-11-11 164
Figure 5-128 4 x 3.5" drive backplane

(PORT A/J3) connector (INNER HDD
BP/J1)
3 Backplane power connector - -
(INNER HDD PWR/J2)
Rear-drive backplane
1 Power connector (BP 2 Indicator signal cable

PWR/J1) connector (REAR BP/J5)
3 Mini-SAS HD connector - -
(REAR PORT/J2)
2022-11-11 165

connector (REAR BP/J5) (REAR PORT/J2)
3 Power connector (BP - -
PWR/J1)
1 LP slimline 4 connector 2 Power connector

(SLIM_4/J1001) (POWR/J2502)
3 LP slimline 3 connector 4 Backplane signal cable
(SLIM_3/J901) connector (HDD BP/J2302)
5 Mini-SAS HD connector - -
(Port A/J801)
2022-11-11 166
5.2 2288H V6-16DIMM

5.2.1 Front Panel
5.2.1.1 Appearance
Server with 8 x 2.5" drives has two types of front panels. The front panels appearance Figure 5-132 of
the chassis delivered on or before June 30, 2022 is shown in Figure 1. The front panels appearance
Figure 5-133 of the chassis delivered after June 30, 2022 is shown in Figure 2.
Figure 5-132 Front view 1
Figure 5-133 Front view 2

SN label)
3 (Optional) Built-in DVD - -
drive (or LCD module)
2022-11-11 167

SN label)

SN label)

SN label)
2022-11-11 168
Indicator and Button Positions

Server with 8 x 2.5" drives has two types of front panels. The indicators and buttons on the front panels
Figure 5-137 of the chassis delivered on or before June 30, 2022 are shown in Figure 1. The indicators
and buttons on the front panels Figure 5-138 of the chassis delivered after June 30, 2022 are shown in
Figure 2.
Figure 5-137 Indicators and buttons on the front panel 1
Figure 5-138 Indicators and buttons on the front panel 2
1 Fault Diagnosis LED 2 Power Button/Indicator

5 FlexIO card presence - -
indicator
2022-11-11 169

indicator

indicator

indicator
2022-11-11 170
Indicator and Button Descriptions
Table 5-60 Description of indicators and buttons on the front panel

[Azure] Indicator/Butt Description
Available on
Fault Diagnosis ⚫ ---: The device is operating properly.

LED ⚫ Error code: A component is faulty.
For details about error codes, see the
FusionServer Rack Server iBMC Alarm Handling.
Power Power indicator:
Button/Indicato ⚫ Off: The device is not powered on.
r
⚫ Steady green: The device is powered on.
⚫ Blinking yellow: The iBMC is starting. The power
button is locked and cannot be pressed. The iBMC
is started in about 1 minute, and then the power
indicator is steady yellow.
⚫ Steady yellow: The device is standby.
Power button:
⚫ When the device is powered on, you can press this
button to gracefully shut down the OS.
NOTE
For different OSs, you may need to shut down the OS as
prompted.
⚫ When the device is powered on, you can hold
down this button for 6 seconds to forcibly power
off the device.
⚫ When the power indicator is steady yellow, you
can press this button to power on the device.
Health status ⚫ Off: The device is powered off or is faulty.
indicator ⚫ Blinking red at 1 Hz: A major alarm has been
⚫ Blinking red at 5 Hz: A critical alarm has been
⚫ Steady green: The device is operating properly.
UID The UID button/indicator helps identify and locate a
Button/Indicato device.
r UID indicator:
⚫ Blinking or steady blue: The device is being
located.
UID button:
⚫ You can control the UID indicator status by
⚫ You can press this button to turn on or off the
2022-11-11 171
[Azure] Indicator/Butt Description

Available on
UID indicator.
⚫ You can press and hold down this button for 4 to
6 seconds to reset the iBMC.
FlexIO card ⚫ Off: The FlexIO card is not detected.
presence ⚫ Blinking green at 0.5 Hz: The FlexIO card is
indicator detected but is not powered on.
⚫ Blinking green at 2 Hz: The FlexIO card is
detected and has just been inserted.
⚫ Steady green: The FlexIO card is detected and the
power supply is normal.
5.2.2 Rear Panel

5.2.2.1 Appearance
1 I/O module 1 2 PCIe Slot1

3 PCIe Slot2 4 PCIe Slot3
5 PCIe Slot4 6 I/O module 3
7 PSU 2 8 PSU 1
9 FlexIO card - -
NOTE
OCP 3.0 network adapters.
⚫ I/O module 1 supports only the 2 x 3.5" rear-drive module.
2022-11-11 172
⚫ I/O module 3 supports a PCIe riser module or 4 x 2.5" rear-drive module.

⚫ For details about the OCP 3.0 network adapter, see 5.2.6.1 OCP 3.0 Network Adapters.
Indicator Positions

network port
3 PSU indicator 4 UID indicator
5 Serial port indicator - -
NOTE
currently.
Indicator Description
Table 5-61 Description of indicators on the rear panel

Identifier Indicator State Description
- Data transmission ⚫ Off: No data is being transmitted.

status indicator of ⚫ Blinking yellow: Data is being
the management transmitted.
network port
- Connection status ⚫ Off: The network port is not connected.
indicator of the ⚫ Steady green: The network port is
management connected properly.
network port
UID indicator The UID indicator helps identify and locate
a device.
2022-11-11 173
Identifier Indicator State Description

⚫ Blinking or steady blue: The device is
being located.
NOTE
You can control the UID indicator status by
- PSU indicator ⚫ Off: No power is supplied.

⚫ Blinking green at 1 Hz:
− The input is normal, and the server is
standby.
− The input is overvoltage or
undervoltage.
− The PSU is in deep hibernation
mode.
⚫ Blinking green at 4 Hz: The firmware is
being upgraded online.
⚫ Steady green: The power input and
output are normal.
⚫ Steady orange: The input is normal but
there is no output.
NOTE
The possible causes of no power output are as
follows:
⚫ Power supply overtemperature protection
⚫ Power output overcurrent or short-circuit
⚫ Output overvoltage
⚫ Short-circuit protection
⚫ Device failure (excluding failure of all
devices)
5.2.2.3 Interface
Port Positions
2022-11-11 174

Port Description
Table 5-62 Ports on the rear panel

VGA port DB15 1 Used to connect a display

KVM.
device.
NOTICE
⚫ The maximum current is 1.3 A for
an external USB device.
impact the server.
Management RJ45 1 iBMC management network port,

network port which is used to manage the
server.
NOTE
The management network port is a
GE port that supports 100 Mbit/s and
1000 Mbit/s auto-negotiation.
Serial port RJ45 1 Default operating system serial

port used for debugging. You can
also set it as the iBMC serial port
by using the iBMC command.
NOTE
The port uses 3-wire serial
communication interface, and the
default baud rate is 115,200 bit/s.
PSU socket - 2 Used to connect to a power

distribution unit (PDU) through a
power cable. You can select the
2022-11-11 175

PSUs as required.
NOTE
When determining the PSUs, ensure
that the rated power of the PSUs is
greater than that of the server.
5.2.3 Processor
⚫ The server supports one or two processors.
⚫ If only one processor is required, install it in socket CPU1.
⚫ Processors of the same model must be used in a server.
Figure 5-145 Positions of processors
2022-11-11 176
5.2.4 Memory
5.2.4.1 DDR4 Memory
5.2.4.1.1 Memory ID
You can determine the memory module properties based on the label attached to the memory
module.
1 Capacity ⚫ 16 GB
⚫ 32 GB
⚫ 64 GB
⚫ 128 GB
2 rank(s) ⚫ 1R = Single rank
⚫ 2R = Dual rank
⚫ 4R = Quad rank
⚫ 8R = Octal rank
3 Data width on the DRAM ⚫ x4: 4-bit
⚫ x8: 8-bit
4 Type of the memory interface ⚫ PC4 = DDR4
5 Maximum memory speed ⚫ 2933 MT/S
⚫ 3200 MT/S
6 Column Access Strobe (CAS) ⚫ W=CAS 20-20-20
latency ⚫ Y=CAS 21-21-21
⚫ AA=CAS 22-22-22
7 DIMM type ⚫ R = RDIMM
⚫ L = LRDIMM
2022-11-11 177

A server provides 16 memory slots. Each processor integrates eight memory channels.
Table 5-63 Channels
CPU 1 A DIMM000(A)
B DIMM010(B)
C DIMM020(C)
D DIMM030(D)
E DIMM040(E)
F DIMM050(F)
G DIMM060(G)
H DIMM070(H)
CPU 2 A DIMM100(A)
B DIMM110(B)
C DIMM120(C)
D DIMM130(D)
E DIMM140(E)
F DIMM150(F)
G DIMM160(G)
H DIMM170(H)

Observe the following rules when configuring DDR4 memory modules:
2022-11-11 178
⚫ A server must use DDR4 memory modules of the same part number (P/N code), and the
memory speed is the minimum value of the following items:
⚫ Memory speed supported by a CPU
⚫ Maximum operating speed of a memory module
⚫ The DDR4 DIMMs of different types (RDIMM and LRDIMM) and specifications
(capacity, bit width, rank, and height) cannot be used together.
⚫ The memory can be used with the third-generation Intel® Xeon® Scalable Ice Lake
same.
⚫ The total memory capacity is the sum of the capacity of all DDR4 memory modules.
rank quantity.
Table 5-64 DDR4 memory specifications
Capacity per DDR4 memory 16 32 64 128

module (GB)
Type RDIMM RDIMM RDIMM LRDIMM
Rated speed (MT/s) 3200 3200 3200 3200
Operating voltage (V) 1.2 1.2 1.2 1.2
Maximum number of DDR4 16 16 16 16
DIMMs in a servera
Maximum DDR4 memory 256 512 1024 2048
capacity of the server (GB)
Actual rate 1DPCb 3200 3200 3200 3200
(MT/s)
⚫ a: The maximum number of DDR4 memory modules is based on dual-processor
configuration. The value is halved for a server with only one processor.
⚫ b: DPC (DIMM per channel) indicates the number of memory modules per channel.
2022-11-11 179

Observe the following when configuring DDR4 memory modules:
⚫ Install memory modules only when corresponding processors are installed.
⚫ Do not install LRDIMMs and RDIMMs in the same server.
⚫ Install filler memory modules in vacant slots.
Observe the following when configuring DDR4 memory modules in specific operating mode:
⚫ Memory sparing mode
− Each memory channel must have a valid online spare configuration.
− The channels can have different online spare configurations.
− Each populated channel must have a spare rank.
⚫ Memory mirroring mode
− Each processor supports four integrated memory controllers (IMCs), and each IMC
has two channels for installing memory modules. The installed memory modules
must be identical in size and organization.
− For a multi-processor configuration, each processor must have a valid memory
mirroring configuration.
⚫ Memory scrubbing mode

A server supports a maximum of 16 DDR4 memory modules. To maximize performance,
balance the total memory capacity between the installed processors and to load the channels
similarly whenever possible.
At least one DDR4 memory module must be installed in the primary memory channels
corresponding to CPU 1.
2022-11-11 180
Figure 5-148 DDR4 memory module installation guidelines (1 processor)
2022-11-11 181
Figure 5-149 DDR4 memory module installation guidelines (2 processors)

⚫ ECC
⚫ Memory Mirroring
⚫ Memory Single Device Data Correction (SDDC)
⚫ Failed DIMM Isolation
⚫ Memory Thermal Throttling
⚫ Command/Address Parity Check and Retry
⚫ Memory Demand/Patrol Scrubbing
⚫ Memory Data Scrambling
⚫ Post Package Repair (PPR)
⚫ Write Data CRC Protection
⚫ Adaptive Data Correction - Single Region (ADC-SR)
⚫ Adaptive Double Device Data Correction - Multiple Region (ADDDC-MR)
⚫ Partial Cache Line Sparing (PCLS)
2022-11-11 182
5.2.5 Storage
5.2.5.1 Drive Configurations
5.2.5.1.1 8 x 2.5" drive pass-through configuration
Drive configuration

Management
Mode

7 support to 47 drive: CPU
only support
SATA only
drives. NVMe
drivesa.
SAS/SAT only card
drivesa. drive: CPU
only support card
SAS/SAT only The PCIe
A drives. NVMe RAID
drivesa. controller
card must be
installed in
slot 1.
⚫ NVMe
drive: CPU
2022-11-11 183
Slot numbers
Figure 5-150 Slot numbers
Table 5-66 Slot numbers

0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
44 44
45 45
46 46
47 47
2022-11-11 184

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
44 44 -
45 45 -
46 46 -
47 47 -
Drive configuration

Management
Mode
2022-11-11 185

Management
Mode

SAS/SAT only card
drivesa. drive: CPU
only support card
A drives. NVMe RAID
drivesa. controller
card must be
installed in
slot 1.
⚫ NVMe
drive: CPU
Slot numbers
2022-11-11 186

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 187
Drive configuration

Management
Mode

11 and 41 drive: CPU
support support
only only
SATA SATA
drives. drives.
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
11 and 41 RAID
only only card
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
only only The PCIe
SAS/SAT SAS/SAT RAID
card must be
2022-11-11 188

Management
Mode
⚫ I/O module installed in
3: 4 x 2.5" slot 1.
− Slots 44 ⚫ NVMe
to 47 drive: CPU
support
only
NVMe
drivesa.
card.
⚫ I/O module
3: 4 x 2.5" The PCIe
RAID
− Slots 44 controller
to 47 card must be
support configured
only in the
NVMe built-in
drivesa. PCIe slot.
− The
screw-in
RAID
controlle
r card
manages
the
SAS/SAT
A drives
in slots
40 to 41.
− The PCIe
RAID
controlle
r card
manages
SAS/SAT
A drives
in slots 0
to 11.
⚫ NVMe
drive: CPU
2022-11-11 189

Management
Mode
(4 x NVMe) 7 support and 41 drive: CPU
only support
SATA only
drives. SATA
− Slots 8 to drives.
11
support
only
SATA/N
VMe
drives.
(4 x NVMe) 7 support and 41 RAID
SAS/SAT only card
A drives. SAS/SAT ⚫ NVMe
11
support
SAS/SAT
A/NVMe
drives.
(4 x NVMe) 7 support and 41 controller
only support card
A drives. SAS/SAT RAID
− Slots 8 to A drives. controller
11 card must be
support installed in
SAS/SAT slot 1.
A/NVMe ⚫ NVMe
drives. drive: CPU
2022-11-11 190
Slot numbers

