EUROLIGHT

DIESEL-ELECTRIC LOCOMOTIVE
Administrador de Infraestructuras Ferroviarias (ADIF), Spain

In October 2019, Stadler, in consortium with Erion, signed a contract with ADIF for the supply of 22 EUROLIGHT locomotives and
their maintenance for a period of eight years. In 2022, ADIF executed the option for 6 additional units. The locomotives are intended
for service on standard gauge (1.435 mm) high-speed railway lines carrying out line inspection, stranded train rescue operations,
snowploughing and transporting maintenance trains. They can operate in all weather conditions between +45ºC and -25ºC. In
November 2022, ADIF awarded Stadler another order for 12 Iberian gauge (1,668 mm) EUROLIGHT locomotives and 3 metric gauge
(1000mm) locomotives.
ADIF’s EUROLIGHT locomotives are diesel-electric Bo’Bo’ locomotives with 2,800kW engine power and AC traction system with
IGBT. They comply with all European standards on safety, emissions and environmental protection. Characterised by their high
power, light weight, high hauling capability and low operating costs, they enable the infrastructure manager to offer a wide range
of services to railway operators. The locomotives are fitted with two cabs, ETCS and ASFA signalling systems, GSM-R and Train-
to-Ground communication systems and GPS. They can reach a maximum speed of 160 km/h.

www.stadlerrail.com Stadler Rail Group Stadler Rail Valencia S.A.

Ernst-Stadler-Strasse 1 Pol. Ind. Mediterráneo. Mitjera 6

CH-9565 Bussnang E-46550 Albuixech (Valencia)
Phone +41 71 626 21 20 Phone +34 96 141 50 00
[email protected] [email protected]
Technical features Vehicle data

Technology

– A pplications: railway line inspection, rescue work, snow Customer ADIF

ploughing and maintenance support Operation area Spain
– Efficient alternating drive system with IGBT, one inverter per Number of vehicles 28 12
axle Commissioning 2023 2025
– Disc brakes Track gauge 1,435 mm 1,668 mm
– Electric brake energy recovery for auxiliaries Axle arrangement Bo’Bo’
– Lightweight, monocoque structure made of high strength steel Locomotive type Diesel-electric
– Multiple traction: up to 2 locomotives (WTB) Diesel engine CAT C175-16, Stage V
– Innovative adhesion control system Diesel engine powerl 2,800 kW
– Signalling systems: ETCS and ASFA Digital Transmission AC/AC
– C ommunication systems: GSM-R and Train-to-Earth Starting tractive effort 333 kN
– GPS global positioning system Continuous tractive effort 256 kN
Fuel tank 5.000 l
Comfort / Personnel Urea tank 500 l
Coupler Hybrid DAC type 2
– T wo air-conditioned, acoustically and thermally insulated Maximum speed 160 km/h
driver’s cabs Minimum curve radius 150 m (in operation)
– Ergonomically designed central driver’s desk 80 m (in depot)
– High levels of comfort, safety and visibility in the cab Wheel diameter (new) 1,100 mm
Brake system Mechanical: pneumatic
Reliability / Availability / Maintainability / Safety Dynamic: rheostatic
Suspension system Primary: coil springs
– B ased on subsystems and components from proven models Secondary: coil springs
such as the UKLIGHT locomotive Vertical and horizontal shock
– Reduced fuel consumption. Including energy-efficient absorbers
systems such as AESS and EFITren
– EC 26/2004 Stage V emissions compliance
– TSI compliance
– Modular design with removable roofs for ease of maintenance
– Video surveillance system with rear-view cameras
– LED interior and exterior lighting

© Stadler 2023. All rights reserved. The information contained herein is provided for informational purposes only, and is not intended to and should LEUROLIGHTADIF0423e
not be relied upon, or construed as legal advice regarding any specific issue or factual circumstance. Information contained herein may be changed
or updated without notice.