Scribd Logo
Upload

Welcome to Scribd!

  • 63 views

    TLB Modbus TCP Digital Amplifier en PDF

    Uploaded by

    Audi Tresnawan
    This document describes a TLB digital/analog weight transmitter with an RS485 serial port. It has a 6-digit LED display, 6 signaling LEDs, and 4 buttons for calibration. It can communicate via Modbus RTU, ASCII, or continuous protocols. It has 3 relay outputs, 2 digital inputs, and is compatible with multiple fieldbus protocols like CANopen, DeviceNet, PROFIBUS DP, Ethernet/IP, PROFINET IO, EtherCAT, and POWERLINK. It has certifications and technical features. The transmitter's main functions are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    TLB Modbus TCP Digital Amplifier en PDF

    Uploaded by

    Audi Tresnawan
    63 views4 pages
    This document describes a TLB digital/analog weight transmitter with an RS485 serial port. It has a 6-digit LED display, 6 signaling LEDs, and 4 buttons for calibration. It can communicate via Modbus RTU, ASCII, or continuous protocols. It has 3 relay outputs, 2 digital inputs, and is compatible with multiple fieldbus protocols like CANopen, DeviceNet, PROFIBUS DP, Ethernet/IP, PROFINET IO, EtherCAT, and POWERLINK. It has certifications and technical features. The transmitter's main functions are also described.

    Original Title

    tlb-modbus-tcp-digital-amplifier-en.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes a TLB digital/analog weight transmitter with an RS485 serial port. It has a 6-digit LED display, 6 signaling LEDs, and 4 buttons for calibration. It can communicate via Modbus RTU, ASCII, or continuous protocols. It has 3 relay outputs, 2 digital inputs, and is compatible with multiple fieldbus protocols like CANopen, DeviceNet, PROFIBUS DP, Ethernet/IP, PROFINET IO, EtherCAT, and POWERLINK. It has certifications and technical features. The transmitter's main functions are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    63 views4 pages

    TLB Modbus TCP Digital Amplifier en PDF

    Uploaded by

    Audi Tresnawan
    This document describes a TLB digital/analog weight transmitter with an RS485 serial port. It has a 6-digit LED display, 6 signaling LEDs, and 4 buttons for calibration. It can communicate via Modbus RTU, ASCII, or continuous protocols. It has 3 relay outputs, 2 digital inputs, and is compatible with multiple fieldbus protocols like CANopen, DeviceNet, PROFIBUS DP, Ethernet/IP, PROFINET IO, EtherCAT, and POWERLINK. It has certifications and technical features. The transmitter's main functions are also described.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    TLB

    Digital / Analog weight Transmitter RS485

    TLB
    Digital / Analog weight Transmitter RS485

    DESCRIPTION

     Weight transmittersuitable for back panel mounting on Omega/DIN rail.


     Space-saving vertical shape.
     Dimensions: 25x115x120 mm.
     6-digit semi-alphanumeric red LED display (8 mm height).
     6 signalling LED.
     Four buttons for the system calibration.
     Extractable screw terminal blocks.

    INPUTS/OUTPUTS AND COMMUNICATION

     RS485 serial port for communication via protocols ModBus RTU,


    ASCII Laumas bidirectional or continuous one way transmission.
     3 relay outputs controlled by the setpoint values or via protocols.
     2 optoisolated PNP d igital i nputs: status reading v ia s erial
    communication protocols.
     1 load cell dedicated input.

    FIELDBUSESBUSES
    Version   02.2020

    Page  1 / 4
    TLB
    Digital / Analog weight Transmitter RS485

    DESCRIPTION CODE

    RS485 serial port.


    TLB485
    Baud rate: 2400, 4800, 9600, 19200, 38400, 115200 (bit/s).

    Optoisolated 16 bit analog output.


    Current: 0÷20 mA; 4÷20 mA (up to 300 ).
    TLB
    Voltage: 0÷10 V; 0÷5 V; ±10 V; ±5 V (min 10 k ).
    Equipped with RS485 serial port.

    CANopen port.
    Baud rate: 10, 20, 25, 50, 100, 125, 250, 500, 800, 1000 (kbit/s).
    TLBCANOPEN
    The instrument works as s lave in a synchronous CANopen network.
    Equipped with RS485 serial port.

    DeviceNet port.
    Baud rate: 125, 250, 500 (kbit/s).
    TLBDEVICENET
    The instrument works as s lave i n a DeviceNet network.
    Equipped with RS485 serial port.

    CC-Link port.
    Baud rate: 156, 625, 2500, 5000, 10000 (kbit/s).
    TLBCCLINK
    The instrument works as Remote Device Station in a CC-Link network and
    occupies 3 stations. Equipped with RS485 serial port.

    PROFIBUS DP port.
    Baud rate: up to 12 Mbit/s.
    TLBPROFI
    The instrument works as s lave i n a Profibus-DP network.
    Equipped with RS485 serial port.

    Modbus/TCP port.
    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBMODBUSTCP
    The instrument works as s lave in a Modbus/TCP network.
    Equipped with RS485 serial port.

    Ethernet TCP/IP port.


    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBETHETCP
    The instrument works in an Ethernet TCP/IP network and it is accessible via
    web browser. Equipped with RS485 serial port.

    2x Ethernet/IP ports.
    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBETHEIP
    The instrument works as adapter in an Ethernet/IP network.
    Equipped with RS485 serial port.

    2x PROFINET IO ports.
    Type: RJ45 100Base-TX.
    TLBPROFINETIO
    The instrument works as device in a Profinet IO network.
    Equipped with RS485 serial port.

    2x EtherCAT ports.
    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBETHERCAT
    The instrument works as s lave i n an EtherCAT network.
    Equipped with RS485 serial port.

    2x POWERLINK ports.
    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBPOWERLINK
    The instrument works as s lave i n a Powerlink network.
    Equipped with RS485 serial port.

    2x SERCOS III ports.


    Type: RJ45 10Base-T or 100Base-TX (auto-sensing).
    TLBSERCOS
    The instrument works as s lave in a Sercos III network.
    Version   02.2020

    Equipped with RS485 serial port.

    Page  2 / 4
    TLB
    Digital / Analog weight Transmitter RS485

    CERTIFICATIONS

    TECHNICAL FEATURES

    Version   02.2020

    Page  3 / 4
    TLB
    Digital / Analog weight Transmitter RS485

    MAIN FUNCTIONS

    Version   02.2020

    Page  4 / 4

    The information provided herein is to the best of our knowledge true and accurate, it is provided for guidance only. All specifications are subject to change without prior notification.
    Althen – Your expert partner in Sensors & Controls | althensensors.com
    Althen stands for pioneering measurement and custom sensor solutions. In addition we offer services such as calibration, design & engineering, training and renting of measurement equipment.
    Germany/Austria/Switzerland Benelux France Sweden USA/Canada Other countries
    [email protected] [email protected] [email protected] [email protected] [email protected] [email protected]

    You might also like