0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
11 11
40 40
41 41
44 44
45 45
46 46
47 47
2022-11-11 191

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
44 44 -
45 45 -
46 46 -
2022-11-11 192

47 47 -


0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 0
41 41 1
2022-11-11 193

44 44 -
45 45 -
46 46 -
47 47 -

5-70
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
2022-11-11 194
11 11
40 40
41 41
⚫ Drive slot numbers of 12 x 3.5" drive pass-through configuration 2 (4 x NVMe) and 12 x

3.5" drive pass-through configuration 3 (4 x NVMe) in Table 5-70

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8Note
9 9 9Note
10 10 10Note
11 11 11Note
2022-11-11 195

40 40 12
41 41 13
5.2.5.1.4 12 x 3.5" drive EXP configuration
Drive configuration

Management
Mode

EXP 12 x 3.5" 1: 2 x 3.5" drive: 1 x
11 and 41 RAID
only only card
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
only
NVMe
drivesa.
EXP 12 x 3.5" 1: 2 x 3.5" drive: 1 x
only only The PCIe
⚫ I/O module card must be
3: 4 x 2.5" installed in
slot 1.
− Slots 44
⚫ NVMe
to 47
support drive: CPU
only
2022-11-11 196

Management
Mode
NVMe
drivesa.
configuration 3 − Slots 0 to − Slots 40 3.5" screw-in
11 and 41 − Slots 36 RAID
support support to 39 controller
only only support card
SAS/SAT SAS/SAT only ⚫ NVMe
A drives. A drives. SAS/SAT drive: CPU
⚫ I/O module A drives.
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
configuration 4 − Slots 0 to − Slots 40 3.5" PCIe RAID
only only support The PCIe
SAS/SAT SAS/SAT only RAID
A drives. A drives. SAS/SAT controller
⚫ I/O module A drives. card must be
slot 1.
− Slots 44
⚫ NVMe
to 47
support drive: CPU
SAS/SAT
A/NVMe
drivesa.
EXP 12 x 3.5" 1: 2 x 3.5" drive: 1 x
card.
⚫ I/O module
RAID
to 47 card must be
2022-11-11 197

Management
Mode
support configured
only in the
NVMe built-in
drivesa. PCIe slot.
− The
screw-in
RAID
controlle
r card
manages
the
SAS/SAT
A drives
in slots
40 to 41.
− The PCIe
RAID
controlle
r card
manages
SAS/SAT
A drives
in slots 0
to 11.
⚫ NVMe
drive: CPU
EXP 12 x 3.5" 1: 2 x 3.5" drive: 1 x
configuration 6b − Slots 0 to − Slots 40 PCIe RAID
only only The PCIe
slot 1.
− Slots 44
⚫ NVMe
to 47
support drive: CPU
only
NVMe
drivesa.
configuration 7b − Slots 0 to − Slots 40 3.5" PCIe RAID
2022-11-11 198

Management
Mode
only only support The PCIe
SAS/SAT SAS/SAT only RAID
A drives. A drives. SAS/SAT controller
⚫ I/O module A drives. card must be
slot 1.
− Slots 44
⚫ NVMe
to 47
support drive: CPU
SAS/SAT
A/NVMe
drivesa.
⚫ b: Use the 12 x 3.5-inch EXP drive backplane 3.
Slot numbers
⚫ Drive slot numbers of 12 x 3.5" drive EXP configuration 1 and 12 x 3.5" drive EXP

0 0 0
1 1 1
2022-11-11 199

2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 200

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 201

9 9 9
10 10 10
11 11 11
36 36 8
37 37 9
38 38 10
39 39 11
40 40 12
41 41 13
44 44 12Note
45 45 13Note
46 46 14Note
47 47 15Note
⚫ If duplicate RAID controller card numbers are displayed, identify the RAID controller
cards based on the EID.
in Table 5-76
2022-11-11 202

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 0
41 41 1
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 203

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
40 40 12
41 41 13
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 204

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
2022-11-11 205

9 9 9
10 10 10
11 11 11
36 36 8
37 37 9
38 38 10
39 39 11
40 40 12
41 41 13
44 44 12Note
45 45 13Note
46 46 14Note
47 47 15Note
5.2.5.1.5 25 x 2.5" drive EXP configuration
Drive configuration

Management
Mode

EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
24 and 41 RAID
only only card
⚫ I/O module
3: 4 x 2.5"
− Slots 44
2022-11-11 206

Management
Mode
to 47
support
only
NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
only only The PCIe
slot 1.
− Slots 44
⚫ NVMe
to 47
support drive: CPU
only
NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
24 and 41 RAID
only only card
⚫ I/O module
3: 4 x 2.5"
− Slots 44
to 47
support
SAS/SAT
A/NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
only only The PCIe
installed in
2022-11-11 207

Management
Mode
3: 4 x 2.5" slot 1.
− Slots 44 ⚫ NVMe
to 47 drive: CPU
support
SAS/SAT
A/NVMe
drivesa.
EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
card.
⚫ I/O module
RAID
to 47 card must be
support configured
only in the
NVMe built-in
drivesa. PCIe slot.
− The
screw-in
RAID
controlle
r card
manages
the
SAS/SAT
A drives
in slots
40 to 41.
− The PCIe
RAID
controlle
r card
manages
SAS/SAT
A drives
in slots 0
to 24.
⚫ NVMe
drive: CPU
EXP 25 x 2.5" 1: 2 x 3.5" drive: 1 x
2022-11-11 208

Management
Mode
only only The PCIe
− Slots 44 slot 1.
to 47 ⚫ NVMe
support drive: CPU
only
NVMe
drivesa.
Slot numbers

0 0 0
2022-11-11 209

1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 -
45 45 -
46 46 -
47 47 -
2022-11-11 210

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
2022-11-11 211

17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 8Note
45 45 9Note
46 46 10Note
47 47 11Note
in Table 5-82
2022-11-11 212

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 0
41 41 1
44 44 -
45 45 -
2022-11-11 213

46 46 -
47 47 -

0 0 0
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
11 11 11
12 12 12
2022-11-11 214

13 13 13
14 14 14
15 15 15
16 16 16
17 17 17
18 18 18
19 19 19
20 20 20
21 21 21
22 22 22
23 23 23
24 24 24
40 40 25
41 41 26
44 44 -
45 45 -
46 46 -
47 47 -
5.2.5.2 Drive Indicators
SAS/SATA Drive Indicators
Figure 5-167 SAS/SATA drive indicators
2022-11-11 215
Table 5-87 SAS/SATA drive indicators

(Green) (Yellow)
Off Off The drive is not in position.

Steady on Off The drive is detected.
Blinking at 4 Hz Off Data is being read or written properly, or
data on the primary drive is being rebuilt.
Steady on Blinking at 1 Hz The drive is being located.
Blinking at 1 Hz Blinking at 1 Hz Data on the secondary drive is being rebuilt.
Off Steady on A drive in a RAID array is removed.
Steady on Steady on The drive is faulty.
NVMe Drive Indicators
Figure 5-168 NVMe drive indicators
⚫ If the VMD function is enabled and the latest VMD driver is installed, the NVMe drives
support surprise hot swap.
Table 5-88 NVMe drive indicators (VMD enabled)

(Green) (Yellow)

properly.
NVMe drive.
Off Blinking at 2 Hz The NVMe drive is being located.
Off Blinking at 8 Hz The data on the secondary NVMe drive is
being rebuilt.
2022-11-11 216

(Green) (Yellow)
⚫ If the VMD function is disabled, NVMe drives support only orderly hot swap.
Table 5-89 NVMe drive indicators (VMD disabled)

(Green) (Yellow)

properly.
NVMe drive.
Off Blinking at 2 Hz The NVMe drive is being located or
hot-swapped.
Off Blinking at 0.5 Hz The NVMe drive has completed the hot
swap process and is removable.
M.2 FRU Indicators

The server supports the Avago SAS3004iMR RAID controller card, which supports two M.2
FRUs.
Figure 5-169 M.2 FRU indicators
Table 5-90 M.2 FRU indicators

Off Off The M.2 FRU is not detected.
2022-11-11 217

Steady on Off The M.2 FRU is inactive.

Blink Off The M.2 FRU is in the read/write or
synchronization state.
Steady on Blink The M.2 FRU is being located.
Blink Blink The RAID array is being rebuilt.
Off Steady on The M.2 FRU cannot be detected or
is faulty.
Steady on Steady on The M.2 FRU RAID status is
abnormal.
5.2.5.3 RAID Controller Card

The RAID controller card supports RAID configuration, RAID level migration, and drive
roaming.
⚫ For details about the RAID controller card, see V6 Server RAID Controller Card User
Guide.
5.2.6 Network
5.2.6.1 OCP 3.0 Network Adapters
OCP 3.0 network adapters provide network expansion capabilities.
⚫ The FlexIO slot supports the OCP 3.0 network adapter, which can be configured as
required.
⚫ For details about the OCP 3.0 network adapter, see the documents of each OCP 3.0
network adapter.
5.2.7 I/O Expansion

5.2.7.1 PCIe Card
PCIe cards provide ease of expandability and connection.
⚫ A maximum of five PCIe 3.0 and two PCIe 4.0 slots are supported.
2022-11-11 218
5.2.7.2 PCIe Slots
PCIe Slots
⚫ I/O module 3 provides slots 5 and 6. If a one-slot PCIe riser module is used, slot 5 is
unavailable.
⚫ The mainboard provides PCIe slots 1, 2, 3, and 4, and a built-in PCIe slot.
PCIe Riser Module

⚫ PCIe riser module
Provides PCIe slots 5 and 6 when installed in I/O module 3.
2022-11-11 219
⚫ PCIe riser module

Provides PCIe slot 6 when installed in I/O module 3.
2022-11-11 220
5.2.7.3 PCIe Slot Description
The PCIe slots mapping to a vacant CPU socket are unavailable.

rd Width (B/D/F )
)
Screw-i CPU1 PCIe x8 x8 Port1C 30/4/0 33/0/0 -

n 3.0
RAID
controll
er card
FlexIO CPU1 PCIe x16 x16 Port0A 16/2/0 17/0/0 OCP
card 3.0 3.0
specific
ations
Built-in CPU1 PCIe x16 x16 Port3A 64/2/0 65/0/0 Half-he
PCIe 3.0 ight
slot and
half-len
gth
Slot 1 CPU1 PCIe x8 x8 Port1A 30/2/0 31/0/0 Half-he
3.0 ight
and
half-len
gth
Slot 2 CPU1 PCIe x16 x16 Port2A 4A/2/0 4B/0/0 Half-he
3.0 ight
and
half-len
gth
Slot 3 CPU2 PCIe x16 x16 Port0A 97/2/0 98/0/0 Half-he
3.0 ight
and
half-len
gth
Slot 4 CPU2 PCIe x16 x16 Port1A B0/2/0 B1/0/0 Half-he
3.0 ight
and
half-len
gth
Slot5 CPU2 PCIe x16 ⚫ 2-sl Port2A C9/2/0 CA/0/0 Full-hei
4.0 ot ght and
PR half-len
2022-11-11 221

rd Width (B/D/F )
)
M: gth
x8
⚫ 1-sl
ot
PR
M:
N/A
Slot6 CPU2 PCIe x16 ⚫ 2-sl Port2C C9/4/0 CC/0/0 Full-hei
4.0 ot ght and
PR half-len
M: gth
x8
⚫ 1-sl
ot
PR
M:
x16
5.2.8 PSUs
⚫ The server supports one or two PSUs.
⚫ The server supports AC or DC PSUs.
⚫ The PSUs are hot-swappable.
⚫ The server supports two PSUs in 1+1 redundancy.
⚫ PSUs of the same P/N code must be used in a server.
⚫ The PSUs are protected against short circuit. Double-pole fuse is provided for the PSUs
with dual input live wires.
⚫ If the DC power supply is used, purchase the DC power supply that meets the
requirements of the safety standards or the DC power supply that has passed the CCC
certification.
2022-11-11 222
Figure 5-173 PSU positions
5.2.9 Fan Modules

⚫ The server supports four fan modules.
⚫ The fan modules are hot-swappable.
⚫ N+1 redundancy is supported. That is, the server can work properly when a single fan
fails.
⚫ The fan speed can be adjusted.
⚫ Fan modules of the same P/N code must be used in a server.
Figure 5-174 Positions of fan modules
2022-11-11 223
5.2.10 LCD
Only the 8 x 2.5" drive pass-through configuration supports the LCD.
Function
The LCD displays the installation status and running status of server components and enables
users to set the IP address of the iBMC management network port on the server.
The LCD and the server iBMC form an LCD subsystem. The LCD directly obtains device
information from the iBMC. The LCD subsystem does not store device data.
Figure 5-175 LCD subsystem working principle
2022-11-11 224
UI
Figure 5-176 LCD main interface
Table 5-92 Parameters on the LCD home screen
Tab Function
Status Displays the port 80 status, serial number, component status,

and component alarms of the server.
Monitor Displays the current power, CPU temperature, and inlet
temperature of the server.
Info. Displays the IP address and MAC address of the iBMC
management network port, device SNs, asset information, and
firmware version.
Setting Sets the IP address of the iBMC management network port.
For details about how to use the LCD module, see FusionServer Rack Server LCD User
Guide.
2022-11-11 225
5.2.11 Board
5.2.11.1 Mainboard
Figure 5-177 2288H V6-16DIMM mainboard
1 PCIe slot 4 (PCIE 2 PCIe slot 3 (PCIE

SLOT4/J2034) SLOT3/J2035)
3 PCIe slot 2 (PCIE 4 PCIe slot 1 (PCIE
SLOT2/J2033) SLOT1/J2032)
2022-11-11 226
5 BMC management network 6 USB 3.0 port (USB 3.0

port and management serial CONN/J17)
port (BMC_GE/COM/J2038)
7 LCD connector (LCD 8 OCP 3.0 network adapter
CONN/J9) connector (OCP1
CONN/J108)
9 Built-in USB 3.0 connector 10 VGA port (VGA
(INNER USB 3.0/J110) CONN/J2037)
11 Screw-in RAID controller 12 TPM/TCM connector (J10)
card connector (RAID
CARD/J86)
13 SATA connector 2 14 mini-SAS HD connector C
(SATA2/J2) (MINIHD PORTC/J4)
15 mini-SAS HD connector B 16 Rear-drive backplane power
(MINIHD PORTB/J5) connector 1 (REAR BP
PWR1/J64)
17 SATA connector 1 18 mini-SAS HD connector A
(SATA1/J1) (MINIHD PORTA/J6)
19 NC-SI connector (NCSI 20 Cell battery holder (U9)
CONN/J114)
21 Built-in PCIe slot (PCIe 22 Fan module 4 connector
SLOT7/J2036) (FAN4/J98)
23 VROC key connector (Soft 24 Fan module 3 connector
RAID KEY/J3)a (FAN3/J95)
25 Intrusion sensor connector 26 Low-speed signal connector
(INTRUDER CONN/S1) for the front-drive backplane
(FRONT HDD BP/J75)
27 Fan module 2 connector 28 Fan module 1 connector
(FAN2/J91) (FAN1/J67)
29 Left mounting ear connector 30 Power connector for the
(LCID BOARD/J106) built-in-drive backplane
(INNER HDD PWR/J22)
31 Low-speed signal connector 32 Power connector for the
for the built-in-drive front-drive backplane (HDD
backplane (INNER HDD BP PWR1/J88)
BP/J27)
33 Rear-drive backplane power 34 CPU2 LP Slimline 4
connector 2 (REAR BP connector (SLIMLINE4/J12)
PWR2/J20)
35 CPU2 LP Slimline 3 36 PSU 2 connector (PSU2/J56)
connector (SLIMLINE3/J85)
37 PSU 1 connector (PSU1/J28) 38 Rear 4 x 2.5" drive backplane
low-speed signal connector
2022-11-11 227
(REAR 4*2.5 HDD BP/J57)

5.2.11.2 Drive Backplane
Front hard disk backplane

All drive configurations in 5.2.5.1.1 8 x 2.5" drive pass-through configuration support
this backplane.
1 Indicator signal cable 2 DVD drive power connector

connector (REAR BP1/J3)a (DVD/J11)
2022-11-11 228
This backplane is supported by all drive configurations in 5.2.5.1.2 8 x 3.5" drive

pass-through configuration and 12 x 3.5" drive pass-through configuration 1, 12 x 3.5"
drive pass-through configuration 2, 12 x 3.5" drive pass-through configuration 3, and 12
x 3.5" drive pass-through configuration 4 (dual RAID controller cards) in 5.2.5.1.3 12 x
3.5" drive pass-through configuration.

(PORT B/J4) connector (HDD BP/J6)
5 Mini-SAS HD connector 6 Indicator signal cable
(PORT A/J3) connector (REAR BP1/J8)
7 Power connector - -
(POWER/J1)
⚫ 12 x 3.5" drive NVMe backplane (4 x NVMe)

This backplane is supported by 12 x 3.5" drive pass-through configuration 1 (4 x NVMe),
12 x 3.5" drive pass-through configuration 2 (4 x NVMe), and 12 x 3.5" drive
pass-through configuration 3 (4 x NVMe) in 5.2.5.1.3 12 x 3.5" drive pass-through
configuration.
Figure 5-180 12 x 3.5" drive NVMe backplane (4 x NVMe)
2022-11-11 229

(PORT B/J29) (PORT A/J28)
5 Backplane signal cable 6 Indicator signal cable
connector (HDD_BP/J1) connector (REAR BP1/J31)
7 Backplane power connector 8 LP slimline 1 connector
(HDD_BP/J24) (SLIMLINE 1/J4)
9 LP slimline 2 connector - -
(SLIMLINE 2/J37)
⚫ 12 x 3.5" drive EXP backplane 1 (P/N code: 03027FAT)

3.5" drive EXP configuration.


3.5" drive EXP configuration.
2022-11-11 230


This backplane is supported by 12 x 3.5" drive EXP configuration 6, and 12 x 3.5" drive
EXP configuration 7 in 5.2.5.1.4 12 x 3.5" drive EXP configuration.

connector (REAR BP0/J31) (REAR PORT/J34)
⚫ 25 x 2.5" drive backplane (P/N code: 03027QFN and 0302Y073)
2022-11-11 231
All drive configurations in 5.2.5.1.5 25 x 2.5" drive EXP configuration support this
backplane.

connector (HDD_BP/J1) (POWER/J24)
Built-in-Drive Backplane

(PORT A/J3) connector (INNER HDD
BP/J1)
3 Backplane power connector - -
(INNER HDD PWR/J2)
Rear-drive backplane
2022-11-11 232
1 Indicator signal cable 2 mini-SAS HD connector

connector (REAR BP/J5) (REAR PORT/J2)
3 Power connector (BP - -
PWR/J1)
1 LP slimline 4 connector 2 Power connector

(SLIM_4/J1001) (POWR/J2502)
3 LP slimline 3 connector 4 Backplane signal cable
(SLIM_3/J901) connector (HDD BP/J2302)
5 mini-SAS HD connector (Port - -
A/J801)
2022-11-11 233
Technical White Paper 6 Product Specifications
6 Product Specifications
6.1 2288H V6-32DIMM

6.2 2288H V6-16DIMM
6.1 2288H V6-32DIMM

6.1.1 Technical Specifications
Table 6-1 Technical specifications
Component Specifications
Form factor 2U rack server

Chipset Intel® C621A
Processor Supports one or two processors.
⚫ Third-generation Intel® Xeon® Scalable Ice Lake
processors
⚫ Built-in memory controller and eight memory channels per
processor
⚫ Built-in PCIe controller, supporting PCIe 4.0 and 64 lanes
per processor
⚫ Three UPI buses between processors, providing up to 11.2
GT/s transmission per channel
⚫ Up to 40 cores
⚫ Max. 3.6 GHz
⚫ Min. 1.5 MB L3 cache per core
⚫ Max. 270 W TDP
NOTE
The preceding information is for reference only. For details, see
"Search Parts" in the Compatibility Checker.
DIMM Supports 32 memory module slots.

⚫ Up to 32 DDR4 memory modules
2022-11-11 234
− RDIMM and LRDIMM support
− Max. 3200 MT/s memory speed
− The DDR4 memory modules of different types
(RDIMM and LRDIMM) and specifications (capacity,
bit width, rank, and height) cannot be used together.
− A server must use DDR4 memory modules of the same
P/N code.
⚫ Up to 16 PMem modules
− The PMem modules must be used with the DDR4
memory modules, and only one PMem module can be
installed in each memory channel.
− The PMem modules support the AD or MM mode.
− The PMem modules of different specifications (capacity
and rank) cannot be used together.
− For details about the PMem modules, see FusionServer
PMem 200 User Guide.
NOTE
Storage Supports a variety of drive configurations. For details, see

⚫ Supports two M.2 SSDs.
− M.2 SSDs are supported for RAID configuration when
the server is configured with an Avago SAS3004iMR
− M.2 SSDs are supported for VROC (SATA RAID)
configuration when the server is configured with an M.2
SSD adapter card.
NOTE
⚫ The M.2 SSD is used only as a boot device for installing the OS.
Small-capacity (32 GB or 64 GB) M.2 SSDs do not support
logging due to poor endurance. If a small-capacity M.2 SSD is
used as the boot device, a dedicated log drive or log server is
required for logging. For example, you can dump VMware logs in
either of the following ways:
⚫ Redirect /scratch. For details, see
https://kb.vmware.com/s/article/1033696.
⚫ Configure syslog. For details, see
⚫ The M.2 SSD cannot be used to store data due to poor endurance.
In write-intensive applications, the M.2 SSD will wear out in a
short time.
If you want to use SSDs or HDDs as data storage devices, use
enterprise-level SSDs or HDDs with high DWPD.
⚫ The M.2 SSD is not recommended for write-intensive service
software due to poor endurance.
⚫ Do not use M.2 SSDs for cache.
2022-11-11 235
⚫ Supports hot swap of SAS/SATA/NVMe U.2 drives.
NOTE
The NVMe drives support:
⚫ Before using the VMD function, contact technical support
engineers of the OS vendor to check whether the OS supports the
VMD function. If yes, check whether the VMD driver needs to be
manually installed and check the installation method.
⚫ Surprise hot swap if the VMD function is enabled and the latest
Intel VMD driver is installed.
⚫ Orderly hot swap if the VMD function is disabled.
⚫ Supports a variety of RAID controller cards. For details,
see "Search Parts" in the Compatibility Checker.
− The RAID controller card supports RAID configuration,
RAID level migration, and drive roaming.
− The RAID controller card supports a supercapacitor for
power-off protection to ensure user data security.
− The PCIe RAID controller card occupies one PCIe slot.
− The RAID controller card supports Intel VROC (VMD
NVMe RAID) for RAID management. Different VROC
keys can be configured to support different RAID
levels.
For details about the RAID controller card, see V6 Server
RAID Controller Card User Guide.
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as the boot
drive.
Network Supports expansion capability of multiple types of networks.

⚫ OCP 3.0 network adapter
− The two FlexIO card slots support two OCP 3.0 network
adapter respectively, which can be configured as
required.
− Supports orderly hot swap.
NOTE
The OCP 3.0 network adapter supports orderly hot swap only when the
VMD function is disabled.
− Supports a variety of OCP 3.0 network adapters. For
details, see "Search Parts" in the Compatibility Checker.
I/O expansion Supports PCIe slots.
⚫ Server model with drive module or PCIe riser module
(PRM) on the rear panel: one PCIe slot dedicated for a
screw-in RAID controller card, two FlexIO slots dedicated
for OCP 3.0 network adapters, and eight slots for standard
PCIe cards.
⚫ Server model with four GPU cards installed on the rear
panel: one PCIe slot dedicated for a screw-in RAID
controller card, two FlexIO slots dedicated for OCP 3.0
network adapters, and five slots for PCIe cards.
2022-11-11 236
⚫ Server model with 11 standard PCIe cards installed on the
rear panel: one PCIe slot dedicated for a screw-in RAID
controller card, two FlexIO slots dedicated for OCP 3.0
network adapters, and 11 slots for standard PCIe cards.
For details, see 5.1.7.2 PCIe Slots and 5.1.7.3 PCIe Slot
Description.
NOTE
Port Supports a variety of ports.

⚫ Ports on the front panel:
− One USB Type-C iBMC direct connect management
port
− Two USB 3.0 ports
− One DB15 VGA port
⚫ Ports on the rear panel:
− One RJ45 serial port
− One RJ45 management network port
⚫ Built-in ports:
− One USB 3.0 port
− Two SATA ports
NOTE
You are not advised to install the operating system on the USB storage
media.
Video card An SM750 video chip with 32 MB display memory is

integrated on the mainboard. The maximum display resolution
is 1920 x 1200 at 60 Hz with 16 M colors.
NOTE
⚫ The integrated video card can provide the maximum display
resolution (1920 x 1200) only after the video card driver matching
the operating system version is installed. Otherwise, only the
default resolution supported by the operating system is provided.
⚫ If both the front and rear VGA ports are connected to monitors,
only the monitor connected to the front VGA port displays
information.
System management ⚫ UEFI

⚫ iBMC
⚫ NC-SI
⚫ Integration with third-party management systems
Security feature ⚫ Power-on password
⚫ Administrator password
⚫ TCM (only in China)/TPM
2022-11-11 237
⚫ Secure boot
⚫ Front bezel (optional)
⚫ Chassis cover opening detection
6.1.2 Environmental Specifications

Table 6-2 Environmental specifications
Category Specifications
Temperature ⚫ Operating temperature: 5°C to 45°C (41°F to 113°F)

(ASHRAE Classes A1 to A4 compliant)
⚫ Storage temperature (within three months): –30°C to +60°C
(–22°F to 140°F)
⚫ Storage temperature (within six months): –15°C to +45°C
(5°F to 113°F)
⚫ Storage temperature (within one year): –10°C to +35°C
(14°F to 95°F)
⚫ Maximum rate of temperature change: 20°C (36°F) per
hour, 5°C (9°F) per 15 minutes
NOTE
The highest operating temperature varies depending on the server
configuration. For details, see A.3.1 2288H V6-32DIMM.
Relative humidity (RH, ⚫ Operating humidity: 8% to 90%

non-condensing) ⚫ Storage humidity (within three months): 8% to 85%
⚫ Storage humidity (within six months): 8% to 80%
⚫ Storage humidity (within one year): 20% to 75%
⚫ Maximum humidity change rate: 20%/h
Air volume ≥ 204 cubic feet per minute (CFM)
Operating altitude ≤ 3050 m (10006.44 ft)
⚫ When the server configuration complies with ASHRAE
Classes A1 and A2 and the altitude is above 900 m
(2952.76 ft), the highest operating temperature decreases by
1°C (1.8°F) for every increase of 300 m (984.24 ft).
Class A3 and the altitude is above 900 m (2952.76 ft), the
highest operating temperature decreases by 1°C (1.8°F) for
every increase of 175 m (574.14 ft).
⚫ HDDs cannot be used at an altitude of over 3050 m
(10006.44 ft).
2022-11-11 238
Corrosive gaseous Maximum corrosion product thickness growth rate:

contaminant ⚫ Copper corrosion rate test: 300 Å/month (meeting level G1
requirements of the ANSI/ISA-71.04-2013 standard on
gaseous corrosion)
⚫ Silver corrosion rate test: 200 Å/month
Particle contaminant ⚫ The equipment room environment meets the requirements
of ISO 14664-1 Class 8.
⚫ There is no explosive, conductive, magnetic, or corrosive
dust in the equipment room.
NOTE
It is recommended that the particulate pollutants in the equipment room
be monitored by a professional organization.
Acoustic noise The declared A-weighted sound power levels (LWAd) and
declared average bystander position A-weighted sound
pressure levels (LpAm) listed are measured at 23°C (73.4°F) in
accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
⚫ Idle:
− LWAd: 5.73 Bels
− LpAm: 40.2 dBA
⚫ Operating:
− LWAd: 6.62 Bels
− LpAm: 49.1 dBA
NOTE
Actual sound levels generated during server operation vary depending
on server configuration, load, and ambient temperature.
SSDs and HDDs (including NL-SAS, SAS, and SATA) cannot be preserved for a long time in the
power-off state. Data may be lost or faults may occur if the preservation duration exceeds the specified
maximum duration. When drives are preserved under the storage temperature and humidity specified in
the preceding table, the following preservation time is recommended:
⚫ Maximum preservation duration of SSDs:
⚫ 12 months in power-off state without data stored
⚫ 3 months in power-off state with data stored
⚫ Maximum preservation duration of HDDs:
⚫ 6 months in unpacked/packed and powered-off state
⚫ The maximum preservation duration is determined according to the preservation specifications
provided by drive vendors. For details, see the manuals provided by drive vendors.
2022-11-11 239
6.1.3 Physical Specifications

Table 6-3 Physical specifications
Category Description
Dimensions (H x W x D) ⚫ Chassis with 3.5" drives: 86.1 mm × 447 mm × 790 mm

(3.39 in. x 17.60 in. x 31.10 in.)
⚫ Chassis with 2.5" drives: 86.1 mm × 447 mm × 790 mm
(3.39 in. x 17.60 in. x 31.10 in.)
Figure 6-1 Physical dimensions (example: a chassis with 3.5"

drives)
NOTE
⚫ See Figure 6-1 for methods in measuring physical dimensions of
the chassis.
⚫ Methods measuring chassis with 3.5" and 2.5" drives are the same.
The 3.5" drive chassis is used as an example.
Installation dimension ⚫ Requirements for cabinet installation:

requirements 19-inch standard cabinet compliant with the International
Electrotechnical Commission (IEC) 297 and EIA-310-E
standards
− Cabinet width: 482.6 mm (19.00 in.)
− Cabinet depth ≥ 1000 mm (39.37 in.)
⚫ Requirements for guide rail installation:
− L-shaped guide rails: apply only to xFusion cabinets.
− Adjustable L-shaped guide rail: apply to cabinets with a
distance of 543.5 mm to 848.5 mm (21.40 in. to 33.41
in.) between the front and rear mounting bars.
− Ball bearing rail kit: applies to cabinets with a distance
of 609 mm to 950 mm (23.98 in. to 37.40 in.) between
the front and rear mounting bars.
2022-11-11 240
Fully equipped weight ⚫ Net weight

− Maximum weight for server with 8 x 2.5" front drives:
22.5 kg (49.60 lb)
23.5 kg (51.80 lb)
35.5 kg (78.26 lb)
25.5 kg (56.22 lb)
25.5 kg (56.22 lb)
25.5 kg (56.22 lb)
⚫ Packaging materials: 5 kg (11.03 lb)
Power consumption The power consumption parameters vary with hardware
configurations (including the configurations complying with
EU ErP). Use the Power Calculator to obtain specific
information.
6.2 2288H V6-16DIMM

6.2.1 Technical Specifications
Table 6-4 Technical specifications
Form factor 2U rack server

Chipset Intel® C621A
Processor Supports one or two processors.
⚫ Third-generation Intel® Xeon® Scalable Ice Lake
processors
⚫ Built-in memory controller and eight memory channels per
processor
⚫ Built-in PCIe controller, supporting PCIe 4.0 and 64 lanes
per processor
⚫ Three UPI buses between processors, providing up to 11.2
GT/s transmission per channel
⚫ Up to 40 cores
⚫ Max. 3.6 GHz
⚫ Min. 1.5 MB L3 cache per core
2022-11-11 241
⚫ Max. 270 W TDP
NOTE
DIMM ⚫ Up to 16 DDR4 memory modules

− RDIMM and LRDIMM support
− The DDR4 memory modules of different types
(RDIMM and LRDIMM) and specifications (capacity,
bit width, rank, and height) cannot be used together.
− A server must use DDR4 memory modules of the same
P/N code.
NOTE
Storage Supports a variety of drive configurations. For details, see

⚫ Supports two M.2 SSDs.
− M.2 SSDs are supported for RAID configuration when
the server is configured with an Avago SAS3004iMR
NOTE
⚫ The M.2 SSD is used only as a boot device for installing the OS.
Small-capacity (32 GB or 64 GB) M.2 SSDs do not support
logging due to poor endurance. If a small-capacity M.2 SSD is
used as the boot device, a dedicated log drive or log server is
required for logging. For example, you can dump VMware logs in
either of the following ways:
⚫ Redirect /scratch. For details, see
⚫ Configure syslog. For details, see
⚫ The M.2 SSD cannot be used to store data due to poor endurance.
In write-intensive applications, the M.2 SSD will wear out in a
short time.
If you want to use SSDs or HDDs as data storage devices, use
enterprise-level SSDs or HDDs with high DWPD.
⚫ The M.2 SSD is not recommended for write-intensive service
software due to poor endurance.
⚫ Do not use M.2 SSDs for cache.
⚫ Supports hot swap of SAS/SATA/NVMe U.2 drives.
NOTE
The NVMe drives support:
⚫ Before using the VMD function, contact technical support
engineers of the OS vendor to check whether the OS supports the
VMD function. If yes, check whether the VMD driver needs to be
manually installed and check the installation method.
⚫ Surprise hot swap if the VMD function is enabled and the latest
2022-11-11 242
Intel VMD driver is installed.
⚫ Orderly hot swap if the VMD function is disabled.
⚫ Supports a variety of RAID controller cards. For details,
see "Search Parts" in the Compatibility Checker.
− The RAID controller card supports RAID configuration,
RAID level migration, and drive roaming.
− The RAID controller card supports a supercapacitor for
power-off protection to ensure user data security.
− The PCIe RAID controller card occupies one PCIe slot.
For details about the RAID controller card, see V6 Server
RAID Controller Card User Guide.
NOTE
If the BIOS is in legacy mode, the 4K drive cannot be used as the boot
drive.
Network Supports expansion capability of multiple types of networks.

⚫ OCP 3.0 network adapter
− The FlexIO card slot supports OCP 3.0 network
adapters, which can be configured as required.
− Supports orderly hot swap.
NOTE
The OCP 3.0 network adapter supports orderly hot swap only when the
VMD function is disabled.
− Supports a variety of OCP 3.0 network adapters. For
details, see "Search Parts" in the Compatibility Checker.
I/O expansion Supports 9 PCIe slots.
⚫ One PCIe slot dedicated for a screw-in RAID controller
card, one FlexIO slot dedicated for an OCP 3.0 network
adapter, and seven PCIe slots for standard PCIe cards.
For details, see 5.2.7.2 PCIe Slots and 5.2.7.3 PCIe Slot
Description.
⚫ Support GPU cards.
NOTE
Port Supports a variety of ports.

⚫ Ports on the rear panel:
− One RJ45 serial port
− One RJ45 management network port
⚫ Built-in ports:
− One USB 3.0 port
− Two SATA ports
2022-11-11 243
NOTE
You are not advised to install the operating system on the USB storage
media.
Video card An SM750 video chip with 32 MB display memory is

integrated on the mainboard. The maximum display resolution
is 1920 x 1200 at 60 Hz with 16 M colors.
NOTE
The integrated video card can provide the maximum display resolution
(1920 x 1200) only after the video card driver matching the operating
system version is installed. Otherwise, only the default resolution
supported by the operating system is provided.
System management ⚫ UEFI

⚫ iBMC
⚫ NC-SI
⚫ Integration with third-party management systems
Security feature ⚫ Power-on password
⚫ Administrator password
⚫ TCM (only in China)/TPM
⚫ Secure boot
⚫ Front bezel (optional)
⚫ Chassis cover opening detection
6.2.2 Environmental Specifications

Table 6-5 Environmental specifications
Temperature ⚫ Operating temperature: 5°C to 45°C (41°F to 113°F)

(ASHRAE Classes A1 to A4 compliant)
⚫ Storage temperature (within three months): –30°C to +60°C
(–22°F to 140°F)
⚫ Storage temperature (within six months): –15°C to +45°C
(5°F to 113°F)
⚫ Storage temperature (within one year): –10°C to +35°C
(14°F to 95°F)
⚫ Maximum rate of temperature change: 20°C (36°F) per
hour, 5°C (9°F) per 15 minutes
NOTE
The highest operating temperature varies depending on the server
configuration. For details, see A.3.2 2288H V6-16DIMM.
Relative Humidity (RH, ⚫ Operating humidity: 8% to 90%

non-condensing) ⚫ Storage humidity (within three months): 8% to 85%
2022-11-11 244
⚫ Storage humidity (within six months): 8% to 80%
⚫ Storage humidity (within one year): 20% to 75%
⚫ Maximum humidity change rate: 20%/h
Air volume ≥204 CFM
Operating altitude ≤ 3050 m (10006.44 ft)
Classes A1 and A2 and the altitude is above 900 m
(2952.76 ft), the highest operating temperature decreases by
1°C (1.8°F) for every increase of 300 m (984.24 ft).
⚫ HDDs cannot be used at an altitude of over 3050 m
(10006.44 ft).
Corrosive gaseous Maximum corrosion product thickness growth rate:
contaminant ⚫ Copper corrosion rate test: 300 Å/month (meeting level G1
requirements of the ANSI/ISA-71.04-2013 standard on
gaseous corrosion)
⚫ Silver corrosion rate test: 200 Å/month
Particle contaminant ⚫ The equipment room environment meets the requirements
of ISO 14664-1 Class 8.
⚫ There is no explosive, conductive, magnetic, or corrosive
dust in the equipment room.
NOTE
It is recommended that the particulate pollutants in the equipment room
be monitored by a professional organization.
Acoustic noise The declared A-weighted sound power levels (LWAd) and
declared average bystander position A-weighted sound
pressure levels (LpAm) listed are measured at 23°C (73.4°F) in
accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
⚫ Idle:
− LWAd: 5.98 Bels
− LpAm: 42.6 dBA
⚫ Running:
− LWAd: 6.68 Bels
− LpAm: 49.5 dBA
NOTE
Actual sound levels generated during server operation vary depending
2022-11-11 245
on server configuration, load, and ambient temperature.
SSDs and HDDs (including NL-SAS, SAS, and SATA) cannot be preserved for a long time in the
power-off state. Data may be lost or faults may occur if the preservation duration exceeds the specified
maximum duration. When drives are preserved under the storage temperature and humidity specified in
the preceding table, the following preservation time is recommended:
⚫ Maximum preservation duration of SSDs:
⚫ 12 months in power-off state without data stored
⚫ 3 months in power-off state with data stored
⚫ Maximum preservation duration of HDDs:
⚫ 6 months in unpacked/packed and powered-off state
⚫ The maximum preservation duration is determined according to the preservation specifications
provided by drive vendors. For details, see the manuals provided by drive vendors.
6.2.3 Physical Specifications

Table 6-6 Physical specifications
Dimensions (H x W x D) ⚫ Chassis with 3.5" drives: 86.1 mm × 447 mm × 790 mm

(3.39 in. x 17.60 in. x 31.10 in.)
⚫ Chassis with 2.5" drives: 86.1 mm × 447 mm × 790 mm
(3.39 in. x 17.60 in. x 31.10 in.)
Figure 6-2 Physical dimensions (example: a chassis with 3.5"

drives)
NOTE
⚫ See Figure 6-2 for methods in measuring physical dimensions of
the chassis.
⚫ Methods measuring chassis with 3.5" and 2.5" drive are the same.
2022-11-11 246
The 3.5" drive chassis is used as an example.
Installation dimension ⚫ Requirements for cabinet installation:

requirements 19-inch standard cabinet compliant with the International
Electrotechnical Commission (IEC) 297 and EIA-310-E
standards
− Cabinet width: 482.6 mm (19.00 in.)
− Cabinet depth ≥ 1000 mm (39.37 in.)
⚫ Requirements for guide rail installation:
− L-shaped guide rails: apply only to xFusion cabinets.
− Adjustable L-shaped guide rail: apply to cabinets with a
distance of 543.5 mm to 848.5 mm (21.40 in. to 33.41
in.) between the front and rear mounting bars.
− Ball bearing rail kit: applies to cabinets with a distance
of 609 mm to 950 mm (23.98 in. to 37.40 in.) between
the front and rear mounting bars.
Fully equipped weight ⚫ Net weight
− Server with 8 x 2.5" front drives: 22.5 kg (49.60 lb)
⚫ Packaging materials: 5 kg (11.03 lb)
Power consumption The power consumption parameters vary with hardware
configurations (including the configurations complying with
EU ErP). Use the Power Calculator to obtain specific
information.
2022-11-11 247
Technical White Paper 7 Software and Hardware Compatibility
7 Software and Hardware Compatibility
Use the Compatibility Checker to obtain information about the operating systems and
hardware supported.
⚫ If incompatible components are used, the device may be abnormal. This fault is beyond
the scope of technical support and warranty.
⚫ The performance of servers is closely related to application software, basic middleware
software, and hardware. The slight differences of the application software, middleware
basic software, and hardware may cause performance inconsistency between the
application layer and test software layer.
⚫ If the customer has requirements on the performance of specific application software,
contact technical support to apply for POC tests in the pre-sales phase to determine
detailed software and hardware configurations.
⚫ If the customer has requirements on hardware performance consistency, specify the
specific configuration requirements (for example, specific drive models, RAID controller
cards, or firmware versions) in the pre-sales phase.
2022-11-11 248
Technical White Paper 8 Safety Instructions
8 Safety Instructions
8.1 Security
8.2 Maintenance and Warranty
8.1 Security
General Statement
⚫ Comply with local laws and regulations when installing devices. These Safety
Instructions are only a supplement.
⚫ The "DANGER", "WARNING", and "CAUTION" information in this document does
not represent all the safety instructions, but supplements to the safety instructions.
⚫ Observe all safety instructions provided on the device labels when installing hardware.
Follow them in conjunction with these Safety Instructions.
⚫ Only qualified personnel are allowed to perform special tasks, such as performing
high-voltage operations and driving a forklift.
If this device works in a residential environment, the wireless interference may be generated.
Personal Safety
⚫ This equipment is not suitable for use in places where children may be present.
⚫ Only personnel certified or authorized are allowed to install equipment.
⚫ Discontinue any dangerous operations and take protective measures. Report anything
that could cause personal injury or device damage to a project supervisor.
⚫ Do not move devices or install racks and power cables in hazardous weather conditions.
⚫ Do not carry the weight that is over the maximum load per person allowed by local laws
or regulations. Before moving or installing equipment, check the maximum equipment
weight and arrange required personnel.
⚫ Wear clean protective gloves, ESD clothing, a protective hat, and protective shoes, as
shown in Figure 8-1.
2022-11-11 249
Figure 8-1 Safety work wear
⚫ Before touching a device, wear ESD clothing and gloves (or wrist strap), and remove any
conductive objects (such as watches and jewelry). Figure 8-2 shows conductive objects
that must be removed before you touch a device.
Figure 8-2 Removing conductive objects
Figure 8-3 shows how to wear an ESD wrist strap.

a. Put your hands into the ESD wrist strap.
b. Tighten the strap buckle and ensure that the ESD wrist strap is in contact with your
skin.
c. Insert the ground terminal attached to the ESD wrist strap into the jack on the
grounded rack or chassis.
2022-11-11 250
Figure 8-3 Wearing an ESD wrist strap
⚫ Exercise caution when using tools.

⚫ If the installation position of a device is higher than the shoulders of the installation
personnel, use a vehicle such as a lift to facilitate installation. Prevent the device from
falling down and causing personal injury or damage to the device.
⚫ The equipment is powered by high-voltage power sources. Direct or indirect contact
(especially through damp objects) with high-voltage power sources may result in serious
injury or death.
⚫ Ground the equipment before powering it on. Otherwise, personal injury may be caused
by high electricity leakage.
⚫ When a ladder is used, ensure that another person holds the ladder steady to prevent
accidents.
⚫ Do not look into optical ports without eye protection.
Device Security
⚫ Use the recommended power cables at all times.
⚫ Use power cables only for dedicated servers. Do not use them for other devices.
⚫ Before operating equipment, wear ESD clothes and gloves to prevent
electrostatic-sensitive devices from being damaged by ESD.
⚫ When moving a device, hold the bottom of the device. Do not hold the handles of the
installed modules, such as the PSUs, fan modules, drives, and the mainboard. Handle the
equipment with care.
⚫ Exercise caution when using tools.
⚫ Connect the primary and secondary power cables to different power distribution units
(PDUs) to ensure reliable system operation.
⚫ Ground a device before powering it on. Otherwise, high leakage current may cause
device damage.
Transportation Precautions
Improper transportation may damage equipment. Contact the manufacturer for precautions
before attempting transportation.
Transportation precautions include but are not limited to:
⚫ The logistics company engaged to transport the device must be reliable and comply with
international standards for transporting electronics. Ensure that the equipment being
transported is always kept upright. Take necessary precautions to prevent collisions,
corrosion, package damage, damp conditions and pollution.
2022-11-11 251
⚫ Transport each device in its original packaging.

⚫ If the original packaging is unavailable, package heavy, bulky parts (such as chassis and
blades) and fragile parts (such as PCIe cards and optical modules) separately.
For details about the components supported by the server, see "Compatibility" in the Compatibility
Checker.
⚫ Power off all devices before transportation.
Maximum Weight Carried by a Person
Comply with local regulations for the maximum load per person.
Table 8-1 lists the maximum weight one person is permitted to carry as stipulated by a
number of organizations.
Table 8-1 Maximum weight carried per person

Organization Weight (kg/lb)
European Committee for Standardization 25/55.13

(CEN)
International Organization for 25/55.13
Standardization (ISO)
National Institute for Occupational Safety 23/50.72
and Health (NIOSH)
Health and Safety Executive (HSE) 25/55.13
For more information about safety instructions, see Server Safety Information.
8.2 Maintenance and Warranty

For details about the maintenance policy, visit Customer Support Service.
For details about the warranty policy, visit Warranty.
2022-11-11 252
Technical White Paper 9 System Management
9 System Management
This product integrates the new-generation Intelligent Baseboard Management Controller

(iBMC), which complies with Intelligent Platform Management Interface 2.0 (IPMI 2.0)
specifications and provides reliable hardware monitoring and management.
The iBMC provides the following features:
⚫ Various management interfaces
The iBMC provides the following standard interfaces to meet various system integration
requirements:
− DCMI 1.5 interface
− IPMI 1.5/IPMI 2.0 interface
− CLI
− Redfish interface
− HTTPS
− SNMP
⚫ Fault detection and alarm management
Faults can be detected and rectified in advance to ensure 24/7 stable running of the
device.
− The iBMC allows screenshots and videos to be created when the system breaks
down, facilitating cause analysis of the system breakdown.
− The iBMC offers screen snapshots and videos, simplifying routine preventive
maintenance, recording, and auditing.
− The FDM function supports component-based precise fault diagnosis, facilitating
component fault locating and replacement.
− The iBMC supports the reporting of alarms through syslog packets, trap packets,
and emails, helping the upper-layer NMS to collect the fault information about the
server.
− The LCD directly obtains device information from the iBMC.
⚫ Security management
− Software image backup improves system security. Even if the running software
breaks down, the system can be started from the backup image.
− Diversified user security control interfaces are provided to ensure user login
security.
2022-11-11 253
Technical White Paper 9 System Management
− Multiple types of certificates can be imported and replaced to ensure data

transmission security.
⚫ System maintenance interface
− The virtual KVM and virtual media functions facilitate remote maintenance.
− The iBMC supports out-of-band RAID monitoring and configuration to improve
RAID configuration efficiency and management capabilities.
− Smart Provisioning provides a convenient operation interface for installing the OS,
configuring RAID, and performing the upgrade without a CD-ROM.
⚫ Various network protocols
− The NTP synchronizes network time to optimize time configuration.
− The iBMC supports domain name system (DNS) and Lightweight Directory
Application Protocol (LDAP) to implement domain management and directory
service.
⚫ Intelligent power management
− The power capping technology helps you easily improve deployment density.
− The iBMC uses dynamic power saving to reduce operational expenditure (OPEX).
⚫ License management
By managing licenses, you can use the features of the iBMC advanced edition in
authorization mode.
Compared with the standard edition, the iBMC advanced edition provides more
advanced features, such as:
− Implements the OS deployment using Redfish.
− Collect the original data of intelligent diagnosis using Redfish.
2022-11-11 254
Technical White Paper 10 Certifications
10 Certifications
Country/Region Certification Standards
Europe WEEE 2012/19/EU

Europe REACH EC NO. 1907/2006
Europe CE Safety:
EN 62368-1:2014+A11:2017
EMC:
EN 55032:2015+A11:2020
CISPR 32:2015+A1:2019
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019
EN 55035:2017+A11:2020
CISPR 35:2016
EN 55024:2010+A1:2015
CISPR 24:2010+A1:2015
ETSI EN 300 386 V1.6.1:2012
ETSI EN 300 386 V2.1.1:2016
RoHS:
EN IEC 63000:2018
ErP:
Commission Regulation(EU) 424/2019
Russia EAC&GOST ГОСТ CISPR 32-2015
ГОСТ CISPR 24-2013
ГОСТ 30804 3.2-2013
ГОСТ 30804 3.3-2013
ГОСТ 15150-69
UK UKCA Safety:
EN 62368-1:2014+A11:2017
EMC:
2022-11-11 255
Technical White Paper 10 Certifications
Country/Region Certification Standards

EN 55032:2015+A11:2020
CISPR 32:2015+A1:2019
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019
EN 55035:2017+A11:2020
CISPR 35:2016
EN 55024:2010+A1:2015
CISPR 24:2010+A1:2015
ETSI EN 300 386 V1.6.1:2012
ETSI EN 300 386 V2.1.1:2016
RoHS:
BS EN IEC 63000:2018
ErP:
Commission Regulation(EU) 424/2019
China CCC GB 17625.1-2012
GB 4943.1-2011
GB/T 9254.1-2021
China RoHS SJ/T-11364
GB/T 26572
North America NRTL UL 62368-1:2014
CAN/CSA-C22.2 NO.62368-1-14
US FCC FCC PART 15
Canada IC ICES-003
Japan VCCI VCCI 32-1
Global CB IEC 62368-1:2014
2022-11-11 256
Technical White Paper A Appendix
A Appendix
A.1 Chassis Label
The label information and location are for reference only. For details, see the actual product.
A.1.1 On the Front Top

Figure A-1 Chassis head label
1 Nameplate 2 Certificate
3 Quick access tag 4 SN
NOTE
For details, see A.2 Product SN.
5 Reserved space for custom label 6 Pressure-proof label

NOTE
This label indicates that do not place
any objects on top of a rack-mounted
2022-11-11 257
device.
A.1.1.1 Nameplate
Figure A-2 Nameplate example
Table A-1 Nameplate description

No. Description
1 Server Model
For details, see A.4 Nameplate.
2 Device names
3 Power Supply Requirements
4 Vendor Information
5 Authentication ID
A.1.1.2 Certificate
Figure A-3 Sample certificate of conformity
2022-11-11 258
Table A-2 Certificate of conformity description
No. Description
1 Order
2 No.
NOTE
For details, see Figure A-4 and Table A-3.
3 QC inspector
4 Production date
5 No. Barcode
Figure A-4 Sample certificate number
Table A-3 Certificate No. Description
No. Description
1 "P", fixed
2 "Z", fixed
3 ⚫ Y: Server
⚫ B: Semi-finished product of the whole machine.
⚫ N: Loose spare parts
4 "0", Reserved bit.
5 Year (2 digits).
6 Month (1 digit).
⚫ Digits 1 to 9 indicate January to September, respectively.
⚫ Letters A to C indicate October to December, respectively.
7 Day (1 digit).
⚫ Digits 1 to 9 indicate the 1st to 9th
⚫ Letters A to H indicate the 10th to 17th.
⚫ Letters J to N indicate the 18th to 22nd.
⚫ Letters P to Y indicate the 23rd to 31st
8 Hour (1 digit).
⚫ Digits 0 to 9 indicate 0 to 9:00.
2022-11-11 259
No. Description
⚫ Letters A to H indicate 10 to 17:00.
⚫ Letters J to N indicate 18 to 22:00.
⚫ Letters P to Q indicate 23 to 24:00.
9 Serial number (2 digits)
10 Manufacturing serial number (5 digits).
A.1.1.3 Sample Quick Access Tags
Figure A-5 Sample quick access tags
Table A-4 Quick access tab description
No. Description
1 IP address of the iBMC management network port

2 Subnet mask of the iBMC management network port
3 Default iBMC user name
4 Default iBMC password
5 Default BIOS password
6 Technical support website
7 P/N Code
8 QR Code
NOTE
Scan the QR code to obtain technical support resources.
2022-11-11 260
A.1.2 Chassis Tail Label

Figure A-6 Chassis tail label
For details about the warning label, see Server Safety Information.
A.1.3 Chassis Internal Label

Figure A-7 Chassis internal label
⚫ The quick guide is located on the inside of the chassis cover. It describes how to remove the
mainboard components, important components of the chassis, precautions, and QR codes of
technical resources. The pictures are for reference only. For details, see the actual product.
⚫ The quick guide is optional. For details, see the actual product.
A.2 Product SN
The serial number (SN) on the slide-out label plate uniquely identifies a device. The SN is
required when you contact technical support.
2022-11-11 261
Figure A-8 SN example
Table A-5 SN description
No. Description
1 ESN ID (two characters), which can only be 21.

2 Material ID (eight characters), that is, the processing code.
3 Vendor code (two characters), that is, the code of the processing place.
4 Year and month (two characters).
⚫ The first character indicates the year.
− Digits 1 to 9 indicate years 2001 to 2009, respectively.
− Letters A to H indicate years 2010 to 2017, respectively.
− Letters J to N indicate years 2018 to 2022, respectively.
− Letters P to Y indicate years 2023 to 2032, respectively.
NOTE
The years from 2010 are represented by upper-case letters excluding I, O, and Z
because the three letters are similar to the digits 1, 0, and 2.
⚫ The second character indicates the month.
− Digits 1 to 9 indicate January to September, respectively.
− Letters A to C indicate October to December, respectively.
5 Serial number (six digits).
6 RoHS compliance (one character). Y indicates RoHS compliant.
7 Internal model, that is, product name.
A.3 Operating Temperature Limitations

A.3.1 2288H V6-32DIMM
Table A-6 Operating temperature limitations
Configurat Maximum Maximum Maximum Maximum Maximum
ion Operating Operating Operating Operating Operating
Temperatu Temperatu Temperatu Temperatu Temperatu
re 30°C re 35°C re 40°C re 45°C re 50°C
(86°F) (95°F) (104°F) (113°F) (122°F)
2022-11-11 262

(86°F) (95°F) (104°F) (113°F) (122°F)
8 x 2.5-inch ⚫ All ⚫ V100/A4 ⚫ Rear ⚫ Only ⚫ Only

drive options 0/A16/A drives 4309Y/4 4309Y/4
pass-through supporte 10 GPU (includin 310/4310 310/4310
configuratio d. cards are g T/4314/4 T/4314/4
n not HDD/SS 316/5315 316/5315
supporte D/NVMe Y/5317/5 Y/5317/5
d. SSD/M.2 318N/53 318N/53
) are not 18S/5318 18S/5318
supporte Y/5320T/ Y/5320T/
d. 6338T 6338T
⚫ GPU processor processor
cards are s are s are
not supporte supporte
supporte d. d.
d. ⚫ DDR4/P ⚫ DIMMs
⚫ DDR4/P Mem of less
Mem memory than 64
memory modules GB per
modules whose module
whose capacity are not
capacity is 128 supporte
is 256 GB per d.
GB per module ⚫ Rear
module or larger drives
or larger are not (includin
are not supporte g
supporte d. HDD/SS
d. ⚫ Rear D/NVMe
drives SSD/M.2
(includin ) are not
g supporte
HDD/SS d.
D/NVMe ⚫ GPU
SSD/M.2 cards are
) are not not
supporte supporte
d. d.
⚫ GPU ⚫ NICs
cards are whose
not rate is
supporte greater
d. than 25
⚫ IB cards Gbit/s are
are not not
supporte supporte
d. d.
⚫ NICs ⚫ OCP 3.0
2022-11-11 263

(86°F) (95°F) (104°F) (113°F) (122°F)
whose network
rate is adapters
greater with
than 25 25Gbit/s
Gbit/s are rate or
not higher
supporte are not
d. supporte
⚫ CX5/CX d.
6 NICs ⚫ PCIe
are not RAID
supporte controller
d. cards are
⚫ OCP 3.0 not
network supporte
adapters d.
with ⚫ Supercap
25Gbit/s acitors
rate or are not
higher supporte
are not d.
supporte ⚫ PMem
d. memory
⚫ 9460-16i modules
RAID are not
controller supporte
cards are d.
not
supporte
d.
8 x 2.5-inch ⚫ All ⚫ All ⚫ Rear ⚫ Only ⚫ Not
drive + 11 x options options drives 4309Y/4 supporte
PCIe card supporte supporte (includin 310/4310 d.
configuratio d. d. g T/4314/4
n HDD/SS 316/5315
D/NVMe Y/5317/5
SSD/M.2 318N/53
) are not 18S/5318
supporte Y/5320T/
d. 6338T
⚫ GPU processor
cards are s are
not supporte
supporte d.
d. ⚫ DDR4/P
⚫ DDR4/P Mem
Mem memory
2022-11-11 264

(86°F) (95°F) (104°F) (113°F) (122°F)
memory modules
modules whose
whose capacity
capacity is 128
is 256 GB per
GB per module
module or larger
or larger are not
are not supporte
supporte d.
d. ⚫ Rear
drives
(includin
g
HDD/SS
D/NVMe
SSD/M.2
) are not
supporte
d.
⚫ GPU
cards are
not
supporte
d.
⚫ IB cards
are not
supporte
d.
⚫ NICs
whose
rate is
greater
than 25
Gbit/s are
not
supporte
d.
⚫ CX5/CX
6 NICs
are not
supporte
d.
⚫ OCP 3.0
network
adapters
with
2022-11-11 265

(86°F) (95°F) (104°F) (113°F) (122°F)
25Gbit/s
rate or
higher
are not
supporte
d.
⚫ 9460-16i
RAID
controller
cards are
not
supporte
d.
8 x 2.5-inch ⚫ All ⚫ All ⚫ Not ⚫ Not ⚫ Not
drives + 4 options options supporte supporte supporte
GPUs supporte supporte d. d. d.
configuratio d. d.
n
12 x ⚫ All ⚫ V100/A4 ⚫ Rear ⚫ Only ⚫ Not
2.5-inch options 0/A16/A drives 4309Y/4 supporte
drive supporte 10 GPU (includin 310/4310 d.
pass-through d. cards are g T/4314/4
configuratio not HDD/SS 316/5315
n (4 x supporte D/NVMe Y/5317/5
SAS/SATA d. SSD/M.2 318N/53
+8x ) are not 18S/5318
NVMe) supporte Y/5320T/
d. 6338T
⚫ GPU processor
cards are s are
not supporte
supporte d.
d. ⚫ DDR4/P
⚫ DDR4/P Mem
Mem memory
memory modules
modules whose
whose capacity
capacity is 128
is 256 GB per
GB per module
module or larger
or larger are not
are not supporte
supporte d.
d. ⚫ Rear
drives
2022-11-11 266

(86°F) (95°F) (104°F) (113°F) (122°F)
(includin
g
HDD/SS
D/NVMe
SSD/M.2
) are not
supporte
d.
⚫ GPU
cards are
not
supporte
d.
⚫ IB cards
are not
supporte
d.
⚫ NICs
whose
rate is
greater
than 25
Gbit/s are
not
supporte
d.
⚫ CX5/CX
6 NICs
are not
supporte
d.
⚫ OCP 3.0
network
adapters
with
25Gbit/s
rate or
higher
are not
supporte
d.
⚫ 9460-16i
RAID
controller
cards are
not
supporte
2022-11-11 267

(86°F) (95°F) (104°F) (113°F) (122°F)
d.
12 x ⚫ All ⚫ All ⚫ Not ⚫ Not ⚫ Not
2.5-inch (4 x options options supporte supporte supporte
SAS/SATA supporte supporte d. d. d.
+8x d. d.
NVMe) + 4
x GPU
configuratio
n
12 x ⚫ V100/A8 ⚫ Passive ⚫ 6334/634 ⚫ Not ⚫ Not
3.5-inch 00/A100/ cooled 2/6346/6 supporte supporte
drives with A40/A16 GPU 348/8351 d. d.
pass-through /A10 cards N/6354/8
configuratio GPU such as 358/8358
n. cards are V100/T4/ P/8360Y/
not A800/A1 8362/836
supporte 00/A40/ 8/8380
d. A16/A10 processor
⚫ DDR4/P /A2 are s are not
Mem not supporte
memory supporte d.
modules d. ⚫ GPU
whose ⚫ Built-in cards are
capacity drives are not
is 256 not supporte
GB per supporte d.
module d when ⚫ Built-in
or larger 6314U/6 drives are
are not 330/6338 not
supporte processor supporte
d. s and d.
other
⚫ Rear
processor
s of 205 drives are
W or not
higher supporte
power d.
are (includin
configure g
d. HDD/SS
⚫ 2.5-inch D/NVMe
rear SSD/M.2
drives ).
when ⚫ OCP 3.0
built-in network
drives are adapters
configure with
2022-11-11 268

(86°F) (95°F) (104°F) (113°F) (122°F)
d are not 100Gbit/
supporte s rate or
d. higher
⚫ OCP 3.0 are not
network supporte
adapters d.
with 2 x ⚫ DDR4/P
100GE Mem
ports are memory
not modules
supporte whose
d. capacity
⚫ DDR4/P is 128
Mem GB per
memory module
modules or larger
whose are not
capacity supporte
is 128 d.
GB per
module
or larger
are not
supporte
d.
⚫ I/O
module 3
supports
neither
NVMe
drives
nor
Kioxia
PM6
SAS
drives.
⚫ Rear
drive
modules
support
neither
WD
Vela-AP
(8 TB)
drives
nor
Vela-AX
(10 TB)
2022-11-11 269

(86°F) (95°F) (104°F) (113°F) (122°F)
NL SAS
drives.
EXP /A10 cards N/6354/8
n cards are V100/T4/ P/8360Y/
not A800/A1 8362/836
supporte 00/A40/ 8/8380
⚫ DDR4 /A2 are s are not
memory not supporte
modules supporte d.
whose d. ⚫ GPU
capacity ⚫ Built-in cards are
is 256 drives are not
GB per not supporte
module supporte d.
or larger d when ⚫ Built-in
are not 6314U/6 drives are
supporte 330/6338 not
d. processor supporte
s and d.
other
⚫ Rear
processor
s of 205 drives are
W or not
higher supporte
power d.
are (includin
configure g
d. HDD/SS
⚫ 2.5-inch D/NVMe
rear SSD/M.2
drives are ).
not ⚫ OCP 3.0
supporte network
d when adapters
built-in with
drives are 100Gbit/
configure s rate or
d. higher
⚫ OCP 3.0 are not
network supporte
adapters d.
with 2 x ⚫ DDR4/P
2022-11-11 270

(86°F) (95°F) (104°F) (113°F) (122°F)
100GE Mem
ports are memory
not modules
supporte whose
d. capacity
⚫ DDR4/P is 128
Mem GB per
memory module
modules or larger
whose are not
capacity supporte
is 128 d.
GB per
module
or larger
are not
supporte
d.
⚫ I/O
module 3
supports
neither
NVMe
drives
nor
Kioxia
PM6
SAS
drives.
⚫ Rear
drive
modules
support
neither
WD
Vela-AP
(8 TB)
drives
nor
Vela-AX
(10 TB)
NL SAS
drives.
20 x ⚫ GPU ⚫ GPU ⚫ 6334/634 ⚫ Not ⚫ Not
2.5-inch cards are cards are 2/6346/6 supporte supporte
drive not not 348/8351 d. d.
pass-through supporte supporte N/6354/8
2022-11-11 271

(86°F) (95°F) (104°F) (113°F) (122°F)
configuratio d. d. 358/8358
n (4 x ⚫ OCP 3.0 P/8360Y/
SAS/SATA network 8362/836
+ 16 x adapters 8/8380
NVMe) with 2 x processor
100GE s are not
ports are supporte
not d.
supporte ⚫ GPU
d. cards are
⚫ DDR4/P not
Mem supporte
memory d.
modules ⚫ Rear
whose drives are
capacity not
is 256 supporte
GB per d.
module (includin
or larger g
are not HDD/SS
supporte D/NVMe
d. SSD/M.2
).
⚫ OCP 3.0
network
adapters
with
100Gbit/
s rate or
higher
are not
supporte
d.
⚫ DDR4/P
Mem
memory
modules
whose
capacity
is 128
GB per
module
or larger
are not
supporte
d.
2022-11-11 272

(86°F) (95°F) (104°F) (113°F) (122°F)

pass-through /A10 cards N/6354/8
not A800/A1 8362/836
supporte 00/A40/ 8/8380
/A2 are s are not
not supporte
supporte d.
d. ⚫ GPU
⚫ OCP 3.0 cards are
network not
adapters supporte
with 2 x d.
100GE ⚫ Rear
ports are drives are
not not
supporte supporte
d. d.
⚫ DDR4/P (includin
Mem g
memory HDD/SS
modules D/NVMe
whose SSD/M.2
capacity ).
is 256
⚫ OCP 3.0
GB per
module network
or larger adapters
are not with
supporte 100Gbit/
d. s rate or
higher
are not
supporte
d.
⚫ DDR4/P
Mem
memory
modules
whose
capacity
is 128
GB per
module
2022-11-11 273

(86°F) (95°F) (104°F) (113°F) (122°F)
or larger
are not
supporte
d.
24 x ⚫ GPU ⚫ GPU ⚫ 6334/634 ⚫ Not ⚫ Not
2.5-inch cards are cards are 2/6346/6 supporte supporte
NVMe drive not not 348/8351 d. d.
configuratio supporte supporte N/6354/8
n d. d. 358/8358
⚫ OCP 3.0 P/8360Y/
network 8362/836
adapters 8/8380
with 2 x processor
100GE s are not
ports are supporte
not d.
supporte ⚫ GPU
d. cards are
⚫ DDR4/P not
Mem supporte
memory d.
modules ⚫ Rear
whose drives are
capacity not
is 256 supporte
GB per d.
module (includin
or larger g
are not HDD/SS
supporte D/NVMe
d. SSD/M.2
).
⚫ OCP 3.0
network
adapters
with
100Gbit/
s rate or
higher
are not
supporte
d.
⚫ DDR4/P
Mem
memory
modules
whose
2022-11-11 274

(86°F) (95°F) (104°F) (113°F) (122°F)
capacity
is 128
GB per
module
or larger
are not
supporte
d.
EXP /A10 cards N/6354/8
not A800/A1 8362/836
supporte 00/A40/ 8/8380
/A2 are s are not
not supporte
supporte d.
d. ⚫ GPU
⚫ OCP 3.0 cards are
network not
adapters supporte
with 2 x d.
100GE ⚫ Rear
ports are drives are
not not
supporte supporte
d. d.
⚫ DDR4/P (includin
Mem g
memory HDD/SS
modules D/NVMe
whose SSD/M.2
capacity ).
is 256
⚫ OCP 3.0
GB per
module network
or larger adapters
are not with
supporte 100Gbit/
d. s rate or
higher
are not
supporte
d.
⚫ DDR4/P
2022-11-11 275

(86°F) (95°F) (104°F) (113°F) (122°F)
Mem
memory
modules
whose
capacity
is 128
GB per
module
or larger
are not
supporte
d.
⚫ When a single fan is faulty, the highest operating temperature is 5°C (9°F) lower than the rated
value.
⚫ When a single fan is faulty, the system performance may be affected.
⚫ When the 6342/6348/8351N/8358/8358P/8360Y/8362/8368/8380 processors are configured, I/O
modules 1, 2, and 3 do not support Tesla T4 GPU cards, and I/O module 3 does not support HDDs.
⚫ In 12 x 3.5" drives pass-through configuration and 12 x 3.5" drives EXP configuration, the processor
TDP is required to be no more than 205 W and the total capacity of DIMMs configured no more than
2048 GB when IO module 3 is configured with 4 x 2.5" NVMe drives module.
⚫ It is recommended that servers be deployed at an interval of 1U to reduce server noise and improve
server energy efficiency.
⚫ 8368Q 38c 270 W 2.6 GHz liquid-cooled processors are not supported.
⚫ When the ring temperature is 50°C (122°F), the CPU heat sink must be configured with a 2 U heat
pipe heat sink.
A.3.2 2288H V6-16DIMM

Table A-7 Operating temperature limitations
Configuration Maximum Maximum Maximum Maximum
Operating Operating Operating Operating
Temperature Temperature Temperature Temperature
30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
8 x 2.5-inch ⚫ All options ⚫ All options ⚫ Rear drives ⚫ Only

drive supported. supported. (including 4309Y/4310
pass-through HDD/SSD/P /4310T/4314
configuration CIe /4316/5315
SSD/NVMe Y/5317/531
SSD/M.2) 8N/5318S/5
are not 318Y/5320T
supported. /6338T
⚫ T4 GPU processors
2022-11-11 276

30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
cards are not are
supported. supported.
⚫ RDIMMs of
less than 64
GB per
module are
not
supported.
⚫ Rear drives
(including
HDD/SSD/P
CIe
SSD/NVMe
SSD/M.2)
are not
supported.
⚫ T4 GPU
cards are not
supported.
⚫ IB cards are
not
supported.
⚫ NICs whose
rate is
greater than
25 Gbit/s are
not
supported.
⚫ CX5/CX6
NICs are not
supported.
⚫ OCP 3.0
network
adapters
with
25Gbit/s
rate or
higher are
not
supported.
⚫ PCIe RAID
controller
card is not
supported.
8 x 3.5-inch ⚫ All options ⚫ T4 GPU ⚫ 6334/6342/6 ⚫ Not
drive supported. cards are not 346/6348/83 supported.
pass-through 51N/6354/8
2022-11-11 277

30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
configuration supported. 358/8358P/8
⚫ I/O module 360Y/8368/
3 not 8380
supported processors
NVMe are not
drives. supported.
⚫ T4 GPU
cards are not
supported.
⚫ Built-in
drives are
not
supported.
⚫ Rear drives
are not
supported.
(including
HDD/SSD/P
CIe
SSD/NVMe
SSD/M.2).
⚫ OCP 3.0
network
adapters
with
100Gbit/s
rate or
higher are
not
supported.
⚫ DDR4
memory
modules
whose
capacity is
128 GB per
module or
larger are
not
supported.
drives with supported. cards are not 346/6348/83 supported.
pass-through supported. 51N/6354/8
configuration. ⚫ I/O module 358/8358P/8
3 not 360Y/8368/
supported 8380
NVMe processors
2022-11-11 278

30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
drives. are not
supported.
⚫ T4 GPU
cards are not
supported.
⚫ Built-in
drives are
not
supported.
⚫ Rear drives
are not
supported.
(including
HDD/SSD/P
CIe
SSD/NVMe
SSD/M.2).
⚫ OCP 3.0
network
adapters
with
100Gbit/s
rate or
higher are
not
supported.
⚫ DDR4
memory
modules
whose
capacity is
128 GB per
module or
larger are
not
supported.
EXP supported. 51N/6354/8
configuration ⚫ Built-in 358/8358P/8
drives are 360Y/8368/
not 8380
supported processors
when are not
6314U/6330 supported.
/6338 ⚫ T4 GPU
processors cards are not
2022-11-11 279

30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
and other supported.
processors ⚫ Built-in
of 205 W or drives are
higher not
power are supported.
configured.
⚫ Rear drives
⚫ 2.5-inch rear are not
drives are supported.
not
supported (including
when HDD/SSD/P
built-in CIe
drives are SSD/NVMe
configured. SSD/M.2).
⚫ OCP 3.0
⚫ I/O module
3 not network
supported adapters
NVMe with
drives. 100Gbit/s
rate or
higher are
not
supported.
⚫ DDR4
memory
modules
whose
capacity is
128 GB per
module or
larger are
not
supported.
EXP supported. 51N/6354/8
configuration 358/8358P/8
360Y/8368/
8380
processors
are not
supported.
⚫ T4 GPU
cards are not
supported.
⚫ Rear drives
are not
supported.
2022-11-11 280

30°C (86°F) 35°C (95°F) 40°C (104°F) 45°C (113°F)
(including
HDD/SSD/P
CIe
SSD/NVMe
SSD/M.2).
⚫ OCP 3.0
network
adapters
with
100Gbit/s
rate or
higher are
not
supported.
⚫ When a single fan is faulty, the highest operating temperature is 5°C (9°F) lower than the rated
value.
⚫ When a single fan is faulty, the system performance may be affected.
⚫ When the 6342/6348/8351N/8358/8358P/8360Y/8368/8380 processors are configured, I/O modules
do not support Tesla T4 GPU cards, and I/O module 3 does not support HDDs.
⚫ In 12 x 3.5-inch drives pass-through configuration and 12 x 3.5-inch drives EXP configuration, the
processor TDP is required to be no more than 205 W and the total capacity of DIMMs configured no
more than 2048 GB when IO module 3 is configured with 4 x 2.5-inch NVMe drives module.
⚫ It is recommended that servers be deployed at an interval of 1U to reduce server noise and improve
server energy efficiency.
⚫ 8368Q 38c 270 W 2.6 GHz liquid-cooled processors are not supported.
A.4 Nameplate
Certified Model Usage Restrictions
H22H-06 Global
A.5 RAS Features

The server supports a variety of Reliability, Availability, and Serviceability (RAS) features.
You can configure these features for better performance.
For details about the RAS features, see FusionServer Ice Lake Platform RAS Technical White
Paper.
2022-11-11 281
A.6 Sensor List

A.6.1 2288H V6-32DIMM
Sensor Description Component
Inlet Temp Air inlet temperature Right mounting ear

Outlet Temp Air outlet temperature BMC card
PCH Temp PCH bridge temperature Mainboard
CPUN Core Rem CPU core temperature CPUN
N indicates the CPU
number. The value is 1 or 2.
CPUN DTS Difference between the CPUN
real-time CPU temperature N indicates the CPU
and the core CPU number. The value is 1 or 2.
temperature threshold
CPUN Margin Difference between the CPUN
and the CPU Tcontrol number. The value is 1 or 2.
threshold
CPUN VDDQ Temp CPU VDDQ temperature Mainboard
N indicates the CPU
CPUN VRD Temp CPU VRD temperature Mainboard
N indicates the CPU
CPUN MEM Temp CPU memory module Memory module
temperature corresponding to CPU N
N indicates the CPU
CPUN 12V 12 V voltage supplied by the Mainboard
mainboard to the CPU N indicates the CPU
Riser 12V 12 V voltage supplied by the Mainboard
mainboard to the riser card
Disk BP 12V 12 V voltage supplied by the Mainboard
mainboard to the drive
backplane
CPUN DDR VDDQ 1.2 V memory module Mainboard
voltage N indicates the CPU
CPUN DDR VDDQ2 1.2 V memory module Mainboard
2022-11-11 282

CPUN VCCIN CPU VCCIN voltage Mainboard
N indicates the CPU
CPUN VSA CPU VSA voltage Mainboard
N indicates the CPU
CPUN P1V8 CPU P1V8 voltage Mainboard
N indicates the CPU
CPUN VCCIO CPU VCCIO voltage Mainboard
N indicates the CPU
CPUN VCCANA CPU VCCANA voltage Mainboard
N indicates the CPU
FANN Speed Fan speed Fan module N
FANN F Speed N indicates the fan module
number. The value ranges
FANN R Speed from 1 to 4.
Power Server input power Power supply unit (PSU)

PSN VIN PSU N input voltage PSU N
N indicates the PSU
Disks Temp Maximum drive temperature Drive
PowerN PSU input power PSU N
N indicates the PSU
PCH Status PCH chip fault diagnosis Mainboard
health status
CPUN UPI Link CPU UPI link fault Mainboard or CPU N
diagnosis health status N indicates the CPU
CPUN Prochot CPU Prochot CPUN
N indicates the CPU
CPUN Status CPU status CPUN
N indicates the CPU
2022-11-11 283

CPUN Memory Status of the memory Memory module
corresponding to the CPU corresponding to CPU N
N indicates the CPU
FANN Status Fan fault status Fan module N
FANN F Status N indicates the fan module
FANN R Status from 1 to 4.
DIMMN DIMM status DIMM N

N indicates the DIMM slot
number.
RTC Battery RTC battery status. An RTC battery on the
alarm is generated when the mainboard
voltage is lower than 1 V.
PCIE Status PCIe status error PCIe card
Power Button Power button pressed Mainboard and power
button
Watchdog2 Watchdog Mainboard
Mngmnt Health Management subsystem Management modules
health status
UID Button UID button status Mainboard
PwrOk Sig. Drop Voltage dip status Mainboard
PwrOn TimeOut Power-on timeout Mainboard
PwrCap Status Power capping status Mainboard
HDD Backplane Hardware presence Drive backplane
HDD BP Status Drive backplane health Drive backplane
status
RiserN Card Hardware presence Riser card N
N indicates the riser card
slot number. The value
ranges from 1 to 3.
SAS Cable Hardware presence SAS cable on the mainboard
FANN Presence Fan presence Fan module N
FANN F Presence N indicates the fan module
FANN R Presence from 1 to 4.
RAID Presence RAID presence RAID controller card
2022-11-11 284
LCD Status LCD health status LCD

LCD Presence LCD presence LCD
PS Redundancy Redundancy failure due to Power supply unit (PSU)
PSU removal
PSN Status PSU status PSU N
N indicates the PSU
PSN Fan Status PSU fan fault status PSU N
N indicates the PSU
PSN Temp Status PSU presence PSU N
N indicates the PSU
DISK$ Disk status Drive
PCIe RAID$ Temp Temperature of the PCIe PCIe RAID controller card
RAID controller card
M2 Temp(PCIe$) Maximum temperature of all PCIe RAID controller card
M.2 drives of the RAID
controller card
RAID Temp Temperature of the RAID RAID controller card
controller card
RAID Status RAID controller card health RAID controller card
status
RAID PCIE ERR Health status of the RAID RAID controller card
controller card in fault
diagnosis
IB$ Temp IB NIC temperature IB card
PCIe$ OP Temp PCIe card optical module PCIe card
temperature
PCIe NIC$ Temp PCIe card chip temperature PCIe card
PCIe FC$ Temp PCIe card chip temperature PCIe card
RAID Card BBU RAID controller card BBU BBU supercapacitor of
FPGA$ Temp FPGA card temperature PCIe card
FPGA$ DDR Temp FPGA card memory PCIe card
temperature
FPGA$ Power FPGA card power PCIe card
2022-11-11 285
FPGA$ OP Temp FPGA card optical module PCIe card

temperature
PCIe$ Inlet Temp PCIe smart card air inlet PCIe smart cards
temperature
PCIe$ Cpu Temp PCIe smart card CPU PCIe smart cards
temperature
1711 Core Temp Core temperature of the BMC card
BMC management chip
PS$ IIn PSU input current Power supply unit (PSU)
PS$ IOut PSU output current Power supply unit (PSU)
PS$ Pout PSU output power Power supply unit (PSU)
PS$ Temp Maximum internal Power supply unit (PSU)
temperature of the PSU
PS$ Inlet Temp PSU air inlet temperature Power supply unit (PSU)
AreaIntrusion Listening to the unpacking Mainboard
action
OCP$ OP Temp OCP card optical module OCP 3.0 Network Adapters
temperature
OCP$ Temp OCP card chip temperature OCP 3.0 Network Adapters
CPUN PMem Temp CPU PMem module PMem module
N indicates the CPU
Riser$ Temp Riser card temperature Riser cards
Disk BP$ Temp Drive backplane Drive backplane
temperature
SSD Max Temp Maximum SSD temperature SSD
RAID BBU Temp RAID controller card Supercapacitor of the RAID
capacitor temperature controller card
PCIe$ Temp PCIe card chip temperature PCIe card
PCIe$ Card BBU BBU status of the PCIe PCIe RAID controller card
GPU$ Power GPU card power GPU cards
GPU$ Temp GPU temperature GPU cards
GPU$ MINI Temp Mini chip temperature of the GPU cards
GPU card
2022-11-11 286
GPU$ DDR Temp DDR chip temperature of GPU cards

the GPU card
GPU$ HBM Temp HBM chip temperature of GPU cards
the GPU card
System Notice Hot restart reminder and N/A
fault diagnosis program
information collection
System Error System suspension or
restart. Check the
background logs.
ACPI State ACPI status
SysFWProgress Software process and
system startup errors
SysRestart Cause of system restart
Boot Error Boot error
CPU Usage CPU usage.
Memory Usage Memory usage.
BMC Boot Up BMC startup events
BMC Time Hopping Time hopping
NTP Sync Failed NTP synchronization failure
and recovery events
SEL Status SEL full or clearing events
Op. Log Full Operation log full or
clearing events
Sec. Log Full Security log full or clearing
events
Host Loss System monitoring software
(BMA) link loss detection
ProductID Status Product identification status
OAMPort1_$ Link Network port OAM link
status
OAMPort2_$ Link Network port OAM link
status
2022-11-11 287
A.6.2 2288H V6-16DIMM

Inlet Temp Air inlet temperature Mainboard

Outlet Temp Air outlet temperature BMC card
PCH Temp PCH bridge temperature Mainboard
CPUN Core Rem CPU core temperature CPUN
N indicates the CPU
CPUN DTS Difference between the CPUN
and the core CPU number. The value is 1 or 2.
temperature threshold
CPUN Margin Difference between the CPUN
and the CPU Tcontrol number. The value is 1 or 2.
threshold
CPUN VDDQ Temp CPU VDDQ temperature Mainboard
N indicates the CPU
CPUN VRD Temp CPU VRD temperature Mainboard
N indicates the CPU
CPUN MEM Temp CPU memory module Memory module
N indicates the CPU
CPUN 12V 12 V voltage supplied by the Mainboard
mainboard to the CPU N indicates the CPU
Riser 12V 12 V voltage supplied by the Mainboard
mainboard to the riser card
CPUN DDR VDDQ 1.2 V memory module Mainboard
CPUN DDR VDDQ2 1.2 V memory module Mainboard
CPUN VCCIN CPU VCCIN voltage Mainboard
N indicates the CPU
2022-11-11 288
CPUN VSA CPU VSA voltage Mainboard

N indicates the CPU
CPUN P1V8 CPU P1V8 voltage Mainboard
N indicates the CPU
CPUN VCCIO CPU VCCIO voltage Mainboard
N indicates the CPU
CPUN VCCANA CPU VCCANA voltage Mainboard
N indicates the CPU
FANN Speed Fan speed Fan module N
N indicates the fan module
from 1 to 4.
Power Server input power Power supply unit (PSU)
PSN VIN PSU N input voltage PSU N
N indicates the PSU
Disks Temp Maximum drive temperature Drive
PowerN PSU input power PSU N
N indicates the PSU
PCH Status PCH chip fault diagnosis Mainboard
health status
CPUN UPI Link CPU UPI link fault Mainboard or CPU N
diagnosis health status N indicates the CPU
CPUN Prochot CPU Prochot CPUN
N indicates the CPU
CPUN Status CPU status CPUN
N indicates the CPU
CPUN Memory Status of the memory Memory module
corresponding to the CPU corresponding to CPU N
N indicates the CPU
2022-11-11 289
FANN Status Fan fault status Fan module N

from 1 to 4.
DIMMN DIMM status DIMM N
N indicates the DIMM slot
number.
RTC Battery RTC battery status. An RTC battery on the
alarm is generated when the mainboard
voltage is lower than 1 V.
PCIE Status PCIe status error PCIe card
Power Button Power button pressed Mainboard and power
button
Watchdog2 Watchdog Mainboard
Mngmnt Health Management subsystem Management modules
health status
UID Button UID button status Mainboard
PwrOk Sig. Drop Voltage dip status Mainboard
PwrOn TimeOut Power-on timeout Mainboard
PwrCap Status Power capping status Mainboard
HDD Backplane Hardware presence Drive backplane
HDD BP Status Drive backplane health Drive backplane
status
Riser3 Card Hardware presence Riser cards
SAS Cable Hardware presence SAS cable on the mainboard
FANN Presence Fan presence Fan module N
from 1 to 4.
RAID Presence RAID presence RAID controller card
LCD Status LCD health status LCD
LCD Presence LCD presence LCD
PS Redundancy Redundancy failure due to Power supply unit (PSU)
PSU removal
PSN Status PSU status PSU N
N indicates the PSU
2022-11-11 290
PSN Fan Status PSU fan fault status PSU N

N indicates the PSU
PSN Temp Status PSU presence PSU N
N indicates the PSU
DISK$ Disk status Drive
PCIe RAID$ Temp Temperature of the PCIe PCIe RAID controller card
M2 Temp(PCIe$) Maximum temperature of all PCIe RAID controller card
M.2 drives of the RAID
controller card
RAID Temp Temperature of the RAID RAID controller card
controller card
RAID Status RAID controller card health RAID controller card
status
RAID PCIE ERR Health status of the RAID RAID controller card
controller card in fault
diagnosis
IB$ Temp IB NIC temperature IB card
PCIe$ OP Temp PCIe card optical module PCIe card
temperature
PCIe NIC$ Temp PCIe card chip temperature PCIe card
PCIe FC$ Temp PCIe card chip temperature PCIe card
RAID Card BBU RAID controller card BBU BBU supercapacitor of
FPGA$ Temp FPGA card temperature PCIe card
FPGA$ DDR Temp FPGA card memory PCIe card
temperature
FPGA$ Power FPGA card power PCIe card
FPGA$ OP Temp FPGA card optical module PCIe card
temperature
PCIe$ Inlet Temp PCIe smart card air inlet PCIe smart cards
temperature
PCIe$ Cpu Temp PCIe smart card CPU PCIe smart cards
temperature
1711 Core Temp Core temperature of the BMC card
BMC management chip
2022-11-11 291
PS$ IIn PSU input current Power supply unit (PSU)

PS$ IOut PSU output current Power supply unit (PSU)
PS$ Pout PSU output power Power supply unit (PSU)
PS$ Temp Maximum internal Power supply unit (PSU)
temperature of the PSU
PS$ Inlet Temp PSU air inlet temperature Power supply unit (PSU)
AreaIntrusion Listening to the unpacking Mainboard
action
OCP$ OP Temp OCP card optical module OCP 3.0 Network Adapters
temperature
OCP$ Temp OCP card chip temperature OCP 3.0 Network Adapters
Riser$ Temp Riser card temperature Riser cards
Disk BP$ Temp Drive backplane Drive backplane
temperature
SSD Max Temp Maximum SSD temperature SSD
RAID BBU Temp RAID controller card Supercapacitor of the RAID
capacitor temperature controller card
PCIe$ Temp PCIe card chip temperature PCIe card
PCIe$ Card BBU BBU status of the PCIe PCIe RAID controller card
NIC1 Presence Hardware presence Mainboard
SYS 3.3V Mainboard 3.3 V voltage Mainboard
SYS 5V Mainboard 5.0 V voltage Mainboard
V_STBY_1V8 Southbridge standby 1.8 V Mainboard
voltage of the mainboard
V_STBY_5V0 Mainboard standby 5.0 V Mainboard
voltage
Stby 3V3 Mainboard standby 3.3 V Mainboard
voltage
PCH VPVNN PCH VPVNN voltage Mainboard
PCH VOLT PCH 1.05 V voltage Mainboard
PCIe Slot 3V3 Riser card 3.3 V voltage Mainboard
SYS 5V HDD 5 V voltage of the rear Mainboard
backplane
System Notice Hot restart reminder and N/A
fault diagnosis program
2022-11-11 292

information collection
System Error System suspension or
restart. Check the
background logs.
ACPI State ACPI status
SysFWProgress Software process and
system startup errors
SysRestart Cause of system restart
Boot Error Boot error
CPU Usage CPU usage.
Memory Usage Memory usage.
BMC Boot Up BMC startup events
BMC Time Hopping Time hopping
NTP Sync Failed NTP synchronization failure
and recovery events
SEL Status SEL full or clearing events
Op. Log Full Operation log full or
clearing events
Sec. Log Full Security log full or clearing
events
Host Loss System monitoring software
(BMA) link loss detection
ProductID Status Product identification status
2022-11-11 293
Technical White Paper B Glossary
B Glossary
B.1 A-E
B
BMC The baseboard management controller (BMC) complies with
the Intelligent Platform Management Interface (IPMI). It
collects, processes, and stores sensor signals, and monitors the
operating status of components. The BMC provides the
hardware status and alarm information about the managed
objects to the upper-level management system, so that the
management system can manage the objects.
E
ejector lever A part on the panel of a device used to facilitate installation or
removal of the device.
Ethernet A baseband local area network (LAN) architecture developed
by Xerox Corporation by partnering with Intel and DEC.
Ethernet uses the Carrier Sense Multiple Access/Collision
Detection (CSMA/CD) access method and allows data transfer
over various cables at 10 Mbit/s. The Ethernet specification is
the basis for the IEEE 802.3 standard.
B.2 F-J
G
Gigabit Ethernet (GE) An extension and enhancement of traditional shared media
Ethernet standards. It is compatible with 10 Mbit/s and 100
Mbit/s Ethernet and complies with IEEE 802.3z standards.
2022-11-11 294
H
hot swap Replacing or adding components without stopping or shutting
down the system.
B.3 K-O
K
KVM A hardware device that provides public video, keyboard and
mouse (KVM).
B.4 P-T
P
panel An external component (including but not limited to ejector
levers, indicators, and ports) on the front or rear of the server.
It seals the front and rear of the chassis to ensure optimal
ventilation and electromagnetic compatibility (EMC).
Peripheral A computer bus PCI, which uses the existing PCI
Component programming concepts and communication standards, but
Interconnect Express builds a faster serial communication system. Intel is the main
(PCIe) sponsor for PCIe. PCIe is used only for internal
interconnection. A PCI system can be transformed to a PCIe
system by modifying the physical layer instead of software.
PCIe delivers a faster speed and can replace almost all AGP
and PCI buses.
R
redundancy A mechanism that allows a backup device to automatically
take over services from a faulty device to ensure uninterrupted
running of the system.
redundant array of A storage technology that combines multiple physical drives
independent disks into a logical unit for the purposes of data redundancy and
(RAID) performance improvement.
S
server A special computer that provides services for clients over a
network.
2022-11-11 295
system event log Event records stored in the system used for subsequent fault
(SEL) diagnosis and system recovery.
B.5 U-Z
U
U A unit defined in International Electrotechnical Commission
(IEC) 60297-1 to measure the height of a cabinet, chassis, or
subrack. 1 U = 44.45 mm
UltraPath A point-to-point processor interconnect developed by Intel.
Interconnect (UPI)
2022-11-11 296
Technical White Paper C Acronyms and Abbreviations
C Acronyms and Abbreviations
C.1 A-E
A
AC alternating current
AES Advanced Encryption Standard New Instruction Set
ARP Address Resolution Protocol
AVX Advanced Vector Extensions
B
BBU backup battery unit
BIOS Basic Input/Output System
BMC baseboard management controller
C
CCC China Compulsory Certification
CD calendar day
CE Conformite Europeenne
CIM Common Information Model
CLI command-line interface
2022-11-11 297
D
DC direct current
DDR4 Double Data Rate 4
DDDC double device data correction
DEMT Dynamic Energy Management Technology
DIMM dual in-line memory module
DRAM dynamic random-access memory
DVD digital video disc
E
ECC error checking and correcting
ECMA European Computer Manufacturer Association
EDB Execute Disable Bit
EID Enclosure ID
EN European Efficiency
ERP enterprise resource planning
ETS European Telecommunication Standards
C.2 F-J
F
FB-DIMM Fully Buffered DIMM
FC Fiber Channel
FCC Federal Communications Commission
FCoE Fibre Channel over Ethernet
FTP File Transfer Protocol
G
GE Gigabit Ethernet
GPIO General Purpose Input/Output
2022-11-11 298
GPU graphics processing unit
H
HA high availability
HDD hard disk drive
HPC high-performance computing
HTTP Hypertext Transfer Protocol
HTTPS Hypertext Transfer Protocol Secure
I
iBMC intelligent baseboard management controller
IC Industry Canada
ICMP Internet Control Message Protocol
IDC Internet Data Center
IEC International Electrotechnical Commission
IEEE Institute of Electrical and Electronics Engineers
IGMP Internet Group Message Protocol
IOPS input/output operations per second
IP Internet Protocol
IPC Intelligent Power Capability
IPMB Intelligent Platform Management Bus
IPMI Intelligent Platform Management Interface
C.3 K-O
K
KVM keyboard, video, and mouse
2022-11-11 299
L
LC Lucent Connector
LRDIMM load-reduced dual in-line memory module
LED light emitting diode
LOM LAN on motherboard
M
MAC media access control
MMC module management controller
N
NBD next business day
NC-SI Network Controller Sideband Interface
O
OCP Open Compute Project
C.4 P-T
P
PCIe Peripheral Component Interconnect Express
PDU power distribution unit
PHY physical layer
PMBUS power management bus
POK Power OK
PWM pulse-width modulation
PXE Preboot Execution Environment
2022-11-11 300
R
RAID redundant array of independent disks
RAS reliability, availability and serviceability
RDIMM registered dual in-line memory module
REACH Registration Evaluation and Authorization of Chemicals
RJ45 registered jack 45
RoHS Restriction of the Use of Certain Hazardous Substances in

Electrical and Electronic Equipment
S
SAS Serial Attached Small Computer System Interface
SATA Serial Advanced Technology Attachment
SCM supply chain management
SDDC single device data correction
SERDES serializer/deserializer
SGMII serial gigabit media independent interface
SMI serial management interface
SMTP Simple Mail Transfer Protocol
SNMP Simple Network Management Protocol
SOL serial over LAN
SONCAP Standards Organization of Nigeria-Conformity Assessment

Program
SSD solid-state drive
SSE Streaming SIMD Extension
T
TACH tachometer signal
TBT Turbo Boost Technology
TCG Trusted Computing Group
TCM trusted cryptography module
TCO total cost of ownership
2022-11-11 301
TDP thermal design power
TELNET Telecommunication Network Protocol
TET Trusted Execution Technology
TFM TransFlash module
TFTP Trivial File Transfer Protocol
TOE TCP offload engine
TPM trusted platform module
C.5 U-Z
U
UDIMM unbuffered dual in-line memory module
UEFI Unified Extensible Firmware Interface
UID unit identification light
UL Underwriter Laboratories Inc.
UPI UltraPath Interconnect
USB Universal Serial Bus
V
VCCI Voluntary Control Council for Interference by Information
Technology Equipment
VGA Video Graphics Array
VLAN virtual local area network
VRD voltage regulator-down
VROC Virtual RAID on CPU
W
WEEE waste electrical and electronic equipment
WSMAN Web Service Management
2022-11-11 302

FusionServer 2288H V6 Server Technical White Paper PDF

Uploaded by

Document Informationclick to expand document information

Document Informationclick to expand document information

Copyright:

Available Formats

FusionServer 2288H V6 Server Technical White Paper PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FusionServer 2288H V6 Server Technical White Paper PDF

Uploaded by

Copyright:

Available Formats

FusionServer 2288H V6 Server

Technical White Paper

xFusion Digital Technologies Co., Ltd.

Trademarks and Permissions

xFusion Digital Technologies Co., Ltd.

About This Document .................................................................................................................. vii

4 Logical Structure ......................................................................................................................... 17

5 Hardware Description ................................................................................................................ 20

5.1.4.2.3 Memory Compatibility ...................................................................................................................................... 49

5.2.4.1.5 Memory Installation Positions ......................................................................................................................... 180

6 Product Specifications .............................................................................................................. 234

7 Software and Hardware Compatibility ................................................................................ 248

9 System Management ................................................................................................................ 253

B Glossary ...................................................................................................................................... 294

About This Document

Indicates a hazard with a high level of risk which, if not

07 2022-11-11 ⚫ Updated 5.1.5.1 Drive Configurations and

FusionServer 2288H V6 (2288H V6) is a new-generation 2U 2-socket rack server designed

Figure 1-1 2288H V6-32DIMM with 12 x 3.5" drives (example)

Figure 1-2 2288H V6-16DIMM with 12 x 3.5" drives (example)

Performance and Scalability

Availability and Serviceability

Manageability and Security

3.1 2288H V6-32DIMM

3.1 2288H V6-32DIMM

1 I/O module 1 2 I/O module 2

7 Air duct 8 Intrusion sensor

9 Front-drive backplane 10 Left mounting ear plate

3.2 2288H V6-16DIMM

1 I/O module 1 2 PCIe Card

9 Front-drive backplane 10 Left mounting ear plate

4.1 2288H V6-32DIMM

4.1 2288H V6-32DIMM

4.2 2288H V6-16DIMM

5.1 2288H V6-32DIMM

5.1 2288H V6-32DIMM

Figure 5-1 Front view

1 Drive 2 (Optional) Built-in DVD

⚫ 12 x 2.5" drive configuration (4 x SAS/SATA + 8 x NVMe)

Figure 5-2 Front view

1 Drive 2 Slide-out label plate (with an

⚫ 12 x 3.5" drive configuration

Figure 5-3 Front view

1 Drive 2 Slide-out label plate (with an

⚫ 20 x 2.5" drive configuration (4 x SAS/SATA + 16 x NVMe)

Figure 5-4 Front view

1 Drive 2 Slide-out label plate (with an

⚫ 24 x 2.5" drive configuration

Figure 5-5 Front view

1 Drive 2 Slide-out label plate (with an

⚫ 25 x 2.5" drive configuration

Figure 5-6 Front view

1 Drive 2 Slide-out label plate (with an

5.1.1.2 Indicators and Buttons

Indicator and Button Positions

Figure 5-7 Indicators and buttons on the front panel

1 Fault diagnosis LED 2 Power button/indicator